Skip to content

History / Grbl v1.1 Configuration

Edit page New page

Revisions

  • Revert 05ad32a956003374a37e6fa841374e5f12f6e87b...ee42c08094e539e90cb23fa04092c3e9cec53c9d

    @breiler breiler committed Mar 6, 2024
    e888179

  • Destroyed Grbl v1.1 Configuration (markdown)

    @Hostaler Hostaler committed Mar 5, 2024
    1a8ebe9

  • Created Grbl v1.1 Configuration (markdown)

    @Hostaler Hostaler committed Mar 5, 2024
    0759004

  • Destroyed Grbl v1.1 Configuration (markdown)

    @Hostaler Hostaler committed Mar 5, 2024
    3e013de

  • Created Grbl v1.1 Configuration (markdown)

    @Hostaler Hostaler committed Mar 5, 2024
    f9465e5

  • Destroyed Grbl v1.1 Configuration (markdown)

    @Hostaler Hostaler committed Mar 5, 2024
    e5e3c97

  • Created Grbl v1.1 Configuration (markdown)

    @Hostaler Hostaler committed Mar 5, 2024
    83ffa25

  • Destroyed Grbl v1.1 Configuration (markdown)

    @Hostaler Hostaler committed Mar 5, 2024
    c344a3e

  • Created Grbl v1.1 Configuration (markdown)

    @Hostaler Hostaler committed Mar 5, 2024
    05060da

  • Destroyed Grbl v1.1 Configuration (markdown)

    @Hostaler Hostaler committed Mar 5, 2024
    ee42c08

  • Removed an extra space from "baud rate to **115200**", changed spelling of permanant to permanent and changed "Enter a setting a 10-20%" to "Enter a setting at 10-20%"

    @JollyGreen21 JollyGreen21 committed Nov 22, 2021
    3bc14b4

  • Restore the original English document

    @ShenRen ShenRen committed Oct 13, 2021
    a96007f

  • Updated Grbl v1.1 Configuration (markdown)

    @ShenRen ShenRen committed Oct 12, 2021
    4bd6c69

  • Updated Grbl v1.1 Configuration (markdown)

    @ShenRen ShenRen committed Oct 12, 2021
    a871517

  • Updated Grbl v1.1 Configuration (markdown)

    @ShenRen ShenRen committed Oct 12, 2021
    32d571a

  • Updated Grbl v1.1 Configuration (markdown)

    @ShenRen ShenRen committed Oct 12, 2021
    b373b7a

  • Updated Grbl v1.1 Configuration (markdown)

    @ShenRen ShenRen committed Oct 12, 2021
    6027a2c

  • Updated Grbl v1.1 Configuration (markdown)

    @ShenRen ShenRen committed Oct 12, 2021
    5c3602e

  • Updated Grbl v1.1 Configuration (markdown)

    @ShenRen ShenRen committed Oct 12, 2021
    9c4aeba

  • Updated Grbl v1.1 Configuration (markdown)

    @ShenRen ShenRen committed Oct 12, 2021
    6e39272

  • Updated Grbl v1.1 Configuration (markdown)

    @breiler breiler committed Nov 11, 2020
    6eb3dd4

  • Revert 1b370671ccc991dc9275b3d9801a9d6098b52d36...71c3a6665dd73c000cac791a5b57a57447a117d9 on Grbl v1.1 Configuration

    @arkypita arkypita committed May 9, 2020
    2638677

  • This page is a copy of the original content restored from google cache. Please @chamnit check this edit!

    @arkypita arkypita committed May 9, 2020
    71c3a66

  • Destroyed Grbl v1.1 Configuration (markdown)

    @Erry12 Erry12 committed May 8, 2020
    fa91d21

  • Hi dear, I took almost one day and half to figure out that $13x variables were directly related to the machine coordinates shown in the grblControl application. Just a heads up. Thanks.

    @renatopierri renatopierri committed Apr 19, 2020
    1b37067

  • Removed note about needing a pull-down resistor when inverting probe pin, as DISABLE_PROBE_PIN_PULL_UP has been commented out in config.h. This could cause probing to not work at all with probe pin set to inverted. (see https://github.com/gnea/grbl/blob/5967839ab38f8e984a384db1f64e781cffb9e739/grbl/probe.c#L28-L38)

    @DEF7 DEF7 committed Dec 14, 2017
    80159e5

  • Convert settings list to a table instead of code block, so the links work.

    @anders-liu anders-liu committed Nov 11, 2017
    049e3e6

  • Add links and brief descriptions to command list summary.

    @anders-liu anders-liu committed Nov 11, 2017
    f7a8ef4

  • Updated Grbl v1.1 Configuration (markdown)

    @chamnit chamnit committed Aug 27, 2017
    75dbaf2

  • Updated Grbl v1.1 Configuration (markdown)

    @chamnit chamnit committed Jun 2, 2017
    b97d51a