Skip to content

Latest commit

 

History

History
60 lines (45 loc) · 1.62 KB

README_ZodiacFX.rst

File metadata and controls

60 lines (45 loc) · 1.62 KB
Raw
Authors
  • Josh Bailey

Faucet on ZodiacFX

Introduction

ZodiacFX is a small 4 port multi table OF1.3 switch from Northbound Networks.

Caveats

  • ZodiacFX allows only one controller (so you cannot run Gauge).
  • The default OF port is 6633; it is recommended to use 6653.
  • It is recommended to enable ether type filtering to minimize corrupt packets.

Applying recommended config

You can use the following expect script to program the recommended configuration:

conf-zodiac.sh

Example of running the script:

$ sudo ./conf-zodiac.sh
spawn [open ...]
get initial prompt

 _____             ___               _______  __
/__  /  ____  ____/ (_)___ ______   / ____/ |/ /
  / /  / __ \/ __  / / __ `/ ___/  / /_   |   /
 / /__/ /_/ / /_/ / / /_/ / /__   / __/  /   |
/____/\____/\__,_/_/\__,_/\___/  /_/    /_/|_|
            by Northbound Networks


Type 'help' for a list of available commands

Zodiac_FX#
Zodiac_FX# found initial prompt
config
Zodiac_FX(config)# setting ethertype-filter
set ethertype-filter enable
EtherType Filtering Enabled
Zodiac_FX(config)# setting of-portset of-port 6653
OpenFlow Port set to 6653
Zodiac_FX(config)# save
Writing Configuration to EEPROM (197 bytes)
Zodiac_FX(config)# exit
Zodiac_FX# restart
Restarting the Zodiac FX, please reopen your terminal application.