Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
324 lines (251 sloc) 14.1 KB

gluster-block

gluster-block is a CLI utility, which aims at making Gluster backed block storage creation and maintenance as simple as possible.

Demo


asciicast

Install


# git clone https://github.com/gluster/gluster-block.git
# cd gluster-block/

# dnf install gcc autoconf automake make file libtool libuuid-devel json-c-devel glusterfs-api-devel glusterfs-server tcmu-runner targetcli

On Fedora27 and Centos7 [Which use legacy glibc RPC], pass '--enable-tirpc=no' flag at configure time
# ./autogen.sh && ./configure --enable-tirpc=no && make -j install

On Fedora28 and higher [Which use TIRPC], in addition to above, we should also install
# dnf install rpcgen libtirpc-devel

And pass '--enable-tirpc=yes'(default) flag or nothing at configure time
# ./autogen.sh && ./configure && make -j install

Usage


Prerequisites: this guide assumes that the following are already present

  • A block hosting gluster volume with name 'hosting-volume'
  • Open 24007(for glusterd) 24010(gluster-blockd) 3260(iscsi targets) 111(rpcbind) ports and glusterfs service in your firewall

Daemon: gluster-blockd runs on all the nodes

# gluster-blockd --help
gluster-blockd (0.4)
usage:
  gluster-blockd [--glfs-lru-count <COUNT>]
                 [--log-level <LOGLEVEL>]
                 [--no-remote-rpc]

commands:
  --glfs-lru-count <COUNT>
        Glfs objects cache capacity [max: 512] [default: 5]
  --log-level <LOGLEVEL>
        Logging severity. Valid options are,
        TRACE, DEBUG, INFO, WARNING, ERROR, CRIT and NONE [default: INFO]
  --no-remote-rpc
        Ignore remote rpc communication, capabilities check and
        other node sanity checks
  --help
        Show this message and exit.
  --version
        Show version info and exit.

You can run gluster-blockd as systemd service, note '/etc/sysconfig/gluster-blockd' is the configuration file which gets dynamicaly reloaded on changing any options.

# cat /etc/sysconfig/gluster-blockd
# systemctl daemon-reload
# systemctl start gluster-blockd

CLI: you can choose to run gluster-block(cli) from any node which has gluster-blockd running

# gluster-block --help
gluster-block (0.4)
usage:
  gluster-block [timeout <seconds>] <command> <volname[/blockname]> [<args>] [--json*]

commands:
  create  <volname/blockname> [ha <count>]
                              [auth <enable|disable>]
                              [prealloc <full|no>]
                              [storage <filename>]
                              [ring-buffer <size-in-MB-units>]
                              [block-size <size-in-Byte-units>]
                              <host1[,host2,...]> [size]
        create block device [defaults: ha 1, auth disable, prealloc full, size in bytes,
                             ring-buffer and block-size default size dependends on kernel]

  list    <volname>
        list available block devices.

  info    <volname/blockname>
        details about block device.

  delete  <volname/blockname> [unlink-storage <yes|no>] [force]
        delete block device.

  modify  <volname/blockname> [auth <enable|disable>] [size <size> [force]]
        modify block device.

  replace <volname/blockname> <old-node> <new-node> [force]
        replace operations.

  genconfig <volname[,volume2,volume3,...]> enable-tpg <host>
        generate the block volumes target configuration.

  help
        show this message and exit.

  version
        show version info and exit.

common cli options: (fixed formats)
  timeout <seconds>
        it is the time in seconds that cli can wait for daemon to respond.
        [default: timeout 300]
  --json*
        used to request the output result in json format [default: plain text]
        supported JSON formats: --json|--json-plain|--json-spaced|--json-pretty

Example:

The hosts involved:

  • 192.168.1.11, 192.168.1.12, 192.168.1.13: All nodes run gluster-blockd.service and glusterd.service (three nodes to achieve mutipath for HA)
  • 192.168.1.14: Initiator, iSCSI client

Preparation:

  • Create a gluster trusted storage pool of the 3 nodes 192.168.1.11, 192.168.1.12, and 192.168.1.13.
  • Create a block hosting gluster volume called hosting-volume on the gluster cluster.
    • Read More on how to create a gluster volume.
    • We recommend replica 3 volume with group profile applied on it.
      • Helpful command: # gluster vol set <block-hosting-volume> group gluster-block

You can execute gluster-block CLI from any of the 3 nodes where glusterd and gluster-blockd are running.

On the Server/Target node[s]
Create 1G gluster block storage with name 'block-volume'
# gluster-block create hosting-volume/block-volume ha 3 192.168.1.11,192.168.1.12,192.168.1.13 1GiB
IQN: iqn.2016-12.org.gluster-block:aafea465-9167-4880-b37c-2c36db8562ea
PORTAL(S): 192.168.1.11:3260 192.168.1.12:3260 192.168.1.13:3260
RESULT: SUCCESS

Enable Authentication (this can be part of create as well)
# gluster-block modify hosting-volume/block-volume auth enable
IQN: iqn.2016-12.org.gluster-block:aafea465-9167-4880-b37c-2c36db8562ea
USERNAME: aafea465-9167-4880-b37c-2c36db8562ea
PASSWORD: 4a5c9b84-3a6d-44b4-9668-c9a6d699a5e9
SUCCESSFUL ON:  192.168.1.11 192.168.1.12 192.168.1.13
RESULT: SUCCESS

# gluster-block list hosting-volume
block-volume

# gluster-block info hosting-volume/block-volume
NAME: block-volume
VOLUME: hosting-volume
GBID: 6b60c53c-8ce0-4d8d-a42c-5b546bca3d09
SIZE: 1.0 GiB
HA: 3
EXPORTED NODE(S): 192.168.1.11 192.168.1.12 192.168.1.13

NOTE: Block targets created using gluster-block utility will use TPG: 1 and LUN: 0.

On the Client/Initiator node
# dnf install iscsi-initiator-utils device-mapper-multipath
# systemctl start iscsid.service
# systemctl enable iscsid.service
# lsblk (note the available devices)

You can skip configuring multipath, if you choose not to enable mpath.
Below we set mapth in Active/Passive mode; Note currently Active/Active is not supported.
# modprobe dm_multipath
# mpathconf --enable

Please add the below configuration at the end of /etc/multipath.conf file.

For tcmu-runner version < 1.4.0, use:
# LIO iSCSI
devices {
        device {
                vendor "LIO-ORG"
                user_friendly_names "yes" # names like mpatha
                path_grouping_policy "failover" # one path per group
                path_selector "round-robin 0"
                failback immediate
                path_checker "tur"
                prio "const"
                no_path_retry 120
                rr_weight "uniform"
        }
}

For tcmu-runner version >= 1.4.0, use:
# LIO iSCSI
devices {
        device {
                vendor "LIO-ORG"
                user_friendly_names "yes" # names like mpatha
                path_grouping_policy "failover" # one path per group
                hardware_handler "1 alua"
                path_selector "round-robin 0"
                failback immediate
                path_checker "tur"
                prio "alua"
                no_path_retry 120
                rr_weight "uniform"
        }
}

# systemctl restart multipathd
# systemctl enable multipathd

Discovery ...
# iscsiadm -m discovery -t st -p 192.168.1.11

Update Credentials (Skip this step incase if you have not enabled auth)
# iscsiadm -m node -T "iqn.2016-12.org.gluster-block:aafea465-9167-4880-b37c-2c36db8562ea" -o update
 -n node.session.auth.authmethod -v CHAP -n node.session.auth.username -v aafea465-9167-4880-b37c-2c36db8562ea -n node
.session.auth.password -v 4a5c9b84-3a6d-44b4-9668-c9a6d699a5e9

Login ...
# iscsiadm -m node -T "iqn.2016-12.org.gluster-block:aafea465-9167-4880-b37c-2c36db8562ea" -l

# lsblk (note the new devices, let's say sdb, sdc and sdd multipath to mpatha)
# mkfs.xfs /dev/mapper/mpatha
# mount /dev/mapper/mpatha /mnt
On the Server/Target node[s] to resize the block volume
Resizing 1G gluster block volume 'block-volume' to 2G
# gluster-block modify hosting-volume/block-volume size 2GiB
IQN: iqn.2016-12.org.gluster-block:aafea465-9167-4880-b37c-2c36db8562ea
SIZE: 2.0 GiB
SUCCESSFUL ON: 192.168.1.11 192.168.1.12 192.168.1.13
RESULT: SUCCESS
On Initiator side, commands to refresh the device after block volume resizing
Rescan the devices
# iscsiadm -m node -R

Rescan the multipath
# multipathd -k'resize map mpatha'

Grow the filesystem
# xfs_growfs  /mnt
Deleting the block volume
On client node
# umount /mnt
# iscsiadm -m node -u

On the server node
# gluster-block delete hosting-volume/block-volume
SUCCESSFUL ON: 192.168.1.11 192.168.1.12 192.168.1.13
RESULT: SUCCESS

NOTE: gluster-block cannot track iSCSI targets created manually using targetcli.


About Gluster

Gluster is a well known scale-out distributed storage system, flexible in its design and easy to use. One of its key goals is to provide high availability of data. Gluster is very easy to setup and use. Addition and removal of storage servers from a Gluster cluster is intuitive. These capabilities along with other data services that Gluster provides makes it a reliable software defined storage platform.

We can access glusterfs via FUSE module. However to perform a single filesystem operation various context switches are required which can often exhibit performance issues. Libgfapi is a userspace library for accessing data in Glusterfs. It can perform I/O on gluster volumes without the FUSE module, kernel VFS layer and hence requires no context switches. It exposes a filesystem like API for accessing gluster volumes. Samba, NFS-Ganesha, QEMU and now the tcmu-runner all use libgfapi to integrate with Gluster.

A unique distributed storage solution build on traditional filesystems

How we provide block storage in gluster ?

untitled diagram

  1. Create a file in the gluster volume (Block Hosting Volume)
  2. We expose the file in the gluster volume as tcmu backstore using tcmu-runner, exporting the target file as iSCSI LUN and
  3. From the initiator we login to the exported LUN and play with the block device

Background

The SCSI subsystem uses a form of client-server model. The Client/Initiator request I/O happen through target which is a storage device. The SCSI target subsystem enables a computer node to behave as a SCSI storage device, responding to storage requests by other SCSI initiator nodes.

In simple terms SCSI is a set of standards for physically connecting and transferring data between computers and peripheral devices.

The most common implementation of the SCSI target subsystem is an iSCSIserver, iSCSI transports block level data between the iSCSI initiator and the target which resides on the actual storage device. iSCSi protocol wraps up the SCSI commands and sends it over TCP/IP layer. Up on receiving the packets at the other end it disassembles them to form the same SCSI commands, hence on the OS’es it seen as local SCSI device.

In other words iSCSI is SCSI over TCP/IP.

The LIO project began with the iSCSI design as its core objective, and created a generic SCSI target subsystem to support iSCSI. LIO is the SCSI target in the Linux kernel. It is entirely kernel code, and allows exported SCSI logical units (LUNs) to be backed by regular files or block devices.

LIO is Linux IO target, is an implementation of iSCSI target.

TCM is another name for LIO, an in-kernel iSCSI target (server). As we know existing TCM targets run in the kernel. TCMU (TCM in Userspace) allows userspace programs to be written which act as iSCSI targets. These enables wider variety of backstores without kernel code. Hence the TCMU userspace-passthrough backstore allows a userspace process to handle requests to a LUN. TCMU utilizes the traditional UIO subsystem, which is designed to allow device driver development in userspace.

One such backstore with best clustered network storage capabilities is GlusterFS

Any TCMU userspace-passthrough can utilize the TCMU framework handling the messy details of the TCMU interface. One such passthrough is Tcmu-runner (Thanks to Andy Grover). Tcmu-runner has a glusterfs handler that can interact with the backed file in gluster volume over gluster libgfapi interface and can show it as a target (over network).

Some responsibilities of userspace-passthrough include,

Discovering and configuring TCMU UIO devices waiting for the events on the device and managing the command ring buffers

TargetCli is the general management platform for the LIO/TCM/TCMU. TargetCli with its shell interface is used to configure LIO.

Think it like a shell which makes life easy in configuring LIO core


License

gluster-block is licensed to you under your choice of the GNU Lesser General Public License, version 3 or any later version (LGPLv3 or later), or the GNU General Public License, version 2 (GPLv2), in all cases as published by the Free Software Foundation.

Maintainers

See MAINTAINERS file

Community

  • Please join our mailing list
  • To ask a question or start a discussion, you can also raise an issue
  • IRC: #gluster-devel on Freenode
You can’t perform that action at this time.