- Authors
- Josh Bailey
ZodiacFX is a small 4 port multi table OF1.3 switch from Northbound Networks.
- ZodiacFX allows only one controller (so you cannot run Gauge).
- The default OF port is 6633; it is recommended to use 6653.
- It is recommended to enable ether type filtering to minimize corrupt packets.
You can use the following expect script to program the recommended configuration:
conf-zodiac.sh
Example of running the script:
$ sudo ./conf-zodiac.sh
spawn [open ...]
get initial prompt
_____ ___ _______ __
/__ / ____ ____/ (_)___ ______ / ____/ |/ /
/ / / __ \/ __ / / __ `/ ___/ / /_ | /
/ /__/ /_/ / /_/ / / /_/ / /__ / __/ / |
/____/\____/\__,_/_/\__,_/\___/ /_/ /_/|_|
by Northbound Networks
Type 'help' for a list of available commands
Zodiac_FX#
Zodiac_FX# found initial prompt
config
Zodiac_FX(config)# setting ethertype-filter
set ethertype-filter enable
EtherType Filtering Enabled
Zodiac_FX(config)# setting of-portset of-port 6653
OpenFlow Port set to 6653
Zodiac_FX(config)# save
Writing Configuration to EEPROM (197 bytes)
Zodiac_FX(config)# exit
Zodiac_FX# restart
Restarting the Zodiac FX, please reopen your terminal application.