Skip to content

nerves-project-attic/nerves_firmware_ssh

Repository files navigation

Nerves.Firmware.SSH [DEPRECATED]

IMPORTANT: This package is no longer maintained and should not be used in new projects.

This has bee replaced by ssh_subsystem_fwup in use with nerves_ssh

If you need to implement your own update mechanism, see nerves_ssh for creating a subsystem to help do so

Why did we change this? SSH on Nerves devices needed a complete overhaul for connection reliability. Utilizing subsystems allowed us to separate concerns of SSH behavior and provide an easier way for others to contribute extra pieces they might need

CircleCI Hex version

This project contains the necessary infrastruction to support "over-the-air" firmware updates with Nerves by using ssh.

The default settings make it quick to integrate into Nerves projects for development work. Later on, if your deployed devices can be reached by ssh, it's even possible to use tools like Ansible or even shell scripts to update a set of devices all at once.

Installation

NOTE: If you created your project with mix nerves.new then nerves_firmware_ssh is already installed and configured

First, add nerves_firmware_ssh to your list of dependencies in mix.exs:

def deps do
  [{:nerves_firmware_ssh, "~> 0.4"}]
end

Next, update your config/config.exs with one or more authorized keys. These come from files like your ~/.ssh/id_rsa.pub or ~/.ssh/id_ecdsa.pub that were created when you created your ssh keys. If you haven't done this, the following article may be helpful. Here's an example:

config :nerves_firmware_ssh,
  authorized_keys: [
    "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgQDBCdMwNo0xOE86il0DB2Tq4RCv07XvnV7W1uQBlOOE0ZZVjxmTIOiu8XcSLy0mHj11qX5pQH3Th6Jmyqdj",
    "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAACAQCaf37TM8GfNKcoDjoewa6021zln4GvmOiXqW6SRpF61uNWZXurPte1u8frrJX1P/hGxCL7YN3cV6eZqRiF"
  ]

Here's another way that may work well for you that avoids needing to commit your keys:

config :nerves_firmware_ssh,
  authorized_keys: [
    File.read!(Path.join(System.user_home!, ".ssh/id_rsa.pub"))
  ]

The first firmware bundle that you create after adding nerves_firmware_ssh will need to be installed in a non-ssh way. The usual route is to burn a MicroSD card for most targets, but you may have another way of getting the new image onto the device.

Pushing firmware updates to devices

This project provides a mix task for updating devices. Here's an example:

mix upload [destination IP or hostname]

This task uses the current mix target and environment settings to find the firmware bundle (.fw file) to upload. It does not build it, so you will need to run mix firmware first.

The upload task has some limitations especially if ssh requires credentials. If this task doesn't work for you, see the next section for creating a shell script with the equivalent commands.

Pushing firmware updates to devices via commandline ssh

Regular commandline ssh can push firmware to devices and is desirable if you want to integrate firmware updates into other scripts or programs like Ansible. To get started, run mix to generate a starter shell script with the ssh invocation:

mix firmware.gen.script

And then run:

./upload.sh [destination IP] [.fw file]

The destination IP and .fw file can frequently be guessed so the script attempts to do that for you.

See the nerves_firmware_ssh protocol section below and the ssh(1) man page for more details.

Troubleshooting

If you're not able to connect, try the following:

  1. Make sure that there's network connectivity and that you can ping the device.
  2. Check that the authorized keys are set correctly. On the target, run Application.get_all_env(:nerves_firmware_ssh) and compare keys.
  3. Are you trying to use OpenSSH's ssh-agent? See ERL-469 and try not using it.
  4. Add :runtime_tools to the :extra_applications key in your mix.exs and run :ssh_dbg.messages() on the target and try to connect. You should get some diagnostic data from the Erlang :ssh application that may help.
  5. File an issue or try the #nerves channel on the Elixir Slack.

Oops, I have the wrong keys on the device

Do not panic! You can temporarily change them if you have access to the console. Here's what to do:

Application.stop(:nerves_firmware_ssh)
Application.stop(:ssh)

Application.put_env(:nerves_firmware_ssh, :authorized_keys, ["ssh-rsa AAAAB3NzaC1yc2EAA..."])

Application.start(:ssh)
Application.start(:nerves_firmware_ssh)

You should be able to update the devices firmware now.

Device keys

Devices also have keys. This prevents man-in-the-middle attacks. For development, nerves_firmware_ssh uses hardcoded device keys that are contained in its priv directory. The private key portion is also in the clear in source control, so you should not rely on device authentication in this default configuration. This is for convenience since man-in-the-middle attacks and device authentication are usually not concerns for everyday development tasks.

If your device uses ssh for other services (e.g., for providing a remote command prompt), you'll likely want to use the same keys for both services. If the /etc/ssh directory exists in the device's root filesystem, nerves_system_ssh will automatically use keys from there. To generate them, add a rootfs-additions directory to your project (see the Nerves documentation and run something like the following:

mkdir -p rootfs-additions/etc/ssh
ssh-keygen -t rsa -f rootfs-additions/etc/ssh/ssh_host_rsa_key

This setup also hardcodes the ssh server keys for all devices and keeps them in the clear, so it doesn't improve security, but makes working with devices more convenient since there's one set of keys.

Another method is to either symlink /etc/ssh on the device to a writable location on the device (Nerves devices have read-only root filesystems) or to specify an alternative location for device keys in your config.exs:

config :nerves_firmware_ssh,
  authorized_keys: [
  ],
  system_dir: "/mnt/device/ssh"

This requires that you add a manufacturing step to your device production that creates a public/private key pair, writes it to your device in a hypothetical /mnt/device partition, and saves the public key portion. How to do this isn't covered here.

The nerves_firmware_ssh protocol

nerves_firmware_ssh makes use of the ssh subsystem feature for operation. This is similar to sftp. The subsystem is named nerves_firmware_ssh. See the -s option on ssh(1).

The data sent over ssh contains a header and then the contents of one or more .fw files. The header is terminated by a newline (\n) and is a comma separated list of operations. Currently supported operations are:

Operation Description
fwup($FILESIZE) Stream $FILESIZE bytes to fwup on the device
reboot Reboot the device

After the header, all data required by operations in the header is concatenated and streamed over. Here's an example header:

fwup(10000),reboot\n

For this case, 10,000 bytes of data should be sent after the header. That data will be streamed into fwup. After fwup completes, the device will be rebooted. If any error occurs with the fwup step, processing stops and the device will not be rebooted.

The data coming back from the server is the output of the invoked commands. This is primarily textual output suitable for reading by humans. If automating updates, this output should be logged to help debug update failures if any.

Example manual invocation

Use mix firmware.gen.script to generate a script that's portable and has a few workarounds for platforms. The general idea, though, is to do something like this:

FILENAME=myapp.fw
FILESIZE=$(stat -c%s "$FILENAME")
printf "fwup:$FILESIZE,reboot\n" | cat - $FILENAME | ssh -s -p 8989 target_ip_addr nerves_firmware_ssh

License

All source code is licensed under the Apache License, 2.0.