Alfen Eve Single S-Line out of sync, Steuerung nur bedingt möglich #7130
Replies: 13 comments 30 replies
-
|
Scheint als kann evcc Deine Box nicht abschalten obwohl wir das versuchen. Was sagt denn: |
Beta Was this translation helpful? Give feedback.
-
|
Anbei der Output: |
Beta Was this translation helpful? Give feedback.
-
|
Und jetzt bitte nochmal: /cc @premultiply warum bekommen wir hier Update also ist 16.0 als float32 (https://www.h-schmidt.net/FloatConverter/IEEE754.html). Wo kommen die her? Reset aufgrund fehlenden Heartbeats? Ist das Heartbeatintervall einstellbar und hier vllt. zu groß? |
Beta Was this translation helpful? Give feedback.
-
|
$ evcc charger --log trace,db:error --disable und $ evcc charger --log trace,db:error |
Beta Was this translation helpful? Give feedback.
-
|
Nein, einfach nur die Box mit integriertem Zähler. |
Beta Was this translation helpful? Give feedback.
-
|
Habt ihr noch weitere Ideen? Aktuell sagt EVCC auch "Ladebereit. Warte auf Fahrzeug" - Im Auto steht "Laden abgebrochen". Heute wurde die Wallbox an das Backend meines Arbeitgebers angebunden, dort wird sie auch noch als Offline angezeigt... evcc charger --log trace,db:error --disable |
Beta Was this translation helpful? Give feedback.
-
Vllt. ist sie einfach im Eimer? |
Beta Was this translation helpful? Give feedback.
-
|
Könnte natürlich auch sein. Stehe mit dem Hersteller in Kontakt. |
Beta Was this translation helpful? Give feedback.
-
|
Die Anbindung an das Backend-System hat inzwischen geklappt, nun läuft die Box mit evcc 0.115.0 auch stabil. Bis jetzt ist kein Fehler mehr aufgetaucht, automatischste Phasenumschaltung klappt… alles paletti. Danke für eure Hilfe! |
Beta Was this translation helpful? Give feedback.
-
|
Do you have an active balancing license? |
Beta Was this translation helpful? Give feedback.
-
|
Yes |
Beta Was this translation helpful? Give feedback.
-
|
Ich habe bei mir das selbe problem. Wenn ich auf solar gehe wird einfach voll geladen un ich bekomme bei mir auch immer die naricht: Die config ist bei mir gleich ausser das ich ein model 3 habe. Anbei noch meine log files: |
Beta Was this translation helpful? Give feedback.
-
|
@Peter1984Git Mich wurde mal interessieren was in der alfen app bei dir unter backoffice und dan (Central meter, Meter value, transaction data und websocket) steht. |
Beta Was this translation helpful? Give feedback.
-
|
Central Meter:
Meter Value:
Transaction Data:
Websocket:
Die Werte habe ich hier irgendwo in den Discussions gefunden. |
Beta Was this translation helpful? Give feedback.
-
|
Danke @Peter1984Git, bekomme leider noch immer die |
Beta Was this translation helpful? Give feedback.
-
|
Firmware ist aktuell? |
Beta Was this translation helpful? Give feedback.
-
|
Ja, habe ich gestern noch aktualisiert. Interval ist eingestellt auf 30s. |
Beta Was this translation helpful? Give feedback.
-
|
Bitte mal auf Default 10s lassen. |
Beta Was this translation helpful? Give feedback.
-
|
Auch met 10s leider noch immer die meldung :( |
Beta Was this translation helpful? Give feedback.
-
|
When I have those problems with my alfen, the solution is this:
I’ve just done that this morning. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for suggestion I'll give that a try! |
Beta Was this translation helpful? Give feedback.
-
|
Also modify this |
Beta Was this translation helpful? Give feedback.
-
|
The last setting indeed fixed the warning for me! It's working correctly now. Thanks a lot 😄 |
Beta Was this translation helpful? Give feedback.
-
Could you send me your final settings for the Alfen ACE installer + interval settings in evcc? |
Beta Was this translation helpful? Give feedback.
-
|
hey, I've been trying to get rid of the error message "charger out of sync: expected disabled, got enabled" for a few days. I use an Alfen double Pro, which is connected via LAN. I've already tried out a few combinations of settings. Unfortunately without success. The charging process stops with every “charger out of sync: expected disabled, got enabled”. here are my current settings. evcc interval: 12s Which working settings do other Alfen users use? Best regards |
Beta Was this translation helpful? Give feedback.
-
|
I have the same charger. |
Beta Was this translation helpful? Give feedback.
-
|
ah ok, thank you - that´s the trick :)Is the problem permanent solved (until the evcc is restarted) or does the system lose synchronicity after days/weeks? Do you also have the same settings like me? Since the Alfen pro double is not available with fixed cables, I, in coordination with Alfen support, assigned two permanently plugged cables to the two sockets and selected "fixed cables" in the settings.
Did you solve it that way? the cables should get plugged in the wallbox-side when restarting to initialize? |
Beta Was this translation helpful? Give feedback.
-
|
I have the same settings, fixed cable. |
Beta Was this translation helpful? Give feedback.
-
|
Unfortunately, I had no success with the procedure described. After some time I get the message again: "charger out of sync: expected enabled, got disabled" The charging process then stops and starts again some time later. Are there any other solutions regarding the settings in the Alfen Wallbox or in EVCC? |
Beta Was this translation helpful? Give feedback.
-
|
My usual error is the other way, as seend in the above picture.
|
Beta Was this translation helpful? Give feedback.
-
|
to 1: yes i have the active balancing licence
|
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
All looks good then. But to have the errors one after the other seems illogical. the thing is that one is LP1, the other is LP2 You know that only ONE port can work with EVCC, not both o the same time. |
Beta Was this translation helpful? Give feedback.
-
|
that sounds logical, but is it really the case that I can only use one connection of the Alfen Double Pro with evcc? The documentation provides the settings as I made them. Would it be possible to work with a modbus proxy to get around this restriction? I absolutely need both Alfen sockets in evcc :)
|
Beta Was this translation helpful? Give feedback.
-
|
It cannot work. |
Beta Was this translation helpful? Give feedback.
-
|
@Macrisu I also struggeling to get a Alfen Double pro line to work with evcc. I have the problem, the charging starts and stops immedatily after 1-2 seconds. I've also tried this with mpboll and i get the same behaviour. The Wallbox is configured as standalone (no backoffice connected) and has the Active Load Balancing Licence. Does your wallbox have the SCN licence? Mine didn't not... Could you share all your settings in the ACE installer? Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
But why does the evcc documentation recommend this variant? Many things (charging current of the ports, control of the charging processes) work very well. I am disillusioned at the moment because I assumed that only a small thing (timeouts etc.) was the problem. |
Beta Was this translation helpful? Give feedback.
-
|
It is not recommendation, it is an information. now one port steal all the excess and thenother is stopping the charge. |
Beta Was this translation helpful? Give feedback.
-
|
OK, thank you for the tip. Does the system work within evcc if I charge constantly at one of the two ports? (min+pv or fast) Or do you think I should exclude one port from the charging management system on the Alfen Wallbox? |
Beta Was this translation helpful? Give feedback.
-
Describe the bug
Ich musste meine Wallbox tauschen und habe die evcc.yaml komplett neu angelegt.
Ich erhalte die Meldung "charger out of sync: expected disabled, got enabled", werde aus dem Logfile aber nicht schlau.
Zudem reagiert die GUI nicht, wenn ich z.B. von "PV" auf "aus" stelle, evcc lädt einfach weiter.
Zudem wird gefühlt auch "bufferSOC" ignoriert, der Akku wird zumindest teilweise entladen.
Die Alfen müsste auch bereits ab knapp über 1 kw PV-Überschuss laden, korrekt?
Anbei Logfile und evcc.yaml.
Danke!
Steps to reproduce
Reboot hilft nicht.
Configuration details
Log details
What type of operating system are you running?
Linux
Version
114.1
Beta Was this translation helpful? Give feedback.
All reactions