Getting both OSDs, Vista goes to low power immediately, cannot toggle in/out of OSD mode….

[TestPilotIan]

Ok, bear with me a bit lol.

I rooted googles and vista units, everything reports fine and if I switch on the debug stuff in the googles, it all works as expected and everything is up to date.

Firstly, I get both lots of OSD’s, the DJI one comes on then after a few seconds the entire DJI OSD goes off, and comes back on with the Betaflight one on top of it, once this happens the vista unit goes into low power mode almost immediately but if I disable the Betaflight osd on both the googles and vista, the DJI OSD works fine and the vista doesn’t go into low power mode (I’ve got a fan on it and the wtf.fpv configurator reports the temp to be no more than 60C).

I’ve seen mention online that to enable the Betaflight OSD you push and hold the back button for 5 seconds, if I do that with the BOSD enabled at startup, nothing happens (presumably because the OSD is operating) but if I do that with the BOSD not enabled in the startup menu in the configurator, after 3 seconds the googles go into the screensaver mode and I have to press any button to get back to the FPV view.

What an I doing something wrong?

any help much appreciated…..

[TestPilotIan]

Think I found the problem, was getting double osd because I forgot to turn off the custom osd lol, still getting the vista unit going into low power mode as soon as you enable osd but I’ll work more on that tomorrow.

BTW I have v1’s googles with 0600 firmware, I can’t seem to upgrade to 0606 through the DJI Assistant, just keeps saying cannot load firmware list 4-10

any ideas on that?