-
-
Notifications
You must be signed in to change notification settings - Fork 293
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Experience with specific vehicles / adapters / mobiles #187
Comments
Vehicle: various |
OBD adapter: Mini ELM327 Scanner Vehicles:
Mobile: Various No-Names (Android 7 - 11) Experience:
Rating of usability:
|
OBD adapter: KOEY OBD2 Diagnosegerät Vehicles:
Mobile: Various No-Names (Android 7 - 11) Experience:
Rating of usability:⭐⭐⭐⭐⭐ |
Vehicle: Ford Focus MK3 FL (2014-2018) OBD adapter: Viaken VSCAN STN1170 (Scantool FTDI drivers) Mobile: Android 11 (Samsung One UI 3.1) Your experience:
Rating of usability ⭐⭐ |
Connection with ECU drops almost immediately after it begins. Sometimes it stays connected long enough to get a list of trouble codes, but it takes a few tries, and it always disconnects after a short time. This makes looking at any real-time data like RPM impossible. Also, the WiFi-based adapter is a pain to connect to, because Android judges its WiFi network to have "no internet". I have to wait for a "no internet" notification to pop up, then click "yes, stay connected", otherwise AndrOBD's attempts to connect to 192.168.0.10 get routed to my phone's LTE connection, even while my phone is connected to the device's WiFi network.
|
OBD Adapter: Mini ELM 327 Phone: Pixel 5a The phone will bluetooth-pair with the adapter. That part seems to go fine. When the app starts, the OBDII device shows up on the list of devices, but when I select that device, the app tries to connect for a few seconds, then gives up. No error messages. |
|
Vehicles: OBD Adapter: FIXD Bluetooth OBD Scanner Mobile: Pixel 3a, CalyxOS (Android 13 Custom Rom) Experience: I was able to see pretty much everything about the Ford Ecosport, but no vehicle info for the Ford Explorer, which was most likely due to it being 2 years after OBD became a standard, and is most likely not capable of displaying vehicle info. However, this device did show me OBD information, as well as codes for both vehicles, despite their large age gap. EDIT: Newer models of this OBD sensor don't work properly at all, giving false codes, as well as not showing obd data. Would not recommend unless you are getting what I believe is the 1st generation of this scanner. Rating is changed accordingly. Rating of usability: ⭐⭐⭐ |
Vehicles: OBD Adapter: BAFX Products OBD2 Scanner Mobile: Pixel 3a, CalyxOS (Android 13 Custom Rom) Experience: This scanner can be slow at first, and can sometimes not show data unless the section you are trying to view is re-selected, but works great. This scanner may also be difficult to plug into some OBD2 ports depending on the vehicle. For example, the scanner had to be jiggled onto the OBD2 port of the Ford Ecosport, but only had to be pushed into place by just a bit on the Ford Explorer. Overall, I would recommend this if you are wanting to get a product that is quality controlled when compared to the other cheap chinese ELM327 scanners. EDIT: Scanner stopped being functional in communication with the Ecosport, but still works with the Explorer. Rating changed accordingly. Rating of usability: ⭐⭐⭐ and 1/2 |
Vehicles: OBD Adapter: Generic OBD2 ELM327 "Branded" Adapters Mobile: Pixel 3a, CalyxOS (Android 13 Custom Rom) Experience: This scanner works well. Virtually no delay or issue with connectivity. This scanner is also very lightweight, as the pcb is smaller, yet still works as good as others. This scanner typically can go for really cheap on ebay or aliexpress, around 5 USD or less. Be sure to look for scanners of this chassis type, and general look. Rating of usability: ⭐⭐⭐⭐⭐ |
Vehicles: OBD Adapter: "HHOBD Advanced" Adapter Mobile: Pixel 3a, CalyxOS (Android 13 Custom Rom) Experience: This scanner isn't too good. When I tried connecting to the Ecosport's ECU, it would keep having issues connecting until I fully turned the vehicle on. This scanner would refuse to connect to the Explorer completely. Avoid. Rating of usability: ⭐⭐ |
Hi community,
Based on some user requests / issues I would like to initiate a information exchange about your user experience to use AndrOBD on certain vehicles, adapters mobiles.
Some of us do have problems using certain adapters for certain vehicles.
This query could help many others to find good working adapters for their vehicles.
Please post comments with following information
Thank you very much
Bet regards
fr3ts0n
The text was updated successfully, but these errors were encountered: