ultimaker_cpe_plus_black.xml.fdm_material

<?xml version="1.0" encoding="UTF-8"?>
<!--
Generic CPE+ profile. Serves as an example file, data in this file is not correct.
-->
<fdmmaterial xmlns="http://www.ultimaker.com/material">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>CPE+</material>
            <color>Black</color>
        </name>
        <GUID>1aca047a-42df-497c-abfb-0e9cb85ead52</GUID>
        <version>1</version>
        <color_code>#0e0e10</color_code>
    </metadata>
    <properties>
        <density>1.18</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
        <setting key="print temperature">260</setting>
        <setting key="heated bed temperature">107</setting>
        <setting key="standby temperature">175</setting>

        <machine>
            <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2+"/>
            <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2 Extended+"/>
            <setting key="hardware compatible">yes</setting>

            <hotend id="0.25 mm">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="0.4 mm" />
            <hotend id="0.6 mm" />
            <hotend id="0.8 mm" />
        </machine>
        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
            <hotend id="BB 0.4" />
            <hotend id="BB 0.8" />
            <hotend id="AA 0.25">
                <setting key="hardware compatible">yes</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">7</setting>
                <setting key="print cooling">1</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>