riverpro.md

States for RIVERPRO

version: 0.0.29

bmsMaster

inv

pd

bmsMaster

number

State	Min	Max	Unit	Mult	Name
amp	0	50	A	0.001	Current
cycles	0	6000		1	Number of cycles
fullCap	0	80000	mAh	1	Full capacity
maxCellTemp	0	80	°C	1	Maximum cell temperature
maxCellVol	0	60	V	0.001	Maximum cell voltage
maxMosTemp	0	80	°C	1	Maximum MOS temperature
minCellTemp	0	80	°C	1	Minimum cell temperature
minCellVol	0	60	V	0.001	Minimum cell voltage
minMosTemp	0	80	°C	1	Minimum MOS temperature
remainCap	0	80000	mAh	1	Remaining capacity
soc	0	100	%	1	Remaining battery percentage
tagChgAmp	0	100	A	0.0001	Target charging current
temp	0	80	°C	1	Temperature
vol	0	60	V	0.001	Voltage
tagChgVol	0	100	V	0.001	Target charging voltage

string

State	Name
bmsFault	BMS permanent fault
openBmsIdx	Battery pack enable state
sysVer	System version
bqSysStatReq	BQ hardware protection register

diagnostic

State	Name	values
errCode	Global error code	{0:OK?}

level

State	Min	Max	Unit	Mult	Name	cmd
maxChargeSoc	50	100	%	1	Charge upper limit	{from:Android,operateType:TCP,id:38461351,lang:en-us,params:{id:49,maxChgSoc:95},version:1.0}

inv

switch

State	off	on	Name	cmd
cfgAcEnabled	off	on	AC discharge (INV) switch setting	{from:Android,operateType:TCP,id:554272649,lang:en-us,params:{id:66,enabled:1},version:1.0}
cfgAcXboost	off	on	X-Boost switch	{from:Android,operateType:TCP,id:602507362,lang:en-us,params:{id:66,xboost:1},version:1.0}

diagnostic

State	Name	values
cfgAcOutFreq	Inverter output frequency (Hz)	{1:50 Hz,2:60 Hz,255:ignored}
chargerType	Charger type	{0:no charging,1:AC charging,2:DC adapter charging,3:solar charging,4:CC,5:BC}
fanState	Fan state	{0:disabled,1:Level 1,2:Level 2,3:Level 3}
cfgAcChgModeFlg	AC charging mode flag	{0:?,1:?}
cfgFanMode	Fan mode	{0:disabled,1:Level 1,2:Level 2,3:Level 3}

string

State	Name
cfgAcOutVoltage	Inverter output voltage (V): 0xffffffff: ignored
errCode	Global error code
invType	PSDR model code
sysVer	System version

level

State	Min	Max	Unit	Mult	Name	cmd
cfgStandbyMin	0	720	min	1	AC standby time /min 0 Never standby 720 Default value	{from:Android,operateType:TCP,id:153750799,lang:en-us,params:{id:153,standByMins:360},version:1.0}

number

State	Min	Max	Unit	Mult	Name
dcInAmp	0	13	A	0.001	DC input current
dcInVol	0	60	V	0.001	DC input voltage
inputWatts	0	4000	W	1	Charging power
invOutAmp	0	13	A	0.001	Inverter output current
invOutFreq	0	62	Hz	1	Inverter output frequency
invOutVol	0	250	V	0.001	Actual inverter output voltage
outTemp	0	90	°C	1	Inverter temperature
outputWatts	0	4000	W	1	Discharging power
inTemp	0	80	°C	1	Inverter temperature
invInAmp	0	13	A	0.001	Inverter input current
invInFreq	0	62	Hz	1	Inverter input frequency
invInVol	0	250	V	0.001	Inverter input voltage

pd

switch

State	off	on	Name	cmd
beepState	normal	quiet	Beep status	{from:Android,operateType:TCP,id:834553333,lang:en-us,params:{id:38,enabled:1},version:1.0}
carSwitch	off	on	Car charger switch	{from:Android,operateType:TCP,id:689699572,lang:en-us,params:{id:34,enabled:1},version:1.0}

number

State	Min	Max	Unit	Mult	Name
carTemp	0	80	°C	1	CAR temperature
carUsedTime	0	9999999	min	0.0166	Car use time
carWatts	0	500	W	0.1	CAR output power
chgPowerAC	0	65000	kWh	0.001	Cumulative AC power charged for PD (wall socket)
chgPowerDC	0	65000	kWh	0.001	Cumulative DC power charged for PD (adapter)
chgSunPower	0	65000	kWh	0.001	Cumulative solar power charged
dcInUsedTime	0	9999999	min	0.0166	DC charging time
dsgPowerAC	0	4000	W	0.001	Discharge Power AC
dsgPowerDC	0	4000	W	0.1	Discharge Power DC
invUsedTime	0	9999999	min	0.0166	Inverter use time
mpptUsedTime	0	9999999	min	0.0166	MPPT use time
remainTime	0	143999	min	1	Time remaining (min) > 0: remaining charging time; time remaining (min) < 0: remaining discharging time
soc	0	100	%	1	Displayed SOC
typecUsedTime	0	9999999	min	0.0166	Type-C use time
usb1Watts	0	500	W	1	Common usb1 output power
usb2Watts	0	500	W	1	Common usb2 output power
usbUsedTime	0	9999999	min	0.0166	USB use time
usbqcUsedTime	0	9999999	min	0.0166	USB QC use time
wattsInSum	0	660	W	1	Total input power
wattsOutSum	0	4000	W	1	Total output power
ledWatts	0	100	W	0.1	LED output power
typecTemp	0	80	°C	1	Type-C temperature
typecWatts	0	500	W	1	Type-C output power
usb3Watts	0	500	W	0.1	Common usb3 output power

diagnostic

State	Name	values
errCode	Global error code	{0:OK?}
ledState	LED state	{0:off?,1:on?}

string

State	Name
model	Product model
sysVer	System version
bmsSlave	BMS slave

level

State	Min	Max	Unit	Mult	Name	cmd
standByMode	0	5999	min	1	Device standby time /min 0 Never standby 5999 Max value	{from:Android,operateType:TCP,id:119032574,lang:en-us,params:{id:33,standByMode:360},version:1.0}