source: | fortios_system_dhcp6_server.py |
---|---|
orphan: |
.. versionadded:: 2.0.0
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system_dhcp6 feature and server category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
The below requirements are needed on the host that executes this module.
- ansible>=2.14
Using member operation to add an element to an existing object.
Supported Version Ranges | |
fortios_system_dhcp6_server | v6.0.0 -> latest |
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- state - Indicates whether to create or remove the object. type: str required: true choices: present, absent
- system_dhcp6_server - Configure DHCPv6 servers. type: dict
more...
Supported Version Ranges system_dhcp6_server v6.0.0 -> latest
- delegated_prefix_iaid - IAID of obtained delegated-prefix from the upstream interface. type: int
more...
Supported Version Ranges delegated_prefix_iaid v7.0.2 -> latest
- dns_search_list - DNS search list options. type: str choices: delegated, specify
more...
Supported Version Ranges dns_search_list v6.0.0 -> latest
[delegated] v6.0.0 -> latest
[specify] v6.0.0 -> latest
- dns_server1 - DNS server 1. type: str
more...
Supported Version Ranges dns_server1 v6.0.0 -> latest
- dns_server2 - DNS server 2. type: str
more...
Supported Version Ranges dns_server2 v6.0.0 -> latest
- dns_server3 - DNS server 3. type: str
more...
Supported Version Ranges dns_server3 v6.0.0 -> latest
- dns_server4 - DNS server 4. type: str
more...
Supported Version Ranges dns_server4 v6.2.0 -> latest
- dns_service - Options for assigning DNS servers to DHCPv6 clients. type: str choices: delegated, default, specify
more...
Supported Version Ranges dns_service v6.0.0 -> latest
[delegated] v6.0.0 -> latest
[default] v6.0.0 -> latest
[specify] v6.0.0 -> latest
- domain - Domain name suffix for the IP addresses that the DHCP server assigns to clients. type: str
more...
Supported Version Ranges domain v6.0.0 -> latest
- id - ID. see Notes. type: int required: true
more...
Supported Version Ranges id v6.0.0 -> latest
- interface - DHCP server can assign IP configurations to clients connected to this interface. Source system.interface.name. type: str
more...
Supported Version Ranges interface v6.0.0 -> latest
- ip_mode - Method used to assign client IP. type: str choices: range, delegated
more...
Supported Version Ranges ip_mode v6.0.0 -> latest
[range] v6.0.0 -> latest
[delegated] v6.0.0 -> latest
- ip_range - DHCP IP range configuration. type: list member_path: ip_range:id
more...
Supported Version Ranges ip_range v6.0.0 -> latest
- end_ip - End of IP range. type: str
more...
Supported Version Ranges end_ip v6.0.0 -> latest
- id - ID. see Notes. type: int required: true
more...
Supported Version Ranges id v6.0.0 -> latest
- start_ip - Start of IP range. type: str
more...
Supported Version Ranges start_ip v6.0.0 -> latest
- lease_time - Lease time in seconds, 0 means unlimited. type: int
more...
Supported Version Ranges lease_time v6.0.0 -> latest
- option1 - Option 1. type: str
more...
Supported Version Ranges option1 v6.0.0 -> latest
- option2 - Option 2. type: str
more...
Supported Version Ranges option2 v6.0.0 -> latest
- option3 - Option 3. type: str
more...
Supported Version Ranges option3 v6.0.0 -> latest
- prefix_mode - Assigning a prefix from a DHCPv6 client or RA. type: str choices: dhcp6, ra
more...
Supported Version Ranges prefix_mode v7.0.0 -> latest
[dhcp6] v6.0.0 -> latest
[ra] v6.0.0 -> latest
- prefix_range - DHCP prefix configuration. type: list member_path: prefix_range:id
more...
Supported Version Ranges prefix_range v6.0.0 -> latest
- end_prefix - End of prefix range. type: str
more...
Supported Version Ranges end_prefix v6.0.0 -> latest
- id - ID. see Notes. type: int required: true
more...
Supported Version Ranges id v6.0.0 -> latest
- prefix_length - Prefix length. type: int
more...
Supported Version Ranges prefix_length v6.0.0 -> latest
- start_prefix - Start of prefix range. type: str
more...
Supported Version Ranges start_prefix v6.0.0 -> latest
- rapid_commit - Enable/disable allow/disallow rapid commit. type: str choices: disable, enable
more...
Supported Version Ranges rapid_commit v6.0.0 -> latest
[disable] v6.0.0 -> latest
[enable] v6.0.0 -> latest
- status - Enable/disable this DHCPv6 configuration. type: str choices: disable, enable
more...
Supported Version Ranges status v6.0.0 -> latest
[disable] v6.0.0 -> latest
[enable] v6.0.0 -> latest
- subnet - Subnet or subnet-id if the IP mode is delegated. type: str
more...
Supported Version Ranges subnet v6.0.0 -> latest
- upstream_interface - Interface name from where delegated information is provided. Source system.interface.name. type: str
more...
Supported Version Ranges upstream_interface v6.0.0 -> latest
Note
- We highly recommend using your own value as the id instead of 0, while '0' is a special placeholder that allows the backend to assign the latest available number for the object, it does have limitations. Please find more details in Q&A.
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- name: Configure DHCPv6 servers.
fortinet.fortios.fortios_system_dhcp6_server:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
system_dhcp6_server:
delegated_prefix_iaid: "0"
dns_search_list: "delegated"
dns_server1: "<your_own_value>"
dns_server2: "<your_own_value>"
dns_server3: "<your_own_value>"
dns_server4: "<your_own_value>"
dns_service: "delegated"
domain: "<your_own_value>"
id: "11"
interface: "<your_own_value> (source system.interface.name)"
ip_mode: "range"
ip_range:
-
end_ip: "<your_own_value>"
id: "16"
start_ip: "<your_own_value>"
lease_time: "604800"
option1: "<your_own_value>"
option2: "<your_own_value>"
option3: "<your_own_value>"
prefix_mode: "dhcp6"
prefix_range:
-
end_prefix: "<your_own_value>"
id: "25"
prefix_length: "0"
start_prefix: "<your_own_value>"
rapid_commit: "disable"
status: "disable"
subnet: "<your_own_value>"
upstream_interface: "<your_own_value> (source system.interface.name)"
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
- This module is not guaranteed to have a backwards compatible interface.
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
Hint
If you notice any issues in this documentation, you can create a pull request to improve it.