source: | fortios_system_modem.py |
---|---|
orphan: |
.. versionadded:: 2.0.0
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and modem category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
The below requirements are needed on the host that executes this module.
- ansible>=2.14
Using member operation to add an element to an existing object.
Supported Version Ranges | |
fortios_system_modem | v6.0.0 -> latest |
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- system_modem - Configure MODEM. type: dict
more...
Supported Version Ranges system_modem v6.0.0 -> latest
- action - Dial up/stop MODEM. type: str choices: dial, stop, none
more...
Supported Version Ranges action v6.0.0 -> latest
[dial] v6.0.0 -> latest
[stop] v6.0.0 -> latest
[none] v6.0.0 -> latest
- altmode - Enable/disable altmode for installations using PPP in China. type: str choices: enable, disable
more...
Supported Version Ranges altmode v6.0.0 -> latest
[enable] v6.0.0 -> latest
[disable] v6.0.0 -> latest
- authtype1 - Allowed authentication types for ISP 1. type: list choices: pap, chap, mschap, mschapv2
more...
Supported Version Ranges authtype1 v6.0.0 -> latest
[pap] v6.0.0 -> latest
[chap] v6.0.0 -> latest
[mschap] v6.0.0 -> latest
[mschapv2] v6.0.0 -> latest
- authtype2 - Allowed authentication types for ISP 2. type: list choices: pap, chap, mschap, mschapv2
more...
Supported Version Ranges authtype2 v6.0.0 -> latest
[pap] v6.0.0 -> latest
[chap] v6.0.0 -> latest
[mschap] v6.0.0 -> latest
[mschapv2] v6.0.0 -> latest
- authtype3 - Allowed authentication types for ISP 3. type: list choices: pap, chap, mschap, mschapv2
more...
Supported Version Ranges authtype3 v6.0.0 -> latest
[pap] v6.0.0 -> latest
[chap] v6.0.0 -> latest
[mschap] v6.0.0 -> latest
[mschapv2] v6.0.0 -> latest
- auto_dial - Enable/disable auto-dial after a reboot or disconnection. type: str choices: enable, disable
more...
Supported Version Ranges auto_dial v6.0.0 -> latest
[enable] v6.0.0 -> latest
[disable] v6.0.0 -> latest
- connect_timeout - Connection completion timeout (30 - 255 sec). type: int
more...
Supported Version Ranges connect_timeout v6.0.0 -> latest
- dial_cmd1 - Dial command (this is often an ATD or ATDT command). type: str
more...
Supported Version Ranges dial_cmd1 v6.0.0 -> latest
- dial_cmd2 - Dial command (this is often an ATD or ATDT command). type: str
more...
Supported Version Ranges dial_cmd2 v6.0.0 -> latest
- dial_cmd3 - Dial command (this is often an ATD or ATDT command). type: str
more...
Supported Version Ranges dial_cmd3 v6.0.0 -> latest
- dial_on_demand - Enable/disable to dial the modem when packets are routed to the modem interface. type: str choices: enable, disable
more...
Supported Version Ranges dial_on_demand v6.0.0 -> latest
[enable] v6.0.0 -> latest
[disable] v6.0.0 -> latest
- distance - Distance of learned routes (1 - 255). type: int
more...
Supported Version Ranges distance v6.0.0 -> latest
- dont_send_CR1 - Do not send CR when connected (ISP1). type: str choices: enable, disable
more...
Supported Version Ranges dont_send_CR1 v6.0.0 -> latest
[enable] v6.0.0 -> latest
[disable] v6.0.0 -> latest
- dont_send_CR2 - Do not send CR when connected (ISP2). type: str choices: enable, disable
more...
Supported Version Ranges dont_send_CR2 v6.0.0 -> latest
[enable] v6.0.0 -> latest
[disable] v6.0.0 -> latest
- dont_send_CR3 - Do not send CR when connected (ISP3). type: str choices: enable, disable
more...
Supported Version Ranges dont_send_CR3 v6.0.0 -> latest
[enable] v6.0.0 -> latest
[disable] v6.0.0 -> latest
- extra_init1 - Extra initialization string to ISP 1. type: str
more...
Supported Version Ranges extra_init1 v6.0.0 -> latest
- extra_init2 - Extra initialization string to ISP 2. type: str
more...
Supported Version Ranges extra_init2 v6.0.0 -> latest
- extra_init3 - Extra initialization string to ISP 3. type: str
more...
Supported Version Ranges extra_init3 v6.0.0 -> latest
- holddown_timer - Hold down timer in seconds (1 - 60 sec). type: int
more...
Supported Version Ranges holddown_timer v6.0.0 -> latest
- idle_timer - MODEM connection idle time (1 - 9999 min). type: int
more...
Supported Version Ranges idle_timer v6.0.0 -> latest
- interface - Name of redundant interface. Source system.interface.name. type: str
more...
Supported Version Ranges interface v6.0.0 -> latest
- lockdown_lac - Allow connection only to the specified Location Area Code (LAC). type: str
more...
Supported Version Ranges lockdown_lac v6.0.0 -> latest
- mode - Set MODEM operation mode to redundant or standalone. type: str choices: standalone, redundant
more...
Supported Version Ranges mode v6.0.0 -> latest
[standalone] v6.0.0 -> latest
[redundant] v6.0.0 -> latest
- network_init - AT command to set the Network name/type (AT+COPS=,[,[,]]). type: str
more...
Supported Version Ranges network_init v6.0.0 -> latest
- passwd1 - Password to access the specified dialup account. type: str
more...
Supported Version Ranges passwd1 v6.0.0 -> latest
- passwd2 - Password to access the specified dialup account. type: str
more...
Supported Version Ranges passwd2 v6.0.0 -> latest
- passwd3 - Password to access the specified dialup account. type: str
more...
Supported Version Ranges passwd3 v6.0.0 -> latest
- peer_modem1 - Specify peer MODEM type for phone1. type: str choices: generic, actiontec, ascend_TNT
more...
Supported Version Ranges peer_modem1 v6.0.0 -> latest
[generic] v6.0.0 -> latest
[actiontec] v6.0.0 -> latest
[ascend_TNT] v6.0.0 -> latest
- peer_modem2 - Specify peer MODEM type for phone2. type: str choices: generic, actiontec, ascend_TNT
more...
Supported Version Ranges peer_modem2 v6.0.0 -> latest
[generic] v6.0.0 -> latest
[actiontec] v6.0.0 -> latest
[ascend_TNT] v6.0.0 -> latest
- peer_modem3 - Specify peer MODEM type for phone3. type: str choices: generic, actiontec, ascend_TNT
more...
Supported Version Ranges peer_modem3 v6.0.0 -> latest
[generic] v6.0.0 -> latest
[actiontec] v6.0.0 -> latest
[ascend_TNT] v6.0.0 -> latest
- phone1 - Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters). type: str
more...
Supported Version Ranges phone1 v6.0.0 -> latest
- phone2 - Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters). type: str
more...
Supported Version Ranges phone2 v6.0.0 -> latest
- phone3 - Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters). type: str
more...
Supported Version Ranges phone3 v6.0.0 -> latest
- pin_init - AT command to set the PIN (AT+PIN=). type: str
more...
Supported Version Ranges pin_init v6.0.0 -> latest
- ppp_echo_request1 - Enable/disable PPP echo-request to ISP 1. type: str choices: enable, disable
more...
Supported Version Ranges ppp_echo_request1 v6.0.0 -> latest
[enable] v6.0.0 -> latest
[disable] v6.0.0 -> latest
- ppp_echo_request2 - Enable/disable PPP echo-request to ISP 2. type: str choices: enable, disable
more...
Supported Version Ranges ppp_echo_request2 v6.0.0 -> latest
[enable] v6.0.0 -> latest
[disable] v6.0.0 -> latest
- ppp_echo_request3 - Enable/disable PPP echo-request to ISP 3. type: str choices: enable, disable
more...
Supported Version Ranges ppp_echo_request3 v6.0.0 -> latest
[enable] v6.0.0 -> latest
[disable] v6.0.0 -> latest
- priority - Priority of learned routes (1 - 65535). type: int
more...
Supported Version Ranges priority v6.0.0 -> latest
- redial - Redial limit (1 - 10 attempts, none = redial forever). type: str choices: none, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
more...
Supported Version Ranges redial v6.0.0 -> latest
[none] v6.0.0 -> latest
[1] v6.0.0 -> latest
[2] v6.0.0 -> latest
[3] v6.0.0 -> latest
[4] v6.0.0 -> latest
[5] v6.0.0 -> latest
[6] v6.0.0 -> latest
[7] v6.0.0 -> latest
[8] v6.0.0 -> latest
[9] v6.0.0 -> latest
[10] v6.0.0 -> latest
- reset - Number of dial attempts before resetting modem (0 = never reset). type: int
more...
Supported Version Ranges reset v6.0.0 -> latest
- status - Enable/disable Modem support (equivalent to bringing an interface up or down). type: str choices: enable, disable
more...
Supported Version Ranges status v6.0.0 -> latest
[enable] v6.0.0 -> latest
[disable] v6.0.0 -> latest
- traffic_check - Enable/disable traffic-check. type: str choices: enable, disable
more...
Supported Version Ranges traffic_check v6.0.0 -> latest
[enable] v6.0.0 -> latest
[disable] v6.0.0 -> latest
- username1 - User name to access the specified dialup account. type: str
more...
Supported Version Ranges username1 v6.0.0 -> latest
- username2 - User name to access the specified dialup account. type: str
more...
Supported Version Ranges username2 v6.0.0 -> latest
- username3 - User name to access the specified dialup account. type: str
more...
Supported Version Ranges username3 v6.0.0 -> latest
- wireless_port - Enter wireless port number: 0 for default, 1 for first port, and so on (0 - 4294967295). type: int
more...
Supported Version Ranges wireless_port v6.0.0 -> latest
Note
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- name: Configure MODEM.
fortinet.fortios.fortios_system_modem:
vdom: "{{ vdom }}"
system_modem:
action: "dial"
altmode: "enable"
authtype1: "pap"
authtype2: "pap"
authtype3: "pap"
auto_dial: "enable"
connect_timeout: "90"
dial_cmd1: "<your_own_value>"
dial_cmd2: "<your_own_value>"
dial_cmd3: "<your_own_value>"
dial_on_demand: "enable"
distance: "1"
dont_send_CR1: "enable"
dont_send_CR2: "enable"
dont_send_CR3: "enable"
extra_init1: "<your_own_value>"
extra_init2: "<your_own_value>"
extra_init3: "<your_own_value>"
holddown_timer: "60"
idle_timer: "5"
interface: "<your_own_value> (source system.interface.name)"
lockdown_lac: "<your_own_value>"
mode: "standalone"
network_init: "<your_own_value>"
passwd1: "<your_own_value>"
passwd2: "<your_own_value>"
passwd3: "<your_own_value>"
peer_modem1: "generic"
peer_modem2: "generic"
peer_modem3: "generic"
phone1: "<your_own_value>"
phone2: "<your_own_value>"
phone3: "<your_own_value>"
pin_init: "<your_own_value>"
ppp_echo_request1: "enable"
ppp_echo_request2: "enable"
ppp_echo_request3: "enable"
priority: "1"
redial: "none"
reset: "0"
status: "enable"
traffic_check: "enable"
username1: "<your_own_value>"
username2: "<your_own_value>"
username3: "<your_own_value>"
wireless_port: "0"
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
- This module is not guaranteed to have a backwards compatible interface.
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
Hint
If you notice any issues in this documentation, you can create a pull request to improve it.