Skip to content

Latest commit

 

History

History
548 lines (370 loc) · 45.3 KB

README.md

File metadata and controls

548 lines (370 loc) · 45.3 KB

li⬅ Index of all go-profiler-notes

The Busy Developer's Guide to Go Profiling, Tracing and Observability

🚧 This document is a work in progress. All sections above will become clickable links over time. The best way to find out about updates is to follow me and my thread on twitter where I'll announce new sections being added.

Introduction

Read This

This is a practical guide aimed at busy gophers interested in improving their programs using profiling, tracing and other observability techniques. If you're not well versed in the internals of Go, it is recommended that you read the entire introduction first. After that you should feel free to jump to any section you are interested in.

Mental Model for Go

It is possible to become quite proficient in writing Go code without understanding how the language works under the hood. But when it comes to performance and debugging, you'll hugely benefit from having a mental model of the internals. Therefore we'll begin with laying out a rudimentary model of Go below. This model should be good enough to allow you to avoid the most common mistakes, but all models are wrong, so you are encouraged to seek out more in-depth material to tackle harder problems in the future.

Go's primary job is to multiplex and abstract hardware resources, similar to an operating system. This is generally accomplished using two major abstractions:

  1. Goroutine Scheduler: Manages how your code is being executed on the CPUs of your system.
  2. Garbage Collector: Provides virtual memory that is automatically freed as needed.

Goroutine Scheduler

Let's talk about the scheduler first using the example below:

func main() {
    res, err := http.Get("https://example.org/")
    if err != nil {
        panic(err)
    }
    fmt.Printf("%d\n", res.StatusCode)
}

Here we have a single goroutine, let's call it G1, that runs the main function. The picture below shows a simplified timeline of how this goroutine might execute on a single CPU. Initially G1 is running on the CPU to prepare the http request. Then the CPU becomes idle as the goroutine has to wait for the network. And finally it gets scheduled onto the CPU again to print out the status code.

From the scheduler's perspective, the program above executes like shown below. At first G1 is Executing on CPU 1. Then the goroutine is taken off the CPU while Waiting for the network. Once the scheduler notices that the network has replied (using non-blocking I/O, similar to Node.js), it marks the goroutine as Runnable. And as soon as a CPU core becomes available, the goroutine starts Executing again. In our case all cores are available, so G1 can go back to Executing the fmt.Printf() function on one of the CPUs immediately without spending any time in the Runnable state.

Most of the time, Go programs are running multiple goroutines, so you will have a few goroutines Executing on some of the CPU cores, a large number of goroutines Waiting for various reasons, and ideally no goroutines Runnable unless your program exhibits very high CPU load. An example of this can be seen below.

Of course the model above glosses over many details. In reality it's turtles all the way down, and the Go scheduler works on top of threads managed by the operating system, and even CPUs themselves are capable of hyper-threading which can be seen as a form of scheduling. So if you're interested, feel free to continue down this rabbit hole via Ardan labs series on Scheduling in Go or similar material.

However, the model above should be sufficient to understand the remainder of this guide. In particular it should become clear that the time measured by the various Go profilers is essentially the time your goroutines are spending in the Executing and Waiting states as illustrated by the diagram below.

Garbage Collector

The other major abstraction in Go is the garbage collector. In languages like C, the programmer needs to manually deal with allocating and releasing memory using malloc() and free(). This offers great control, but turns out to be very error prone in practice. A garbage collector can reduce this burden, but the automatic management of memory can easily become a performance bottleneck. This section of the guide will present a simple model for Go's GC that should be useful for identifying and optimizing memory management related problems.

For a more in-depth guide on Go's GC, refer to the official documentation.

The Stack

Let's start with the basics. Go can allocate memory in one of two places, the stack or the heap. Each goroutine has its own stack which is a contiguous area of memory. Additionally there is a big area of memory shared between goroutines that is called the heap. This can be seen in the picture below.

When a function calls another function it gets its own section on the stack called a stack frame where it can place things like local variables. A stack pointer is used to identify the next free spot in the frame. When a function returns, the data from the last frame is discarded by simply moving the stack pointer back to end of the previous frame. The frame's data itself can linger on the stack, and gets overwritten by the next function call. This is very simple and efficient as Go doesn't have to keep track of each variable.

To make this a little more intuitive, let's look at the example below:

func main() {
	sum := 0
	sum = add(23, 42)
	fmt.Println(sum)
}

func add(a, b int) int {
	return a + b
}

Here we have a main() function that starts out by reserving some space on the stack for the variable sum. When the add() function gets called, it gets its own frame to hold the local a and b parameters. Once the add() returns, its data is discarded by moving the stack pointer back to the end of the main() function's frame, and the sum variable gets updated with the result. Meanwhile the old values of add() linger beyond the stack pointer to be overwritten by the next function call. Below is a visualization of this process:

The example above is highly simplified and omits many details around return values, frame pointers, return addresses and function inlining. In fact, as of Go 1.17, the program above may not even need any space on the stack as the small amount of data can be managed using CPU registers by the compiler. But that's okay. This model should still give you a reasonable intuition for the way non-trivial Go programs allocate and discard local variables on the stack.

One thing you might wonder at this point is what happens if you run out of space on the stack. In languages like C this would cause a stack overflow error. Go on the other hand automatically deals with this problem by making a copy of the stack that's twice as big. This allows goroutines to start out with very small, typically 2 KiB stacks, and is one of the key ingredients for making goroutines more scalable than operating system threads.

Another aspect of the stack is how it's involved in creating stack traces. This is a bit more advanced, but if you're interested check out the Stack Traces in Go document in this repo.

The Heap

Stack allocations are great, but there are many situations where Go can't utilize them. The most common one is returning a pointer to a local variable of a function. This can be seen in this modified version of our add() example from above:

func main() {
	fmt.Println(*add(23, 42))
}

func add(a, b int) *int {
	sum := a + b
	return &sum
}

Normally Go would be able to allocate the sum variable inside of the add() function on the stack. But as we've learned, this data gets discarded when the add() function returns. So in order to safely return a &sum pointer, Go has to allocate the memory for it from outside of the stack. And that's where the heap comes in.

The heap is used for storing data that might outlive the function that creates it, as well as for any data that is shared between goroutines using pointers. However, this raises the question of how this memory gets freed. Because unlike stack allocations, heap allocations can't be discarded when the function that created them returns.

Go solves this problem using its built-in garbage collector. The details of its implementation are very complex, but from a birds eye view, it keeps track of your memory as shown in the picture below. Here you can see three goroutines that have pointers to green allocations on the heap. Some of these allocations also have pointers to other allocations shown in green. Additionally there are grey allocations that may point to the green allocations or each other, but they are not referenced by a green allocation themselves. Those allocations were once reachable, but are now considered to be garbage. This can happen if the function that allocated their pointers on the stack returned, or their value was overwritten. The GC is responsible for automatically identifying and freeing those allocations.

Performing GC involves a lot of expensive graph traversal and cache thrashing. It even requires regular stop-the-world phases that halt the execution of your entire program. Luckily recent versions of Go have gotten this down to fractions of a millisecond, but much of the remaining overhead is inherent to any GC. In fact, it's not uncommon that 20-30% of a Go program's execution are spend on memory management.

Generally speaking the cost of GC is proportional to the amount of heap allocations your program performs. So when it comes to optimizing the memory related overhead of your program, the mantra is:

  • Reduce: Try to turn heap allocations into stack allocations or avoid them altogether. Minimizing the number of pointers on the heap also helps.
  • Reuse: Reuse heap allocations rather than replacing them with new ones.
  • Recycle: Some heap allocations can't be avoided. Let the GC recycle them and focus on other issues.

As with the previous mental model in this guide, everything above is an extremely simplified view of reality. But hopefully it will be good enough to make sense out of the remainder of this guide, and inspire you to read more articles on the subject. One article you should definitely read is Getting to Go: The Journey of Go's Garbage Collector which gives you a good idea of how Go's GC has advanced over the years, and the pace at which it is improving.

Go Profilers

Here is an overview of the profilers built into the Go runtime. For more details following the links.

CPU Memory Block Mutex Goroutine ThreadCreate
Production Safety ⚠ (1.) ⚠️ (2.) 🐞 (3.)
Safe Rate default default ❌ (1.) 100 1000 goroutines -
Accuracy ⭐️⭐ ⭐⭐⭐ ⭐⭐⭐ ⭐⭐⭐ ⭐⭐⭐ -
Max Stack Depth 64 32 32 32 32 - 100 (4.) -
Profiler Labels -
  1. The block profiler can be a significant source of CPU overhead if configured incorrectly. See the warning.
  2. One O(N) stop-the-world pauses where N is the number of goroutines. Expect ~1-10µsec pause per goroutine.
  3. Totally broken, don't try to use it.
  4. Depends on the API.

CPU Profiler

Go's CPU profiler can help you identify which parts of your code base consume a lot of CPU time.

⚠️ Please note that CPU time is usually different from the real time experienced by your users (aka latency). For example a typical http request might take 100ms to complete, but only consume 5ms of CPU time while waiting for 95ms on a database. It's also possible for a request to take 100ms, but spend 200ms of CPU if two goroutines are performing CPU intensive work in parallel. If this is confusing to you, please refer to the Goroutine Scheduler section.

You can control the CPU profiler via various APIs:

If you need a quick snippet to paste into your main() function, you can use the code below:

file, _ := os.Create("./cpu.pprof")
pprof.StartCPUProfile(file)
defer pprof.StopCPUProfile()

Regardless of how you activate the CPU profiler, the resulting profile will essentially be a table of stack traces formatted in the binary pprof format. A simplified version of such a table is shown below:

stack trace samples/count cpu/nanoseconds
main;foo 5 50000000
main;foo;bar 3 30000000
main;foobar 4 40000000

The CPU profiler captures this data by asking the operating system to monitor the CPU usage of the application and sends it a SIGPROF signal for every 10ms of CPU time it consumes. The OS also includes time consumed by the kernel on behalf of the application in this monitoring. Since the signal deliver rate depends on CPU consumption, it's dynamic and can be up to N * 100Hz where N is the number of logical CPU cores on the system. When a SIGPROF signal arrives, Go's signal handler captures a stack trace of the currently active goroutine, and increments the corresponding values in the profile. The cpu/nanoseconds value is currently directly derived from the sample count, so it is redundant, but convenient.

CPU Profiler Labels

A cool feature of Go's CPU profiler is that you can attach arbitrary key value pairs to a goroutine. These labels will be inherited by any goroutine spawned from that goroutine and show up in the resulting profile.

Let's consider the example below that does some CPU work() on behalf of a user. By using the pprof.Labels() and pprof.Do() API, we can associate the user with the goroutine that is executing the work() function. Additionally the labels are automatically inherited by any goroutine spawned within the same code block, for example the backgroundWork() goroutine.

func work(ctx context.Context, user string) {
	labels := pprof.Labels("user", user)
	pprof.Do(ctx, labels, func(_ context.Context) {
		go backgroundWork()
		directWork()
	})
}

The resulting profile will include a new label column and might look something like this:

stack trace label samples/count cpu/nanoseconds
main.backgroundWork user:bob 5 50000000
main.backgroundWork user:alice 2 20000000
main.work;main.directWork user:bob 4 40000000
main.work;main.directWork user:alice 3 30000000

Viewing the same profile with pprof's Graph view will also include the labels:

How you use these labels is up to you. You might include things such as user ids, request ids, http endpoints, subscription plan or other data that can allow you to get a better understanding of what types of requests are causing high CPU utilization, even when they are being processed by the same code paths. That being said, using labels will increase the size of your pprof files. So you should probably start with low cardinality labels such as endpoints before moving on to high cardinality labels once you feel confident that they don't impact the performance of your application.

⚠️ Go 1.17 and below contained several bugs that could cause some profiler labels to be missing from CPU profiles, see CPU Profiler Limitations for more information.

CPU Utilization

Since the sample rate of the CPU profiler adapts to amount of CPU your program is consuming, you can derive the CPU utilization from CPU profiles. In fact pprof will do this automatically for you. For example the profile below was taking from a program that had an average CPU utilization of 147.77%:

$ go tool pprof guide/cpu-utilization.pprof
Type: cpu
Time: Sep 9, 2021 at 11:34pm (CEST)
Duration: 1.12s, Total samples = 1.65s (147.77%)
Entering interactive mode (type "help" for commands, "o" for options)
(pprof) 

Another popular way to express CPU utilization is CPU cores. In the example above the program was using an average of 1.47 CPU cores during the profiling period.

⚠️ In Go 1.17 and below you shouldn't put too much trust in this number if it's near or higher than 250%, see CPU Profiler Limitations. However, if you see a very low number such as 10% this usually indicates that CPU consumption is not an issue for your application. A common mistake is to ignore this number and start worrying about a particular function taking up a long time relative to the rest of the profile. This is usually a waste of time when overall CPU utilization is low, as not much can be gained from optimizing this function.

System Calls in CPU Profiles

If you see system calls such as syscall.Read() or syscall.Write() using a lot of time in your CPU profiles, please note that this is only the CPU time spend inside of these functions in the kernel. The I/O time itself is not being tracked. Spending a lot of time on system calls is usually a sign of making too many of them, so perhaps increasing buffer sizes can help. For more complicated situations like this, you should consider using Linux perf, as it can also show you kernel stack traces that might provide you with additional clues.

CPU Profiler Limitations

There are a few known issues and limitations of the CPU profiler that you might want to be aware of:

  • 🐞 GH #35057: CPU profiles taken with Go versions <= 1.17 become somewhat inaccurate for programs utilizing more than 2.5 CPU cores. Generally speaking the overall CPU utilization will be underreported, and workload spikes may be underrepresented in the resulting profile as well. This is fixed in Go 1.18. Meanwhile you could try to use Linux perf as a workaround.
  • 🐞 Profiler labels in Go versions <= 1.17 suffered from several bugs.
    • GH #48577 and CL 367200: Labels were missing for goroutines executing on the system stack, executing C code, or making system calls.
    • CL 369741: The first batch of samples in a CPU profile had an off-by-one error causing a misattribution of labels.
    • CL 369983: System goroutines created on behalf of user goroutines (e.g. for garbage collection) incorrectly inherited their parents labels.
  • ⚠️️ You can call runtime.SetCPUProfileRate() to adjust the CPU profiler rate before calling runtime.StartCPUProfile(). This will print a warning saying runtime: cannot set cpu profile rate until previous profile has finished. However, it still works within the limitation of the bug mentioned above. This issue was initially raised here, and there is an accepted proposal for improving the API.
  • ⚠️ The maximum number of nested function calls that can be captured in stack traces by the CPU profiler is currently 64. If your program is using a lot of recursion or other patterns that lead to deep stack depths, your CPU profile will include stack traces that are truncated. This means you will miss parts of the call chain that led to the function that was active at the time the sample was taken.

Memory Profiler

Go's memory profiler can help you identify which parts of your code base perform a lot of heap allocations, as well as how many of these allocations were still reachable during the last garbage collection. Because of this, the profile produced by the memory profiler is also often referred to as a heap profile.

Heap memory management related activities are often responsible for up to 20-30% of CPU time consumed by Go processes. Additionally the elimination of heap allocations can have second order effects that speed up other parts of your code due to decreasing the amount of cache thrashing that occurs when the garbage collector has to scan the heap. This means that optimizing memory allocations can often have a better return on investment than optimizing CPU-bound code paths in your program.

⚠️ The memory profiler does not show stack allocations as these are generally much cheaper than heap allocations. Please refer to the Garbage Collector section for more details.

You can control the memory profiler via various APIs:

  • go test -memprofile mem.pprof will run your tests and write a memory profile to a file named mem.pprof.
  • pprof.Lookup("allocs").WriteTo(w, 0) writes a memory profile that contains allocation events since the start of the process to w.
  • import _ "net/http/pprof" allows you to request a 30s memory profile by hitting the GET /debug/pprof/allocs?seconds=30 endpoint of the default http server that you can start via http.ListenAndServe("localhost:6060", nil). This is also called a delta profile internally.
  • runtime.MemProfileRate lets you to control the sampling rate of the memory profiler. See Memory Profiler Limitations for current limitations.

If you need a quick snippet to paste into your main() function, you can use the code below:

file, _ := os.Create("./mem.pprof")
defer pprof.Lookup("allocs").WriteTo(file, 0)
defer runtime.GC()

Regardless of how you activate the Memory profiler, the resulting profile will essentially be a table of stack traces formatted in the binary pprof format. A simplified version of such a table is shown below:

stack trace alloc_objects/count alloc_space/bytes inuse_objects/count inuse_space/bytes
main;foo 5 120 2 48
main;foo;bar 3 768 0 0
main;foobar 4 512 1 128

A memory profile contains two major pieces of information:

  • alloc_*: The amount of allocations that your program has made since the start of the process (or profiling period for delta profiles).
  • inuse_*: The amount of allocations that your program has made that were still reachable during the last GC.

You can use this information for various purposes. For example you can use the alloc_* data to determine which code paths might be producing a lot of garbage for the GC to deal with, and looking at the inuse_* data over time can help you with investigating memory leaks or high memory usage by your program.

Allocs vs Heap Profile

The pprof.Lookup() function as well as net/http/pprof package expose the memory profile under two names: allocs and heap. Both profiles contain the same data, the only difference is that the allocs profile has alloc_space/bytes set as the default sample type, whereas the heap profile defaults to inuse_space/bytes. This is used by the pprof tool to decide which sample type to show by default.

Memory Profiler Sampling

To keep overhead low, the memory profiler uses poisson sampling so that on average only one allocation every 512KiB triggers a stack trace to be taken and added to the profile. However, before the profile is written into the final pprof file, the runtime scales the collected sample values by dividing them through the sampling probability. This means that the amount of reported allocations should be a good estimate of the actual amount of allocations, regardless of the runtime.MemProfileRate you are using.

For profiling in production, you should generally not have to modify the sampling rate. The only reason for doing so is if you're worried that not enough samples are getting collected in situations where very few allocations are taking place.

Memory Inuse vs RSS

A common confusion is looking at the total amount of memory reported by the inuse_space/bytes sample type, and noticing that it doesn't match up with the RSS memory usage reported by the operating system. There are various reasons for this:

  • RSS includes a lot more than just Go heap memory usage by definition, e.g. the memory used by goroutine stacks, the program executable, shared libraries as well as memory allocated by C functions.
  • The GC may decide to not return free memory to the OS immediately, but this should be a lesser issue after runtime changes in Go 1.16.
  • Go uses a non-moving GC, so in some cases free heap memory might be fragmented in ways that prevent Go from releasing it to the OS.

Memory Profiler Implementation

The pseudo code below should capture the essential aspects of the memory profiler's implementation to give you a better intuition for it. As you can see, the malloc() function inside of the Go runtime uses poisson_sample(size) to determine if an allocation should be sampled. If yes, a stack trace s is taken and used as the key in the mem_profile hash map to increment the allocs and alloc_bytes counters. Additionally the track_profiled(object, s) call marks the object as a sampled allocation on the heap and associates the stack trace s with it.

func malloc(size):
  object = ... // allocation magic

  if poisson_sample(size):
    s = stacktrace()
    mem_profile[s].allocs++
    mem_profile[s].alloc_bytes += size
    track_profiled(object, s)

  return object

When the GC determines that it is time to free an allocated object, it calls sweep() which uses is_profiled(object) to check if the object is marked as a sampled object. If yes, it retrieves the stack trace s that lead to the allocation, and increments the frees and free_bytes counters for it inside of the mem_profile.

func sweep(object):
  if is_profiled(object)
    s = alloc_stacktrace(object)
    mem_profile[s].frees++
    mem_profile[s].free_bytes += sizeof(object)

	// deallocation magic

The free_* counters themselves are not included in the final memory profile. Instead they are used to calculate the inuse_* counters in the profile via simple allocs - frees subtraction. Additionally the final output values are scaled by dividing them through their sampling probability.

Memory Profiler Limitations

There are a few known issues and limitations of the memory profiler that you might want to be aware of:

  • 🐞 GH #49171: Delta profiles (taken with e.g. GET /debug/pprof/allocs?seconds=60) may report negative allocation counts due to a symbolization bug involving inlined closures in Go 1.17. It's fixed in Go 1.18.
  • ⚠️ runtime.MemProfileRate must only be modified once, as early as possible in the startup of the program; for example, at the beginning of main(). Writing this value is inherently a small data race, and changing it multiple times during program execution will produce incorrect profiles.
  • ⚠ When debugging potential memory leaks, the memory profiler can show you where those allocations were created, but it can't show you which references are keeping them alive. A few attempts to solve this problem were made over the years, but none of them work with recent versions of Go. If you know about a working tool, please let me know.
  • CPU Profiler Labels or similar are not supported by the memory profiler. It's difficult to add this feature to the current implementation as it could create a memory leak in the internal hash map that holds the memory profiling data.
  • ⚠ Allocations made by cgo C code don't show up in the memory profile.
  • ⚠ Memory profile data may be up to two garbage collection cycles old. If you want a more consistent point-in-time snapshot, consider calling runtime.GC() before requesting a memory profile. net/http/pprof accepts a ?gc=1 argument for this purpose. For more information see the runtime.MemProfile() docs, as well as as the comment on memRecord in mprof.go.
  • ⚠️ The maximum number of nested function calls that can be captured in stack traces by the memory profiler is currently 32, see CPU Profiler Limitations for more information on what happens when you exceed this limit.
  • ⚠️ There is no size limit for the internal hash map that holds the memory profile. This means it will grow in size until it covers all allocating code paths in your code base. This is not a problem in practice, but might look like a small memory leak if you're observing the memory usage of your process.

Block Profiler

The block profiler in Go measures how much time your goroutines spend Off-CPU while waiting for channel as well as mutex operations provided by the sync package. The following Go operations are hooked up to the block profiler:

⚠️ Block profiles do not include time spend waiting on I/O, Sleep, GC and various other waiting states. Additionally blocking events are not recorded until they have completed, so the block profile can't be used to debug why a Go program is currently hanging. The latter can be determined using the Goroutine Profiler.

You can control the block profiler via various APIs:

  • go test -blockprofile block.pprof will run your tests and write a block profile that captures every blocking event to a file named block.pprof.
  • runtime.SetBlockProfileRate(rate) lets you to enable and control the sampling rate of the block profiler.
  • pprof.Lookup("block").WriteTo(w, 0) writes a block profile that contains blocking events since the start of the process to w.
  • import _ "net/http/pprof" allows you to request a 30s block profile by hitting the GET /debug/pprof/block?seconds=30 endpoint of the default http server that you can start via http.ListenAndServe("localhost:6060", nil). This is also called a delta profile internally.

If you need a quick snippet to paste into your main() function, you can use the code below:

runtime.SetBlockProfileRate(100_000_000) // WARNING: Can cause some CPU overhead
file, _ := os.Create("./block.pprof")
defer pprof.Lookup("block").WriteTo(file, 0)

Regardless of how you activate the block profiler, the resulting profile will essentially be a table of stack traces formatted in the binary pprof format. A simplified version of such a table is shown below:

stack trace contentions/count delay/nanoseconds
main;foo;runtime.selectgo 5 867549417
main;foo;bar;sync.(*Mutex).Lock 3 453510869
main;foobar;runtime.chanrecv1 4 5351086

Block Profiler Implementation

The pseudo code below should capture the essential aspects of the block profiler's implementation to give you a better intuition for it. When sending a message to channel, i.e. ch <- msg, Go invokes the chansend() function in the runtime that is shown below. If the channel is ready() to receive the message, the send() happens immediately. Otherwise the block profiler captures the start time of the blocking event and uses wait_until_ready() to ask the scheduler to move the goroutine off the CPU until the channel is ready. Once the channel is ready, the blocking duration is determined and used by random_sample() along with the sampling rate to decide if this block event should be recorded. If yes, the current stack trace s is captured and used as a key inside of the block_profile hash map to increment the count and delay values. After that the actual send() operation proceeds.

func chansend(channel, msg):
  if ready(channel):
    send(channel, msg)
    return

  start = now()
  wait_until_ready(channel) // Off-CPU Wait
  duration = now() - start

  if random_sample(duration, rate):
    s = stacktrace()
    // note: actual implementation is a bit trickier to correct for bias
    block_profile[s].contentions += 1
    block_profile[s].delay += duration

  send(channel, msg)

The random_sample function looks like shown below. If the block profiler is enabled, all events where duration >= rate are captured, and shorter events have a duration/rate chance of being captured.

func random_sample(duration, rate):
  if rate <= 0 || (duration < rate && duration/rate > rand(0, 1)):
    return false
  return true

In other words, if you set rate to 10.000 (the unit is nanoseconds), all blocking events lasting 10 µsec or longer are captured. Additionally 10% of events lasting 1 µsec and 1% of events lasting 100 nanoseconds, and so on, are captured as well.

Block vs Mutex Profiler

Both block and mutex profiler report time waiting on mutexes. The difference is that the block profiler captures the time waiting to acquire a Lock(), whereas the mutex profiler captures the time another goroutine was waiting before Unlock() allowed it to proceed.

In other words, the block profiler shows you which goroutines are experiencing increased latency due to mutex contentions whereas the mutex profiler shows you the goroutines that are holding the locks that are causing the contention.

Block Profiler Limitations

  • 🚨 The block profiler can cause significant CPU overhead in production, so it's recommended to only use it for development and testing. If you do need to use it in production, start out with a very high rate, perhaps 100 million, and lower it only if needed. In the past this guide recommended a rate of 10,000 as safe, but we saw production workloads suffering up to 4% overhead under this setting, and even rates up to 10 million were not sufficient to significantly reduce the overhead.
  • ⚠ Block profiles cover only a small subset of Off-CPU waiting states a goroutine can enter.
  • ⚠️ The maximum number of nested function calls that can be captured in stack traces by the memory profiler is currently 32, see CPU Profiler Limitations for more information on what happens when you exceed this limit.
  • ⚠️ There is no size limit for the internal hash map that holds the block profile. This means it will grow in size until it covers all blocking code paths in your code base. This is not a problem in practice, but might look like a small memory leak if you're observing the memory usage of your process.
  • CPU Profiler Labels or similar are not supported by the block profiler. It's difficult to add this feature to the current implementation as it could create a memory leak in the internal hash map that holds the memory profiling data.
  • 🐞 Go 1.17 fixed a long-standing sampling bias bug in the block profiler. Older versions of Go will overreport the impact of infrequent long blocking events over frequent short events.

Mutex profiler

The mutex profiler measures how long goroutines spend blocking other goroutines. In other words, it measures the sources of lock contention. The mutex profiler can capture contention coming from sync.Mutex and sync.RWMutex.

⚠️ Mutex profiles do not include other sources of contention such as sync.WaitGroup, sync.Cond, or accessing file descriptors. Additionally, mutex contention is not recorded until the mutex is unlocked, so the mutex profile can't be used to debug why a Go program is currently hanging. The latter can be determined using the Goroutine Profiler.

You can control the mutex profiler via various APIs:

  • go test -mutexprofile mutex.pprof will run your tests and write a mutex profile to a file named mutex.pprof.
  • runtime.SetMutexProfileRate(rate) lets you to enable and control the sampling rate of the mutex profiler. If you set a sampling rate of R, then an average of 1/R mutex contention events are captured. If the rate is 0 or less, nothing is captured.
  • pprof.Lookup("mutex").WriteTo(w, 0) writes a mutex profile that contains mutex events since the start of the process to w.
  • import _ "net/http/pprof" allows you to request a 30s mutex profile by hitting the GET /debug/pprof/mutex?seconds=30 endpoint of the default http server that you can start via http.ListenAndServe("localhost:6060", nil). This is also called a delta profile internally.

If you need a quick snippet to paste into your main() function, you can use the code below:

runtime.SetMutexProfileFraction(100)
file, _ := os.Create("./mutex.pprof")
defer pprof.Lookup("mutex").WriteTo(file, 0)

The resulting mutex profile will essentially be a table of stack traces formatted in the binary pprof format. A simplified version of such a table is shown below:

stack trace contentions/count delay/nanoseconds
main;foo;sync.(*Mutex).Unlock 5 867549417
main;bar;baz;sync.(*Mutex).Unlock 3 453510869
main;foobar;sync.(*RWMutex).RUnlock 4 5351086

⚠️ See the section on block vs mutex profiles for the difference between the two profiles.

Mutex profiler implementation

The mutex profiler is implemented by recording the time from when a goroutine tries to acquire a lock (e.g. mu.Lock()) to when the lock is released by the goroutine holding the lock (e.g. mu.Unlock()). First, a goroutine calls semacquire() to take the lock, and records the time it started waiting if the lock is already held. When the goroutine holding the lock releases it by calling semrelease(), the goroutine will look for the next goroutine waiting for the lock, and see how long that goroutine spent waiting. The current mutex profiling value rate is used to randomly decide whether to record this event. If it's randomly chosen, the blocking time is recorded to a mutex_profile hash map keyed by the call stack where the goroutine released the lock.

In pseudocode:

func semacquire(lock):
  if lock.take():
    return

  start = now()
  waiters[lock].add(this_goroutine(), start)
  wait_for_wake_up()

func semrelease(lock):
  next_goroutine, start = waiters[lock].get()
  if !next_goroutine:
    // If there weren't any waiting goroutines, there is no contention to record
    return

  duration = now() - start
  if rand(0,1) < 1 / rate:
    s = stacktrace()
    mutex_profile[s].contentions += 1
    mutex_profile[s].delay += duration

  wake_up(next_goroutine)

Mutex Profiler Limitations

The mutex profiler has limitations similar to the block profiler:

  • ⚠️ The maximum number of nested function calls that can be captured in stack traces by the mutex profiler is currently 32, see CPU Profiler Limitations for more information on what happens when you exceed this limit.
  • ⚠️ There is no size limit for the internal hash map that holds the mutex profile. This means it will grow in size until it covers all blocking code paths in your code base. This is not a problem in practice, but might look like a small memory leak if you're observing the memory usage of your process.
  • CPU Profiler Labels or similar are not supported by mutex profiler. It's difficult to add this feature to the current implementation as it could create a memory leak in the internal hash map that holds the memory profiling data.
  • ⚠️ The contention counts and delay times in a mutex profile are adjusted at reporting time based on the most recent configured sampling rate, rather than at sample time. As a result, programs which change the mutex profile fraction in the middle of execution can see skewed counts and delays.

Goroutine Profiler

This profiler is currently documented in a separate document, see goroutine.md. It will be integrated into this document soon.

ThreadCreate Profiler

🐞 The threadcreate profile is intended to show stack traces that led to the creation of new OS threads. However, it's been broken since 2013, so you should stay away from it.

Advanced Topics

Stack Traces

This is currently documented in a separate document, see stack-traces.md. It will be integrated into this document soon.

pprof Format

This is currently documented in a separate document, see pprof.md. It will be integrated into this document soon.

Disclaimers

I'm felixge and work at Datadog on Continuous Profiling for Go. You should check it out. We're also hiring : ).

The information on this page is believed to be correct, but no warranty is provided. Feedback is welcome!

Credits: