Compiled V2Ray Binaries for OpenWRT(ipk file)
为OpenWRT编译的V2Ray二进制文件（ipk格式）
Source Merged from an "Outdated" Lede firmware
源代码从一份“过时”的Lede固件处合并
coolsnowwolf/lede#331
#-----------------Versions------------------
For soft routers please visit x86-64 branch.
软路由请移步X86-64分支。
MT7621 or other mipsel-24kc platforms please visit mipsel-24kc branch.
MT7621或者其他mipsel-24kc平台请移步mipsel-24kc分支。
#--------------Installations----------------
1.Install V2ray,V2ray Pro and the Depencies
1.安装V2ray,V2ray Pro和依赖
Note the package dnsmasq-full would make a conflict with the current dnsmasq,so run the following commands:
注意依赖包dnsmasq-full会与现存项目dnsmasq冲突，所以请运行以下命令：
opkg remove dnsmasq
opkg install dnsmasq-full
2.Because OpenWRT's ip command isn't in its correct place so a link is required:
2.因为OpenWRT的ip命令不在其正确的位置上，所以我们需要一个链接：
which ip
ln -s YourIPPathFromWhich(which中显示的地址) /usr/bin/ip
3.Generate V2Ray profile manually by using:
3.通过以下命令手动生成V2ray配置文件：
cd /etc/v2ray
lua gen_config.lua
cp TheGeneratedProfile(上一步生成的配置文件) ./
4.Enable the LuCi V2ray-Pro server
4.启动图形化V2Ray-Pro服务器
service v2raypro start
5.Further settings in LuCi interface
在LuCi界面中完善设置