fritzing_mr.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="mr_IN">
<context>
    <name>AboutBox</name>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="91"/>
        <source>&lt;b&gt;GNU GPL v3 on the code and CreativeCommons:BY-SA on the rest</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="102"/>
        <source>&lt;b&gt;2007-%1 Fritzing&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="115"/>
        <source>Fritzing is made by: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="116"/>
        <source>Prof. Reto Wettach, Andr&amp;eacute; Kn&amp;ouml;rig, Myriel Milicevic, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="117"/>
        <source>Zach Eveland, Dirk van Oosterbosch, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="118"/>
        <source>Jonathan Cohen, Marcus Paeschke, Omer Yosha, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="119"/>
        <source>Travis Robertson, Stefan Hermann, Brendan Howell, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="120"/>
        <source>Mariano Crowe, Johannes Landstorfer, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="121"/>
        <source>Jenny Chowdhury, Lionel Michel, Fabian Althaus, Jannis Leidel, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="127"/>
        <source>Special thanks goes out to: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="128"/>
        <source>Jussi &amp;Auml;ngeslev&amp;auml;, Massimo Banzi, Ayah Bdeir, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="129"/>
        <source>Durrell Bishop, David Cuartielles, Fabian Hemmert, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="130"/>
        <source>Gero Herkenrath, Jeff Hoefs, Tom Hulbert, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="131"/>
        <source>Tom Igoe, Hans-Peter Kadel, Till Savelkoul, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="132"/>
        <source>Jan Sieber, Yaniv Steiner, Olaf Val, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="133"/>
        <source>Michaela Vieser and Julia Werner.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="137"/>
        <source>Thanks for the translations go out to: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="139"/>
        <source>Yuelin and Ninjia</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="140"/>
        <source>Chinese (Traditional): </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="140"/>
        <source>Robert Lee</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="146"/>
        <source>Hiroshi Suzuki</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="147"/>
        <source>Jinbuhm Kim</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="152"/>
        <source>Spanish: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="145"/>
        <source>Italian: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="148"/>
        <source>Portuguese (European): </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="149"/>
        <source>Portuguese (Brazilian): </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="139"/>
        <source>Chinese (Simplified): </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="146"/>
        <source>Japanese: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="150"/>
        <source>Russian: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="142"/>
        <source>Dutch: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="141"/>
        <source>Czech: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="147"/>
        <source>Korean: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="151"/>
        <source>Slovak: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="144"/>
        <source>Greek: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="143"/>
        <source>French: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="153"/>
        <source>Turkish: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="138"/>
        <source>Bulgarian: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="64"/>
        <source>Version %1.%2.%3 &lt;br&gt;&lt;small&gt;(%4%5 %6) %7 [Qt %8]&lt;/small&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="122"/>
        <source>Bryant Mairs, Uleshka Asher, Daniel Tzschentke, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="123"/>
        <source>and Kjell Morgenstern </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="154"/>
        <source>Ukrainian: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="154"/>
        <source>Yelyzaveta Chyhryna</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="159"/>
        <source>Fritzing is made possible with funding from the </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="160"/>
        <source>MWFK Brandenburg, the sponsorship of the Design </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="161"/>
        <source>Department of Bauhaus-University Weimar, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="162"/>
        <source>IxDS, an anonymous donor, Parallax, Picaxe, Sparkfun, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="163"/>
        <source>and from each purchase of a Fritzing Starter Kit or a PCB from Fritzing Fab.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="167"/>
        <source>Special thanks goes out as well to all the students </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="168"/>
        <source>and alpha testers who were brave enough to give </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/aboutbox.cpp" line="169"/>
        <source>Fritzing a test spin. </source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AutorouteProgressDialog</name>
    <message>
        <location filename="../src/autoroute/autorouteprogressdialog.cpp" line="92"/>
        <source>zoom and pan controls</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autorouteprogressdialog.cpp" line="132"/>
        <source>Stop Now</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autorouteprogressdialog.cpp" line="136"/>
        <source>Best So Far</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autorouteprogressdialog.cpp" line="142"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Autorouter</name>
    <message>
        <location filename="../src/autoroute/autorouter.cpp" line="334"/>
        <source>Routing canceled! Now cleaning up...</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AutorouterSettingsDialog</name>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="69"/>
        <source>Production type</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="73"/>
        <source>homebrew</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="76"/>
        <source>professional</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="79"/>
        <source>custom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="97"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="98"/>
        <source>OK</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="246"/>
        <source>Keepout</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="249"/>
        <source>&lt;b&gt;Keepout&lt;/b&gt; is the minimum distance between copper elements on different nets.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="253"/>
        <source>A keepout of 0.01 inch (0.254 mm) is a good default.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="256"/>
        <source>Note: the smaller the keepout, the slower the DRC and Autorouter will run.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="295"/>
        <source>Trace width</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BinManager</name>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="105"/>
        <source>Parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="368"/>
        <source>BinManager::setDirtyTab: Couldn&apos;t set the bin &apos;%1&apos; as dirty</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="378"/>
        <source>BinManager::updateTitle: Couldn&apos;t set the bin &apos;%1&apos; as dirty</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="385"/>
        <source>New bin (%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="396"/>
        <source>Select a Fritzing Parts Bin file to open</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="398"/>
        <source>Fritzing Bin Files (*%1 *%2);;Fritzing Bin (*%1);;Fritzing Shareable Bin (*%2)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="491"/>
        <source>Cannot set a NULL bin as the current one</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="908"/>
        <source>Searching...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="982"/>
        <source>Bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="984"/>
        <source>Import...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="985"/>
        <source>Load a Fritzing part (.fzpz), or a Fritzing parts bin (.fzb, .fzbz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="988"/>
        <source>New Bin...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="989"/>
        <source>Create a new parts bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="992"/>
        <source>Close Bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="993"/>
        <source>Close parts bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="996"/>
        <source>Delete Bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="997"/>
        <source>Delete parts bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1000"/>
        <source>Save Bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1001"/>
        <source>Save parts bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1004"/>
        <source>Save Bin As...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1005"/>
        <source>Save parts bin as...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1008"/>
        <source>Export Bin...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1009"/>
        <source>Save parts bin in compressed format...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1012"/>
        <source>Rename Bin...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1013"/>
        <source>Rename parts bin...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1016"/>
        <source>Copy to Sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1017"/>
        <source>Copy all the parts in the bin to a sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1020"/>
        <source>Copy all to Sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1021"/>
        <source>Copy all loaded parts to the sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1024"/>
        <source>Show Bin in List View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1026"/>
        <source>Display parts as a list</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1029"/>
        <source>Show Bin in Icon View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1031"/>
        <source>Display parts as icons</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1052"/>
        <source>Edit Part (new parts editor)...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1053"/>
        <source>Export Part...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1054"/>
        <source>Remove Part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1055"/>
        <source>Find Part in Sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1098"/>
        <source>Delete bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1099"/>
        <source>Do you really want to delete bin &apos;%1&apos;?  This action cannot be undone.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1151"/>
        <source>Read-only bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1151"/>
        <source>This bin cannot be renamed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1158"/>
        <source>Rename bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1159"/>
        <source>Please choose a name for the bin:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1229"/>
        <source>Remove from Bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1229"/>
        <source>Unable to remove part &apos;%1&apos;--it is in use in a sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1235"/>
        <source>Remove from bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1236"/>
        <source>Do you really want to remove &apos;%1&apos; from the bin? This operation cannot be undone.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1333"/>
        <source>Select a Fritzing File to Open</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/binmanager/binmanager.cpp" line="1335"/>
        <source>Fritzing Files (*%1 *%2 *%3);;Fritzing Part (*%1);;Fritzing Bin (*%2);;Fritzing Shareable Bin (*%3)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Board</name>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="87"/>
        <source>

A custom board svg typically has one or two silkscreen layers and one board layer.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="88"/>
        <source>Have a look at the circle_pcb.svg file in your Fritzing installation folder at parts/svg/core/pcb/.

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="124"/>
        <source>one layer (single-sided)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="127"/>
        <source>two layers (double-sided)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="209"/>
        <source>image file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="228"/>
        <source>load image file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="287"/>
        <source>Images</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="301"/>
        <source>Select an image file to load</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="323"/>
        <source>due to an xml problem: %1 line:%2 column:%3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="329"/>
        <source>because the xml is not correctly formatted</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="361"/>
        <source>the &lt;board&gt; element contains no shape elements</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="371"/>
        <source>because there are multiple &lt;board&gt; layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="376"/>
        <source>because there are multiple &lt;silkscreen&gt; layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="381"/>
        <source>because there are multiple &lt;silkscreen0&gt; layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="386"/>
        <source>because there is no &lt;board&gt; layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="391"/>
        <source>the svg contains no shape elements</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="396"/>
        <source>but the pcb itself will have no silkscreen layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="401"/>
        <source>the svg doesn&apos;t fit the custom board format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="433"/>
        <source>&lt;b&gt;The custom shape has been loaded, and you will see the new board shortly.&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="434"/>
        <source>Before actual PCB production we recommend that you test your custom shape by using the &apos;File &gt; Export for Production &gt; Extended Gerber&apos; option. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="435"/>
        <source>Check the resulting contour file with a Gerber-viewer application to make sure the shape came out as expected.&lt;br/&gt;&lt;br/&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="437"/>
        <source>The rest of this message concerns &apos;cutouts&apos;. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="438"/>
        <source>These are circular or irregularly-shaped holes that you can optionally incorporate into a custom PCB shape.&lt;br/&gt;&lt;br/&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="440"/>
        <source>&lt;b&gt;The custom shape has no cutouts.&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <location filename="../src/items/resizableboard.cpp" line="443"/>
        <source>&lt;b&gt;The custom shape has %n cutouts.&lt;/b&gt;</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="445"/>
        <source>&lt;br/&gt;However, the cutouts may not be formatted correctly.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="448"/>
        <source>&lt;br/&gt;&lt;br/&gt;If you intended your custom shape to have cutouts and you did not get the expected result, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="449"/>
        <source>it is because Fritzing requires that you make cutouts using a shape &apos;subtraction&apos; or &apos;difference&apos; operation in your vector graphics editor.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="517"/>
        <source>Unable to load</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="518"/>
        <source>Unable to load image from %1 %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="525"/>
        <source>Can load, but</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="526"/>
        <source>The image from %1 can be loaded, but %2
Use the file?</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BoardLogoItem</name>
    <message>
        <location filename="../src/items/logoitem.cpp" line="1128"/>
        <source>shape</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BreadboardLogoItem</name>
    <message>
        <location filename="../src/items/logoitem.cpp" line="938"/>
        <location filename="../src/items/logoitem.cpp" line="961"/>
        <source>color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="941"/>
        <source>Set text color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="955"/>
        <source>Select text color</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Capacitor</name>
    <message>
        <location filename="../src/items/capacitor.cpp" line="61"/>
        <source>Select from the dropdown, or type in a %1 value</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ConnectorItem</name>
    <message>
        <location filename="../src/connectors/connectoritem.cpp" line="2561"/>
        <source>Add bendpoint</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/connectors/connectoritem.cpp" line="2565"/>
        <source>Straighten curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/connectors/connectoritem.cpp" line="2587"/>
        <source>Remove bendpoint</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ConsoleSettings</name>
    <message>
        <location filename="../src/program/consolesettings.ui" line="14"/>
        <source>Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="20"/>
        <source>Select Parameters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="26"/>
        <source>BaudRate:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="36"/>
        <source>Data bits:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="46"/>
        <source>Parity:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="56"/>
        <source>Stop bits:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="66"/>
        <source>Flow control:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="79"/>
        <source>Select Serial Port</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="88"/>
        <source>Description:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="95"/>
        <source>Manufacturer:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="102"/>
        <source>Serial number:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="109"/>
        <source>Location:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="116"/>
        <source>Vendor ID:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="123"/>
        <source>Product ID:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="148"/>
        <source>Apply</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="157"/>
        <source>Additional options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.ui" line="163"/>
        <source>Local echo</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.cpp" line="89"/>
        <source>Description: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.cpp" line="90"/>
        <source>Manufacturer: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.cpp" line="91"/>
        <source>Serial number: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.cpp" line="92"/>
        <source>Location: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.cpp" line="93"/>
        <source>Vendor Identifier: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.cpp" line="94"/>
        <source>Product Identifier: %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ConsoleWindow</name>
    <message>
        <location filename="../src/program/consolewindow.ui" line="14"/>
        <source>Serial Monitor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="30"/>
        <source>Monitor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="39"/>
        <source>Tools</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="62"/>
        <source>&amp;About</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="65"/>
        <source>About program</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="68"/>
        <source>Alt+A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="73"/>
        <source>About Qt</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="78"/>
        <source>C&amp;onnect</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="81"/>
        <source>Connect to serial port</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="84"/>
        <source>Ctrl+O</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="89"/>
        <source>&amp;Disconnect</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="92"/>
        <source>Disconnect from serial port</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="95"/>
        <source>Ctrl+D</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="100"/>
        <source>&amp;Configure</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="103"/>
        <source>Configure serial port</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="106"/>
        <source>Alt+C</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="111"/>
        <source>C&amp;lear</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="114"/>
        <source>Clear data</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="117"/>
        <source>Alt+L</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="126"/>
        <source>&amp;Quit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.ui" line="129"/>
        <source>Ctrl+Q</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.cpp" line="149"/>
        <source>Connected to %1 : %2, %3, %4, %5, %6</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.cpp" line="153"/>
        <source>Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.cpp" line="155"/>
        <source>Serial port open error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.cpp" line="175"/>
        <source>Disconnected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.cpp" line="181"/>
        <source>About Serial Monitor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.cpp" line="182"/>
        <source>This terminal displays the serial communication on the selected port, usually between your computer and the connected microcontroller.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolewindow.cpp" line="201"/>
        <source>Critical Error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DRC</name>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="237"/>
        <source>DRC was cancelled.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="267"/>
        <source>Your sketch is ready for production: there are no connectors or traces that overlap or are too close together.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="270"/>
        <source>The areas on your board highlighted in red are connectors and traces which may overlap or be too close together. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="271"/>
        <source>Reposition them and run the DRC again to find more problems</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="286"/>
        <source>Fritzing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="369"/>
        <source>Fritzing error: unable to render board svg.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="398"/>
        <source>No traces or connectors to check</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="413"/>
        <source>Unexpected SVG rendering failure--contact fritzing.org</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="437"/>
        <source>Too close to a border (%1 layer)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="547"/>
        <source>%1 is overlapping (%2 layer)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="1021"/>
        <source>A hole in %1 may lie outside the border of the board and would be clipped.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="1118"/>
        <source>Connector %1 on %2 should have both copper top and bottom layers, but the svg only specifies one layer.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DRCResultsDialog</name>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="141"/>
        <source>DRC Results</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="149"/>
        <source>Click on an item in the list to highlight of overlap it refers to.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="153"/>
        <source>Note: the list items and the red highlighting will not update as you edit your sketch--you must rerun the DRC. The highlighting will disappear when you close this dialog.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DebugDialog</name>
    <message>
        <location filename="../src/debugdialog.cpp" line="66"/>
        <source>for debugging</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DeleteDialog</name>
    <message>
        <location filename="../src/program/programtab.cpp" line="84"/>
        <source>Also delete the file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="93"/>
        <source>Remove</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="94"/>
        <source>Don&apos;t remove</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Dip</name>
    <message>
        <location filename="../src/items/dip.cpp" line="55"/>
        <source>chip label</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FApplication</name>
    <message>
        <location filename="../src/fapplication.cpp" line="1599"/>
        <location filename="../src/fapplication.cpp" line="1605"/>
        <location filename="../src/fapplication.cpp" line="1608"/>
        <source>Fritzing failure</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="1599"/>
        <source>Fritzing caught an exception %1 from %2 in event %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="1605"/>
        <source>Fritzing caught an exception from %1 in event %2: %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="1608"/>
        <source>Fritzing caught an exception from %1 in event %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="1736"/>
        <source>Please specify an .fzz file name to save to (cancel will delete the backup)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="1736"/>
        <source>Fritzing (*%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="2008"/>
        <source>Regenerate parts database?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="2009"/>
        <source>Regenerating the parts database will take some minutes and you will have to restart Fritzing

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="2010"/>
        <source>Would you like to regenerate the parts database?
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="2018"/>
        <source>Regenerate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="2019"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="2024"/>
        <source>Regenerating parts database...</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FirstTimeHelpDialog</name>
    <message>
        <location filename="../src/help/firsttimehelpdialog.cpp" line="37"/>
        <source>First Time Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/firsttimehelpdialog.cpp" line="82"/>
        <source>&lt;br/&gt;The &lt;b&gt;Breadboard View&lt;/b&gt; is meant to look like a &lt;i&gt;real-life&lt;/i&gt; breadboard prototype.&lt;br/&gt;&lt;br/&gt;Begin by dragging a part from the Parts Bin, which is over at the top right. Then pull in more parts, connecting them by placing them on the breadboard or clicking on the connectors and dragging wires. The process is similar to how you would arrange things in the physical world. &lt;br/&gt;&lt;br/&gt;After you&apos;re finished creating your sketch in the breadboard view, try the other views. You can switch views by clicking the Tabs at the top of the window. Because different views have different purposes, parts will look different in the other views.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/firsttimehelpdialog.cpp" line="95"/>
        <source>Welcome to the &lt;b&gt;Schematic View&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;This is a more abstract way to look at components and connections than the Breadboard View. You have the same elements as you have on your breadboard, they just look different. This representation is closer to the traditional diagrams used by engineers.&lt;br/&gt;&lt;br/&gt;After you have drawn wires between parts, you can press &amp;lt;Shift&amp;gt;-click with the mouse to create bend points and tidy up your connections. The Schematic View can help you check that you have made the right connections between components. You can also print out your schematic for documentation.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/firsttimehelpdialog.cpp" line="107"/>
        <source>The &lt;b&gt;PCB View&lt;/b&gt; is where you layout the components will  on a physical PCB (Printed Circuit Board).&lt;br/&gt;&lt;br/&gt;PCBs can be made at home or in a small lab using DIY etching processes. They also can be sent to professional PCB manufacturing services for more precise fabrication. &lt;br/&gt;&lt;table&gt;&lt;tr&gt;&lt;td&gt;The first thing you will need is a board to place your parts on. There should already be one in your sketch, but if not, drag in the board icon from the Parts Bin. The icon matches the image to the right: &lt;/td&gt;&lt;td&gt;&lt;img src=&quot;:resources/parts/svg/core/icon/rectangle_pcb.svg&quot; /&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;&lt;br/&gt;&lt;br/&gt;To lay out your PCB, arrange all the components so they fit nicely on the board. Then try to shift them around to minimize the length and confusion of connections. You can also resize rectangular boards. &lt;br/&gt;&lt;table&gt;&lt;tr&gt;&lt;td&gt;Once the parts are sorted out, you connect them with copper traces. You can drag out a trace from individual connections or use the autorouter to generate them. The Autoroute button is at the bottom of the window. The button matches the image to the right:&lt;/td&gt;&lt;td&gt;&lt;img src=&quot;:resources/images/icons/toolbarAutorouteEnabled_icon.png&quot; /&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FolderUtils</name>
    <message>
        <location filename="../src/utils/folderutils.cpp" line="756"/>
        <source>Moving your custom parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/utils/folderutils.cpp" line="757"/>
        <source>&lt;p&gt;Your custom-made parts and bins are moved from the hidden app data folder to your fritzing documents folder at &lt;br/&gt;&lt;br/&gt;&lt;em&gt;%1&lt;/em&gt;&lt;br/&gt;&lt;br/&gt;This way we hope to make it easier for you to find and edit them manually.&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FritzingWindow</name>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="66"/>
        <source>&amp;Close Window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="67"/>
        <source>Ctrl+W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="68"/>
        <source>Close the current sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="73"/>
        <source>%1 - %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="127"/>
        <source>Specify a file name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="217"/>
        <source>Save...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="220"/>
        <source>Save</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="222"/>
        <source>Don&apos;t Save</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="224"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="228"/>
        <source>Ctrl+D</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="236"/>
        <source>Save &quot;%1&quot;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="237"/>
        <source>Do you want to save the changes you made in the document &quot;%1&quot;?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="238"/>
        <source>Your changes will be lost if you don&apos;t save them.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GroundFillSeedDialog</name>
    <message>
        <location filename="../src/dialogs/groundfillseeddialog.cpp" line="50"/>
        <source>The difference between a &apos;ground fill&apos; and plain &apos;copper fill&apos; is that in a ground fill, the flooded area includes traces and connectors that are connected to &apos;ground&apos; connectors. Ground connectors are usually labeled &apos;GND&apos; or &apos;ground&apos; but sometimes this is not the case. It also may be that there are multiple nets with a ground connector, and you might only want one of the nets to be filled.

This dialog collects only connectors labeled &apos;GND&apos; or &apos;ground&apos;, as well as connectors already chosen as seeds.

Click an item to highlight its connections in the sketch.

It is also possible to choose a connector as a ground fill seed by right-clicking a connector and choosing the &apos;Set Ground Fill Seed&apos; context menu option.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/groundfillseeddialog.cpp" line="84"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/groundfillseeddialog.cpp" line="88"/>
        <source>OK</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/groundfillseeddialog.cpp" line="123"/>
        <source>OK and ground fill</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/groundfillseeddialog.cpp" line="123"/>
        <source>OK and copper fill</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Hole</name>
    <message>
        <location filename="../src/items/hole.cpp" line="283"/>
        <source>hole size</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>HtmlInfoView</name>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="161"/>
        <source>Change the part label here</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="188"/>
        <source>Part breadboard view image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="190"/>
        <source>Part schematic view image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="192"/>
        <source>Part pcb view image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="199"/>
        <source>Part version number</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="958"/>
        <source>Locked</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="960"/>
        <source>Change the locked state of the part in this view. A locked part can&apos;t be moved.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="966"/>
        <source>Sticky</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="968"/>
        <source>Change the &quot;sticky&quot; state of the part in this view. When a sticky part is moved, objects on top of it also move.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="267"/>
        <source>Properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="227"/>
        <source>Placement</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="237"/>
        <source>pcb layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="279"/>
        <source>Tags</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="290"/>
        <source>Connections</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="303"/>
        <source>conn.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="310"/>
        <source>name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="317"/>
        <source>type</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <location filename="../src/infoview/htmlinfoview.cpp" line="385"/>
        <source>connected to %n item(s)</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="422"/>
        <source>(autoroutable)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="423"/>
        <source>Wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="426"/>
        <source>Ratsnest wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="429"/>
        <source>Trace wire %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="724"/>
        <source>v. %1 %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="724"/>
        <source>obsolete</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="978"/>
        <source>location</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="1028"/>
        <source>rotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/infoview/htmlinfoview.cpp" line="1050"/>
        <source>degrees</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ItemBase</name>
    <message>
        <location filename="../src/items/itembase.cpp" line="213"/>
        <source>family</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="214"/>
        <source>type</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="215"/>
        <source>model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="216"/>
        <source>size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="217"/>
        <source>color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="218"/>
        <source>resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="219"/>
        <source>capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="220"/>
        <source>inductance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="221"/>
        <source>voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="222"/>
        <source>current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="223"/>
        <source>power</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="224"/>
        <location filename="../src/items/itembase.cpp" line="236"/>
        <source>pin spacing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="225"/>
        <source>rated power</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="226"/>
        <source>rated voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="227"/>
        <source>rated current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="228"/>
        <source>version</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="229"/>
        <source>package</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="230"/>
        <source>shape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="231"/>
        <source>form</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="232"/>
        <source>part number</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="233"/>
        <source>maximum resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="234"/>
        <source>pins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="235"/>
        <source>spacing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="237"/>
        <source>frequency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="238"/>
        <source>processor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="239"/>
        <source>variant</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="240"/>
        <source>layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="241"/>
        <source>tolerance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="242"/>
        <source>descr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="243"/>
        <source>filename</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="244"/>
        <source>title</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="245"/>
        <source>date</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="246"/>
        <source>rev</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="247"/>
        <source>sheet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="248"/>
        <source>project</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="249"/>
        <source>banded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="250"/>
        <source>top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="251"/>
        <source>bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="252"/>
        <source>copper bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="253"/>
        <source>copper top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="254"/>
        <source>silkscreen bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="255"/>
        <source>silkscreen top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="261"/>
        <source>Part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="1284"/>
        <source>model part problem</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="1306"/>
        <source>file for %1 %2 not found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/itembase.cpp" line="1409"/>
        <source>unable to create renderer for svg %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>KicadModuleDialog</name>
    <message>
        <location filename="../src/partseditor/kicadmoduledialog.cpp" line="56"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/kicadmoduledialog.cpp" line="57"/>
        <source>OK</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LayerPalette</name>
    <message>
        <location filename="../src/dock/layerpalette.cpp" line="31"/>
        <source>show all layers</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LinkDialog</name>
    <message>
        <location filename="../src/items/note.cpp" line="163"/>
        <source>url:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/note.cpp" line="168"/>
        <source>text:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/note.cpp" line="175"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/note.cpp" line="176"/>
        <source>OK</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LogoItem</name>
    <message>
        <location filename="../src/items/logoitem.cpp" line="244"/>
        <location filename="../src/items/logoitem.cpp" line="651"/>
        <source>text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="268"/>
        <source>shape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="343"/>
        <source>due to a rendering error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="357"/>
        <source>because the svg is empty</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="362"/>
        <source>because this appears to be a SVG file exported from CorelDRAW without choosing the &apos;presentation attributes&apos; setting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="376"/>
        <source>due to an xml problem: %1 line:%2 column:%3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="382"/>
        <source>because the file has no root element</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="387"/>
        <source>because the file has no &lt;svg&gt; element</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="425"/>
        <source>for unknown reasons--possibly the image file is corrupted</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="442"/>
        <source>Unable to display</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/logoitem.cpp" line="443"/>
        <source>Unable to display image from %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MainWindow</name>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="384"/>
        <source>Ctrl+R</source>
        <comment>Rotate Clockwise</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="386"/>
        <source>Alt+Ctrl+R</source>
        <comment>Rotate Clockwise</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="388"/>
        <source>Meta+Ctrl+R</source>
        <comment>Rotate Clockwise</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="391"/>
        <source>Shift+Ctrl+R</source>
        <comment>Rotate Counterclockwise</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="393"/>
        <source>Alt+Shift+Ctrl+R</source>
        <comment>Rotate Counterclockwise</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="395"/>
        <source>Meta+Shift+Ctrl+R</source>
        <comment>Rotate Counterclockwise</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="398"/>
        <source>Shift+Ctrl+Tab</source>
        <comment>Toggle Active Layer</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="589"/>
        <source>Breadboard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="598"/>
        <source>Schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="607"/>
        <source>PCB</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="920"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1302"/>
        <source>Rotate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="928"/>
        <source>Share</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="938"/>
        <source>Flip</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="946"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2694"/>
        <source>Autoroute</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="974"/>
        <source>Both Layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="979"/>
        <source>Bottom Layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="984"/>
        <source>Top Layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1018"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="904"/>
        <source>Add a note</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1029"/>
        <source>Export for PCB</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1120"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="153"/>
        <source>Ready</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1310"/>
        <source>Save %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1415"/>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1433"/>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1658"/>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1701"/>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1716"/>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1726"/>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1791"/>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2368"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="173"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="178"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="624"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="677"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="764"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="938"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1044"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1263"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1638"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1643"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="226"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="237"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="298"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2455"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2638"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2927"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2932"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3215"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3220"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3249"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3254"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3815"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3958"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4182"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4188"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4313"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4318"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4330"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4335"/>
        <source>Fritzing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1434"/>
        <source>No Sketch found in &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1416"/>
        <source>Unable to open &apos;%1&apos;: %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="907"/>
        <source>Click to highlight unconnected parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="954"/>
        <source>Fabricate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1001"/>
        <source>View from Above</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1008"/>
        <source>View from Below</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1659"/>
        <source>Unable to open shareable &apos;%1&apos;: %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1702"/>
        <source>Unable to open shareable part &apos;%1&apos;: %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1727"/>
        <source>Unable to load part from &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1756"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="857"/>
        <source>Specify a file name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1758"/>
        <source>Fritzing Part (*%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1792"/>
        <source>Unable to export %1 to shareable sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1831"/>
        <source>MainWindow::moveToPartsFolder mainwindow missing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1841"/>
        <source>There is already a part with id &apos;%1&apos; loaded into Fritzing.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1900"/>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2980"/>
        <source>Do you want to keep the imported parts?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1974"/>
        <source>No connections to route</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="1977"/>
        <source>Routing completed</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <location filename="../src/mainwindow/mainwindow.cpp" line="1980"/>
        <source>Routing completed using %n jumper part(s)</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <location filename="../src/mainwindow/mainwindow.cpp" line="1983"/>
        <source>%1 of %2 nets routed - %n connector(s) still to be routed</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2004"/>
        <source>%1 - [%2]</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2110"/>
        <source>No copper top layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2111"/>
        <source>The copper top (copper 1) layer is not available on a one-sided board.  Please switch the board to double-sided or choose the copper bottom (copper 0) layer.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2189"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3896"/>
        <source>Sorry!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2190"/>
        <source>No part with those characteristics.
We&apos;re working to avoid this message, and only let you choose between properties that do exist</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2202"/>
        <source>No exactly matching part found; Fritzing chose the closest match.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2239"/>
        <source>Change to single layer pcb</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2239"/>
        <source>Change to two layer pcb</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2272"/>
        <source>Swapped %1 with module %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2307"/>
        <source>Change image to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2369"/>
        <source>Svg %1 is missing a &apos;%2&apos; layer. For more information on how to create a custom board shape, see the tutorial at &lt;a href=&apos;http://fritzing.org/learning/tutorials/designing-pcb/pcb-custom-shape/&apos;&gt;http://fritzing.org/learning/tutorials/designing-pcb/pcb-custom-shape/&lt;/a&gt;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2407"/>
        <source>loading %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2416"/>
        <source>Loading...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2422"/>
        <source>new sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2473"/>
        <source>Schematic conversion</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2474"/>
        <source>Saving this sketch will convert it to the new schematic graphics standard. Go ahead and convert?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2584"/>
        <source>Backing up &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2679"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="857"/>
        <source>Fritzing (*%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2680"/>
        <source>Fritzing uncompressed (*%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2735"/>
        <source>Unrouted connections</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2736"/>
        <source>There are no unrouted connections in this view.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2786"/>
        <source>(x,y)=(%1, %2) %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="2791"/>
        <source>(x, y)=(%1, %2)	(width, height)=(%3, %4) %5</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="3078"/>
        <source>Code</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="3137"/>
        <source>Welcome</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_dock.cpp" line="62"/>
        <source>Inspector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_dock.cpp" line="64"/>
        <source>Undo History</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_dock.cpp" line="67"/>
        <source>Layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_dock.cpp" line="195"/>
        <source>Couldn&apos;t get the dock widget</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="128"/>
        <source>PDF (*.pdf)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="129"/>
        <source>PNG Image (*.png)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="130"/>
        <source>JPEG Image (*.jpg)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="131"/>
        <source>SVG Image (*.svg)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="132"/>
        <source>BoM Text File (*.html)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="151"/>
        <source>Printing...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="174"/>
        <source>Your sketch does not have a board yet! Please add a PCB in order to export etchable.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="179"/>
        <source>Etchable export can only handle one board at a time--please select the board you want to export.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="188"/>
        <source>All traces have not yet been routed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="189"/>
        <source>Do you want to proceed anyway?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="191"/>
        <source>Proceed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="192"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3997"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="208"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1648"/>
        <source>Choose a folder for exporting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="340"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="544"/>
        <source>Sketch exported</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="523"/>
        <source>Export...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="542"/>
        <source>Exporting...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="624"/>
        <source>Unable to save %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="677"/>
        <source>Cannot print to %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="765"/>
        <source>Cannot write file %1:
%2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="780"/>
        <source>Saved &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="939"/>
        <source>Unable to export %1 as shareable</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="951"/>
        <source>&amp;Save</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="952"/>
        <source>Ctrl+S</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="953"/>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="958"/>
        <source>Save the current sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="956"/>
        <source>&amp;Save As...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="957"/>
        <source>Shift+Ctrl+S</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="961"/>
        <source>Share online...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="962"/>
        <source>Post a project to the Fritzing website</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="965"/>
        <source>JPG...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="967"/>
        <source>Export the visible area of the current sketch as a JPG image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="970"/>
        <source>PNG...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="972"/>
        <source>Export the visible area of the current sketch as a PNG image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="975"/>
        <source>PDF...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="977"/>
        <source>Export the visible area of the current sketch as a PDF image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="980"/>
        <source>SVG...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="982"/>
        <source>Export the current sketch as an SVG image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="985"/>
        <source>List of parts (&amp;Bill of Materials)...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="987"/>
        <source>Save a Bill of Materials (BoM)/Shopping List as text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="990"/>
        <source>XML Netlist...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="992"/>
        <source>Save a netlist in XML format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="995"/>
        <source>SPICE Netlist...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="997"/>
        <source>Save a netlist in SPICE format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1000"/>
        <source>Eagle...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1002"/>
        <source>Export the current sketch to Eagle CAD</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1005"/>
        <source>Extended Gerber (RS-274X)...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1007"/>
        <source>Export the current sketch to Extended Gerber format (RS-274X) for professional PCB production</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1010"/>
        <source>Etchable (PDF)...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1011"/>
        <source>Export the current sketch to PDF for DIY PCB production (photoresist)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1015"/>
        <source>Etchable (SVG)...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1016"/>
        <source>Export the current sketch to SVG for DIY PCB production (photoresist)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1025"/>
        <source>&amp;Print...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1026"/>
        <source>Ctrl+P</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1027"/>
        <source>Print the current view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1035"/>
        <source>This will soon provide an export of your Fritzing sketch to the EAGLE layout software. If you&apos;d like to have more exports to your favourite EDA tool, please let us know, or contribute.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1099"/>
        <source>Export SVG...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1246"/>
        <source>Export Bill of Materials (BoM)...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1263"/>
        <source>Unable to save BOM file, but the text is on the clipboard.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1292"/>
        <source>Export SPICE Netlist...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1562"/>
        <source>Export Netlist...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1639"/>
        <source>Your sketch does not have a board yet!  Please add a PCB in order to export to Gerber.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1644"/>
        <source>Gerber export can only handle one board at a time--please select the board you want to export.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_export.cpp" line="1669"/>
        <source>Sketch exported to Gerber</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="161"/>
        <source>Select a Fritzing File to Open</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="163"/>
        <source>Fritzing Files (*%1 *%2 *%3 *%4 *%5);;Fritzing (*%1);;Fritzing Shareable (*%2);;Fritzing Part (*%3);;Fritzing Bin (*%4);;Fritzing Shareable Bin (*%5)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="227"/>
        <source>Cannot find file %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="238"/>
        <source>Cannot read file  1 %1:
%2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="255"/>
        <source>Revert?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="256"/>
        <source>This operation can not be undone--you will lose all of your changes.

Go ahead and revert?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="298"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2638"/>
        <source>File &apos;%1&apos; not found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3588"/>
        <source>Convert</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3589"/>
        <source>Read-only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="327"/>
        <source>directly loading parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="357"/>
        <source>loading %1 (model)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="388"/>
        <source>loading %1 (breadboard)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="397"/>
        <source>loading %1 (pcb)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="407"/>
        <source>loading %1 (schematic)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="608"/>
        <source>New</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="609"/>
        <source>Ctrl+N</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="610"/>
        <source>Create a new sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="613"/>
        <source>&amp;Open...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="614"/>
        <source>Ctrl+O</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="615"/>
        <source>Open a Fritzing sketch (.fzz, .fz), or load a Fritzing part (.fzpz), or a Fritzing parts bin (.fzb, .fzbz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="618"/>
        <source>Revert</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="619"/>
        <source>Reload the sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="633"/>
        <source>Shell launch %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="638"/>
        <source>throw test exception</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="639"/>
        <source>throw a fake exception to see what happens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="643"/>
        <source>&amp;Quit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="644"/>
        <source>Ctrl+Q</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="645"/>
        <source>Quit the application</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="652"/>
        <source>&amp;Open Example</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="680"/>
        <source>All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="732"/>
        <source>MainWindow::populateMenuWithIndex: couldn&apos;t load example with id=&apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="784"/>
        <source>&amp;Open Recent Files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="818"/>
        <source>&amp;%1 %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="837"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="839"/>
        <source>Undo</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="841"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="843"/>
        <source>Redo</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="845"/>
        <source>&amp;Cut</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="847"/>
        <source>Cut selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="850"/>
        <source>&amp;Copy</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="852"/>
        <source>Copy selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="855"/>
        <source>&amp;Paste</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="857"/>
        <source>Paste clipboard contents</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="860"/>
        <source>Paste in Place</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="862"/>
        <source>Paste clipboard contents in place</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="865"/>
        <source>&amp;Duplicate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="866"/>
        <source>Ctrl+D</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="867"/>
        <source>Duplicate selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="870"/>
        <source>&amp;Delete</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="871"/>
        <source>Delete selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="887"/>
        <source>&amp;Delete Wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="894"/>
        <source>&amp;Select All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="896"/>
        <source>Select all elements</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="899"/>
        <source>&amp;Deselect</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="900"/>
        <source>Deselect</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="903"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3067"/>
        <source>Add Note</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="907"/>
        <source>&amp;Preferences...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="908"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1256"/>
        <source>Show the application&apos;s about box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="914"/>
        <source>Edit (new parts editor)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="915"/>
        <source>Open the new parts editor on an existing part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1338"/>
        <source>&amp;Add to bin...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1339"/>
        <source>Add selected part to bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="918"/>
        <source>Disconnect All Wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="919"/>
        <source>Disconnect all wires connected to this connector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="923"/>
        <source>Update InfoView on hover</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="930"/>
        <source>Export Normalized SVG</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="931"/>
        <source>Export 1000 dpi SVG of this part in this view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="934"/>
        <source>Export Normalized Flattened SVG</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="935"/>
        <source>Export 1000 dpi Flattened SVG of this part in this view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="938"/>
        <source>Dump all parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="939"/>
        <source>Debug dump all parts in this view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="942"/>
        <source>Test Connectors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="943"/>
        <source>Connect all connectors to a single test part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="949"/>
        <source>Rotate 45° Clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="950"/>
        <source>Rotate current selection 45 degrees clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="953"/>
        <source>Rotate 90° Clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="954"/>
        <source>Rotate the selected parts by 90 degrees clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="957"/>
        <source>Rotate 180°</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="958"/>
        <source>Rotate the selected parts by 180 degrees</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="961"/>
        <source>Rotate 90° Counter Clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="962"/>
        <source>Rotate current selection 90 degrees counter clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="965"/>
        <source>Rotate 45° Counter Clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="966"/>
        <source>Rotate current selection 45 degrees counter clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="969"/>
        <source>&amp;Flip Horizontal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="970"/>
        <source>Flip current selection horizontally</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="973"/>
        <source>&amp;Flip Vertical</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="974"/>
        <source>Flip current selection vertically</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="977"/>
        <source>Bring to Front</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="978"/>
        <source>Shift+Ctrl+]</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="979"/>
        <source>Bring selected object(s) to front of their layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="984"/>
        <source>Bring Forward</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="985"/>
        <source>Ctrl+]</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="986"/>
        <source>Bring selected object(s) forward in their layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="991"/>
        <source>Send Backward</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="992"/>
        <source>Ctrl+[</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="993"/>
        <source>Send selected object(s) back in their layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="998"/>
        <source>Send to Back</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="999"/>
        <source>Shift+Ctrl+[</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1000"/>
        <source>Send selected object(s) to the back of their layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1005"/>
        <source>Align Left</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1006"/>
        <source>Align selected items at the left</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1009"/>
        <source>Align Horizontal Center</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1010"/>
        <source>Align selected items at the horizontal center</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1013"/>
        <source>Align Right</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1014"/>
        <source>Align selected items at the right</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1017"/>
        <source>Align Top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1018"/>
        <source>Align selected items at the top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1021"/>
        <source>Align Vertical Center</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1022"/>
        <source>Align selected items at the vertical center</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1025"/>
        <source>Align Bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1026"/>
        <source>Align selected items at the bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1029"/>
        <source>Lock Part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1030"/>
        <source>Prevent a part from being moved</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1034"/>
        <source>Sticky</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1035"/>
        <source>If a &quot;sticky&quot; part is moved, parts on top of it are also moved</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1039"/>
        <source>Select All Locked Parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1040"/>
        <source>Select all parts that can&apos;t be moved</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1043"/>
        <source>&amp;Show part label</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1044"/>
        <source>Show/hide the label for the selected parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1047"/>
        <source>&amp;Export...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1048"/>
        <source>Export selected part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1051"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3119"/>
        <source>Add Bendpoint</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1052"/>
        <source>Add a bendpoint to the selected wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1055"/>
        <source>Convert Bendpoint to Via</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1056"/>
        <source>Convert the bendpoint to a via</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1059"/>
        <source>Convert Via to Bendpoint</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1060"/>
        <source>Convert the via to a bendpoint</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1063"/>
        <source>Straighten Curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1064"/>
        <source>Straighten the curve of the selected wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1067"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1068"/>
        <source>Select outdated parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1071"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1072"/>
        <source>Update selected parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1075"/>
        <source>Find part in sketch...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1076"/>
        <source>Search for parts in a sketch by matching text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1224"/>
        <source>Open programming window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1225"/>
        <source>Open microcontroller programming window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1079"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1927"/>
        <source>Hide part silkscreen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1080"/>
        <source>Hide/show the silkscreen layer for only this part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1090"/>
        <source>&amp;Zoom In</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1091"/>
        <source>Ctrl++</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1092"/>
        <source>Zoom in</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1098"/>
        <source>Ctrl+=</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1102"/>
        <source>&amp;Zoom Out</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1103"/>
        <source>Ctrl+-</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1104"/>
        <source>Zoom out</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1107"/>
        <source>&amp;Fit in Window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1108"/>
        <source>Ctrl+0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1109"/>
        <source>Fit in window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1112"/>
        <source>&amp;Actual Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1113"/>
        <source>Actual (real world physical) size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1116"/>
        <source>100% Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1117"/>
        <source>Shift+Ctrl+0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1118"/>
        <source>100% (pixel) size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1121"/>
        <source>Align to Grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1122"/>
        <source>Align items to grid when dragging</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1131"/>
        <source>Show Grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1132"/>
        <source>Show the grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1136"/>
        <source>Set Grid Size...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1137"/>
        <source>Set the size of the grid in this view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1140"/>
        <source>Set Background Color...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1141"/>
        <source>Set the background color of this view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1145"/>
        <source>Ctrl+5</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1148"/>
        <source>&amp;Show Welcome</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1150"/>
        <source>Show the welcome view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1155"/>
        <source>&amp;Show Breadboard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1145"/>
        <source>Ctrl+1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1157"/>
        <source>Show the breadboard view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1161"/>
        <source>&amp;Show Schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1145"/>
        <source>Ctrl+2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1163"/>
        <source>Show the schematic view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1167"/>
        <source>&amp;Show PCB</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1145"/>
        <source>Ctrl+3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1169"/>
        <source>Show the PCB view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1174"/>
        <source>Show Code</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1176"/>
        <source>Show the code (programming) view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1328"/>
        <source>Align</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1753"/>
        <source>Move to bottom layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1756"/>
        <source>Move to top layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2141"/>
        <source>top and bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2144"/>
        <source>bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2146"/>
        <source>top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2148"/>
        <source>Ground Fill (%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2149"/>
        <source>Copper Fill (%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2816"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2822"/>
        <source>View from below</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2817"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2823"/>
        <source>View the PCB from the bottom layers upwards</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2827"/>
        <source>View from above</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2828"/>
        <source>View the PCB from the top layers downwards</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3830"/>
        <source>There are %n outdated part(s) in this sketch. </source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3831"/>
        <source>We strongly recommend that you update these %n parts  to the latest version. </source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3832"/>
        <source>This may result in changes to your sketch, as parts or connectors may be shifted. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4403"/>
        <source>%1 background</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4436"/>
        <source>Enter Text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4437"/>
        <source>Text will match part label, description, title, etc. Enter text to search for:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4475"/>
        <source>Search</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4475"/>
        <source>No parts matched search term &apos;%1&apos;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1145"/>
        <source>Ctrl+4</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="879"/>
        <source>Delete Minus</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="880"/>
        <source>Delete selection without attached wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="891"/>
        <source>Delete Wire up to bendpoints</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1185"/>
        <source>Show Parts Bin Icon View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1186"/>
        <source>Display the parts bin in an icon view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1190"/>
        <source>Show Parts Bin List View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1191"/>
        <source>Display the parts bin in a list view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1195"/>
        <source>&amp;Show All Layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1196"/>
        <source>Show all the available layers for the current view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1199"/>
        <source>&amp;Hide All Layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1200"/>
        <source>Hide all the layers of the current view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1206"/>
        <source>&amp;Minimize</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1207"/>
        <source>Ctrl+M</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1208"/>
        <source>Minimize current window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1220"/>
        <source>Debugger Output</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1230"/>
        <source>Online Tutorials</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1231"/>
        <source>Ctrl+?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1232"/>
        <source>Open Fritzing help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1235"/>
        <source>Donate to Fritzing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1236"/>
        <source>Open Fritzing donation web page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1239"/>
        <source>Online Projects Gallery</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1240"/>
        <source>Open Fritzing examples</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1243"/>
        <source>Online Parts Reference</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1244"/>
        <source>Open Parts Reference</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1264"/>
        <source>First Time Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1251"/>
        <source>Check for updates...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1252"/>
        <source>Check whether a newer version of Fritzing is available for download</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1255"/>
        <source>&amp;About</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1260"/>
        <source>Tips, Tricks and Shortcuts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1261"/>
        <source>Display some handy Fritzing tips and tricks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1265"/>
        <source>Display First Time Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1268"/>
        <source>&amp;About Qt</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1269"/>
        <source>Show Qt&apos;s about box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1272"/>
        <source>Report a bug...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1273"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1277"/>
        <source>Report a but you&apos;ve found in Fritzing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1276"/>
        <source>Enable debugging log</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1282"/>
        <source>Parts Editor Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1283"/>
        <source>Display Parts Editor help in a browser</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1345"/>
        <source>&amp;File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1363"/>
        <source>&amp;Export</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1395"/>
        <source>as Image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1402"/>
        <source>for Production</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1412"/>
        <source>&amp;Edit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1435"/>
        <source>&amp;Part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1311"/>
        <source>Raise and Lower</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="861"/>
        <source>Ctrl+Shift+V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1083"/>
        <source>Regenerate parts database ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1084"/>
        <source>Regenerate the parts database (should only be used if your parts database is broken)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1126"/>
        <source>Color Breadboard Wires By Length</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1127"/>
        <source>Display breadboard wires using standard color coding by length</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1475"/>
        <source>&amp;View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1506"/>
        <source>&amp;Window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1516"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1554"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1567"/>
        <source>&amp;Routing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1522"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2764"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3228"/>
        <source>Ground Fill</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1581"/>
        <source>&amp;Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1808"/>
        <source>Delete Ratsnest Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1811"/>
        <source>Delete Wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1859"/>
        <source>Hide part label</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1859"/>
        <source>Show part label</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="1927"/>
        <source>Show part silkscreen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2064"/>
        <source>Delete</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2233"/>
        <source>Actual Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2234"/>
        <source>It doesn&apos;t seem to be possible to automatically determine the actual physical size of the monitor, so &apos;actual size&apos; as currently implemented is only a guess. Your best bet would be to drag out a ruler part, then place a real (physical) ruler on top and zoom until they match up.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2451"/>
        <source>Page Setup</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2456"/>
        <source>Sorry, &quot;%1&quot; has not been implemented yet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2695"/>
        <source>Autoroute connections...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2696"/>
        <source>Shift+Ctrl+A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2702"/>
        <source>&amp;Create trace from ratsnest</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2703"/>
        <source>Create a trace from the ratsnest line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2706"/>
        <source>&amp;Create wire from ratsnest</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2707"/>
        <source>Create a wire from the ratsnest line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2711"/>
        <source>Do not autoroute</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2712"/>
        <source>When autorouting, do not rip up this trace wire, via, or jumper item</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2718"/>
        <source>Move to other side of the board</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2719"/>
        <source>Move selected traces to the other side of the board (note: the &apos;first&apos; trace will be moved and the rest will follow to the same side)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2724"/>
        <source>Show unrouted</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2725"/>
        <source>Highlight all unrouted connectors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2728"/>
        <source>Select All Traces</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2729"/>
        <source>Select all trace wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2732"/>
        <source>Select All Wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2733"/>
        <source>Select all wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2736"/>
        <source>Select All CopperFill</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2737"/>
        <source>Select all copper fill items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2740"/>
        <source>Force Update Routing Status and Ratsnests</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2741"/>
        <source>Recalculate routing status and ratsnest wires (in case the auto-update isn&apos;t working correctly)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2744"/>
        <source>Select All &quot;Don&apos;t Autoroute&quot; Traces</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2745"/>
        <source>Select all trace wires excluded from autorouting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2748"/>
        <source>Select All Autoroutable Traces</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2749"/>
        <source>Select all trace wires that can be changed during autorouting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2752"/>
        <source>Select All Jumpers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2753"/>
        <source>Select all jumper item parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2756"/>
        <source>Select All Vias</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2757"/>
        <source>Select all via parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2760"/>
        <source>Tidy Wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2761"/>
        <source>Tidy selected wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2765"/>
        <source>Fill empty regions of the copper layer--fill will include all traces connected to a GROUND</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2768"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3228"/>
        <source>Copper Fill</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2769"/>
        <source>Fill empty regions of the copper layer--not including traces connected to a GROUND</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2772"/>
        <source>Remove Copper Fill</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2773"/>
        <source>Remove the copper fill</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2776"/>
        <source>Choose Ground Fill Seed(s)...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2777"/>
        <source>Fill empty regions of the copper layer--fill will include all traces connected to the seeds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2780"/>
        <source>Set Ground Fill Seed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2781"/>
        <source>Treat this connector and its connections as a &apos;ground&apos; during ground fill.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2785"/>
        <source>Clear Ground Fill Seeds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2786"/>
        <source>Clear ground fill seeds--enable copper fill only.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2789"/>
        <source>Set Ground Fill Keepout...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2790"/>
        <source>Set the minimum distance between ground fill and traces or connectors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2795"/>
        <source>Design Rules Check (DRC)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2796"/>
        <source>Highlights any parts that are too close together for safe board production</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2797"/>
        <source>Shift+Ctrl+D</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2800"/>
        <source>Check Loaded Traces</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2801"/>
        <source>Select any traces where the screen location doesn&apos;t match the actual location. Only needed for sketches autorouted with version 0.7.10 or earlier</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2804"/>
        <source>Autorouter/DRC settings...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2805"/>
        <source>Set autorouting parameters including keepout...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2808"/>
        <source>Fritzing Fab Quote...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2809"/>
        <source>How much would it could to produce a PCB from this sketch with Fritzing Fab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2832"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2833"/>
        <source>Set both copper layers clickable</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2834"/>
        <source>Shift+Ctrl+3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2838"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2839"/>
        <source>Set copper top layer clickable</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2840"/>
        <source>Shift+Ctrl+2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2844"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2845"/>
        <source>Set copper bottom layer clickable</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2846"/>
        <source>Shift+Ctrl+1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2859"/>
        <source>Copper Top and Copper Bottom layers are both active</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2871"/>
        <source>Copper Top layer is active</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2883"/>
        <source>Copper Bottom layer is active</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2912"/>
        <source>Order a PCB...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2913"/>
        <source>Order a PCB created from your sketch--from fabulous Fritzing Fab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2928"/>
        <source>Your sketch does not have a board yet!  Please add a PCB in order to use the autorouter.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2933"/>
        <source>Please select the board you want to autoroute. The autorouter can only handle one board at a time.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2938"/>
        <source>Autorouting...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="2943"/>
        <source>Autorouting Progress...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3029"/>
        <source>jumpers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3033"/>
        <source>copperfill</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3037"/>
        <source>vias</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3111"/>
        <source>Remove Bendpoint</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3216"/>
        <source>Your sketch does not have a board yet!  Please add a PCB in order to use ground or copper fill.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3221"/>
        <source>Please select a PCB--copper fill only works for one board at a time.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3226"/>
        <source>Generating %1 fill...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3226"/>
        <source>ground</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3226"/>
        <source>copper</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3250"/>
        <source>Your sketch does not have a board yet!  Please add a PCB in order to remove copper fill.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3255"/>
        <source>Please select a PCB--ground fill operations only work on a one board at a time.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3278"/>
        <source>Remove copper fill</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3341"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3400"/>
        <source>&amp;Wire Color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3572"/>
        <source>Schematic view update</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3573"/>
        <source>There is a new graphics standard for schematic-view part images, beginning with version 0.8.6.

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3574"/>
        <source>Would you like to convert &apos;%1&apos; to the new standard now or open the file read-only?
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3577"/>
        <source>The conversion process will not modify &apos;%1&apos;, until you save the file. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3579"/>
        <source>You will have to rearrange parts and connections in schematic view, as the sizes of most part images will have changed. Consider using the Autorouter to clean up traces. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3581"/>
        <source>Note that any custom parts will not be converted. A tool for converting &apos;rectangular&apos; schematic images is available in the Parts Editor.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3734"/>
        <source>Launch %1...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3815"/>
        <source>No outdated parts found.
All your parts are up-to-date.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3825"/>
        <source>

Note: if you want to update later, there are options under the &apos;Part&apos; menu for dealing with outdated parts individually. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3829"/>
        <source>Outdated parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3834"/>
        <source>

Do you want to update now?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3897"/>
        <source>unable to find replacement for %1.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3953"/>
        <source>Update %1 part(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3958"/>
        <source>Successfully updated %1 part(s).
Please check all views for potential side-effects.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3998"/>
        <source>OK</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4021"/>
        <source>Set the grid size for %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4028"/>
        <source>Grid Size:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4043"/>
        <source>in</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4046"/>
        <source>mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4055"/>
        <source>Restore Default</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4180"/>
        <source>Your sketch does not have a board yet! DRC only works with a PCB.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4186"/>
        <source>Please select a PCB. DRC only works on one board at a time.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4196"/>
        <source>DRC Progress...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4314"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4331"/>
        <source>Your sketch does not have a board yet! Please add a PCB in order to use copper fill operations.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4319"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="4336"/>
        <source>Please select a PCB. Copper fill operations only work on one board at a time.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MazeRouter</name>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="522"/>
        <source>Autorouter was cancelled.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="772"/>
        <source>best so far: %1 of %2 routed</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="774"/>
        <source> with %n vias</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="777"/>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="821"/>
        <source>round %1 of:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="808"/>
        <source>Routing stopped!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="810"/>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="826"/>
        <source>Use best so far...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="817"/>
        <source>Routing complete!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="823"/>
        <source>Routing unsuccessful; stopping at round %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="824"/>
        <source>Routing reached maximum round %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="871"/>
        <source>Preparing undo...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="975"/>
        <source>Unexpected SVG rendering failure--contact fritzing.org</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="2148"/>
        <source>Optimizing traces...</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ModFileDialog</name>
    <message>
        <location filename="../src/version/modfiledialog.ui" line="14"/>
        <source>Modified files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/modfiledialog.ui" line="27"/>
        <source>decision</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/modfiledialog.cpp" line="11"/>
        <source>Fritzing can proceed with the update, but the set of files listed below must first be cleaned (removed or reset). It may take a few minutes. &lt;p&gt;Do you want to proceed with cleaning these files?&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/modfiledialog.cpp" line="15"/>
        <source>Clean files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/modfiledialog.cpp" line="42"/>
        <source>Now cleaning files. Please don&apos;t interrupt the process.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ModelBase</name>
    <message numerus="yes">
        <location filename="../src/model/modelbase.cpp" line="378"/>
        <source>Unable to find the following %n part(s):</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <location filename="../src/model/modelbase.cpp" line="381"/>
        <source>at</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/model/modelbase.cpp" line="454"/>
        <source>File save failed!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/model/modelbase.cpp" line="455"/>
        <source>Couldn&apos;t overwrite file &apos;%1&apos;.
Reason: %2 (errcode %3)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MysteryPart</name>
    <message>
        <location filename="../src/items/mysterypart.cpp" line="210"/>
        <source>label</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/mysterypart.cpp" line="277"/>
        <source>chip label</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>NetLabel</name>
    <message>
        <location filename="../src/items/symbolpaletteitem.cpp" line="520"/>
        <source>net label</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Note</name>
    <message>
        <location filename="../src/items/note.cpp" line="212"/>
        <source>[write your note here]</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PCBSketchWidget</name>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="235"/>
        <source>Create Trace from Ratsnest</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="289"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="294"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1469"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1474"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1509"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1526"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1541"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1564"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1582"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1621"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1626"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1633"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1650"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1673"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1690"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2214"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2219"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2242"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2247"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2421"/>
        <source>Fritzing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="290"/>
        <source>Your sketch does not have a board yet! Please add a PCB in order to use this selection operation.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="295"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2220"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2248"/>
        <source>Please click on a PCB first--this selection operation only works for one board at a time.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="334"/>
        <source>Click this connector to drag out a new trace.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1075"/>
        <source>Change trace layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1470"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1622"/>
        <source>Your sketch does not have a board yet!  Please add a PCB in order to use copper fill.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1475"/>
        <source>%1 Fill: please select the board you want to apply fill to.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1475"/>
        <source>Ground</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1475"/>
        <source>Copper</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1485"/>
        <source>Please designate one or more ground fill seeds before doing a ground fill.

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1509"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1650"/>
        <source>Fritzing error: unable to render board svg (1).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1526"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1541"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1673"/>
        <source>Fritzing error: unable to render copper svg (1).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1564"/>
        <source>Fritzing error: unable to write copper fill (1).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1582"/>
        <source>Fritzing error: unable to write copper fill (2).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1627"/>
        <source>Copper fill: please select only the board you want to fill.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1633"/>
        <source>Unable to create copper fill--probably the part wasn&apos;t dropped onto the PCB.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="1690"/>
        <source>Unable to create copper fill--possibly the part was dropped onto another part or wire rather than the actual PCB.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2076"/>
        <source>Clear ground fill seeds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2215"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2243"/>
        <source>Your sketch does not have a board yet!  Please add a PCB in order to use this selection operation.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2422"/>
        <source>Unable to convert this via to a bendpoint because it is connected to a part that is only on the bottom layer and another part that is only on the top layer.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2681"/>
        <source>Show part silkscreen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2681"/>
        <source>Hide part silkscreen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2695"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2701"/>
        <source>Fritzing Fab Quote</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2696"/>
        <source>Your sketch does not have a board yet. You cannot fabricate this sketch without a PCB part.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2702"/>
        <source>Sorry, http://fab.fritzing.org is not responding to the quote request. Please check your network connection and/or try again later.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2855"/>
        <source>Enter Keepout</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2856"/>
        <source>Keepout is in mils (.001 inches).

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2857"/>
        <source>Note that due to aliasing, distances may be too short by up to 2 mils
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2858"/>
        <source>so you may want to increase the keepout value by that much.

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2859"/>
        <source>10 mils is a good default choice.

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2860"/>
        <source>Enter keepout value:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PEConnectorsView</name>
    <message>
        <location filename="../src/partseditor/peconnectorsview.cpp" line="53"/>
        <source>This is where you edit the connector metadata for the part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/peconnectorsview.cpp" line="59"/>
        <source>number of connectors:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/peconnectorsview.cpp" line="108"/>
        <source>Through-hole</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/peconnectorsview.cpp" line="113"/>
        <source>SMD</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PEMainWindow</name>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="359"/>
        <source>There is one last edit still pending.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="365"/>
        <source>The &apos;family&apos; property can not be blank.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="371"/>
        <source>A duplicate &apos;family&apos; property is not allowed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="375"/>
        <source>A duplicate &apos;variant&apos; property is not allowed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="381"/>
        <source>Close without saving?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="383"/>
        <source>This part can not be saved as-is:

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="390"/>
        <source>Do you want to keep working or close without saving?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="397"/>
        <source>Close without saving</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="398"/>
        <source>Keep working</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="435"/>
        <source>Icon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="472"/>
        <source>Metadata</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="479"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="519"/>
        <source>Connectors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="523"/>
        <source>SVG</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="532"/>
        <source>Inspector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="536"/>
        <source>Layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="546"/>
        <source>Reuse breadboard image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="547"/>
        <source>Reuse the breadboard image in this view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="550"/>
        <source>Reuse schematic image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="551"/>
        <source>Reuse the schematic image in this view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="554"/>
        <source>Reuse PCB image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="555"/>
        <source>Reuse the PCB image in this view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="564"/>
        <source>Load image for view...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="565"/>
        <source>Open a file to use as the image for this view of the part.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="569"/>
        <source>Show in Folder</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="570"/>
        <source>On the desktop, open the folder containing the current svg file.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="575"/>
        <source>Convert schematic to 0.1 inch standard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="576"/>
        <source>Convert pre-0.8.6 schematic image to new 0.1 inch standard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="579"/>
        <source>Remove Internal Connection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="599"/>
        <source>&amp;File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="611"/>
        <source>Save as new part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="612"/>
        <source>Make a copy of the part and save it in the &apos;My Parts&apos; Bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="615"/>
        <source>&amp;Export</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="630"/>
        <source>&amp;Edit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="825"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="863"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="873"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="940"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="947"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2770"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2825"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3031"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3438"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3792"/>
        <source>Parts Editor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="826"/>
        <source>This part has bendable legs. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="827"/>
        <source>This version of the Parts Editor does not yet support editing bendable legs, and the legs may not be displayed correctly in breadboard view . </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="828"/>
        <source>If you make changes to breadboard view, or change connector metadata, the legs may no longer work. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="829"/>
        <source>You can safely make changes to Schematic or PCB view.

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="830"/>
        <source>This warning will not be repeated in this session of Fritzing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="863"/>
        <source>Unable to load &apos;%1&apos;. Please close the parts editor without saving and try again.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="873"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="940"/>
        <source>Unable to write svg to  %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="947"/>
        <source>Unable to parse fzp file  %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="982"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2934"/>
        <source>Fritzing (New) Parts Editor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="987"/>
        <source>Icon View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="988"/>
        <source>Metadata View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="989"/>
        <source>Connectors View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="997"/>
        <source>Show Icon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="998"/>
        <source>Ctrl+4</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="999"/>
        <source>Show the icon view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1002"/>
        <source>Show Metadata</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1003"/>
        <source>Ctrl+5</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1004"/>
        <source>Show the metadata view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1007"/>
        <source>Show Connectors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1008"/>
        <source>Ctrl+6</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1009"/>
        <source>Show the connector metadata in a list view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1012"/>
        <source>Make only this view visible</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1013"/>
        <source>The part will only be visible in this view and icon view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1065"/>
        <source>Blank not allowed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1065"/>
        <source>The value of &apos;%1&apos; can not be blank.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1078"/>
        <source>Change %1 to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1102"/>
        <source>Must be unique</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1102"/>
        <source>Variant &apos;%1&apos; is in use. The variant name must be unique.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1110"/>
        <source>Change description</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1110"/>
        <source>Change %1 to &apos;%2&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1152"/>
        <source>Change tags</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1185"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1190"/>
        <source>Duplicate problem</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1185"/>
        <source>Duplicate &apos;family&apos; property not allowed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1190"/>
        <source>Duplicate &apos;variant&apos; property not allowed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1198"/>
        <source>Change properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1262"/>
        <source>Change connector %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1340"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1619"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1636"/>
        <source>SVG problem</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1341"/>
        <source>This version of the new Parts Editor can not deal with separate copper0 and copper1 layers in &apos;%1&apos;. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1342"/>
        <source>So editing may produce an invalid PCB view image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1519"/>
        <source>Image &amp; Footprint Files (%1 %2 %3 %4 %5);;SVG Files (%1);;JPEG Files (%2);;PNG Files (%3);;gEDA Footprint Files (%4);;Kicad Module Files (%5)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1524"/>
        <source>Image Files (%1 %2 %3);;SVG Files (%1);;JPEG Files (%2);;PNG Files (%3)%4%5</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1541"/>
        <source>Open Image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1556"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1563"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1603"/>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1609"/>
        <source>Conversion problem</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1556"/>
        <source>Unable to load &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1564"/>
        <source>The SVG file &apos;%1&apos; appears to have been exported from CorelDRAW without the &apos;presentation attributes&apos; setting. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1565"/>
        <source>Please re-export the SVG file using that setting, and try loading again.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1582"/>
        <source>Fonts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1583"/>
        <source>Fritzing currently only supports OCRA and Droid fonts--these have been substituted in for the fonts in &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1590"/>
        <source>You may use a PNG or JPG image to construct your part, but it is better to use an SVG. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1591"/>
        <source>PNG and JPG images retain their nature as bitmaps and do not look good when scaled--</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1592"/>
        <source>so for Fritzing parts it is best to use PNG and JPG only as placeholders.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1595"/>
        <source>Use of PNG and JPG discouraged</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1603"/>
        <source>Unable to load image file &apos;%1&apos;:

%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1609"/>
        <source>Unable to load image file &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1619"/>
        <source>Unable to parse &apos;%1&apos;: %2 line:%3 column:%4</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1630"/>
        <source>There are no copper layers defined in: %1. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1631"/>
        <source>See &lt;a href=&quot;http://fritzing.org/learning/tutorials/creating-custom-parts/providing-part-graphics/&quot;&gt;this explanation&lt;/a&gt;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1632"/>
        <source>&lt;br/&gt;&lt;br/&gt;This will not be a problem in the next release of the Parts Editor, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1633"/>
        <source>but for now please modify the file according to the instructions in the link.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1646"/>
        <source>Copy problem</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1646"/>
        <source>Unable to make a local copy of: &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1668"/>
        <source>no schematics found in %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1673"/>
        <source>schematic part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="1694"/>
        <source>no footprints found in %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2028"/>
        <source>Relocate connector %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2136"/>
        <source>Filename prefix</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2137"/>
        <source>&lt;p&gt;Please enter a prefix to help you identify the part files.&lt;br/&gt;The file names will have the form &apos;PREFIX_%1&apos;.&lt;br/&gt;(It is not necessary to change the proposed prefix, since a unique suffix is always added.)&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2168"/>
        <source>Sketch Change Warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2171"/>
        <source>The open sketch &apos;%1&apos; uses the part you are editing. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2172"/>
        <source>Saving this part will make a change to the sketch that cannot be undone.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2175"/>
        <source>The open sketches </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2177"/>
        <source>&apos;%1&apos;, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2179"/>
        <source>and &apos;%1&apos; </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2180"/>
        <source>Saving this part will make a change to these sketches that cannot be undone.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2183"/>
        <source>

Go ahead and save?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2190"/>
        <source>Save</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2191"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2442"/>
        <source>Move terminal point</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2708"/>
        <source>Remove connector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2711"/>
        <source>Remove %1 connectors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2729"/>
        <source>Save &quot;%1&quot;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2730"/>
        <source>Do you want to save the changes you made in the part &quot;%1&quot;?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2731"/>
        <source>Your changes will be lost if you don&apos;t save them.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2735"/>
        <source>untitled part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2770"/>
        <source>Unable to load fzp from %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2825"/>
        <source>Unable to create new connector--you may have to start over.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2858"/>
        <source>Add connector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="2861"/>
        <source>Add %1 connectors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3031"/>
        <source>Internal connections are very messed up.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3050"/>
        <source>Remove internal connection from &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3096"/>
        <source>Add internal connection from &apos;%1&apos; to &apos;%2&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3395"/>
        <source>Change all connectors to %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3438"/>
        <source>Unable to parse &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3489"/>
        <source>Change to %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3730"/>
        <source>Make only %1 view visible</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <location filename="../src/partseditor/pemainwindow.cpp" line="3793"/>
        <source>This part has %n unassigned connectors </source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <location filename="../src/partseditor/pemainwindow.cpp" line="3794"/>
        <source>across %n views. </source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3795"/>
        <source>Until all connectors are assigned to SVG elements, the part will not work correctly. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="3796"/>
        <source>Exiting the Parts Editor now is fine, as long as you remember to finish the assignments later.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PEMetadataView</name>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="193"/>
        <source>This is where you edit the metadata for the part ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="204"/>
        <source>Set the part&apos;s title</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="205"/>
        <source>Title</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="211"/>
        <source>Set the part&apos;s date</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="213"/>
        <source>Date</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="219"/>
        <source>Set the part&apos;s author</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="220"/>
        <source>Author</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="227"/>
        <source>Set the part&apos;s description--you can use simple html (as defined by Qt&apos;s Rich Text)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="228"/>
        <source>Description</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="234"/>
        <source>Set the default part label prefix</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="235"/>
        <source>Label</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="241"/>
        <source>Set the part&apos;s url if it is described on a web page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="242"/>
        <source>URL</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="248"/>
        <source>Set the part&apos;s family--what other parts is this part related to</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="249"/>
        <source>Family</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="255"/>
        <source>Set the part&apos;s variant--this makes it unique from all other parts in the same family</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="256"/>
        <source>Variant</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="260"/>
        <source>Set the part&apos;s properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="262"/>
        <source>Properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="266"/>
        <source>Set the part&apos;s tags</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemetadataview.cpp" line="268"/>
        <source>Tags</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PESvgView</name>
    <message>
        <location filename="../src/partseditor/pesvgview.cpp" line="64"/>
        <source>width:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pesvgview.cpp" line="70"/>
        <source>height:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PEToolView</name>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="85"/>
        <source>Connector List (a checkmark means the graphic was selected)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="94"/>
        <source>Set Internal Connections</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="96"/>
        <source>Set this checkbox to edit internal connections by drawing wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="110"/>
        <source>Controls for setting the terminal point for a connector. The terminal point is where a wire will attach to the connector. You can also drag the crosshair of the current connector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="119"/>
        <source>Center</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="119"/>
        <source>W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="119"/>
        <source>N</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="119"/>
        <source>S</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="119"/>
        <source>E</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="121"/>
        <source>center</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="121"/>
        <source>west</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="121"/>
        <source>north</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="121"/>
        <source>south</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="121"/>
        <source>east</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="125"/>
        <source>Sets the connector&apos;s terminal point to %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="144"/>
        <source>Modifies the x-coordinate of the terminal point</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="156"/>
        <source>Modifies the y-coordinate of the terminal point</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="167"/>
        <source>Dragging disabled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="213"/>
        <source>&lt;font color=&apos;black&apos;&gt;Dragging enabled&lt;/font&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="217"/>
        <source>&lt;font color=&apos;gray&apos;&gt;Dragging disabled&lt;/font&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="308"/>
        <source>Connector %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="441"/>
        <source>Select graphic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/petoolview.cpp" line="444"/>
        <source>Use the cursor location and mouse wheel to navigate to the SVG element which you want to assign to the current connector, then mouse down to select it.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Pad</name>
    <message>
        <location filename="../src/items/pad.cpp" line="207"/>
        <source>shape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/pad.cpp" line="217"/>
        <source>center</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/pad.cpp" line="218"/>
        <source>north</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/pad.cpp" line="219"/>
        <source>east</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/pad.cpp" line="220"/>
        <source>south</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/pad.cpp" line="221"/>
        <source>west</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/pad.cpp" line="233"/>
        <location filename="../src/items/pad.cpp" line="336"/>
        <source>connect to</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PaletteItem</name>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="522"/>
        <source>Edit Pin Labels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="596"/>
        <location filename="../src/items/paletteitem.cpp" line="607"/>
        <location filename="../src/items/paletteitem.cpp" line="631"/>
        <source>Fritzing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="597"/>
        <source>Unable to proceed; unable to find top level view.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="608"/>
        <source>Unable to proceed; part connectors do no have standard IDs.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="632"/>
        <source>Label mismatch.  Nothing was saved.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="790"/>
        <source>hole size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="930"/>
        <source>advanced settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="941"/>
        <source>in</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="945"/>
        <source>mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="963"/>
        <source>Hole Diameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="976"/>
        <source>Ring Thickness</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PartLabel</name>
    <message>
        <location filename="../src/items/partlabel.cpp" line="406"/>
        <source>Edit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="408"/>
        <source>Edit label text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="410"/>
        <source>Hide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="412"/>
        <source>Hide part label</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="416"/>
        <source>Display Values</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="417"/>
        <source>Flip/Rotate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="418"/>
        <source>Font Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="423"/>
        <source>Rotate 45° Clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="425"/>
        <source>Rotate the label by 45 degrees clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="428"/>
        <source>Rotate 90° Clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="430"/>
        <source>Rotate the label by 90 degrees clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="433"/>
        <source>Rotate 135° Clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="435"/>
        <source>Rotate the label by 135 degrees clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="438"/>
        <source>Rotate 180°</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="440"/>
        <source>Rotate the label by 180 degrees</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="443"/>
        <source>Rotate 135° Counter Clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="445"/>
        <source>Rotate the label by 135 degrees counter clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="448"/>
        <source>Rotate 90° Counter Clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="450"/>
        <source>Rotate current selection 90 degrees counter clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="453"/>
        <source>Rotate 45° Counter Clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="455"/>
        <source>Rotate the label by 45 degrees counter clockwise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="458"/>
        <source>Flip Horizontal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="460"/>
        <source>Flip label horizontally</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="462"/>
        <source>Flip Vertical</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="464"/>
        <source>Flip label vertically</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="466"/>
        <source>Tiny</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="468"/>
        <source>Set font size to tiny</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="472"/>
        <source>Small</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="474"/>
        <source>Set font size to small</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="478"/>
        <source>Medium</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="480"/>
        <source>Set font size to medium</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="484"/>
        <source>Large</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="486"/>
        <source>Set font size to large</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="490"/>
        <source>Label text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="494"/>
        <source>Display the text of the label</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="505"/>
        <source>Display the value of property %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="704"/>
        <source>Set label for %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/partlabel.cpp" line="705"/>
        <source>Label text:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PartsBinPaletteWidget</name>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="120"/>
        <source>Untitled Bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="408"/>
        <source>Specify a file name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="412"/>
        <source>Fritzing Bin (*%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="453"/>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="460"/>
        <source>Fritzing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="454"/>
        <source>Cannot find file %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="461"/>
        <source>Cannot read file %1:
%2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="510"/>
        <source>Loading...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="513"/>
        <source>loading bin &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="580"/>
        <source>Save bin &quot;%1&quot;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="581"/>
        <source>Do you want to save the changes you made in the bin &quot;%1&quot;?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="582"/>
        <source>Your changes will be lost if you don&apos;t save them.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="587"/>
        <source>Save</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="588"/>
        <source>Don&apos;t Save</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="589"/>
        <source>Ctrl+D</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="590"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="693"/>
        <source>Add to bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="694"/>
        <source>Do you really want to add the selected part to the bin?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="879"/>
        <source>Change icon color...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="880"/>
        <source>Change the color of the icon for this bin.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="891"/>
        <source>Select a color for this icon</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Perfboard</name>
    <message>
        <location filename="../src/items/perfboard.cpp" line="184"/>
        <source>size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/perfboard.cpp" line="247"/>
        <source>set board size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/perfboard.cpp" line="290"/>
        <source>Performance Warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/perfboard.cpp" line="291"/>
        <source>Performance of perfboards and stripboards with more than approximately 2000 holes can be slow. Are you sure ?

Note: this warning will not be repeated during this session.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/perfboard.cpp" line="298"/>
        <source>Set new size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/perfboard.cpp" line="299"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/perfboard.cpp" line="386"/>
        <source>rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/perfboard.cpp" line="390"/>
        <source>columns</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PinLabelDialog</name>
    <message>
        <location filename="../src/dialogs/pinlabeldialog.cpp" line="81"/>
        <source>&lt;p&gt;&lt;h2&gt;Pin Label Editor&lt;/h2&gt;&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/pinlabeldialog.cpp" line="82"/>
        <source>&lt;p&gt;Click on a label next to a pin number to rename that pin.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/pinlabeldialog.cpp" line="83"/>
        <source>You can use the tab key to move through the labels in order.&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/pinlabeldialog.cpp" line="102"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/pinlabeldialog.cpp" line="106"/>
        <source>Save</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/pinlabeldialog.cpp" line="110"/>
        <source>Undo</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/pinlabeldialog.cpp" line="114"/>
        <source>Redo</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PlatformArduino</name>
    <message>
        <location filename="../src/program/platformarduino.cpp" line="84"/>
        <source>Running %1 %2</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PlatformPicaxe</name>
    <message>
        <location filename="../src/program/platformpicaxe.cpp" line="65"/>
        <source>Running %1 %2</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PrefsDialog</name>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="79"/>
        <source>General</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="83"/>
        <source>Code View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="98"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="99"/>
        <source>OK</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="163"/>
        <source>Mouse Wheel Behavior</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="185"/>
        <source>Change Wheel Behavior</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="195"/>
        <source>Autosave</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="200"/>
        <source>Autosave every:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="212"/>
        <source>minutes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="228"/>
        <source>Language</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="252"/>
        <source>Colors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="267"/>
        <location filename="../src/dialogs/prefsdialog.cpp" line="287"/>
        <source>%1 (click to change...)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="303"/>
        <source>Clear Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="345"/>
        <source>Platform Support</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="352"/>
        <source>&lt;b&gt;%1&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="361"/>
        <source>Location:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="370"/>
        <source>...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="380"/>
        <source>You need to have &lt;a href=&apos;%1&apos;&gt;%2&lt;/a&gt; (version %3 or newer) installed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="409"/>
        <source>Select a programmer (executable) for %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="441"/>
        <source>Connected Highlight</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="457"/>
        <source>Unconnected Highlight</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="489"/>
        <source>Command</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="491"/>
        <source>Control</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="497"/>
        <source>no keys down = scroll
shift key swaps scroll axis
Alt or %1 key = zoom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="500"/>
        <source>no keys down = zoom
Alt or %1 key = scroll
shift key swaps scroll axis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="520"/>
        <source>Curvy vs. straight wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="523"/>
        <source>When you mouse-down and drag on a wire or the leg of a part (as opposed to a connector or a bendpoint) do you want to change the curvature of the wire (or leg) or drag out a new bendpoint?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="528"/>
        <source>This checkbox sets the default behavior. You can switch back to the non-default behavior by holding down the Control key (Mac: Command key) when you drag.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="535"/>
        <source>Curvy wires and legs</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ProgramTab</name>
    <message>
        <location filename="../src/program/programtab.cpp" line="119"/>
        <source>While it is possible to read and edit %1 programming files, it is not yet possible to use Fritzing to compile or upload these programs to a microcontroller.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="241"/>
        <source>New</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="253"/>
        <source>Save</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="247"/>
        <source>Open</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="266"/>
        <source>Platform</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="290"/>
        <source>Board</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="308"/>
        <source>Port</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="329"/>
        <source>Serial Monitor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="335"/>
        <source>Upload</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="450"/>
        <source>Select a program file to load</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="477"/>
        <source>Fritzing is unable to find &apos;%1&apos;, please locate it</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="479"/>
        <source>Code (*.%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="598"/>
        <source>Remove &quot;%1&quot;?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="599"/>
        <source>Are you sure you want to remove &quot;%1&quot; from the sketch?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="727"/>
        <source>No uploader for %1 specified. Go to Preferences &gt; Code View to configure it.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="731"/>
        <source>Uploader configured, but not found at %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="756"/>
        <source>Upload finished.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programtab.cpp" line="758"/>
        <source>Upload failed with exit code %1, %2</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ProgramWindow</name>
    <message>
        <location filename="../src/program/programwindow.cpp" line="728"/>
        <source>No boards available</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="175"/>
        <source>&amp;Edit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="177"/>
        <source>Undo</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="183"/>
        <source>Redo</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="191"/>
        <source>&amp;Cut</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="193"/>
        <source>Cut selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="198"/>
        <source>&amp;Copy</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="200"/>
        <source>Copy selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="205"/>
        <source>&amp;Paste</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="207"/>
        <source>Paste clipboard contents</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="214"/>
        <source>&amp;Select All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="216"/>
        <source>Select all text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="222"/>
        <source>&amp;Preferences...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="223"/>
        <source>Show the application&apos;s about box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="227"/>
        <source>&amp;Code</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="229"/>
        <source>&amp;New Tab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="231"/>
        <source>Create a new program tab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="235"/>
        <source>&amp;Import Code...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="236"/>
        <source>Alt+Ctrl+I</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="237"/>
        <source>Import a program from a file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="241"/>
        <source>&amp;Save Tab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="242"/>
        <source>Alt+Ctrl+S</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="243"/>
        <source>Save the current program tab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="247"/>
        <source>&amp;Rename Tab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="248"/>
        <source>Alt+Ctrl+R</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="249"/>
        <source>Rename the current program tab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="253"/>
        <source>Close Tab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="254"/>
        <source>Alt+Ctrl+W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="255"/>
        <source>Remove the current program tab from the sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="261"/>
        <source>Platform</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="276"/>
        <source>Board</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="281"/>
        <source>Port</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="290"/>
        <source>Serial Monitor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="291"/>
        <source>Ctrl+M</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="292"/>
        <source>Monitor the serial port communication</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="297"/>
        <source>Upload</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="298"/>
        <source>Ctrl+U</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="299"/>
        <source>Upload the current program onto a microcontroller</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="473"/>
        <source>Code Window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="477"/>
        <source>Code Window - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="486"/>
        <source>%1%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="304"/>
        <source>&amp;View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="355"/>
        <source>File &apos;%1&apos; was restored from the .fzz file; the local copy was not found.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/programwindow.cpp" line="358"/>
        <source>File &apos;%1&apos; was restored from the .fzz file; save a local copy to work with an external editor.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <location filename="../src/autoroute/autoroutersettingsdialog.cpp" line="64"/>
        <source>Autorouter Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/drc.cpp" line="108"/>
        <source>Part %1 &apos;%2&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="615"/>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="658"/>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="728"/>
        <location filename="../src/autoroute/panelizer.cpp" line="484"/>
        <location filename="../src/autoroute/panelizer.cpp" line="1363"/>
        <location filename="../src/autoroute/panelizer.cpp" line="1391"/>
        <location filename="../src/fapplication.cpp" line="1017"/>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="44"/>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="136"/>
        <location filename="../src/model/modelbase.cpp" line="74"/>
        <location filename="../src/model/modelbase.cpp" line="87"/>
        <location filename="../src/model/modelbase.cpp" line="98"/>
        <location filename="../src/model/modelbase.cpp" line="105"/>
        <location filename="../src/model/modelbase.cpp" line="180"/>
        <location filename="../src/model/modelbase.cpp" line="384"/>
        <location filename="../src/model/modelbase.cpp" line="437"/>
        <location filename="../src/model/palettemodel.cpp" line="86"/>
        <location filename="../src/model/palettemodel.cpp" line="194"/>
        <location filename="../src/model/palettemodel.cpp" line="213"/>
        <location filename="../src/model/palettemodel.cpp" line="335"/>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="528"/>
        <location filename="../src/sketch/sketchwidget.cpp" line="902"/>
        <location filename="../src/svg/gerbergenerator.cpp" line="359"/>
        <source>Fritzing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="615"/>
        <source>Cannot autoroute: no board (or multiple boards) found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="657"/>
        <source>No connections (on the PCB) to route.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/mazerouter/mazerouter.cpp" line="657"/>
        <source>No connections to route.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/panelizer.cpp" line="1363"/>
        <source>unable to copy file &apos;%1&apos; to &apos;%2&apos;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/autoroute/panelizer.cpp" line="1389"/>
        <source>%2 ... %1 wires moved from their saved position</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="1017"/>
        <source>%1 wires moved from their saved position in %2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="2057"/>
        <source>Regenerate database failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/commands.cpp" line="2046"/>
        <source>Set Ground Fill Seed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/groundfillseeddialog.cpp" line="40"/>
        <source>Ground Fill Seed Editor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/pinlabeldialog.cpp" line="65"/>
        <source>Pin Label Editor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="50"/>
        <source>Preferences</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="242"/>
        <source>Please note that a new language setting will not take effect until the next time you run Fritzing.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="261"/>
        <source>Connected highlight color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="281"/>
        <source>Unconnected highlight color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="311"/>
        <source>Clear all saved settings and close this dialog immediately.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="319"/>
        <source>This action does not delete any files; it restores settings to their default values.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="327"/>
        <source>There is no undo for this action, and no further warning!!!!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/prefsdialog.cpp" line="335"/>
        <source>Clear Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/note.cpp" line="152"/>
        <source>Edit link</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="59"/>
        <source>mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/paletteitem.cpp" line="60"/>
        <source>in</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/fritzingwindow.cpp" line="137"/>
        <source>The file &apos;%1&apos; is read-only; please use a different filename.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3310"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3316"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3324"/>
        <source>Part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3337"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3370"/>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3396"/>
        <source>Wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow_menu.cpp" line="3990"/>
        <source>Set Grid Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/model/modelbase.cpp" line="75"/>
        <location filename="../src/model/palettemodel.cpp" line="195"/>
        <source>Cannot read file %1:
%2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/model/modelbase.cpp" line="88"/>
        <source>Parse error (1) at line %1, column %2:
%3
%4</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/model/modelbase.cpp" line="98"/>
        <source>The file %1 is not a Fritzing file (2).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/model/modelbase.cpp" line="105"/>
        <source>The file %1 is not a Fritzing file (4).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/model/modelbase.cpp" line="180"/>
        <source>The file %1 is not a Fritzing file (3).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/model/modelbase.cpp" line="438"/>
        <source>Cannot write file temp:
%1
%2
%3.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/model/palettemodel.cpp" line="87"/>
        <source>No parts found.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/model/palettemodel.cpp" line="214"/>
        <source>Parse error (2) at line %1, column %2:
%3
%4</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/model/palettemodel.cpp" line="336"/>
        <source>The part &apos;%1&apos; at &apos;%2&apos; does not have a unique module id &apos;%3&apos;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinpalettewidget.cpp" line="528"/>
        <source>Fritzing cannot load the parts bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="40"/>
        <source>Basic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="41"/>
        <source>Input</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="42"/>
        <source>Output</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="43"/>
        <source>ICs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="44"/>
        <source>Power</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="45"/>
        <source>Connection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="46"/>
        <source>Microcontroller</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="47"/>
        <location filename="../src/sketch/breadboardsketchwidget.cpp" line="38"/>
        <source>Breadboard View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="48"/>
        <location filename="../src/sketch/schematicsketchwidget.cpp" line="58"/>
        <source>Schematic View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="49"/>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="126"/>
        <source>PCB View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="50"/>
        <source>Tools</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="51"/>
        <source>Shields</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="52"/>
        <source>LilyPad</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="53"/>
        <source>Other</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="54"/>
        <source>Sensors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="214"/>
        <source>Part already in bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partsbinpalette/partsbinview.cpp" line="214"/>
        <source>The part that you have just added,
is already there, we won&apos;t add it again, right?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/hashpopulatewidget.cpp" line="169"/>
        <source>a label</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/hashpopulatewidget.cpp" line="173"/>
        <source>a value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/kicadmoduledialog.cpp" line="36"/>
        <source>Select %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/peconnectorsview.cpp" line="75"/>
        <source>Set all to:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/peconnectorsview.cpp" line="94"/>
        <location filename="../src/partseditor/peutils.cpp" line="171"/>
        <source>Pad</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="279"/>
        <source>ii</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="280"/>
        <source>Icon View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/pemainwindow.cpp" line="696"/>
        <source>Internal Connections</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/peutils.cpp" line="86"/>
        <source>&lt;b&gt;Name:&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/peutils.cpp" line="94"/>
        <source>Set the connectors&apos;s title</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/peutils.cpp" line="138"/>
        <source>&lt;b&gt;id:&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/peutils.cpp" line="149"/>
        <source>&lt;b&gt;type:&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/peutils.cpp" line="115"/>
        <source>&lt;b&gt;Description:&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/partseditor/peutils.cpp" line="124"/>
        <source>Set the connectors&apos;s description</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/syntaxer.cpp" line="86"/>
        <source>files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/referencemodel/sqlitereferencemodel.cpp" line="91"/>
        <location filename="../src/referencemodel/sqlitereferencemodel.cpp" line="143"/>
        <location filename="../src/referencemodel/sqlitereferencemodel.cpp" line="160"/>
        <source>Oops!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/referencemodel/sqlitereferencemodel.cpp" line="92"/>
        <source>Sorry, we have a problem with the swapping mechanism.
Fritzing still works, but you won&apos;t be able to change parts properties.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/referencemodel/sqlitereferencemodel.cpp" line="93"/>
        <source>Error %1
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/breadboardsketchwidget.cpp" line="37"/>
        <source>bb</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="127"/>
        <source>pcb</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="273"/>
        <source>Select all &apos;Don&apos;t autoroute&apos; traces</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="278"/>
        <source>Select all autorouteable traces</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2233"/>
        <location filename="../src/sketch/sketchwidget.cpp" line="7869"/>
        <source>Select all %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2298"/>
        <source>Convert to Via</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/pcbsketchwidget.cpp" line="2429"/>
        <source>Convert Via to Bendpoint</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/schematicsketchwidget.cpp" line="57"/>
        <source>schem</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="903"/>
        <source>Error reading file %1: %2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3578"/>
        <source>%1 %2,%3 %4</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3607"/>
        <source>Change leg of %1,%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3765"/>
        <source>%1 %2 %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="4033"/>
        <source>%1 Layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="4257"/>
        <location filename="../src/sketch/sketchwidget.cpp" line="4274"/>
        <source>Bring forward</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="4266"/>
        <source>Send backward</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="4283"/>
        <source>Bring to front</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="5549"/>
        <source>Split Wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="5610"/>
        <source>Join Wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7864"/>
        <source>Trace wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7867"/>
        <source>Ratsnest wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="8144"/>
        <source>Select outdated parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="8159"/>
        <source>Select locked parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gedaelement2svg.cpp" line="51"/>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="97"/>
        <location filename="../src/svg/kicadschematic2svg.cpp" line="72"/>
        <source>unable to open %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gedaelement2svg.cpp" line="63"/>
        <source>unable to parse %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gedaelement2svg.cpp" line="142"/>
        <source>parse failure in %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gedaelement2svg.cpp" line="147"/>
        <source>Sorry, Fritzing can&apos;t yet handle both pins and pads together (in %1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gedaelement2svg.cpp" line="228"/>
        <source>bad pin argument count</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gedaelement2svg.cpp" line="303"/>
        <source>bad pad argument count</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gedaelement2svg.cpp" line="535"/>
        <source>Unable to parse copper: %1 %2 %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="128"/>
        <source>outline is empty</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="149"/>
        <source>the board outline layer, </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="150"/>
        <source>silkscreen layer(s), </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="151"/>
        <source>copper layer(s), </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="152"/>
        <source>mask layer(s), </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="153"/>
        <source>paste mask layer(s), </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="155"/>
        <source>Unable to translate svg curves in %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="165"/>
        <source>%1 layer export is empty.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="183"/>
        <source>%1 layer export is empty (case 2).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="198"/>
        <source>silk layer %1 export is empty</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="214"/>
        <source>silk export failure</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="236"/>
        <source>exported drill file is empty</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="253"/>
        <source>drill export failure</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="271"/>
        <source>exported mask layer %1 is empty</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="277"/>
        <source>%1 mask export failure (2)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="285"/>
        <location filename="../src/svg/gerbergenerator.cpp" line="319"/>
        <source>mask export failure</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="308"/>
        <source>exported paste mask layer is empty</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="344"/>
        <source>%1 layer: unable to save to &apos;%2&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="851"/>
        <source>Fritzing is unable to process the cutouts in this custom PCB shape. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="852"/>
        <source>You may need to reload the shape SVG. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="853"/>
        <source>Fritzing requires that you make cutouts using a shape &apos;subtraction&apos; or &apos;difference&apos; operation in your vector graphics editor.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/gerbergenerator.cpp" line="908"/>
        <source>Unable to save pick and place file: %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="120"/>
        <source>footprint %1 not found in %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="128"/>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="155"/>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="196"/>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="231"/>
        <source>unexpected end of file in footprint %1 in file %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="149"/>
        <source>unexpected format (1) in %1 from %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="249"/>
        <source>Sorry, Fritzing can&apos;t yet handle both pins and pads together (in %1 in %2)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="410"/>
        <source>unexpected end of file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="440"/>
        <source>pad missing drill</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="443"/>
        <source>pad missing attributes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="446"/>
        <source>pad missing position</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="449"/>
        <source>pad missing shape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="454"/>
        <source>position missing params</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="462"/>
        <source>drill missing params</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="471"/>
        <source>drill offset not implemented</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="477"/>
        <source>drill missing ellipse params</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="485"/>
        <source>attributes missing params</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="491"/>
        <source>bad layer mask parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="518"/>
        <source>Sorry, can&apos;t handle pad type %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="523"/>
        <source>pad shape missing params</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="545"/>
        <source>pad shape size is invalid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="553"/>
        <source>trapezoidal pads not implemented</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="559"/>
        <source>shape delta not implemented</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="564"/>
        <source>non-circular holes not implemented</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="568"/>
        <source>non-copper holes not implemented</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadmodule2svg.cpp" line="589"/>
        <source>unable to handle pad shape %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadschematic2svg.cpp" line="94"/>
        <source>bad schematic definition %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadschematic2svg.cpp" line="106"/>
        <source>schematic part %1 not found in %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadschematic2svg.cpp" line="114"/>
        <location filename="../src/svg/kicadschematic2svg.cpp" line="141"/>
        <source>schematic %1 unexpectedly ends (1) in %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadschematic2svg.cpp" line="118"/>
        <location filename="../src/svg/kicadschematic2svg.cpp" line="150"/>
        <source>schematic %1 unexpectedly ends (2) in %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/kicadschematic2svg.cpp" line="158"/>
        <source>schematic %1 unexpectedly ends (3) in %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/x2svg.cpp" line="68"/>
        <source>failure in svg conversion 1: %1 %2 %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/svg/x2svg.cpp" line="73"/>
        <source>failure in svg conversion 2: %1 %2 %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/utils/fileprogressdialog.cpp" line="68"/>
        <source>File Progress...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/utils/folderutils.cpp" line="355"/>
        <source>Copying file %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/utils/folderutils.cpp" line="365"/>
        <source>File %1 already exists: it won&apos;t be overwritten</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="50"/>
        <source>Check for updates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="119"/>
        <source>Icon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="120"/>
        <source>Breadboard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="121"/>
        <location filename="../src/viewlayer.cpp" line="129"/>
        <source>Parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="122"/>
        <location filename="../src/viewlayer.cpp" line="132"/>
        <source>Wires</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="123"/>
        <location filename="../src/viewlayer.cpp" line="133"/>
        <source>Part Labels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="124"/>
        <location filename="../src/viewlayer.cpp" line="131"/>
        <location filename="../src/viewlayer.cpp" line="146"/>
        <source>Ratsnest</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="125"/>
        <location filename="../src/viewlayer.cpp" line="134"/>
        <location filename="../src/viewlayer.cpp" line="153"/>
        <source>Notes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="126"/>
        <location filename="../src/viewlayer.cpp" line="135"/>
        <location filename="../src/viewlayer.cpp" line="154"/>
        <source>Rulers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="128"/>
        <source>Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="130"/>
        <source>Text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="137"/>
        <source>Board</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="138"/>
        <source>Silkscreen Top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="139"/>
        <source>Silkscreen Top (Part Labels)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="140"/>
        <source>Copper Fill Bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="141"/>
        <source>Copper Bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="142"/>
        <source>Copper Bottom Trace</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="143"/>
        <source>Copper Fill Top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="144"/>
        <source>Copper Top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="145"/>
        <source>Copper Top Trace</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="147"/>
        <source>Silkscreen Bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="148"/>
        <source>Silkscreen Bottom (Part Labels)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="152"/>
        <source>Part Image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="160"/>
        <source>Unknown Layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="177"/>
        <source>icon view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="178"/>
        <source>breadboard view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="179"/>
        <source>schematic view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/viewlayer.cpp" line="180"/>
        <source>pcb view</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/program/consolesettings.cpp" line="149"/>
        <source>N/A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="74"/>
        <source>The parts folder &apos;%1&apos; has been changed--it is not in the master branch (%2). %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="75"/>
        <source>The parts folder &apos;%1&apos; may have been damaged (%2). %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="76"/>
        <source>The parts folder &apos;%1&apos; has been changed (%2). %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="77"/>
        <source>There are new or modified files in the parts folder &apos;%1&apos;. These changes will be discarded by the update.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="78"/>
        <source>There are unreadable files in the parts folder &apos;%1&apos;. %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="97"/>
        <source>Unable to open parts folder &apos;%1&apos; for update. %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="103"/>
        <source>Parts folder repo &apos;%1&apos; is empty. %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="111"/>
        <source>Unable to determine network site for &apos;%1&apos;. %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="127"/>
        <source>Unable to access network site for &apos;%1&apos;. %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="137"/>
        <source>Unable to retrieve network references for &apos;%1&apos;. %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="163"/>
        <source>Unable to retrieve master network reference for &apos;%1&apos;. %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="430"/>
        <location filename="../src/version/partschecker.cpp" line="438"/>
        <source>Regenerating parts database</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="430"/>
        <source>Unable to find parts git repository</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/partschecker.cpp" line="438"/>
        <source>Unable to find parts git repository HEAD</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QShortcut</name>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="619"/>
        <source>Ctrl</source>
        <comment>for naming shortcut keys on menu items</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="620"/>
        <source>Alt</source>
        <comment>for naming shortcut keys on menu items</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="621"/>
        <source>Shift</source>
        <comment>for naming shortcut keys on menu items</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/mainwindow/mainwindow.cpp" line="622"/>
        <source>Meta</source>
        <comment>for naming shortcut keys on menu items</comment>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QuoteDialog</name>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="172"/>
        <source>Order your PCB from Fritzing Fab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="195"/>
        <source>Copies</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="268"/>
        <source> %1 cm%3 (%2 in%3).&lt;br /&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="273"/>
        <source>Use Fritzing Fab to produce a PCB from your sketch.&lt;br /&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="274"/>
        <source>Take advantage of our quantity discount:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="219"/>
        <source>Visit Fritzing Fab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="206"/>
        <source>&lt;b&gt;Shipping is free wordlwide&lt;/b&gt;.&lt;br /&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="207"/>
        <source>Documents for local customs control are included.&lt;br /&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="208"/>
        <source>Some countries might charge additional import taxes or checking fees.&lt;br /&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="209"/>
        <source>For more information on pricing see &lt;a href=&apos;https://fab.fritzing.org/pricing&apos;&gt;https://fab.fritzing.org/pricing&lt;/a&gt;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <location filename="../src/dialogs/quotedialog.cpp" line="267"/>
        <source>The total area of the %n PCB(s) in this sketch is</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="168"/>
        <source>Fritzing Fab Quote</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="195"/>
        <source>Price per board</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/quotedialog.cpp" line="195"/>
        <source>Price</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RecoveryDialog</name>
    <message>
        <location filename="../src/dialogs/recoverydialog.cpp" line="59"/>
        <source>File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/recoverydialog.cpp" line="59"/>
        <source>Last backup</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/recoverydialog.cpp" line="59"/>
        <source>Last saved</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/recoverydialog.cpp" line="84"/>
        <source>file not saved</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/recoverydialog.cpp" line="97"/>
        <source>&lt;p&gt;&lt;b&gt;Fritzing may have crashed, but some of the changes to the following files may be recovered.&lt;/b&gt;&lt;/p&gt;&lt;p&gt;The date and time each file was backed-up is displayed. If the file was saved, that date and time is also listed for comparison.&lt;/p&gt;&lt;p&gt;The original files are still on your disk, if they were ever saved. You can choose whether to overwrite the original file after you load its recovery file.&lt;/p&gt;&lt;p&gt;&lt;b&gt;Select any files you want to recover from the list below.&lt;/b&gt;&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/recoverydialog.cpp" line="111"/>
        <source>&amp;Recover</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/recoverydialog.cpp" line="117"/>
        <source>&amp;Ignore</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RegenerateDatabaseThread</name>
    <message>
        <location filename="../src/fapplication.cpp" line="312"/>
        <source>Unable to open temporary file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="318"/>
        <source>Database failure</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="325"/>
        <source>Unable to remove original db file %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/fapplication.cpp" line="332"/>
        <source>Unable to copy database file %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Resistor</name>
    <message>
        <location filename="../src/items/resistor.cpp" line="126"/>
        <source>Resistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resistor.cpp" line="253"/>
        <source>resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resistor.cpp" line="270"/>
        <source>You can either type in a resistance value, or select one from the drop down. Format nnn.dP where P is one of &apos;umkMG&apos;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ResizableBoard</name>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="999"/>
        <source>shape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1015"/>
        <source>width: %1mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1020"/>
        <source>height: %1mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1278"/>
        <source>width(mm)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1291"/>
        <source>height(mm)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1330"/>
        <source>keep aspect ratio</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1344"/>
        <source>Revert</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1358"/>
        <source>size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1366"/>
        <location filename="../src/items/resizableboard.cpp" line="1477"/>
        <source>custom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1487"/>
        <source>A0 (1030x1456)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1487"/>
        <source>A1 (728x1030)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1487"/>
        <source>A2 (515x728)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1487"/>
        <source>A3 (364x515)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1487"/>
        <source>A4 (257x364)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1487"/>
        <source>A5 (182x257)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1487"/>
        <source>A6 (128x182)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1488"/>
        <source>Letter (8.5x11)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1488"/>
        <source>Legal (8.5x14)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1488"/>
        <source>Ledger (17x11)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/resizableboard.cpp" line="1488"/>
        <source>Tabloid (11x17)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Ruler</name>
    <message>
        <location filename="../src/items/ruler.cpp" line="261"/>
        <source>width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/ruler.cpp" line="281"/>
        <source>&amp;cm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/ruler.cpp" line="282"/>
        <source>&amp;in</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>S2S</name>
    <message>
        <location filename="../src/utils/s2s.cpp" line="264"/>
        <source>Failed loading &apos;%1&apos;, %2 line:%3 col:%4</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/utils/s2s.cpp" line="294"/>
        <source>Schematic not found for &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/utils/s2s.cpp" line="316"/>
        <location filename="../src/utils/s2s.cpp" line="793"/>
        <source>Unable to load schematic &apos;%1&apos; for &apos;%2&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/utils/s2s.cpp" line="329"/>
        <source>Schematic &apos;%1&apos; is already using the 0.1inch standard.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/utils/s2s.cpp" line="581"/>
        <source>Missing connector %1 in &apos;%2&apos; schematic of &apos;%3&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/utils/s2s.cpp" line="804"/>
        <source>Failed loading schematic &apos;%1&apos;, %2 line:%3 col:%4</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SchematicFrame</name>
    <message>
        <location filename="../src/items/schematicframe.cpp" line="66"/>
        <source>Project</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/schematicframe.cpp" line="67"/>
        <source>Filename</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/schematicframe.cpp" line="68"/>
        <source>Date</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/schematicframe.cpp" line="69"/>
        <source>Sheet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/schematicframe.cpp" line="70"/>
        <source>Rev</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/schematicframe.cpp" line="309"/>
        <source>shape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/schematicframe.cpp" line="361"/>
        <source>of</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/schematicframe.cpp" line="458"/>
        <source>date</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/schematicframe.cpp" line="480"/>
        <source>sheet</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SchematicSketchWidget</name>
    <message>
        <location filename="../src/sketch/schematicsketchwidget.cpp" line="261"/>
        <source>Change label from %1 to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/schematicsketchwidget.cpp" line="306"/>
        <source>Change voltage from %1 to %2</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SetColorDialog</name>
    <message>
        <location filename="../src/dialogs/setcolordialog.cpp" line="50"/>
        <source>%1 Color...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/setcolordialog.cpp" line="54"/>
        <source>Choose %1 color:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/setcolordialog.cpp" line="67"/>
        <source>Reset to default</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/setcolordialog.cpp" line="71"/>
        <source>Default color (%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/setcolordialog.cpp" line="81"/>
        <source>Pick custom color ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/setcolordialog.cpp" line="94"/>
        <source>Make this the default %1 color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/setcolordialog.cpp" line="100"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/setcolordialog.cpp" line="101"/>
        <source>OK</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/setcolordialog.cpp" line="123"/>
        <source>Pick custom %1 color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/setcolordialog.cpp" line="142"/>
        <source>Current color (%1)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SketchWidget</name>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="690"/>
        <source>loading part</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="694"/>
        <source>done loading</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="1057"/>
        <source>Delete ratsnest</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="1138"/>
        <source>%1 %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="1141"/>
        <source>%1 %2 items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="1548"/>
        <source>Select All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="1548"/>
        <source>Deselect</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="2031"/>
        <source>Add %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="2134"/>
        <source>Selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3290"/>
        <source>Move %2 (%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3293"/>
        <source>Move %2 items (%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3475"/>
        <location filename="../src/sketch/sketchwidget.cpp" line="9475"/>
        <source>Select %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3478"/>
        <location filename="../src/sketch/sketchwidget.cpp" line="9478"/>
        <source>Select %1 items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3566"/>
        <location filename="../src/sketch/sketchwidget.cpp" line="3749"/>
        <source>Disconnect</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3567"/>
        <source>from %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3570"/>
        <source>Move leg of</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3574"/>
        <location filename="../src/sketch/sketchwidget.cpp" line="3761"/>
        <source>Connect</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3575"/>
        <location filename="../src/sketch/sketchwidget.cpp" line="3762"/>
        <source>to %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3630"/>
        <source>Change leg curvature for %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3656"/>
        <source>Change leg bendpoint for %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3757"/>
        <source>Change</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3815"/>
        <source>Create and connect wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3940"/>
        <source>Fritzing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3940"/>
        <source>This seems like an attempt to create a trace across layers. This circumstance should not arise: please contact the developers.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3947"/>
        <source>Create and connect %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3947"/>
        <source>wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="3947"/>
        <source>trace</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="4572"/>
        <source>Rotate %2 (%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="4758"/>
        <source>Flip %2 (%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="5710"/>
        <source>Double-click</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="5710"/>
        <source>Drag or double-click</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="5711"/>
        <source>or alt-drag to move the segment</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="5776"/>
        <source>Double-click to delete this bend point</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="5838"/>
        <source>Note text change</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="5864"/>
        <source>Change %1 label to &apos;%2&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="6376"/>
        <source>Change %1 color from %2 to %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="6382"/>
        <source>Change color of %1 wires to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="6428"/>
        <source>Change %1 width from %2 to %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="6434"/>
        <source>Change width of %1 wires to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7092"/>
        <source>Move label &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7099"/>
        <source>%1 label &apos;%2&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7099"/>
        <source>Rotate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7099"/>
        <source>Flip</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <location filename="../src/sketch/sketchwidget.cpp" line="7134"/>
        <source>show %n part label(s)</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <location filename="../src/sketch/sketchwidget.cpp" line="7137"/>
        <source>hide %n part label(s)</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7151"/>
        <source>Resize Note</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7549"/>
        <source>Change Resistance from %1 to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7573"/>
        <location filename="../src/sketch/sketchwidget.cpp" line="7582"/>
        <source>Change %1 from %2 to %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7680"/>
        <source>Resize ruler to %1 %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7703"/>
        <location filename="../src/sketch/sketchwidget.cpp" line="8588"/>
        <source>Resize board to %1 %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7760"/>
        <source>Create wire from Ratsnest</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7958"/>
        <source>Disconnect all wires from %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="7961"/>
        <source>Disconnect all wires from %1 items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="8239"/>
        <source>Change image from %1 to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="9049"/>
        <source>change pin labels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="9348"/>
        <source>Unrouted connections are highlighted in yellow.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="9349"/>
        <source>There are no unrouted connections</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="9350"/>
        <source>Unrouted connections</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="9351"/>
        <source>%1

Note: you can also trigger this display by mousing down on the routing status text in the status bar.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="9398"/>
        <source>Part &apos;%1&apos; not found in sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="9410"/>
        <source>Add %1 parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="9472"/>
        <source>Deselect all</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/sketchwidget.cpp" line="10005"/>
        <source>test connectors</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SqliteReferenceModel</name>
    <message>
        <location filename="../src/referencemodel/sqlitereferencemodel.cpp" line="129"/>
        <location filename="../src/referencemodel/sqlitereferencemodel.cpp" line="146"/>
        <source>The swapping mechanism is disabled for:

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/referencemodel/sqlitereferencemodel.cpp" line="141"/>
        <source>and %1 other parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/referencemodel/sqlitereferencemodel.cpp" line="158"/>
        <source>and %1 other properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/referencemodel/sqlitereferencemodel.cpp" line="960"/>
        <source>property &apos;%1&apos; in part &apos;%2&apos; with id &apos;%3&apos;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/referencemodel/sqlitereferencemodel.cpp" line="991"/>
        <source>part &apos;%1&apos; with id &apos;%2&apos;; possibly because it has no &apos;family&apos; property.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Stripboard</name>
    <message>
        <location filename="../src/items/stripboard.cpp" line="530"/>
        <source>Restored</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/stripboard.cpp" line="530"/>
        <source>Cut</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <location filename="../src/items/stripboard.cpp" line="531"/>
        <source>%1 %n strip(s)</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <location filename="../src/items/stripboard.cpp" line="675"/>
        <source>rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/stripboard.cpp" line="679"/>
        <source>columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/stripboard.cpp" line="796"/>
        <source>%1 layout</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SymbolPaletteItem</name>
    <message>
        <location filename="../src/items/symbolpaletteitem.cpp" line="406"/>
        <source>voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/symbolpaletteitem.cpp" line="421"/>
        <source>label</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/symbolpaletteitem.cpp" line="443"/>
        <source>Net labels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/symbolpaletteitem.cpp" line="443"/>
        <source>Net labels cannot be blank</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TipsAndTricks</name>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="39"/>
        <source>Fritzing Tips and Tricks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="52"/>
        <source>Tips and Tricks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="69"/>
        <source>Fritzing stores files for custom parts, generated parts, and for other temporary and long-term purposes in a &apos;local storage folder&apos;. On Mac and Linux this is usually ~/.config/Fritzing/. Under Windows Vista and above, it is something like C:\Users\[user name]\AppData\Roaming\Fritzing\; under Windows XP is something like C:\Documents and Settings\[user name]\Application Data\Fritzing\.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="75"/>
        <source>examples</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="76"/>
        <source>Get a jump start by looking at the example circuits under File &gt; Examples.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="80"/>
        <source>parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="81"/>
        <source>Can&apos;t find your part? Search for it by clicking the magnifier icon in the Parts Bin and type in some keywords</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="82"/>
        <source>If you can&apos;t find a part in the Parts Bin, the Generic IC is your friend.  Drag it onto your sketch, then use the widgets in the Inspector to: choose from among 25 different through-hole and SMD packages; change the pin label; and--for DIPs and SIPs--change the number of pins.  You can also change the pin names with the Pin Label editor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="83"/>
        <source>An icon in the parts bin may actually represent multiple related parts.  So when you drag an icon from the parts bin into a sketch, make sure you look at the inspector.  The inspector will display the range of choices available for you to modify a part, or swap it for a related part. The parts bin icon will also be a little &apos;stack&apos; and not just a flat icon.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="84"/>
        <source>The Inspector Window--which lets you change the properties of parts--is only enabled for parts that are in a sketch (not for parts still in a Parts Bin).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="88"/>
        <source>moving and selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="89"/>
        <source>To constrain the motion of a part to horizontal or vertical, hold down the shift key as you drag it.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="90"/>
        <source>If you&apos;re having trouble selecting a part or a wire (segment), try selecting the part that&apos;s in the way and send it to the back: use the Raise and Lower functions on the Part menu or the context menu (right-click menu).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="91"/>
        <source>To more precisely move a selection of parts, use the arrow keys.  Shift-arrow moves by 10 units.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="92"/>
        <source>Click on the mouse position indicator in the status bar (at the bottom) to toggle the units from in to mm to px.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="103"/>
        <source>rotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="104"/>
        <source>To free-rotate a part in Breadboard or PCB view, select it, then hover your mouse near one of the corners until you see the rotate cursor. Mouse down and that corner will follow your mouse as you drag.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="105"/>
        <source>To free-rotate a logo text or image item in PCB view hold down the Alt (Linux: meta) key and free-rotate as usual.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="109"/>
        <source>layers and views</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="110"/>
        <source>To drag the canvas, hold down the space bar and drag with the mouse.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="111"/>
        <source>To toggle the visibility of layer in a view, go to the view menu and choose one of the view layer items.  Or open up the &lt;b&gt;Layers&lt;/b&gt; palette from the &lt;b&gt;Window&lt;/b&gt; menu.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="112"/>
        <source>When you export images from Fritzing, you can choose which layers are exported. Before you choose &apos;Export...&apos;, go into the &apos;View&apos; menu and hide the layers you don&apos;t want to be visible.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="116"/>
        <source>part labels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="117"/>
        <source>To edit a part label, double-click it, or use the text input widget in the inspector window.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="118"/>
        <source>To display different properties in a part label, as well as rotate it, or change the font, right-click the label.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="119"/>
        <source>To move a part label independently from its part, select the part first--both the part and the label will be highlighted. Once the label is selected you can drag it.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="123"/>
        <source>wires and bendpoints</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="124"/>
        <source>To add a bendpoint to a wire, double-click where you want the bendpoint.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="125"/>
        <source>To delete a bendpoint from a wire, double-click it.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="126"/>
        <source>In Schematic or PCB view, if you drag from a bendpoint with the Alt (Linux: Meta) key down, you will drag out a new wire from that bendpoint.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="127"/>
        <source>To drag a wire segment (a section of a wire between two bendpoints), drag it with the Alt (Linux: Meta) key down.  If you also hold down the shift key, the wire segment will be constrained to horizontal or vertical motion.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="128"/>
        <source>Use shift-drag on a wire end or bendpoint to constrain its wire segment to an angle of 45 degrees (or some multiple of 45 degrees).  If the wire segment is connected to other wire segments, the segment you&apos;re dragging will snap to make 90 degree angles with the neighboring wire segment.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="132"/>
        <source>connections</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="133"/>
        <source>To see all the connectors connected to a given connector, hold the mouse down on the connector--all the connections will be highlighted.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="139"/>
        <source>Check out Parts Editor Help under the &lt;b&gt;Help&lt;/b&gt; Menu.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="140"/>
        <source>Before using the Parts Editor, see whether a Generic IC, Mystery Part, or Pin Header will do the job. Once you drop one of these into your sketch, you can change the number of pins, pin spacing, and other properties.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="141"/>
        <source>In the Parts Editor, to select a graphic underneath another graphic, use the mouse wheel while holding down the shift key.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="142"/>
        <source>You can use the Parts Editor to find the SVG file for a part&apos;s image for a given view. In the Parts Editor, click on the tab for that view, then use &lt;b&gt;Show in Folder&lt;/b&gt; under the &lt;b&gt;File&lt;/b&gt; Menu</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="144"/>
        <source>Do not store your custom part files in the Fritzing installation folder. If you upgrade Fritzing, these files will probably be deleted. Also, files in the Fritzing installation folder will not be saved in sketch (.fzz) files, so you won&apos;t be able to share them.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="164"/>
        <source>Have your PCB quickly and easily produced with Fritzing Fab. Hover over the &apos;Fabricate&apos; button to get a quote.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="165"/>
        <source>When using the Fritzing Fab Service, If there are empty areas of the PCB that you do not want filled with copper, use the copper-blocker part. This resizable part will mask out copper fill in the rectangle it covers.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="169"/>
        <source>notes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="170"/>
        <source>To insert a clickable URL into a note, select some text in the note and type ctrl-l (Mac: command-l). (That&apos;s &apos;l&apos; as in the first letter of &apos;link&apos;.) To modify an existing link select the linked text and use ctrl-l (command-l) again.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="174"/>
        <source>local file storage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="148"/>
        <source>pcb layout</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="96"/>
        <source>curves and bendable legs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="97"/>
        <source>In Breadboard view, to drag a part with bendable legs while keeping it connected to the breadboard, hold the Alt (Linux: Meta) key down when you start dragging.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="98"/>
        <source>In Breadboard view, to drag out a wire from the end of a bendable leg, drag with the Alt (Linux: Meta) key down.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="99"/>
        <source>In Breadboard or PCB view, to add a curve to a wire or bendable leg, drag with the Control (Mac: Command) key down.  You can set whether curvy wires are the default in Preferences.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="149"/>
        <source>Always lead a trace straight out of a pin. This helps to prevent short circuits.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="150"/>
        <source>Through-hole parts can be traced from either side of a PCB.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="151"/>
        <source>It makes life easier to route traces horizontally on one side of a PCB and vertically on the other side.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="152"/>
        <source>Route traces in 45-degree angles to reduce noise.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="153"/>
        <source>If Fritzing is missing your special part and you don&apos;t want to build one by yourself, then use pinheaders as connectors and the grid to align them.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="154"/>
        <source>You can put your own Logo in the silkscreen of your PCB. Just use the Logo part of the core library and select your own file. SVG is the best format.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="157"/>
        <source>To create a custom shape for your PCB, import an SVG file.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="158"/>
        <source>To make a stylish Arduino shield in no time, switch the shape of the PCB from a rectangle to the Arduino</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="162"/>
        <source>pcb production</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="163"/>
        <source>Smaller PCBs are more affortable than larger ones. Save space and money.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="155"/>
        <source>Use copper-blocker parts to mask out areas that you want free of copper fill.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="134"/>
        <source>A ratsnest line (very thin &apos;wire&apos;) between connections in one view means that those connections are somehow connected in another view.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="156"/>
        <source>To change trace width, select a trace then use the &lt;b&gt;width&lt;/b&gt; combo box in the Inspector. You can use the drop-down or just type in a number (from 8 to 128).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/help/tipsandtricks.cpp" line="138"/>
        <source>parts editor</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TraceWire</name>
    <message>
        <location filename="../src/items/tracewire.cpp" line="53"/>
        <source>Select from the dropdown, or type in any value from %1 to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/tracewire.cpp" line="84"/>
        <source>width</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TranslatorListModel</name>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="48"/>
        <source>English - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="118"/>
        <source>French - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="49"/>
        <source>German - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="121"/>
        <source>Spanish - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="124"/>
        <source>Portuguese (European)- %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="127"/>
        <source>Portuguese (Brazilian) - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="50"/>
        <source>Hungarian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="51"/>
        <source>Estonian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="52"/>
        <source>Dutch - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="53"/>
        <source>Italian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="54"/>
        <source>Polish - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="130"/>
        <source>Turkish - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="55"/>
        <source>Swedish - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="56"/>
        <source>Galician - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="57"/>
        <source>Indonesian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="58"/>
        <source>Danish - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="61"/>
        <source>Japanese - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="64"/>
        <source>Russian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="67"/>
        <source>Hebrew - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="70"/>
        <source>Arabic - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="73"/>
        <source>Hindi - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="76"/>
        <source>Chinese (Simplified) - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="79"/>
        <source>Chinese (Traditional) - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="82"/>
        <source>Czech - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="85"/>
        <source>Romanian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="88"/>
        <source>Thai - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="91"/>
        <source>Greek - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="94"/>
        <source>Bulgarian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="97"/>
        <source>Korean - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="100"/>
        <source>Slovak - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="103"/>
        <source>Bengali - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="106"/>
        <source>Persian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="109"/>
        <source>Slovenian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="112"/>
        <source>Marathi - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="115"/>
        <source>Ukrainian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="133"/>
        <source>Macedonian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="136"/>
        <source>Serbian - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/dialogs/translatorlistmodel.cpp" line="139"/>
        <source>Urdu - %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>UpdateDialog</name>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="52"/>
        <source>&lt;p&gt;&lt;b&gt;There is a parts library update available!&lt;/b&gt;&lt;/p&gt;&lt;p&gt;Would you like Fritzing to download and install the update now?&lt;br/&gt;See the &lt;a href=&apos;https://github.com/fritzing/fritzing-parts/compare/%1...master&apos;&gt;list of changes here.&lt;/a&gt;&lt;/p&gt;&lt;p&gt;Note: the update may take some minutes and you will have to restart Fritzing.&lt;br/&gt;You can also update later via the &lt;i&gt;Help &amp;rarr; Check for Updates&lt;/i&gt; menu.&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="75"/>
        <source>Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="76"/>
        <source>Update parts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="112"/>
        <source>&lt;p&gt;No new versions found.&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="128"/>
        <source>A new main release is available for downloading:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="132"/>
        <source>A new interim release is available for downloading:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="156"/>
        <source>&lt;p&gt;Checking for new releases...&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="194"/>
        <source>&lt;p&gt;Fritzing is unable to check for--and update--new parts.&lt;br/&gt;If you want this functionality, please enable write permission on this folder:&lt;br/&gt; &apos;%1&apos;.&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="207"/>
        <source>&lt;p&gt;Checking for new parts...&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="216"/>
        <source>&lt;p&gt;No new releases or new parts found&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="244"/>
        <source>New files:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="245"/>
        <source>Modified Files:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="275"/>
        <source>Fritzing was unable to clean the files, so the update cannot proceed.&lt;br/&gt;You may have to reinstall Fritzing.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="391"/>
        <source>&lt;p&gt;Installing new parts. This may take a few minutes.&lt;br/&gt;Please do not interrupt the process, as your parts folder could be damaged.&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="302"/>
        <source>&lt;p&gt;Sorry, unable to retrieve update info&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="318"/>
        <source>&lt;p&gt;Sorry, unable to retrieve parts update info&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="378"/>
        <source>&lt;p&gt;Downloading new parts...&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="387"/>
        <source>&lt;p&gt;Sorry, unable to download new parts&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="407"/>
        <source>&lt;p&gt;New parts successfully installed!&lt;/p&gt;&lt;p&gt;Fritzing must be restarted, so the &apos;Close&apos; button will close Fritzing.&lt;br/&gt;The new parts will be available when you run Fritzing again.&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/version/updatedialog.cpp" line="412"/>
        <source>&lt;p&gt;Sorry, unable to install new parts: %1&lt;br/&gt;Fritzing must nevertheless be restarted, so the &apos;Close&apos; button will close Fritzing.&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>WelcomeView</name>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="371"/>
        <source>Recent Sketches</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="404"/>
        <source>New Sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="412"/>
        <source>Open Sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="457"/>
        <source>Fab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="457"/>
        <source>Donate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="461"/>
        <source>Fritzing development needs you</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="462"/>
        <source>Software development and maintenance is a lot of work. Without your support, it is not possible to keep that up.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="464"/>
        <source>Donate and leave a comment.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="465"/>
        <source>Donate now</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="483"/>
        <source>Fritzing Fab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="484"/>
        <source>Fritzing Fab is an easy and affordable service for producing professional PCBs from your Fritzing sketches.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="486"/>
        <source>produce your first pcb now &gt;&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="487"/>
        <source>Order your PCB now.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="570"/>
        <source>&lt;a href=&apos;%1&apos;&gt;&lt;img src=&apos;%2&apos;/&gt;&lt;/a&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="589"/>
        <source>Projects</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="589"/>
        <source>Blog</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="592"/>
        <source>Fritzing News.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="597"/>
        <source>Fritzing Projects.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="663"/>
        <source>&lt;a href=&apos;%1&apos;&gt;&lt;img src=&apos;%2&apos; /&gt;&lt;/a&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="705"/>
        <source>No recent sketches found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="744"/>
        <source>Unable to reach blog.fritzing.org</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="744"/>
        <source>Unable to reach fritzing.org/projects</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="965"/>
        <source>Tip of the Day:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="992"/>
        <source>All Tips</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/sketch/welcomeview.cpp" line="1000"/>
        <source>Next Tip</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Wire</name>
    <message>
        <location filename="../src/items/wire.cpp" line="1268"/>
        <source>super fine (8 mil)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1269"/>
        <source>extra thin (12 mil)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1272"/>
        <source>thin (16 mil)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1275"/>
        <source>standard (24 mil)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1277"/>
        <source>thick (32 mil)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1278"/>
        <source>extra thick (48 mil)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1283"/>
        <location filename="../src/items/wire.cpp" line="1298"/>
        <source>blue</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1284"/>
        <location filename="../src/items/wire.cpp" line="1299"/>
        <source>red</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1285"/>
        <location filename="../src/items/wire.cpp" line="1300"/>
        <source>black</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1286"/>
        <location filename="../src/items/wire.cpp" line="1301"/>
        <source>yellow</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1287"/>
        <location filename="../src/items/wire.cpp" line="1302"/>
        <source>green</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1288"/>
        <location filename="../src/items/wire.cpp" line="1303"/>
        <source>grey</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1289"/>
        <location filename="../src/items/wire.cpp" line="1304"/>
        <source>white</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1290"/>
        <location filename="../src/items/wire.cpp" line="1305"/>
        <source>orange</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1291"/>
        <location filename="../src/items/wire.cpp" line="1306"/>
        <source>ochre</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1292"/>
        <location filename="../src/items/wire.cpp" line="1307"/>
        <source>cyan</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1293"/>
        <location filename="../src/items/wire.cpp" line="1308"/>
        <source>brown</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1294"/>
        <location filename="../src/items/wire.cpp" line="1309"/>
        <source>purple</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1295"/>
        <location filename="../src/items/wire.cpp" line="1310"/>
        <source>pink</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1611"/>
        <source>color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/items/wire.cpp" line="1635"/>
        <source>Banded</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ZoomSlider</name>
    <message>
        <location filename="../src/utils/zoomslider.cpp" line="153"/>
        <source>%</source>
        <translation type="unfinished"></translation>
    </message>
</context>
</TS>