| source: | fortios_firewall_ippool.py |
|---|---|
| orphan: |
.. versionadded:: 2.0.0
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and ippool category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
The below requirements are needed on the host that executes this module.
- ansible>=2.9
Using member operation to add an element to an existing object.
v6.0.0 |
v6.0.5 |
v6.0.11 |
v6.2.0 |
v6.2.3 |
v6.2.5 |
v6.2.7 |
v6.4.0 |
v6.4.1 |
v6.4.4 |
v7.0.0 |
v7.0.1 |
v7.0.2 |
v7.0.3 |
v7.0.4 |
v7.0.5 |
v7.0.6 |
v7.0.7 |
v7.0.8 |
v7.0.12 |
v7.2.0 |
v7.2.1 |
v7.2.2 |
v7.2.4 |
v7.4.0 |
|
| fortios_firewall_ippool | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes |
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- state - Indicates whether to create or remove the object. type: str required: true choices: present, absent
- firewall_ippool - Configure IPv4 IP pools. type: dict
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0firewall_ippool yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - add_nat64_route - Enable/disable adding NAT64 route. type: str choices: disable, enable
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0add_nat64_route no no no no no no no no no no no yes yes yes yes yes yes yes yes yes yes yes yes yes yes [disable] n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a yes yes yes yes yes yes yes yes yes yes yes yes yes yes [enable] n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a yes yes yes yes yes yes yes yes yes yes yes yes yes yes - arp_intf - Select an interface from available options that will reply to ARP requests. (If blank, any is selected). Source system.interface.name. type: str
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0arp_intf yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - arp_reply - Enable/disable replying to ARP requests when an IP Pool is added to a policy . type: str choices: disable, enable
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0arp_reply yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes [disable] yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes [enable] yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - associated_interface - Associated interface name. Source system.interface.name. type: str
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0associated_interface yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - block_size - Number of addresses in a block (64 - 4096). type: int
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0block_size yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - comments - Comment. type: str
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0comments yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - endip - Final IPv4 address (inclusive) in the range for the address pool (format xxx.xxx.xxx.xxx). type: str
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0endip yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - endport - Final port number (inclusive) in the range for the address pool . type: int
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0endport no no no no no no no no no no yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - name - IP pool name. type: str required: true
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0name yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - nat64 - Enable/disable NAT64. type: str choices: disable, enable
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0nat64 no no no no no no no no no no no yes yes yes yes yes yes yes yes yes yes yes yes yes yes [disable] n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a yes yes yes yes yes yes yes yes yes yes yes yes yes yes [enable] n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a yes yes yes yes yes yes yes yes yes yes yes yes yes yes - num_blocks_per_user - Number of addresses blocks that can be used by a user (1 to 128). type: int
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0num_blocks_per_user yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - pba_timeout - Port block allocation timeout (seconds). type: int
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0pba_timeout yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - permit_any_host - Enable/disable full cone NAT. type: str choices: disable, enable
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0permit_any_host yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes [disable] yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes [enable] yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - port_per_user - Number of port for each user (32 - 60416). type: int
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0port_per_user no no no no no no no no no no yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - source_endip - Final IPv4 address (inclusive) in the range of the source addresses to be translated (format xxx.xxx.xxx.xxx). type: str
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0source_endip yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - source_startip - First IPv4 address (inclusive) in the range of the source addresses to be translated (format = xxx.xxx.xxx.xxx). type: str
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0source_startip yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - startip - First IPv4 address (inclusive) in the range for the address pool (format xxx.xxx.xxx.xxx). type: str
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0startip yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - startport - First port number (inclusive) in the range for the address pool . type: int
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0startport no no no no no no no no no no yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes - subnet_broadcast_in_ippool - Enable/disable inclusion of the subnetwork address and broadcast IP address in the NAT64 IP pool. type: str choices: disable, enable
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0subnet_broadcast_in_ippool no no no no no no no no no no no no no no no no no no yes yes no no no yes yes [disable] n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a yes yes n/a n/a n/a yes yes [enable] n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a yes yes n/a n/a n/a yes yes - type - IP pool type (overload, one-to-one, fixed port range, or port block allocation). type: str choices: overload, one-to-one, fixed-port-range, port-block-allocation
more...
v6.0.0v6.0.5v6.0.11v6.2.0v6.2.3v6.2.5v6.2.7v6.4.0v6.4.1v6.4.4v7.0.0v7.0.1v7.0.2v7.0.3v7.0.4v7.0.5v7.0.6v7.0.7v7.0.8v7.0.12v7.2.0v7.2.1v7.2.2v7.2.4v7.4.0type yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes [overload] yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes [one-to-one] yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes [fixed-port-range] yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes [port-block-allocation] yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes
Note
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- hosts: fortigates
collections:
- fortinet.fortios
connection: httpapi
vars:
vdom: "root"
ansible_httpapi_use_ssl: yes
ansible_httpapi_validate_certs: no
ansible_httpapi_port: 443
tasks:
- name: Configure IPv4 IP pools.
fortios_firewall_ippool:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
firewall_ippool:
add_nat64_route: "disable"
arp_intf: "<your_own_value> (source system.interface.name)"
arp_reply: "disable"
associated_interface: "<your_own_value> (source system.interface.name)"
block_size: "128"
comments: "<your_own_value>"
endip: "<your_own_value>"
endport: "65533"
name: "default_name_11"
nat64: "disable"
num_blocks_per_user: "8"
pba_timeout: "30"
permit_any_host: "disable"
port_per_user: "0"
source_endip: "<your_own_value>"
source_startip: "<your_own_value>"
startip: "<your_own_value>"
startport: "5117"
subnet_broadcast_in_ippool: "disable"
type: "overload"
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
- This module is not guaranteed to have a backwards compatible interface.
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
Hint
If you notice any issues in this documentation, you can create a pull request to improve it.