Skip to content

Latest commit

 

History

History
207 lines (180 loc) · 10.6 KB

blog.md

File metadata and controls

207 lines (180 loc) · 10.6 KB

Travis CI Helpers for Perl

I deal with a lot of modules that promise backwards compatibility with older versions of perl, usually back to perl 5.8.1. Since I don't regularly use perl versions that old when developing, accidentally introducing incompatibilities is always a risk. Having a continuous integration system check this for me makes it much easier to catch mistakes like this before they get released into the wild.

Travis CI is a very useful continuous integration service that is free for any public repositories on GitHub. There are issues with using Travis CI for the kind of testing I need though. First, it only provides the last revision of each perl series. Especially in the perl 5.8 and 5.10 series, there are substantial enough differences between them that testing only the latest isn't adequate. Additionally, some of the testing needs to be done on perls built with threading, which isn't included on most of the versions available on Travis. It also is sometimes useful to test without any additional modules pre-installed like Travis does.

There is a solution for this though. Perl can be built directly on the Travis test boxes before running the tests. Any arbitrary perl version can be built, including blead (perl from git) or new stable releases that haven't been included on Travis yet (like was the case with 5.20 for a few months).

Building new perl versions was what originally inspired me to begin work on my Travis helper scripts. Since then, they have expanded to include a number of other functions to simplify testing perl modules on Travis.

The Simple Version

The helpers can be used individually to customize the building and testing process, but for most distributions the automatic mode will work. A simple .travis.yml using my helper scripts would look like this:

language: perl
perl:
  - "5.8"                     # normal pre-installed perl
  - "5.8.4"                   # installs perl 5.8.4
  - "5.8.4-thr"               # installs perl 5.8.4 with threading
  - "5.20"                    # installs latest perl 5.20 (if not already available)
  - "blead"                   # install perl from git
before_install:
  - git clone git://github.com/travis-perl/helpers ~/travis-perl-helpers
  - source ~/travis-perl-helpers/init --auto

This includes most of the features and will work for most distributions. It includes building perl where needed, installing prerequisites, and will work with dists built using Dist::Zilla, ExtUtils::MakeMaker, Module::Build, or Module::Install.

The --auto flag means that the testing process is roughly equivalent to the following Travis config.

language: perl
perl:
  - "5.8"                     # normal pre-installed perl
  - "5.8.4"                   # installs perl 5.8.4
  - "5.8.4-thr"               # installs perl 5.8.4 with threading
  - "5.20"                    # installs latest perl 5.20 (if not already available)
  - "blead"                   # install perl from git
before_install:
  - git clone git://github.com/travis-perl/helpers ~/travis-perl-helpers
  - source ~/travis-perl-helpers/init
  - build-perl
  - perl -V
  - build-dist
  - cd $BUILD_DIR             # $BUILD_DIR is set by the build-dist command
install:
  - cpan-install --deps       # installs prereqs, including recommends
  - cpan-install --coverage   # installs coverage prereqs, if enabled
before_script:
  - coverage-setup
script:
  - perl Makefile.PL          # or Build.PL if it exists
  - make                      # or ./Build
  - prove -l -s -j$(test-jobs) $(test-files)
after_success:
  - coverage-report

While the automatic mode supports most of the features the helpers provide, it isn't meant to be used with custom build steps. If any customization of the build steps is needed, the automatic mode shouldn't be used.

Perl Building - build-perl

The first important helper function is build-perl. It takes the requested perl version from the build matrix and either downloads or builds it for you if it doesn't exist. So for example, if 5.16 is requested, Travis will already have it available and nothing will be done. But if 5.16.0 is requested, a fresh version of perl will be built. If 5.8.8 is requested, a pre-built copy of perl 5.8.8 will be downloaded, as it's a commonly tested version so I've pre-built it. Building perl generally takes around 4 minutes on Travis, so these pre-built copies can significantly speed up small test suites.

Build flags can also be added to the versions. 5.8.5-thr will build a version of perl including support for threads. 5.8.5-dbg will include debugging support. And 5.16-thr will build the latest 5.16 release and include support for threads.

If blead is requested, perl will be built from git. This is helpful to see if your module will be impacted by future changes to perl, but as blead is not guaranteed stable it should usually be included in Travis's allow_failures section.

Pre-installed Modules - local-lib

When the helper scripts build or download a perl version, they don't have any extra modules pre-installed. The default Travis builds all include a set of prerequisites pre-installed. Both cases can be useful for different situations. In some cases, you want to that your prerequisite installation works properly, or that your module works with an older version of a core module. But installing all of the prerequisites every time can delay testing by a significant amount.

To help with this, each pre-built copy of perl also has a set of pre-built local::lib directories that can be switched to. These can be used by adding them directly to the build matrix, attaching them to the perl version like 5.10.1@moose. The moose pre-built includes Moose and Moo. If not using a pre-built perl, the modules in the named local::lib will be installed.

The full list of pre-built local::libs and the libraries in them can be seen in the local-libs.txt file.

Distribution Building - build-dist

There are a variety of tools used for distribution building. Manually writing a Makefile.PL is one, but other options include Module::Build, Module::Install, or Dist::Zilla. While tests can often be performed directly against the files in the repository without building, this won't include any of the extra checks done by or generated by the dist building tool. It also can complicate the process of finding prerequisites.

The approach the helpers recommend is first generating a full dist like would be uploaded to CPAN, then testing against that. Because the distribution building tool often won't work on all of the perl versions you wish to test against, it's helpful to use a different (newer) version of perl than the tests are run with.

This is what the build-dist helper does. It uses the latest pre-built version of perl to generate a distribution directory, automatically installing any modules needed. It then sets the BUILD_DIR environment variable to the location of the built distribution.

Prerequisite Installation - cpan-install

For most cases, prerequisite installation could be handled by cpanm, but the cpan-install helper provides a few niceties. It provides more helpful output than cpanm in the event of a failure, but is still concise in the common case. It also tweaks the set of modules to be installed. The developer prerequisites and recommended modules of the distribution being tested will be installed, but not those of its prerequisites.

It also includes better compatibility with ancient versions of perl.

Coverage Reporting

Setting up coverage reporting in Travis is relatively simple. You just need to install the Devel::Cover module and run the cover command appropriately. But coverage reporting slows down testing substantially and can also prevent some tests from running (such as those using threads). So it's useful to limit coverage testing to only some of the perls you are testing with. With that in mind, the helper scripts include several coverage related commands that are no-ops unless the COVERAGE environment variable is set.

Running the Tests

For running the actual tests, the helpers do very little. It's recommended to use the standard prove command, with whatever options are wanted.

There are a few helpers that can be used with prove though. If you want to run tests in parallel, the test-jobs returns a recommended number of processes to use. The number is one more than the number CPUs available. It also will always return 1 if COVERAGE is enabled, since Devel::Cover is currently buggy when used with parallel testing.

The test-files returns all of the test scripts to run. This is generated by searching for .t files recursively in the t and xt directories. However, if the AUTHOR_TESTING environment variable is set to 0, it will only return files in t. It can also help with very slow test runs. If the TEST_PARTITION and TEST_PARTITIONS environment variables are set, it will return only a subset of the tests. This allows you to split the tests across multiple Travis builds in parallel, making the full test run take less time.

Bits and Pieces

An important feature of the helpers is that they can all be used independently of each other. So if perl building is the only feature needed, the rest of the helpers can be ignored.

Overall, having these helpers has allowed me to set up testing easier for a variety of different projects, and allowed me to expand the versions of perl tests. They have been used to add perl 5.8 and blead testing to Moose, and perl 5.6 testing to Moo and ExtUtils::MakeMaker.