Skip to content

Latest commit

 

History

History
85 lines (59 loc) · 3.36 KB

TODO.md

File metadata and controls

85 lines (59 loc) · 3.36 KB
Raw

  • Add sensible failsafe configuration

  • Separate hardware dependent files so that it is easy to port to other chips

    • How to deal with libopencm3?
    • Support STM32 Nucleo?
    • Support Teensy?

  • Add auto-stick calibration function

    • Applies to all analog inputs
    • Triggered when the transmitter is powered on while at least one input of type ANALOG_WITH_CENTER_AUTO_RETURN or MOMENTARY_ON_OFF is held away from the center.
    • Needs to beep similar to self-timer on camera, getting faster when a timeout expires. Once expires, it measures the center position. Only analog inputs with a center are measured
    • When done, beep a different pattern and monitor the values. Record highest and lowest values. Make sure we've seen input on all analog channels before finishing the procedure, with a different beep.
    • While calibrating, still run the RF(?)

  • Center detent: beep when center

    • Applies to ANALOG_WITH_CENTER only

  • Beep when throttle not 0 at start of transmitter, and refuse operation

    • Find throttle by looking for "TH" and "THR" with analog type that is not ANALOG_WITH_CENTER_AUTO_RETURN
    • But still allow configurator to work
    • Can this be an issue when the sticks are not calibrated yet?

  • Run-time adaptation to hardware_inputs and logical_inputs changes

  • Test lots of active mixer units, check how long calculation takes

  • How to deal with switches and pots that are not present; or a function that was designed for a multi-pos pot but now is a switch?

  • How to deal with forward/reverse, when the TX TH is without center detent? dangerous!

  • Add version date (based on Git) to firmware

nRF51 UART bridge

  • Send MAX_PACKETS_IN_TRANSIT upwards
  • Implement a command to query the MAX_PACKETS_IN_TRANSIT value for UART purpose, since there is no explicit connection on the UART as there is with websocket or other transports
  • Propagate nRF connection lost back via bridges
    • Especially important since the other protocols are considered reliable

Orange Pi

  • Describe hardware
  • Full installation documentation
  • LED indicator on/connected/transferring data
  • Make a default web page to show instead of the nginx one

Configurator web-app

  • Database syncing with bridge, including history

  • Use a better app-shell architecture

  • Base on web components

    • Polymer? SkateJS? VUE.js?
    • Make ranges (limits, endpoints) not be able to go past each-other
      • Maybe make a custom element that limits upper and lower?

  • Add help text

    • How do we get a description of the elements in the configuration?
    • Make help page for logical inputs to explain valid combinations

  • Implement passphrase UI

  • Live stick/switch/output view

    • Add more elements like normalized ADC values, switch values, etc to live_t.

  • Use https://github.com/jakearchibald/indexeddb-promised/blob/master/lib/idb.js

    • Prepare the database for multiple object stores

  • The backup JSON file should be human readable, right now it is just binary data wrapped in JSON

  • Warning message if left/center/right in reverse order, or handle in SW automatically

  • Warning message for configuration that is only applicable after reset, i.e. port settings

  • Explain trim (logical inputs)

  • What do colors mean when selecting labels on logical inputs?

  • Sometimes "connection lost" message is shown when refreshing or going back and forth (too fast)