mac.c

/*
 * Copyright (c) 2005-2011 Atheros Communications Inc.
 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include "mac.h"

#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <linux/module.h>

#include "hif.h"
#include "core.h"
#include "debug.h"
#include "wmi.h"
#include "htt.h"
#include "txrx.h"
#include "testmode.h"
#include "wmi.h"
#include "wmi-tlv.h"
#include "wmi-ops.h"
#include "wow.h"

/*********/
/* Rates */
/*********/

static struct ieee80211_rate ath10k_rates[] = {
	{ .bitrate = 10,
	  .hw_value = ATH10K_HW_RATE_CCK_LP_1M },
	{ .bitrate = 20,
	  .hw_value = ATH10K_HW_RATE_CCK_LP_2M,
	  .hw_value_short = ATH10K_HW_RATE_CCK_SP_2M,
	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
	{ .bitrate = 55,
	  .hw_value = ATH10K_HW_RATE_CCK_LP_5_5M,
	  .hw_value_short = ATH10K_HW_RATE_CCK_SP_5_5M,
	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
	{ .bitrate = 110,
	  .hw_value = ATH10K_HW_RATE_CCK_LP_11M,
	  .hw_value_short = ATH10K_HW_RATE_CCK_SP_11M,
	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },

	{ .bitrate = 60, .hw_value = ATH10K_HW_RATE_OFDM_6M },
	{ .bitrate = 90, .hw_value = ATH10K_HW_RATE_OFDM_9M },
	{ .bitrate = 120, .hw_value = ATH10K_HW_RATE_OFDM_12M },
	{ .bitrate = 180, .hw_value = ATH10K_HW_RATE_OFDM_18M },
	{ .bitrate = 240, .hw_value = ATH10K_HW_RATE_OFDM_24M },
	{ .bitrate = 360, .hw_value = ATH10K_HW_RATE_OFDM_36M },
	{ .bitrate = 480, .hw_value = ATH10K_HW_RATE_OFDM_48M },
	{ .bitrate = 540, .hw_value = ATH10K_HW_RATE_OFDM_54M },
};

#define ATH10K_MAC_FIRST_OFDM_RATE_IDX 4

#define ath10k_a_rates (ath10k_rates + ATH10K_MAC_FIRST_OFDM_RATE_IDX)
#define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - \
			     ATH10K_MAC_FIRST_OFDM_RATE_IDX)
#define ath10k_g_rates (ath10k_rates + 0)
#define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates))

static bool ath10k_mac_bitrate_is_cck(int bitrate)
{
	switch (bitrate) {
	case 10:
	case 20:
	case 55:
	case 110:
		return true;
	}

	return false;
}

static u8 ath10k_mac_bitrate_to_rate(int bitrate)
{
	return DIV_ROUND_UP(bitrate, 5) |
	       (ath10k_mac_bitrate_is_cck(bitrate) ? BIT(7) : 0);
}

u8 ath10k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband,
			     u8 hw_rate, bool cck)
{
	const struct ieee80211_rate *rate;
	int i;

	for (i = 0; i < sband->n_bitrates; i++) {
		rate = &sband->bitrates[i];

		if (ath10k_mac_bitrate_is_cck(rate->bitrate) != cck)
			continue;

		if (rate->hw_value == hw_rate)
			return i;
		else if (rate->flags & IEEE80211_RATE_SHORT_PREAMBLE &&
			 rate->hw_value_short == hw_rate)
			return i;
	}

	return 0;
}

u8 ath10k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband,
			     u32 bitrate)
{
	int i;

	for (i = 0; i < sband->n_bitrates; i++)
		if (sband->bitrates[i].bitrate == bitrate)
			return i;

	return 0;
}

static int ath10k_mac_get_max_vht_mcs_map(u16 mcs_map, int nss)
{
	switch ((mcs_map >> (2 * nss)) & 0x3) {
	case IEEE80211_VHT_MCS_SUPPORT_0_7: return BIT(8) - 1;
	case IEEE80211_VHT_MCS_SUPPORT_0_8: return BIT(9) - 1;
	case IEEE80211_VHT_MCS_SUPPORT_0_9: return BIT(10) - 1;
	}
	return 0;
}

static u32
ath10k_mac_max_ht_nss(const u8 ht_mcs_mask[IEEE80211_HT_MCS_MASK_LEN])
{
	int nss;

	for (nss = IEEE80211_HT_MCS_MASK_LEN - 1; nss >= 0; nss--)
		if (ht_mcs_mask[nss])
			return nss + 1;

	return 1;
}

static u32
ath10k_mac_max_vht_nss(const u16 vht_mcs_mask[NL80211_VHT_NSS_MAX])
{
	int nss;

	for (nss = NL80211_VHT_NSS_MAX - 1; nss >= 0; nss--)
		if (vht_mcs_mask[nss])
			return nss + 1;

	return 1;
}

int ath10k_mac_ext_resource_config(struct ath10k *ar, u32 val)
{
	enum wmi_host_platform_type platform_type;
	int ret;

	if (test_bit(WMI_SERVICE_TX_MODE_DYNAMIC, ar->wmi.svc_map))
		platform_type = WMI_HOST_PLATFORM_LOW_PERF;
	else
		platform_type = WMI_HOST_PLATFORM_HIGH_PERF;

	ret = ath10k_wmi_ext_resource_config(ar, platform_type, val);

	if (ret && ret != -EOPNOTSUPP) {
		ath10k_warn(ar, "failed to configure ext resource: %d\n", ret);
		return ret;
	}

	return 0;
}

/* 0:  Full hardware crypt
 * 1:  Tx hardware crypt, but expect rx software crypt (use native wifi tx type)
 */
int ath10k_modparam_nohwcrypt;
module_param_named(nohwcrypt, ath10k_modparam_nohwcrypt, int, 0444);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware rx decrypt feature");
int ath10k_modparam_target_num_vdevs_ct = DEF_TARGET_10X_NUM_VDEVS_CT;
module_param_named(num_vdevs_ct, ath10k_modparam_target_num_vdevs_ct, int, 0444);
MODULE_PARM_DESC(num_vdevs_ct, "Maximum vdevs to request from firmware");

/* More than 127 seems to cause issues when using HW de-crypt, so default to 127. */
int ath10k_modparam_target_num_peers_ct = 127;
module_param_named(num_peers_ct, ath10k_modparam_target_num_peers_ct, int, 0444);
MODULE_PARM_DESC(num_peers_ct, "Maximum peers to request from firmware");

/* These consume a fair bit of RAM on target. */
int ath10k_modparam_target_num_msdu_desc_ct = TARGET_10X_NUM_MSDU_DESC;
module_param_named(num_msdu_desc_ct, ath10k_modparam_target_num_msdu_desc_ct, int, 0444);
MODULE_PARM_DESC(num_msdu_desc_ct, "Maximum MSDU Descriptors in firmware (must be multiple of 8)");

/* The firmware tries to cache rate-ctrl objects in the host (driver) memory.  But,
 * with lots of active stations, this appears to cause constant cache swapping and
 * in the end, rate-ctrl fails to work well at all.
 * CT Firmware has lots of RAM savings, especially when using fewer than 64 vdevs,
 * so allow users to configure more than the default (currently 32) of in-ram
 * rate-ctrl objects.  As long as firmware RAM is available, allocating as many
 * rate-ctrl objects as possible (up to number of peers) is probably a good idea.
 * This setting should be harmless in all CT firmware, but it will only have an
 * effect in beta-16 firmware and later.  Setting value to 0 means use firmware
 * defaults.
 */
int ath10k_modparam_target_num_rate_ctrl_objs_ct = 0;
module_param_named(num_rate_ctrl_objs_ct, ath10k_modparam_target_num_rate_ctrl_objs_ct, int, 0444);
MODULE_PARM_DESC(num_rate_ctrl_objs_ct, "Number of rate-ctrl objects to cache in firmware RAM");


/**********/
/* Crypto */
/**********/

static int ath10k_send_key(struct ath10k_vif *arvif,
			   struct ieee80211_key_conf *key,
			   enum set_key_cmd cmd,
			   const u8 *macaddr, u32 flags)
{
	struct ath10k *ar = arvif->ar;
	struct wmi_vdev_install_key_arg arg = {
		.vdev_id = arvif->vdev_id,
		.key_idx = key->keyidx,
		.key_len = key->keylen,
		.key_data = key->key,
		.key_flags = flags,
		.macaddr = macaddr,
	};
	int ret1, ret2;

	lockdep_assert_held(&arvif->ar->conf_mutex);

	switch (key->cipher) {
	case WLAN_CIPHER_SUITE_CCMP:
		arg.key_cipher = WMI_CIPHER_AES_CCM;
		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV_MGMT;
		break;
	case WLAN_CIPHER_SUITE_TKIP:
		arg.key_cipher = WMI_CIPHER_TKIP;
		arg.key_txmic_len = 8;
		arg.key_rxmic_len = 8;
		break;
	case WLAN_CIPHER_SUITE_WEP40:
	case WLAN_CIPHER_SUITE_WEP104:
		arg.key_cipher = WMI_CIPHER_WEP;
		break;
	case WLAN_CIPHER_SUITE_AES_CMAC:
		WARN_ON(1);
		return -EINVAL;
	default:
		ath10k_warn(ar, "cipher %d is not supported\n", key->cipher);
		return -EOPNOTSUPP;
	}

	if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;

	if (cmd == DISABLE_KEY) {
		arg.key_cipher = WMI_CIPHER_NONE;
		arg.key_data = NULL;
	}

	ret1 = ath10k_wmi_vdev_install_key(arvif->ar, &arg);
	ret2 = ath10k_wmi_barrier(ar);
	if (ret2) {
		ath10k_err(ar, "failed to ping firmware: %d\n", ret2);
		return ret2;
	}
	return ret1;
}

static int ath10k_install_key(struct ath10k_vif *arvif,
			      struct ieee80211_key_conf *key,
			      enum set_key_cmd cmd,
			      const u8 *macaddr, u32 flags)
{
	struct ath10k *ar = arvif->ar;
	int ret;
	unsigned long time_left;

	lockdep_assert_held(&ar->conf_mutex);

	reinit_completion(&ar->install_key_done);

	if (arvif->nohwcrypt)
		return 1;

	ret = ath10k_send_key(arvif, key, cmd, macaddr, flags);
	if (ret)
		return ret;

	time_left = wait_for_completion_timeout(&ar->install_key_done, 3 * HZ);
	if (time_left == 0)
		return -ETIMEDOUT;

	ret = ar->install_key_rv;
	return ret;
}

static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif,
					const u8 *addr)
{
	struct ath10k *ar = arvif->ar;
	struct ath10k_peer *peer;
	int ret;
	int i;
	u32 flags;

	lockdep_assert_held(&ar->conf_mutex);

	if (WARN_ON(arvif->vif->type != NL80211_IFTYPE_AP &&
		    arvif->vif->type != NL80211_IFTYPE_ADHOC &&
		    arvif->vif->type != NL80211_IFTYPE_MESH_POINT))
		return -EINVAL;

	spin_lock_bh(&ar->data_lock);
	peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
	spin_unlock_bh(&ar->data_lock);

	if (!peer)
		return -ENOENT;

	for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) {
		if (arvif->wep_keys[i] == NULL)
			continue;

		switch (arvif->vif->type) {
		case NL80211_IFTYPE_AP:
			flags = WMI_KEY_PAIRWISE;

			if (arvif->def_wep_key_idx == i)
				flags |= WMI_KEY_TX_USAGE;

			ret = ath10k_install_key(arvif, arvif->wep_keys[i],
						 SET_KEY, addr, flags);
			if (ret < 0)
				return ret;
			break;
		case NL80211_IFTYPE_ADHOC:
			ret = ath10k_install_key(arvif, arvif->wep_keys[i],
						 SET_KEY, addr,
						 WMI_KEY_PAIRWISE);
			if (ret < 0)
				return ret;

			ret = ath10k_install_key(arvif, arvif->wep_keys[i],
						 SET_KEY, addr, WMI_KEY_GROUP);
			if (ret < 0)
				return ret;
			break;
		default:
			WARN_ON(1);
			return -EINVAL;
		}

		spin_lock_bh(&ar->data_lock);
		peer->keys[i] = arvif->wep_keys[i];
		spin_unlock_bh(&ar->data_lock);
	}

	/* In some cases (notably with static WEP IBSS with multiple keys)
	 * multicast Tx becomes broken. Both pairwise and groupwise keys are
	 * installed already. Using WMI_KEY_TX_USAGE in different combinations
	 * didn't seem help. Using def_keyid vdev parameter seems to be
	 * effective so use that.
	 *
	 * FIXME: Revisit. Perhaps this can be done in a less hacky way.
	 */
	if (arvif->vif->type != NL80211_IFTYPE_ADHOC)
		return 0;

	if (arvif->def_wep_key_idx == -1)
		return 0;

	ret = ath10k_wmi_vdev_set_param(arvif->ar,
					arvif->vdev_id,
					arvif->ar->wmi.vdev_param->def_keyid,
					arvif->def_wep_key_idx);
	if (ret) {
		ath10k_warn(ar, "failed to re-set def wpa key idxon vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	return 0;
}

static int ath10k_clear_peer_keys(struct ath10k_vif *arvif,
				  const u8 *addr)
{
	struct ath10k *ar = arvif->ar;
	struct ath10k_peer *peer;
	int first_errno = 0;
	int ret;
	int i;
	u32 flags = 0;

	lockdep_assert_held(&ar->conf_mutex);

	spin_lock_bh(&ar->data_lock);
	peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
	spin_unlock_bh(&ar->data_lock);

	if (!peer)
		return -ENOENT;

	for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
		if (peer->keys[i] == NULL)
			continue;

		/* key flags are not required to delete the key */
		ret = ath10k_install_key(arvif, peer->keys[i],
					 DISABLE_KEY, addr, flags);
		if (ret < 0 && first_errno == 0)
			first_errno = ret;

		if (ret < 0)
			ath10k_warn(ar, "failed to remove peer wep key %d: %d\n",
				    i, ret);

		spin_lock_bh(&ar->data_lock);
		peer->keys[i] = NULL;
		spin_unlock_bh(&ar->data_lock);
	}

	return first_errno;
}

bool ath10k_mac_is_peer_wep_key_set(struct ath10k *ar, const u8 *addr,
				    u8 keyidx)
{
	struct ath10k_peer *peer;
	int i;

	lockdep_assert_held(&ar->data_lock);

	/* We don't know which vdev this peer belongs to,
	 * since WMI doesn't give us that information.
	 *
	 * FIXME: multi-bss needs to be handled.
	 */
	peer = ath10k_peer_find(ar, 0, addr);
	if (!peer)
		return false;

	for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
		if (peer->keys[i] && peer->keys[i]->keyidx == keyidx)
			return true;
	}

	return false;
}

static int ath10k_clear_vdev_key(struct ath10k_vif *arvif,
				 struct ieee80211_key_conf *key)
{
	struct ath10k *ar = arvif->ar;
	struct ath10k_peer *peer;
	u8 addr[ETH_ALEN];
	int first_errno = 0;
	int ret;
	int i;
	u32 flags = 0;

	lockdep_assert_held(&ar->conf_mutex);

	for (;;) {
		/* since ath10k_install_key we can't hold data_lock all the
		 * time, so we try to remove the keys incrementally */
		spin_lock_bh(&ar->data_lock);
		i = 0;
		list_for_each_entry(peer, &ar->peers, list) {
			for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
				if (peer->keys[i] == key) {
					ether_addr_copy(addr, peer->addr);
					peer->keys[i] = NULL;
					break;
				}
			}

			if (i < ARRAY_SIZE(peer->keys))
				break;
		}
		spin_unlock_bh(&ar->data_lock);

		if (i == ARRAY_SIZE(peer->keys))
			break;
		/* key flags are not required to delete the key */
		ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr, flags);
		if (ret < 0 && first_errno == 0)
			first_errno = ret;

		if (ret)
			ath10k_warn(ar, "failed to remove key for %pM: %d\n",
				    addr, ret);
	}

	return first_errno;
}

static int ath10k_mac_vif_update_wep_key(struct ath10k_vif *arvif,
					 struct ieee80211_key_conf *key)
{
	struct ath10k *ar = arvif->ar;
	struct ath10k_peer *peer;
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	list_for_each_entry(peer, &ar->peers, list) {
		if (ether_addr_equal(peer->addr, arvif->vif->addr))
			continue;

		if (ether_addr_equal(peer->addr, arvif->bssid))
			continue;

		if (peer->keys[key->keyidx] == key)
			continue;

		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vif vdev %i update key %i needs update\n",
			   arvif->vdev_id, key->keyidx);

		ret = ath10k_install_peer_wep_keys(arvif, peer->addr);
		if (ret) {
			ath10k_warn(ar, "failed to update wep keys on vdev %i for peer %pM: %d\n",
				    arvif->vdev_id, peer->addr, ret);
			return ret;
		}
	}

	return 0;
}

/*********************/
/* General utilities */
/*********************/

static inline enum wmi_phy_mode
chan_to_phymode(const struct cfg80211_chan_def *chandef)
{
	enum wmi_phy_mode phymode = MODE_UNKNOWN;

	switch (chandef->chan->band) {
	case NL80211_BAND_2GHZ:
		switch (chandef->width) {
		case NL80211_CHAN_WIDTH_20_NOHT:
			if (chandef->chan->flags & IEEE80211_CHAN_NO_OFDM)
				phymode = MODE_11B;
			else
				phymode = MODE_11G;
			break;
		case NL80211_CHAN_WIDTH_20:
			phymode = MODE_11NG_HT20;
			break;
		case NL80211_CHAN_WIDTH_40:
			phymode = MODE_11NG_HT40;
			break;
		case NL80211_CHAN_WIDTH_5:
		case NL80211_CHAN_WIDTH_10:
		case NL80211_CHAN_WIDTH_80:
		case NL80211_CHAN_WIDTH_80P80:
		case NL80211_CHAN_WIDTH_160:
			phymode = MODE_UNKNOWN;
			break;
		}
		break;
	case NL80211_BAND_5GHZ:
		switch (chandef->width) {
		case NL80211_CHAN_WIDTH_20_NOHT:
			phymode = MODE_11A;
			break;
		case NL80211_CHAN_WIDTH_20:
			phymode = MODE_11NA_HT20;
			break;
		case NL80211_CHAN_WIDTH_40:
			phymode = MODE_11NA_HT40;
			break;
		case NL80211_CHAN_WIDTH_80:
			phymode = MODE_11AC_VHT80;
			break;
		case NL80211_CHAN_WIDTH_160:
			phymode = MODE_11AC_VHT160;
			break;
		case NL80211_CHAN_WIDTH_80P80:
			phymode = MODE_11AC_VHT80_80;
			break;
		case NL80211_CHAN_WIDTH_5:
		case NL80211_CHAN_WIDTH_10:
			phymode = MODE_UNKNOWN;
			break;
		}
		break;
	default:
		break;
	}

	WARN_ON(phymode == MODE_UNKNOWN);
	return phymode;
}

static u8 ath10k_parse_mpdudensity(u8 mpdudensity)
{
/*
 * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
 *   0 for no restriction
 *   1 for 1/4 us
 *   2 for 1/2 us
 *   3 for 1 us
 *   4 for 2 us
 *   5 for 4 us
 *   6 for 8 us
 *   7 for 16 us
 */
	switch (mpdudensity) {
	case 0:
		return 0;
	case 1:
	case 2:
	case 3:
	/* Our lower layer calculations limit our precision to
	   1 microsecond */
		return 1;
	case 4:
		return 2;
	case 5:
		return 4;
	case 6:
		return 8;
	case 7:
		return 16;
	default:
		return 0;
	}
}

int ath10k_mac_vif_chan(struct ieee80211_vif *vif,
			struct cfg80211_chan_def *def)
{
	struct ieee80211_chanctx_conf *conf;

	rcu_read_lock();
	conf = rcu_dereference(vif->chanctx_conf);
	if (!conf) {
		rcu_read_unlock();
		return -ENOENT;
	}

	*def = conf->def;
	rcu_read_unlock();

	return 0;
}

static void ath10k_mac_num_chanctxs_iter(struct ieee80211_hw *hw,
					 struct ieee80211_chanctx_conf *conf,
					 void *data)
{
	int *num = data;

	(*num)++;
}

static int ath10k_mac_num_chanctxs(struct ath10k *ar)
{
	int num = 0;

	ieee80211_iter_chan_contexts_atomic(ar->hw,
					    ath10k_mac_num_chanctxs_iter,
					    &num);

	return num;
}

static void
ath10k_mac_get_any_chandef_iter(struct ieee80211_hw *hw,
				struct ieee80211_chanctx_conf *conf,
				void *data)
{
	struct cfg80211_chan_def **def = data;

	*def = &conf->def;
}

static int ath10k_peer_create(struct ath10k *ar,
			      struct ieee80211_vif *vif,
			      struct ieee80211_sta *sta,
			      u32 vdev_id,
			      const u8 *addr,
			      enum wmi_peer_type peer_type)
{
	struct ath10k_vif *arvif;
	struct ath10k_peer *peer;
	int num_peers = 0;
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	num_peers = ar->num_peers;

	/* Each vdev consumes a peer entry as well */
	list_for_each_entry(arvif, &ar->arvifs, list)
		num_peers++;

	if (num_peers >= ar->max_num_peers) {
		ath10k_warn(ar, "failed to create peer %pM for vdev %d, too-many-peers (ar->num_peers: %d  num_peers: %d  max_peers: %d)\n",
			    sta->addr, vdev_id, ar->num_peers, num_peers, ar->max_num_peers);
		return -ENOBUFS;
	}

	ret = ath10k_wmi_peer_create(ar, vdev_id, addr, peer_type);
	if (ret) {
		ath10k_warn(ar, "failed to create wmi peer %pM on vdev %i: %i\n",
			    addr, vdev_id, ret);
		return ret;
	}

	ret = ath10k_wait_for_peer_created(ar, vdev_id, addr);
	if (ret) {
		ath10k_warn(ar, "failed to wait for created wmi peer %pM on vdev %i: %i\n",
			    addr, vdev_id, ret);
		return ret;
	}

	spin_lock_bh(&ar->data_lock);

	peer = ath10k_peer_find(ar, vdev_id, addr);
	if (!peer) {
		spin_unlock_bh(&ar->data_lock);
		ath10k_warn(ar, "failed to find peer %pM on vdev %i after creation\n",
			    addr, vdev_id);
		ath10k_wmi_peer_delete(ar, vdev_id, addr);
		return -ENOENT;
	}

	peer->vif = vif;
	peer->sta = sta;

	spin_unlock_bh(&ar->data_lock);

	ar->num_peers++;

	return 0;
}

int ath10k_mac_set_pdev_kickout(struct ath10k *ar)
{
	u32 param = ar->wmi.pdev_param->sta_kickout_th;
	int rv;

	rv = ath10k_wmi_pdev_set_param(ar, param,
				       ar->sta_xretry_kickout_thresh);
	if (rv) {
		ath10k_warn(ar, "failed to set sta kickout threshold to %d: %d\n",
			    ar->sta_xretry_kickout_thresh, rv);
	}
	return rv;
}

static int ath10k_mac_set_kickout(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;
	u32 param;
	int ret;

	param = ar->wmi.vdev_param->ap_keepalive_min_idle_inactive_time_secs;
	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
					ATH10K_KEEPALIVE_MIN_IDLE);
	if (ret) {
		ath10k_warn(ar, "failed to set keepalive minimum idle time on vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	param = ar->wmi.vdev_param->ap_keepalive_max_idle_inactive_time_secs;
	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
					ATH10K_KEEPALIVE_MAX_IDLE);
	if (ret) {
		ath10k_warn(ar, "failed to set keepalive maximum idle time on vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	param = ar->wmi.vdev_param->ap_keepalive_max_unresponsive_time_secs;
	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
					ATH10K_KEEPALIVE_MAX_UNRESPONSIVE);
	if (ret) {
		ath10k_warn(ar, "failed to set keepalive maximum unresponsive time on vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	return 0;
}

static int ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value)
{
	struct ath10k *ar = arvif->ar;
	u32 vdev_param;

	vdev_param = ar->wmi.vdev_param->rts_threshold;
	return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value);
}

static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr)
{
	int ret;
	int tries = 3;

	lockdep_assert_held(&ar->conf_mutex);

	do {
		ret = ath10k_wmi_peer_delete(ar, vdev_id, addr);
		if (ret)
			return ret;

		ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr);
		if (ret == 0) /* else, try again, maybe FW dropped a msg? */
			break;
	} while (--tries);

	if (ret)
		return ret;

	ar->num_peers--;

	return 0;
}

static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id)
{
	struct ath10k_peer *peer, *tmp;
	int peer_id;
	int i;

	lockdep_assert_held(&ar->conf_mutex);

	spin_lock_bh(&ar->data_lock);
	list_for_each_entry_safe(peer, tmp, &ar->peers, list) {
		if (peer->vdev_id != vdev_id)
			continue;

		ath10k_warn(ar, "removing stale peer %pM from vdev_id %d\n",
			    peer->addr, vdev_id);

		for_each_set_bit(peer_id, peer->peer_ids,
				 ATH10K_MAX_NUM_PEER_IDS) {
			ath10k_warn(ar, "removing peer mapping %pM peer-id: %d\n",
				    peer->addr, peer_id);
			ar->peer_map[peer_id] = NULL;
		}

		/* Double check that peer is properly un-referenced from
		 * the peer_map
		 */
		for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++) {
			if (ar->peer_map[i] == peer) {
				ath10k_warn(ar, "removing stale peer_map entry for %pM (ptr %p idx %d)\n",
					    peer->addr, peer, i);
				ar->peer_map[i] = NULL;
			}
		}

		list_del(&peer->list);
		kfree(peer);
		ar->num_peers--;
	}
	spin_unlock_bh(&ar->data_lock);
}

void ath10k_dump_peer_info(struct ath10k *ar)
{
	struct ath10k_peer *peer;
	int peer_id;

	lockdep_assert_held(&ar->data_lock);

	list_for_each_entry(peer, &ar->peers, list) {
		ath10k_warn(ar, "peer: %p vdev: %d  addr: %pM\n",
			    peer, peer->vdev_id, peer->addr);
		for_each_set_bit(peer_id, peer->peer_ids,
				 ATH10K_MAX_NUM_PEER_IDS) {
			ath10k_warn(ar, "  peer %pM peer-id: %d\n",
				    peer->addr, peer_id);
		}
	}
}

static void ath10k_peer_cleanup_all(struct ath10k *ar)
{
	struct ath10k_peer *peer, *tmp;
	int i;

	lockdep_assert_held(&ar->conf_mutex);

	spin_lock_bh(&ar->data_lock);
	list_for_each_entry_safe(peer, tmp, &ar->peers, list) {
		ath10k_warn(ar, "removing peer, cleanup-all, deleting: peer %p vdev: %d addr: %pM \n",
			    peer, peer->vdev_id, peer->addr);
		list_del(&peer->list);
		kfree(peer);
	}

	for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++)
		ar->peer_map[i] = NULL;

	spin_unlock_bh(&ar->data_lock);

	ar->num_peers = 0;
	ar->num_stations = 0;
}

static int ath10k_mac_tdls_peer_update(struct ath10k *ar, u32 vdev_id,
				       struct ieee80211_sta *sta,
				       enum wmi_tdls_peer_state state)
{
	int ret;
	struct wmi_tdls_peer_update_cmd_arg arg = {};
	struct wmi_tdls_peer_capab_arg cap = {};
	struct wmi_channel_arg chan_arg = {};

	lockdep_assert_held(&ar->conf_mutex);

	arg.vdev_id = vdev_id;
	arg.peer_state = state;
	ether_addr_copy(arg.addr, sta->addr);

	cap.peer_max_sp = sta->max_sp;
	cap.peer_uapsd_queues = sta->uapsd_queues;

	if (state == WMI_TDLS_PEER_STATE_CONNECTED &&
	    !sta->tdls_initiator)
		cap.is_peer_responder = 1;

	ret = ath10k_wmi_tdls_peer_update(ar, &arg, &cap, &chan_arg);
	if (ret) {
		ath10k_warn(ar, "failed to update tdls peer %pM on vdev %i: %i\n",
			    arg.addr, vdev_id, ret);
		return ret;
	}

	return 0;
}

/************************/
/* Interface management */
/************************/

void ath10k_mac_vif_beacon_free(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;

	lockdep_assert_held(&ar->data_lock);

	if (!arvif->beacon)
		return;

	if (!arvif->beacon_buf) {
		ath10k_dbg_dma_map(ar, ATH10K_SKB_CB(arvif->beacon)->paddr, arvif->beacon->len, "unmap: vif-beacon");
		dma_unmap_single(ar->dev, ATH10K_SKB_CB(arvif->beacon)->paddr,
				 arvif->beacon->len, DMA_TO_DEVICE);
	}

	if (WARN_ON(arvif->beacon_state != ATH10K_BEACON_SCHEDULED &&
		    arvif->beacon_state != ATH10K_BEACON_SENT))
		return;

	dev_kfree_skb_any(arvif->beacon);

	arvif->beacon = NULL;
	arvif->beacon_state = ATH10K_BEACON_SCHEDULED;
}

static void ath10k_mac_vif_beacon_cleanup(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;

	lockdep_assert_held(&ar->data_lock);

	ath10k_mac_vif_beacon_free(arvif);

	if (arvif->beacon_buf) {
		dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
				  arvif->beacon_buf, arvif->beacon_paddr);
		arvif->beacon_buf = NULL;
	}
}

static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
{
	unsigned long time_left;

	lockdep_assert_held(&ar->conf_mutex);

	if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags))
		return -ESHUTDOWN;

	time_left = wait_for_completion_timeout(&ar->vdev_setup_done,
						ATH10K_VDEV_SETUP_TIMEOUT_HZ);
	if (time_left == 0)
		return -ETIMEDOUT;

	return 0;
}

static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
{
	struct cfg80211_chan_def *chandef = NULL;
	struct ieee80211_channel *channel = NULL;
	struct wmi_vdev_start_request_arg arg = {};
	int ret = 0;

	lockdep_assert_held(&ar->conf_mutex);

	ieee80211_iter_chan_contexts_atomic(ar->hw,
					    ath10k_mac_get_any_chandef_iter,
					    &chandef);
	if (WARN_ON_ONCE(!chandef))
		return -ENOENT;

	channel = chandef->chan;

	arg.vdev_id = vdev_id;
	arg.channel.freq = channel->center_freq;
	arg.channel.band_center_freq1 = chandef->center_freq1;
	arg.channel.band_center_freq2 = chandef->center_freq2;

	/* TODO setup this dynamically, what in case we
	   don't have any vifs? */
	arg.channel.mode = chan_to_phymode(chandef);
	arg.channel.chan_radar =
			!!(channel->flags & IEEE80211_CHAN_RADAR);

	arg.channel.min_power = 0;
	arg.channel.max_power = channel->max_power * 2;
	arg.channel.max_reg_power = channel->max_reg_power * 2;
	arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;

	reinit_completion(&ar->vdev_setup_done);

	ret = ath10k_wmi_vdev_start(ar, &arg);
	if (ret) {
		ath10k_warn(ar, "failed to request monitor vdev %i start: %d\n",
			    vdev_id, ret);
		return ret;
	}

	ret = ath10k_vdev_setup_sync(ar);
	if (ret) {
		ath10k_warn(ar, "failed to synchronize setup for monitor vdev %i start: %d\n",
			    vdev_id, ret);
		return ret;
	}

	ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr);
	if (ret) {
		ath10k_warn(ar, "failed to put up monitor vdev %i: %d\n",
			    vdev_id, ret);
		goto vdev_stop;
	}

	ar->monitor_vdev_id = vdev_id;

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i started\n",
		   ar->monitor_vdev_id);
	return 0;

vdev_stop:
	ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
	if (ret)
		ath10k_warn(ar, "failed to stop monitor vdev %i after start failure: %d\n",
			    ar->monitor_vdev_id, ret);

	return ret;
}

static int ath10k_monitor_vdev_stop(struct ath10k *ar)
{
	int ret = 0;

	lockdep_assert_held(&ar->conf_mutex);

	ret = ath10k_wmi_vdev_down(ar, ar->monitor_vdev_id);
	if (ret)
		ath10k_warn(ar, "failed to put down monitor vdev %i: %d\n",
			    ar->monitor_vdev_id, ret);

	reinit_completion(&ar->vdev_setup_done);

	ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
	if (ret)
		ath10k_warn(ar, "failed to to request monitor vdev %i stop: %d\n",
			    ar->monitor_vdev_id, ret);

	ret = ath10k_vdev_setup_sync(ar);
	if (ret)
		ath10k_warn(ar, "failed to synchronize monitor vdev %i stop: %d\n",
			    ar->monitor_vdev_id, ret);

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i stopped\n",
		   ar->monitor_vdev_id);
	return ret;
}

static int ath10k_monitor_vdev_create(struct ath10k *ar)
{
	int bit, ret = 0;

	lockdep_assert_held(&ar->conf_mutex);

	if (ar->free_vdev_map == 0) {
		ath10k_warn(ar, "failed to find free vdev id for monitor vdev\n");
		return -ENOMEM;
	}

	bit = __ffs64(ar->free_vdev_map);

	ar->monitor_vdev_id = bit;

	ret = ath10k_wmi_vdev_create(ar, ar->monitor_vdev_id,
				     WMI_VDEV_TYPE_MONITOR,
				     0, ar->mac_addr);
	if (ret) {
		ath10k_warn(ar, "failed to request monitor vdev %i creation: %d\n",
			    ar->monitor_vdev_id, ret);
		return ret;
	}

	ar->free_vdev_map &= ~(1LL << ar->monitor_vdev_id);
	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d created\n",
		   ar->monitor_vdev_id);

	return 0;
}

static int ath10k_monitor_vdev_delete(struct ath10k *ar)
{
	int ret = 0;

	lockdep_assert_held(&ar->conf_mutex);

	ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id);
	if (ret) {
		ath10k_warn(ar, "failed to request wmi monitor vdev %i removal: %d\n",
			    ar->monitor_vdev_id, ret);
		return ret;
	}

	ar->free_vdev_map |= 1LL << ar->monitor_vdev_id;

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n",
		   ar->monitor_vdev_id);
	return ret;
}

static int ath10k_monitor_start(struct ath10k *ar)
{
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	ret = ath10k_monitor_vdev_create(ar);
	if (ret) {
		ath10k_warn(ar, "failed to create monitor vdev: %d\n", ret);
		return ret;
	}

	ret = ath10k_monitor_vdev_start(ar, ar->monitor_vdev_id);
	if (ret) {
		ath10k_warn(ar, "failed to start monitor vdev: %d\n", ret);
		ath10k_monitor_vdev_delete(ar);
		return ret;
	}

	ar->monitor_started = true;
	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor started\n");

	return 0;
}

static int ath10k_monitor_stop(struct ath10k *ar)
{
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	ret = ath10k_monitor_vdev_stop(ar);
	if (ret) {
		ath10k_warn(ar, "failed to stop monitor vdev: %d\n", ret);
		return ret;
	}

	ret = ath10k_monitor_vdev_delete(ar);
	if (ret) {
		ath10k_warn(ar, "failed to delete monitor vdev: %d\n", ret);
		return ret;
	}

	ar->monitor_started = false;
	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor stopped\n");

	return 0;
}

static bool ath10k_mac_monitor_vdev_is_needed(struct ath10k *ar)
{
	int num_ctx;

	/* At least one chanctx is required to derive a channel to start
	 * monitor vdev on.
	 */
	num_ctx = ath10k_mac_num_chanctxs(ar);
	if (num_ctx == 0)
		return false;

	/* If there's already an existing special monitor interface then don't
	 * bother creating another monitor vdev.
	 */
	if (ar->monitor_arvif)
		return false;

	return ar->monitor ||
	       ar->filter_flags & FIF_OTHER_BSS ||
	       test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
}

static bool ath10k_mac_monitor_vdev_is_allowed(struct ath10k *ar)
{
	int num_ctx;

	num_ctx = ath10k_mac_num_chanctxs(ar);

	/* FIXME: Current interface combinations and cfg80211/mac80211 code
	 * shouldn't allow this but make sure to prevent handling the following
	 * case anyway since multi-channel DFS hasn't been tested at all.
	 */
	if (test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags) && num_ctx > 1)
		return false;

	return true;
}

static int ath10k_monitor_recalc(struct ath10k *ar)
{
	bool needed;
	bool allowed;
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	needed = ath10k_mac_monitor_vdev_is_needed(ar);
	allowed = ath10k_mac_monitor_vdev_is_allowed(ar);

	ath10k_dbg(ar, ATH10K_DBG_MAC,
		   "mac monitor recalc started? %d needed? %d allowed? %d\n",
		   ar->monitor_started, needed, allowed);

	if (WARN_ON(needed && !allowed)) {
		if (ar->monitor_started) {
			ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor stopping disallowed monitor\n");

			ret = ath10k_monitor_stop(ar);
			if (ret)
				ath10k_warn(ar, "failed to stop disallowed monitor: %d\n",
					    ret);
				/* not serious */
		}

		return -EPERM;
	}

	if (needed == ar->monitor_started)
		return 0;

	if (needed)
		return ath10k_monitor_start(ar);
	else
		return ath10k_monitor_stop(ar);
}

static int ath10k_recalc_rtscts_prot(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;
	u32 vdev_param, rts_cts = 0;

	lockdep_assert_held(&ar->conf_mutex);

	vdev_param = ar->wmi.vdev_param->enable_rtscts;

	rts_cts |= SM(WMI_RTSCTS_ENABLED, WMI_RTSCTS_SET);

	if (arvif->num_legacy_stations > 0)
		rts_cts |= SM(WMI_RTSCTS_ACROSS_SW_RETRIES,
			      WMI_RTSCTS_PROFILE);
	else
		rts_cts |= SM(WMI_RTSCTS_FOR_SECOND_RATESERIES,
			      WMI_RTSCTS_PROFILE);

	return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
					 rts_cts);
}

static int ath10k_start_cac(struct ath10k *ar)
{
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	set_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);

	ret = ath10k_monitor_recalc(ar);
	if (ret) {
		ath10k_warn(ar, "failed to start monitor (cac): %d\n", ret);
		clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
		return ret;
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac start monitor vdev %d\n",
		   ar->monitor_vdev_id);

	return 0;
}

static int ath10k_stop_cac(struct ath10k *ar)
{
	lockdep_assert_held(&ar->conf_mutex);

	/* CAC is not running - do nothing */
	if (!test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags))
		return 0;

	clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
	ath10k_monitor_stop(ar);

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac finished\n");

	return 0;
}

static void ath10k_mac_has_radar_iter(struct ieee80211_hw *hw,
				      struct ieee80211_chanctx_conf *conf,
				      void *data)
{
	bool *ret = data;

	if (!*ret && conf->radar_enabled)
		*ret = true;
}

static bool ath10k_mac_has_radar_enabled(struct ath10k *ar)
{
	bool has_radar = false;

	ieee80211_iter_chan_contexts_atomic(ar->hw,
					    ath10k_mac_has_radar_iter,
					    &has_radar);

	return has_radar;
}

static void ath10k_recalc_radar_detection(struct ath10k *ar)
{
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	ath10k_stop_cac(ar);

	if (!ath10k_mac_has_radar_enabled(ar))
		return;

	if (ar->num_started_vdevs > 0)
		return;

	ret = ath10k_start_cac(ar);
	if (ret) {
		/*
		 * Not possible to start CAC on current channel so starting
		 * radiation is not allowed, make this channel DFS_UNAVAILABLE
		 * by indicating that radar was detected.
		 */
		ath10k_warn(ar, "failed to start CAC: %d\n", ret);
		ieee80211_radar_detected(ar->hw);
	}
}

static int ath10k_vdev_stop(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	reinit_completion(&ar->vdev_setup_done);

	ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id);
	if (ret) {
		ath10k_warn(ar, "failed to stop WMI vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	ret = ath10k_vdev_setup_sync(ar);
	if (ret) {
		ath10k_warn(ar, "failed to syncronise setup for vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	WARN_ON(ar->num_started_vdevs == 0);

	if (ar->num_started_vdevs != 0) {
		ar->num_started_vdevs--;
		ath10k_recalc_radar_detection(ar);
	}

	return ret;
}

static int ath10k_vdev_start_restart(struct ath10k_vif *arvif,
				     const struct cfg80211_chan_def *chandef,
				     bool restart)
{
	struct ath10k *ar = arvif->ar;
	struct wmi_vdev_start_request_arg arg = {};
	int ret = 0;

	lockdep_assert_held(&ar->conf_mutex);

	reinit_completion(&ar->vdev_setup_done);

	arg.vdev_id = arvif->vdev_id;
	arg.dtim_period = arvif->dtim_period;
	arg.bcn_intval = arvif->beacon_interval;

	arg.channel.freq = chandef->chan->center_freq;
	arg.channel.band_center_freq1 = chandef->center_freq1;
	arg.channel.band_center_freq2 = chandef->center_freq2;
	arg.channel.mode = chan_to_phymode(chandef);

	arg.channel.min_power = 0;
	arg.channel.max_power = chandef->chan->max_power * 2;
	arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
	arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2;

	/* CT Firmware can support 32+ VDEVS, but can only support
	 * beacon-ing devs with dev ids 0 - 31 due to firmware limitations.
	 * Create VAPs first and all should be well...likely most people
	 * won't ever hit this anyway, but some day the vdev ID allocation
	 * could be made smarter to make it more likely to work no matter the
	 * order the vdevs are created. --Ben
	 */
	if ((arvif->vdev_type == WMI_VDEV_TYPE_AP) ||
	    (arvif->vdev_type == WMI_VDEV_TYPE_IBSS)) {
		if (arg.vdev_id > 31) {
			ath10k_warn(ar, "failed to start vdev %i  Beaconing VIFS must have IDs <= 31 to work-around firmware limitations.\n",
				    arg.vdev_id);
			return -EINVAL;
		}
	}

	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
		arg.ssid = arvif->u.ap.ssid;
		arg.ssid_len = arvif->u.ap.ssid_len;
		arg.hidden_ssid = arvif->u.ap.hidden_ssid;

		/* For now allow DFS for AP mode */
		arg.channel.chan_radar =
			!!(chandef->chan->flags & IEEE80211_CHAN_RADAR);
	} else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
		arg.ssid = arvif->vif->bss_conf.ssid;
		arg.ssid_len = arvif->vif->bss_conf.ssid_len;
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC,
		   "mac vdev %d start center_freq %d phymode %s\n",
		   arg.vdev_id, arg.channel.freq,
		   ath10k_wmi_phymode_str(arg.channel.mode));

	if (restart)
		ret = ath10k_wmi_vdev_restart(ar, &arg);
	else
		ret = ath10k_wmi_vdev_start(ar, &arg);

	if (ret) {
		ath10k_warn(ar, "failed to start WMI vdev %i: %d\n",
			    arg.vdev_id, ret);
		return ret;
	}

	ret = ath10k_vdev_setup_sync(ar);
	if (ret) {
		ath10k_warn(ar,
			    "failed to synchronize setup for vdev %i restart %d: %d\n",
			    arg.vdev_id, restart, ret);
		return ret;
	}

	ar->num_started_vdevs++;
	ath10k_recalc_radar_detection(ar);

	return ret;
}

static int ath10k_vdev_start(struct ath10k_vif *arvif,
			     const struct cfg80211_chan_def *def)
{
	return ath10k_vdev_start_restart(arvif, def, false);
}

static int ath10k_vdev_restart(struct ath10k_vif *arvif,
			       const struct cfg80211_chan_def *def)
{
	return ath10k_vdev_start_restart(arvif, def, true);
}

static int ath10k_mac_setup_bcn_p2p_ie(struct ath10k_vif *arvif,
				       struct sk_buff *bcn)
{
	struct ath10k *ar = arvif->ar;
	struct ieee80211_mgmt *mgmt;
	const u8 *p2p_ie;
	int ret;

	if (arvif->vif->type != NL80211_IFTYPE_AP || !arvif->vif->p2p)
		return 0;

	mgmt = (void *)bcn->data;
	p2p_ie = cfg80211_find_vendor_ie(WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
					 mgmt->u.beacon.variable,
					 bcn->len - (mgmt->u.beacon.variable -
						     bcn->data));
	if (!p2p_ie)
		return -ENOENT;

	ret = ath10k_wmi_p2p_go_bcn_ie(ar, arvif->vdev_id, p2p_ie);
	if (ret) {
		ath10k_warn(ar, "failed to submit p2p go bcn ie for vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	return 0;
}

static int ath10k_mac_remove_vendor_ie(struct sk_buff *skb, unsigned int oui,
				       u8 oui_type, size_t ie_offset)
{
	size_t len;
	const u8 *next;
	const u8 *end;
	u8 *ie;

	if (WARN_ON(skb->len < ie_offset))
		return -EINVAL;

	ie = (u8 *)cfg80211_find_vendor_ie(oui, oui_type,
					   skb->data + ie_offset,
					   skb->len - ie_offset);
	if (!ie)
		return -ENOENT;

	len = ie[1] + 2;
	end = skb->data + skb->len;
	next = ie + len;

	if (WARN_ON(next > end))
		return -EINVAL;

	memmove(ie, next, end - next);
	skb_trim(skb, skb->len - len);

	return 0;
}

static int ath10k_mac_setup_bcn_tmpl(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;
	struct ieee80211_hw *hw = ar->hw;
	struct ieee80211_vif *vif = arvif->vif;
	struct ieee80211_mutable_offsets offs = {};
	struct sk_buff *bcn;
	int ret;

	if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
		return 0;

	if (arvif->vdev_type != WMI_VDEV_TYPE_AP &&
	    arvif->vdev_type != WMI_VDEV_TYPE_IBSS)
		return 0;

	bcn = ieee80211_beacon_get_template(hw, vif, &offs);
	if (!bcn) {
		ath10k_warn(ar, "failed to get beacon template from mac80211\n");
		return -EPERM;
	}

	ret = ath10k_mac_setup_bcn_p2p_ie(arvif, bcn);
	if (ret) {
		ath10k_warn(ar, "failed to setup p2p go bcn ie: %d\n", ret);
		kfree_skb(bcn);
		return ret;
	}

	/* P2P IE is inserted by firmware automatically (as configured above)
	 * so remove it from the base beacon template to avoid duplicate P2P
	 * IEs in beacon frames.
	 */
	ath10k_mac_remove_vendor_ie(bcn, WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
				    offsetof(struct ieee80211_mgmt,
					     u.beacon.variable));

	ret = ath10k_wmi_bcn_tmpl(ar, arvif->vdev_id, offs.tim_offset, bcn, 0,
				  0, NULL, 0);
	kfree_skb(bcn);

	if (ret) {
		ath10k_warn(ar, "failed to submit beacon template command: %d\n",
			    ret);
		return ret;
	}

	return 0;
}

static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;
	struct ieee80211_hw *hw = ar->hw;
	struct ieee80211_vif *vif = arvif->vif;
	struct sk_buff *prb;
	int ret;

	if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
		return 0;

	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
		return 0;

	prb = ieee80211_proberesp_get(hw, vif);
	if (!prb) {
		ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
		return -EPERM;
	}

	ret = ath10k_wmi_prb_tmpl(ar, arvif->vdev_id, prb);
	kfree_skb(prb);

	if (ret) {
		ath10k_warn(ar, "failed to submit probe resp template command: %d\n",
			    ret);
		return ret;
	}

	return 0;
}

static int ath10k_mac_vif_fix_hidden_ssid(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;
	struct cfg80211_chan_def def;
	int ret;

	/* When originally vdev is started during assign_vif_chanctx() some
	 * information is missing, notably SSID. Firmware revisions with beacon
	 * offloading require the SSID to be provided during vdev (re)start to
	 * handle hidden SSID properly.
	 *
	 * Vdev restart must be done after vdev has been both started and
	 * upped. Otherwise some firmware revisions (at least 10.2) fail to
	 * deliver vdev restart response event causing timeouts during vdev
	 * syncing in ath10k.
	 *
	 * Note: The vdev down/up and template reinstallation could be skipped
	 * since only wmi-tlv firmware are known to have beacon offload and
	 * wmi-tlv doesn't seem to misbehave like 10.2 wrt vdev restart
	 * response delivery. It's probably more robust to keep it as is.
	 */
	if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
		return 0;

	if (WARN_ON(!arvif->is_started))
		return -EINVAL;

	if (WARN_ON(!arvif->is_up))
		return -EINVAL;

	if (WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def)))
		return -EINVAL;

	ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
	if (ret) {
		ath10k_warn(ar, "failed to bring down ap vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	/* Vdev down reset beacon & presp templates. Reinstall them. Otherwise
	 * firmware will crash upon vdev up.
	 */

	ret = ath10k_mac_setup_bcn_tmpl(arvif);
	if (ret) {
		ath10k_warn(ar, "failed to update beacon template: %d\n", ret);
		return ret;
	}

	ret = ath10k_mac_setup_prb_tmpl(arvif);
	if (ret) {
		ath10k_warn(ar, "failed to update presp template: %d\n", ret);
		return ret;
	}

	ret = ath10k_vdev_restart(arvif, &def);
	if (ret) {
		ath10k_warn(ar, "failed to restart ap vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
				 arvif->bssid);
	if (ret) {
		ath10k_warn(ar, "failed to bring up ap vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	return 0;
}

static void ath10k_control_beaconing(struct ath10k_vif *arvif,
				     struct ieee80211_bss_conf *info)
{
	struct ath10k *ar = arvif->ar;
	int ret = 0;

	lockdep_assert_held(&arvif->ar->conf_mutex);

	if (!info->enable_beacon) {
		ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
		if (ret)
			ath10k_warn(ar, "failed to down vdev_id %i: %d\n",
				    arvif->vdev_id, ret);

		arvif->is_up = false;

		spin_lock_bh(&arvif->ar->data_lock);
		ath10k_mac_vif_beacon_free(arvif);
		spin_unlock_bh(&arvif->ar->data_lock);

		return;
	}

	arvif->tx_seq_no = 0x1000;

	arvif->aid = 0;
	ether_addr_copy(arvif->bssid, info->bssid);

	ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
				 arvif->bssid);
	if (ret) {
		ath10k_warn(ar, "failed to bring up vdev %d: %i\n",
			    arvif->vdev_id, ret);
		return;
	}

	arvif->is_up = true;

	ret = ath10k_mac_vif_fix_hidden_ssid(arvif);
	if (ret) {
		ath10k_warn(ar, "failed to fix hidden ssid for vdev %i, expect trouble: %d\n",
			    arvif->vdev_id, ret);
		return;
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
}

static void ath10k_control_ibss(struct ath10k_vif *arvif,
				struct ieee80211_bss_conf *info,
				const u8 self_peer[ETH_ALEN])
{
	struct ath10k *ar = arvif->ar;
	u32 vdev_param;
	int ret = 0;

	lockdep_assert_held(&arvif->ar->conf_mutex);

	if (!info->ibss_joined) {
		if (is_zero_ether_addr(arvif->bssid))
			return;

		eth_zero_addr(arvif->bssid);

		return;
	}

	vdev_param = arvif->ar->wmi.vdev_param->atim_window;
	ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id, vdev_param,
					ATH10K_DEFAULT_ATIM);
	if (ret)
		ath10k_warn(ar, "failed to set IBSS ATIM for vdev %d: %d\n",
			    arvif->vdev_id, ret);
}

static int ath10k_mac_vif_recalc_ps_wake_threshold(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;
	u32 param;
	u32 value;
	int ret;

	lockdep_assert_held(&arvif->ar->conf_mutex);

	if (arvif->u.sta.uapsd)
		value = WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER;
	else
		value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;

	param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, value);
	if (ret) {
		ath10k_warn(ar, "failed to submit ps wake threshold %u on vdev %i: %d\n",
			    value, arvif->vdev_id, ret);
		return ret;
	}

	return 0;
}

static int ath10k_mac_vif_recalc_ps_poll_count(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;
	u32 param;
	u32 value;
	int ret;

	lockdep_assert_held(&arvif->ar->conf_mutex);

	if (arvif->u.sta.uapsd)
		value = WMI_STA_PS_PSPOLL_COUNT_UAPSD;
	else
		value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;

	param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
					  param, value);
	if (ret) {
		ath10k_warn(ar, "failed to submit ps poll count %u on vdev %i: %d\n",
			    value, arvif->vdev_id, ret);
		return ret;
	}

	return 0;
}

static int ath10k_mac_num_vifs_started(struct ath10k *ar)
{
	struct ath10k_vif *arvif;
	int num = 0;

	lockdep_assert_held(&ar->conf_mutex);

	list_for_each_entry(arvif, &ar->arvifs, list)
		if (arvif->is_started)
			num++;

	return num;
}

static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;
	struct ieee80211_vif *vif = arvif->vif;
	struct ieee80211_conf *conf = &ar->hw->conf;
	enum wmi_sta_powersave_param param;
	enum wmi_sta_ps_mode psmode;
	int ret;
	int ps_timeout;
	bool enable_ps;

	lockdep_assert_held(&arvif->ar->conf_mutex);

	if (arvif->vif->type != NL80211_IFTYPE_STATION)
		return 0;

	enable_ps = arvif->ps;

	if (enable_ps && ath10k_mac_num_vifs_started(ar) > 1 &&
	    !test_bit(ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT,
		      ar->running_fw->fw_file.fw_features)) {
		ath10k_warn(ar, "refusing to enable ps on vdev %i: not supported by fw\n",
			    arvif->vdev_id);
		enable_ps = false;
	}

	if (!arvif->is_started) {
		/* mac80211 can update vif powersave state while disconnected.
		 * Firmware doesn't behave nicely and consumes more power than
		 * necessary if PS is disabled on a non-started vdev. Hence
		 * force-enable PS for non-running vdevs.
		 */
		psmode = WMI_STA_PS_MODE_ENABLED;
	} else if (enable_ps) {
		psmode = WMI_STA_PS_MODE_ENABLED;
		param = WMI_STA_PS_PARAM_INACTIVITY_TIME;

		ps_timeout = conf->dynamic_ps_timeout;
		if (ps_timeout == 0) {
			/* Firmware doesn't like 0 */
			ps_timeout = ieee80211_tu_to_usec(
				vif->bss_conf.beacon_int) / 1000;
		}

		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param,
						  ps_timeout);
		if (ret) {
			ath10k_warn(ar, "failed to set inactivity time for vdev %d: %i\n",
				    arvif->vdev_id, ret);
			return ret;
		}
	} else {
		psmode = WMI_STA_PS_MODE_DISABLED;
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d psmode %s\n",
		   arvif->vdev_id, psmode ? "enable" : "disable");

	ret = ath10k_wmi_set_psmode(ar, arvif->vdev_id, psmode);
	if (ret) {
		ath10k_warn(ar, "failed to set PS Mode %d for vdev %d: %d\n",
			    psmode, arvif->vdev_id, ret);
		return ret;
	}

	return 0;
}

static int ath10k_mac_vif_disable_keepalive(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;
	struct wmi_sta_keepalive_arg arg = {};
	int ret;

	lockdep_assert_held(&arvif->ar->conf_mutex);

	if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
		return 0;

	if (!test_bit(WMI_SERVICE_STA_KEEP_ALIVE, ar->wmi.svc_map))
		return 0;

	/* Some firmware revisions have a bug and ignore the `enabled` field.
	 * Instead use the interval to disable the keepalive.
	 */
	arg.vdev_id = arvif->vdev_id;
	arg.enabled = 1;
	arg.method = WMI_STA_KEEPALIVE_METHOD_NULL_FRAME;
	arg.interval = WMI_STA_KEEPALIVE_INTERVAL_DISABLE;

	ret = ath10k_wmi_sta_keepalive(ar, &arg);
	if (ret) {
		ath10k_warn(ar, "failed to submit keepalive on vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	return 0;
}

static void ath10k_mac_vif_ap_csa_count_down(struct ath10k_vif *arvif)
{
	struct ath10k *ar = arvif->ar;
	struct ieee80211_vif *vif = arvif->vif;
	int ret;

	lockdep_assert_held(&arvif->ar->conf_mutex);

	if (WARN_ON(!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)))
		return;

	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
		return;

	if (!vif->csa_active)
		return;

	if (!arvif->is_up)
		return;

	if (!ieee80211_csa_is_complete(vif)) {
		ieee80211_csa_update_counter(vif);

		ret = ath10k_mac_setup_bcn_tmpl(arvif);
		if (ret)
			ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n",
				    ret);

		ret = ath10k_mac_setup_prb_tmpl(arvif);
		if (ret)
			ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n",
				    ret);
	} else {
		ieee80211_csa_finish(vif);
	}
}

static void ath10k_mac_vif_ap_csa_work(struct work_struct *work)
{
	struct ath10k_vif *arvif = container_of(work, struct ath10k_vif,
						ap_csa_work);
	struct ath10k *ar = arvif->ar;

	mutex_lock(&ar->conf_mutex);
	ath10k_mac_vif_ap_csa_count_down(arvif);
	mutex_unlock(&ar->conf_mutex);
}

static void ath10k_mac_handle_beacon_iter(void *data, u8 *mac,
					  struct ieee80211_vif *vif)
{
	struct sk_buff *skb = data;
	struct ieee80211_mgmt *mgmt = (void *)skb->data;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);

	if (vif->type != NL80211_IFTYPE_STATION)
		return;

	if (!ether_addr_equal(mgmt->bssid, vif->bss_conf.bssid))
		return;

	cancel_delayed_work(&arvif->connection_loss_work);
}

void ath10k_mac_handle_beacon(struct ath10k *ar, struct sk_buff *skb)
{
	ieee80211_iterate_active_interfaces_atomic(ar->hw,
						   IEEE80211_IFACE_ITER_NORMAL,
						   ath10k_mac_handle_beacon_iter,
						   skb);
}

static void ath10k_mac_handle_beacon_miss_iter(void *data, u8 *mac,
					       struct ieee80211_vif *vif)
{
	u32 *vdev_id = data;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct ath10k *ar = arvif->ar;
	struct ieee80211_hw *hw = ar->hw;

	if (arvif->vdev_id != *vdev_id)
		return;

	if (!arvif->is_up)
		return;

	ieee80211_beacon_loss(vif);

	/* Firmware doesn't report beacon loss events repeatedly. If AP probe
	 * (done by mac80211) succeeds but beacons do not resume then it
	 * doesn't make sense to continue operation. Queue connection loss work
	 * which can be cancelled when beacon is received.
	 */
	ieee80211_queue_delayed_work(hw, &arvif->connection_loss_work,
				     ATH10K_CONNECTION_LOSS_HZ);
}

void ath10k_mac_handle_beacon_miss(struct ath10k *ar, u32 vdev_id)
{
	ieee80211_iterate_active_interfaces_atomic(ar->hw,
						   IEEE80211_IFACE_ITER_NORMAL,
						   ath10k_mac_handle_beacon_miss_iter,
						   &vdev_id);
}

static void ath10k_mac_vif_sta_connection_loss_work(struct work_struct *work)
{
	struct ath10k_vif *arvif = container_of(work, struct ath10k_vif,
						connection_loss_work.work);
	struct ieee80211_vif *vif = arvif->vif;

	if (!arvif->is_up)
		return;

	ieee80211_connection_loss(vif);
}

/**********************/
/* Station management */
/**********************/

static u32 ath10k_peer_assoc_h_listen_intval(struct ath10k *ar,
					     struct ieee80211_vif *vif)
{
	/* Some firmware revisions have unstable STA powersave when listen
	 * interval is set too high (e.g. 5). The symptoms are firmware doesn't
	 * generate NullFunc frames properly even if buffered frames have been
	 * indicated in Beacon TIM. Firmware would seldom wake up to pull
	 * buffered frames. Often pinging the device from AP would simply fail.
	 *
	 * As a workaround set it to 1.
	 */
	if (vif->type == NL80211_IFTYPE_STATION)
		return 1;

	return ar->hw->conf.listen_interval;
}

static void ath10k_peer_assoc_h_basic(struct ath10k *ar,
				      struct ieee80211_vif *vif,
				      struct ieee80211_sta *sta,
				      struct wmi_peer_assoc_complete_arg *arg)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	u32 aid;

	lockdep_assert_held(&ar->conf_mutex);

	if (vif->type == NL80211_IFTYPE_STATION)
		aid = vif->bss_conf.aid;
	else
		aid = sta->aid;

	ether_addr_copy(arg->addr, sta->addr);
	arg->vdev_id = arvif->vdev_id;
	arg->peer_aid = aid;
	arg->peer_flags |= arvif->ar->wmi.peer_flags->auth;
	arg->peer_listen_intval = ath10k_peer_assoc_h_listen_intval(ar, vif);
	arg->peer_num_spatial_streams = 1;
	arg->peer_caps = vif->bss_conf.assoc_capability;
}

static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
				       struct ieee80211_vif *vif,
				       struct ieee80211_sta *sta,
				       struct wmi_peer_assoc_complete_arg *arg)
{
	struct ieee80211_bss_conf *info = &vif->bss_conf;
	struct cfg80211_chan_def def;
	struct cfg80211_bss *bss;
	const u8 *rsnie = NULL;
	const u8 *wpaie = NULL;

	lockdep_assert_held(&ar->conf_mutex);

	if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
		return;

	bss = cfg80211_get_bss(ar->hw->wiphy, def.chan, info->bssid, NULL, 0,
			       IEEE80211_BSS_TYPE_ANY, IEEE80211_PRIVACY_ANY);
	if (bss) {
		const struct cfg80211_bss_ies *ies;

		rcu_read_lock();
		rsnie = ieee80211_bss_get_ie(bss, WLAN_EID_RSN);

		ies = rcu_dereference(bss->ies);

		wpaie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
						WLAN_OUI_TYPE_MICROSOFT_WPA,
						ies->data,
						ies->len);
		rcu_read_unlock();
		cfg80211_put_bss(ar->hw->wiphy, bss);
	}

	/* FIXME: base on RSN IE/WPA IE is a correct idea? */
	if (rsnie || wpaie) {
		ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__);
		arg->peer_flags |= ar->wmi.peer_flags->need_ptk_4_way;
	}

	if (wpaie) {
		ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__);
		arg->peer_flags |= ar->wmi.peer_flags->need_gtk_2_way;
	}

	if (sta->mfp &&
	    test_bit(ATH10K_FW_FEATURE_MFP_SUPPORT,
		     ar->running_fw->fw_file.fw_features)) {
		arg->peer_flags |= ar->wmi.peer_flags->pmf;
	}
}

static void ath10k_peer_assoc_h_rates(struct ath10k *ar,
				      struct ieee80211_vif *vif,
				      struct ieee80211_sta *sta,
				      struct wmi_peer_assoc_complete_arg *arg)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates;
	struct cfg80211_chan_def def;
	const struct ieee80211_supported_band *sband;
	const struct ieee80211_rate *rates;
	enum nl80211_band band;
	u32 ratemask;
	u8 rate;
	int i;

	lockdep_assert_held(&ar->conf_mutex);

	if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
		return;

	band = def.chan->band;
	sband = ar->hw->wiphy->bands[band];
	ratemask = sta->supp_rates[band];
	ratemask &= arvif->bitrate_mask.control[band].legacy;
	rates = sband->bitrates;

	rateset->num_rates = 0;

	for (i = 0; i < 32; i++, ratemask >>= 1, rates++) {
		if (!(ratemask & 1))
			continue;

		rate = ath10k_mac_bitrate_to_rate(rates->bitrate);
		rateset->rates[rateset->num_rates] = rate;
		rateset->num_rates++;
	}
}

static bool
ath10k_peer_assoc_h_ht_masked(const u8 ht_mcs_mask[IEEE80211_HT_MCS_MASK_LEN])
{
	int nss;

	for (nss = 0; nss < IEEE80211_HT_MCS_MASK_LEN; nss++)
		if (ht_mcs_mask[nss])
			return false;

	return true;
}

static bool
ath10k_peer_assoc_h_vht_masked(const u16 vht_mcs_mask[NL80211_VHT_NSS_MAX])
{
	int nss;

	for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++)
		if (vht_mcs_mask[nss])
			return false;

	return true;
}

static void ath10k_set_rate_enabled(int rix, u8 *rt_array, int val) {
	int idx = rix / 8;
	int bit = rix - (idx * 8);

	//pr_err(" rix: %d  idx: %d  bit: %d\n", rix, idx, bit);
	if (WARN_ON_ONCE(idx >= RATE_OVERRIDES_COUNT))
		return;

	if (val) {
		rt_array[idx] |= (1<<bit);
	}
	else {
		rt_array[idx] &= ~(1<<bit);
	}
}

static void ath10k_peer_assoc_h_rate_overrides(struct ath10k *ar,
					       struct ieee80211_vif *vif,
					       struct ieee80211_sta *sta,
					       struct wmi_peer_assoc_complete_arg *arg)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	const struct ieee80211_supported_band *sband;
	const struct ieee80211_rate *rates;
	struct cfg80211_chan_def def;
	enum nl80211_band band;
	u32 ratemask;
	int i;
	int j;
	int hw_rix;
	bool ok160 = false;

	/* So, what we really want here is the max number of chains the firmware
	 * is compiled for.  But, since we can have 3x3 firmware run on 2x2 chips,
	 * then we need to hack on this in gruesome ways.  Better have the hack here
	 * than try to extend FW's ability to send that value I think.
	 */
	int hw_nss = ar->num_rf_chains;
	if (! test_bit(ATH10K_FW_FEATURE_CT_RATEMASK,
		       ar->running_fw->fw_file.fw_features))
		return;

	/* Ignore devices not known to be supported, this is a minor feature and
	 * not worth breaking systems for users that don't need it.
	 */
	if (!((ar->dev_id == QCA9887_1_0_DEVICE_ID) ||
	      (ar->dev_id == QCA988X_2_0_DEVICE_ID) ||
	      (ar->dev_id == QCA9888_2_0_DEVICE_ID) || /* Wave-2 2x2 MU-MIMO NIC */
	      (ar->dev_id == QCA99X0_2_0_DEVICE_ID) ||
	      (ar->dev_id == QCA9984_1_0_DEVICE_ID))) {
		ath10k_warn(ar, "rate-override:  Skipping un-supported device-id, hw-nss: %d dev-id: 0x%x\n",
			    hw_nss, ar->dev_id);
		return;
	}

	if ((ar->dev_id == QCA9984_1_0_DEVICE_ID) ||
	    (ar->dev_id == QCA9888_2_0_DEVICE_ID)) {
		ok160 = true;
	}

	if (hw_nss < 3) {
		/* Maybe 2x2 NIC booting 3x3 988x firmware? */
		/* 9887 is weird, NSS = 1, but FW rate-table is compiled for 3x3 evidently */
		if ((ar->dev_id == QCA988X_2_0_DEVICE_ID) ||
		    (ar->dev_id == QCA9887_1_0_DEVICE_ID)) {
			hw_nss = 3;
		}
	}

	lockdep_assert_held(&ar->conf_mutex);

	if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
		return;

	band = def.chan->band;
	sband = ar->hw->wiphy->bands[band];
	ratemask = arvif->bitrate_mask.control[band].legacy;
	rates = sband->bitrates;

	ath10k_dbg(ar, ATH10K_DBG_MAC2, "band: %d  ratemask: 0x%x  hw-nss: %d dev-id: 0x%x\n",
		    band, ratemask, hw_nss, ar->dev_id);

	arg->has_rate_overrides = true;

	/* Clear the rateset */
	memset(arg->rate_overrides, 0x0, sizeof(arg->rate_overrides));

	/* Legacy rates */
	for (i = 0; i < sband->n_bitrates; i++, ratemask >>= 1, rates++) {
		if (!(ratemask & 1))
			continue;

		if (ath10k_mac_bitrate_is_cck(rates->bitrate)) {
			hw_rix = rates->hw_value;
		}
		else {
			/* ofdm rates start at rix 4 */
			hw_rix = rates->hw_value + 4;
		}
		ath10k_dbg(ar, ATH10K_DBG_MAC2,
			   "set-enabled, bitrate: %d  i: %d  hw-value: %d hw-rix: %d\n",
			   rates->bitrate, i, rates->hw_value, hw_rix);
		ath10k_set_rate_enabled(hw_rix, arg->rate_overrides, 1);
	}

	/* HT rate logic (ath10k AR98XX, at least, uses 3x3 rateset).  First set
	 * of 3 is HT20, second set is HT40.  No way to specify HT20 vs HT40
	 * using normal rate-set info as far as I can tell, so set both to the
	 * same value.
	 */
	for (i = 0; i < hw_nss; i++) {
		unsigned int mcs = arvif->bitrate_mask.control[band].ht_mcs[i];
		ath10k_dbg(ar, ATH10K_DBG_MAC2, "ht-mcs [%i]: 0x%x\n", i, mcs);
		for (j = 0; j<8; j++) {
			if (mcs & (1<<j)) {
				hw_rix = 12 + i * 8 + j;
				ath10k_dbg(ar, ATH10K_DBG_MAC2,
					   "set-enabled, ht: hw-rix: %d, %d  i: %d j: %d\n",
					   hw_rix, hw_rix + hw_nss * 8, i, j);
				ath10k_set_rate_enabled(hw_rix, arg->rate_overrides, 1);
				/* Set HT40 rateset too */
				ath10k_set_rate_enabled(hw_rix + hw_nss * 8, arg->rate_overrides, 1);
			}
		}
	}

	/* VHT rate logic (ath10k AR98XX, at least, uses 3x3 rateset).
	 * One set of rates for each of 20, 40, 80Mhz bandwidth.
	 * Each set has 10 rates for each of 1, 2, and 3 streams.
	 * No way to specify HT20 vs HT40 vs HT80
	 * using normal rate-set info as far as I can tell, so set all three to the
	 * same value.
	 */
	/* NOTE: VHT has some illegal rates (VHT-20 MCS 9 at 1x1 and 2x2, and MCS6 at VHT-80).  If user has
	 * specified only these rates, then the rateset for that bandwidth will be null, and that will
	 * crash the firmware.  So, try to set the nearest thing.
	 */


	for (i = 0; i < hw_nss; i++) {
		unsigned int mcs = arvif->bitrate_mask.control[band].vht_mcs[i];
		ath10k_dbg(ar, ATH10K_DBG_MAC2, "vht-mcs [%i]: 0x%x\n", i, mcs);
		for (j = 0; j<10; j++) {
			if (mcs & (1<<j)) {
				int hw_rix_20_40, hw_rix_80;
				hw_rix = 12 + (hw_nss * 2) * 8 + i * 10 + j;
				hw_rix_20_40 = hw_rix;
				hw_rix_80 = hw_rix;
				if ((i < 2) && (j == 9)) {
					/* Requested invalid rate:  mcs-9 for 1x1 or 2x2, use nearest. */
					hw_rix_20_40 = 12 + (hw_nss * 2) * 8 + i * 10 + 8;
				}
				if ((i == 2) && (j == 6)) {
					/* Requested invalid rate:  mcs-6 for 80Mhz, use nearest. */
					hw_rix_80 = 12 + (hw_nss * 2) * 8 + i * 10 + 5;
				}
				ath10k_dbg(ar, ATH10K_DBG_MAC2,
					   "set-enabled, vht: hw-rix-20-40: %d, hw-rix-80: %d  orig-hw-rix: %d  %d, %d  i: %d j: %d\n",
					   hw_rix_20_40, hw_rix_80, hw_rix, hw_rix + hw_nss * 10, hw_rix + hw_nss * 2 * 10, i, j);
				ath10k_set_rate_enabled(hw_rix_20_40, arg->rate_overrides, 1);
				/* Set HT40 rateset too */
				ath10k_set_rate_enabled(hw_rix_20_40 + hw_nss * 10, arg->rate_overrides, 1);
				/* Set HT80 rateset too */
				ath10k_set_rate_enabled(hw_rix_80 + hw_nss * 2 * 10, arg->rate_overrides, 1);
				/* And for NICs that support 160Mhz, set those */
				if (ok160)
					ath10k_set_rate_enabled(hw_rix + hw_nss * 3 * 10, arg->rate_overrides, 1);
			}
		}
	}

	for (i = 0; i < sizeof(arg->rate_overrides); i++) {
		if (arg->rate_overrides[i] != 0xFF) {
			ath10k_dbg(ar, ATH10K_DBG_MAC2, "vif: %d rate-overrides[%d]: 0x%x\n",
				   arvif->vdev_id, i, arg->rate_overrides[i]);
		}
	}
}

static u8 get_nss_from_chainmask(u16 chain_mask)
{
	if ((chain_mask & 0xf) == 0xf)
		return 4;
	else if ((chain_mask & 0x7) == 0x7)
		return 3;
	else if ((chain_mask & 0x3) == 0x3)
		return 2;
	return 1;
}

static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
				   struct ieee80211_vif *vif,
				   struct ieee80211_sta *sta,
				   struct wmi_peer_assoc_complete_arg *arg)
{
	const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct cfg80211_chan_def def;
	enum nl80211_band band;
	const u8 *ht_mcs_mask;
	const u16 *vht_mcs_mask;
	int i, n;
	u8 max_nss;
	u32 stbc;

	lockdep_assert_held(&ar->conf_mutex);

	if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
		return;

	if (!ht_cap->ht_supported)
		return;

	/* TODO:  We need to have a distinction between tx bitrate
	 * masks and advertised bitrate masks.  This code is trying
	 * to use tx bitrate as advertised bitrate, and that causes
	 * some problems and/or requires hack-arounds. --Ben
	 */
	band = def.chan->band;
	ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs;
	vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs;

	if (ath10k_peer_assoc_h_ht_masked(ht_mcs_mask) &&
	    ath10k_peer_assoc_h_vht_masked(vht_mcs_mask))
		return;

	arg->peer_flags |= ar->wmi.peer_flags->ht;
	arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
				    ht_cap->ampdu_factor)) - 1;

	arg->peer_mpdu_density =
		ath10k_parse_mpdudensity(ht_cap->ampdu_density);

	arg->peer_ht_caps = ht_cap->cap;
	arg->peer_rate_caps |= WMI_RC_HT_FLAG;

	if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)
		arg->peer_flags |= ar->wmi.peer_flags->ldbc;

	if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) {
		arg->peer_flags |= ar->wmi.peer_flags->bw40;
		arg->peer_rate_caps |= WMI_RC_CW40_FLAG;
	}

	if (arvif->bitrate_mask.control[band].gi != NL80211_TXRATE_FORCE_LGI) {
		if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20)
			arg->peer_rate_caps |= WMI_RC_SGI_FLAG;

		if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40)
			arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
	}

	if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) {
		arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG;
		arg->peer_flags |= ar->wmi.peer_flags->stbc;
	}

	if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) {
		stbc = ht_cap->cap & IEEE80211_HT_CAP_RX_STBC;
		stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT;
		stbc = stbc << WMI_RC_RX_STBC_FLAG_S;
		arg->peer_rate_caps |= stbc;
		arg->peer_flags |= ar->wmi.peer_flags->stbc;
	}

	if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2])
		arg->peer_rate_caps |= WMI_RC_TS_FLAG;
	else if (ht_cap->mcs.rx_mask[1])
		arg->peer_rate_caps |= WMI_RC_DS_FLAG;

	for (i = 0, n = 0, max_nss = 0; i < IEEE80211_HT_MCS_MASK_LEN * 8; i++)
		if ((ht_cap->mcs.rx_mask[i / 8] & BIT(i % 8)) &&
		    (ht_mcs_mask[i / 8] & BIT(i % 8))) {
			max_nss = (i / 8) + 1;
			arg->peer_ht_rates.rates[n++] = i;
		}

	/* User may have used 'iw' or similar to configure VHT rates
	 * and no HT rates.  In that case, our NSS would be incorrect
	 * without this code below.
	 */
	for (i = max_nss; i < NL80211_VHT_NSS_MAX; i++) {
		ath10k_dbg(ar, ATH10K_DBG_MAC, "max-nss: %d i: %d mask: 0x%x\n",
			   max_nss, i, vht_mcs_mask[i]);
		if (vht_mcs_mask[i])
			max_nss = i + 1;
	}
	max_nss = min(max_nss, get_nss_from_chainmask(ar->cfg_tx_chainmask));

	/*
	 * This is a workaround for HT-enabled STAs which break the spec
	 * and have no HT capabilities RX mask (no HT RX MCS map).
	 *
	 * As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
	 * MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.
	 *
	 * Firmware asserts if such situation occurs.
	 *
	 * CT Firmware with the RATEMASK feature flag does NOT assert and handles
	 * this just fine, so no work-arounds for it. --Ben
	 */
	if (n == 0 && !test_bit(ATH10K_FW_FEATURE_CT_RATEMASK,
				ar->running_fw->fw_file.fw_features)) {
		arg->peer_ht_rates.num_rates = 8;
		for (i = 0; i < arg->peer_ht_rates.num_rates; i++)
			arg->peer_ht_rates.rates[i] = i;
	} else {
		arg->peer_ht_rates.num_rates = n;
		arg->peer_num_spatial_streams = min(sta->rx_nss, max_nss);
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
		   arg->addr,
		   arg->peer_ht_rates.num_rates,
		   arg->peer_num_spatial_streams);
}

static int ath10k_peer_assoc_qos_ap(struct ath10k *ar,
				    struct ath10k_vif *arvif,
				    struct ieee80211_sta *sta)
{
	u32 uapsd = 0;
	u32 max_sp = 0;
	int ret = 0;

	lockdep_assert_held(&ar->conf_mutex);

	if (sta->wme && sta->uapsd_queues) {
		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n",
			   sta->uapsd_queues, sta->max_sp);

		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
			uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN |
				 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN;
		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
			uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN |
				 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN;
		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
			uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN |
				 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN;
		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
			uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN |
				 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN;

		if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP)
			max_sp = sta->max_sp;

		ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
						 sta->addr,
						 WMI_AP_PS_PEER_PARAM_UAPSD,
						 uapsd);
		if (ret) {
			ath10k_warn(ar, "failed to set ap ps peer param uapsd for vdev %i: %d\n",
				    arvif->vdev_id, ret);
			return ret;
		}

		ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
						 sta->addr,
						 WMI_AP_PS_PEER_PARAM_MAX_SP,
						 max_sp);
		if (ret) {
			ath10k_warn(ar, "failed to set ap ps peer param max sp for vdev %i: %d\n",
				    arvif->vdev_id, ret);
			return ret;
		}

		/* TODO setup this based on STA listen interval and
		   beacon interval. Currently we don't know
		   sta->listen_interval - mac80211 patch required.
		   Currently use 10 seconds */
		ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, sta->addr,
						 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME,
						 10);
		if (ret) {
			ath10k_warn(ar, "failed to set ap ps peer param ageout time for vdev %i: %d\n",
				    arvif->vdev_id, ret);
			return ret;
		}
	}

	return 0;
}

static u16
ath10k_peer_assoc_h_vht_limit(struct ath10k *ar, u16 tx_mcs_set,
			      const u16 vht_mcs_limit[NL80211_VHT_NSS_MAX])
{
	int idx_limit;
	int nss;
	u16 mcs_map;
	u16 mcs;

	for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++) {
		mcs_map = ath10k_mac_get_max_vht_mcs_map(tx_mcs_set, nss) &
			  vht_mcs_limit[nss];

		if (mcs_map)
			idx_limit = fls(mcs_map) - 1;
		else
			idx_limit = -1;

		switch (idx_limit) {
		case 0: /* fall through */
		case 1: /* fall through */
		case 2: /* fall through */
		case 3: /* fall through */
		case 4: /* fall through */
		case 5: /* fall through */
		case 6: /* fall through */
		default:
			if (test_bit(ATH10K_FW_FEATURE_CT_RATEMASK,
				     ar->running_fw->fw_file.fw_features)) {
				mcs = IEEE80211_VHT_MCS_SUPPORT_0_7;
				break;
			}
			/* see ath10k_mac_can_set_bitrate_mask() */
			WARN_ON(1);
			/* fall through */
		case -1:
			mcs = IEEE80211_VHT_MCS_NOT_SUPPORTED;
			break;
		case 7:
			mcs = IEEE80211_VHT_MCS_SUPPORT_0_7;
			break;
		case 8:
			mcs = IEEE80211_VHT_MCS_SUPPORT_0_8;
			break;
		case 9:
			mcs = IEEE80211_VHT_MCS_SUPPORT_0_9;
			break;
		}

		tx_mcs_set &= ~(0x3 << (nss * 2));
		tx_mcs_set |= mcs << (nss * 2);
	}

	return tx_mcs_set;
}

static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
				    struct ieee80211_vif *vif,
				    struct ieee80211_sta *sta,
				    struct wmi_peer_assoc_complete_arg *arg)
{
	const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct cfg80211_chan_def def;
	enum nl80211_band band;
	const u16 *vht_mcs_mask;
	u8 ampdu_factor;

	if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
		return;

	if (!vht_cap->vht_supported)
		return;

	band = def.chan->band;
	vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs;

	if (ath10k_peer_assoc_h_vht_masked(vht_mcs_mask))
		return;

	arg->peer_flags |= ar->wmi.peer_flags->vht;

	if (def.chan->band == NL80211_BAND_2GHZ)
		arg->peer_flags |= ar->wmi.peer_flags->vht_2g;

	arg->peer_vht_caps = vht_cap->cap;

	ampdu_factor = (vht_cap->cap &
			IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >>
		       IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;

	/* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to
	 * zero in VHT IE. Using it would result in degraded throughput.
	 * arg->peer_max_mpdu at this point contains HT max_mpdu so keep
	 * it if VHT max_mpdu is smaller. */
	arg->peer_max_mpdu = max(arg->peer_max_mpdu,
				 (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR +
					ampdu_factor)) - 1);

	if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
		arg->peer_flags |= ar->wmi.peer_flags->bw80;

	if (sta->bandwidth == IEEE80211_STA_RX_BW_160)
		arg->peer_flags |= ar->wmi.peer_flags->bw160;

	arg->peer_vht_rates.rx_max_rate =
		__le16_to_cpu(vht_cap->vht_mcs.rx_highest);
	arg->peer_vht_rates.rx_mcs_set =
		__le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map);
	arg->peer_vht_rates.tx_max_rate =
		__le16_to_cpu(vht_cap->vht_mcs.tx_highest);
	arg->peer_vht_rates.tx_mcs_set = ath10k_peer_assoc_h_vht_limit(
		ar, __le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask);

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x rx-max-rate: 0x%x rx-mcs: 0x%x tx-max-rate: 0x%x tx-mcs: 0x%x\n",
		   sta->addr, arg->peer_max_mpdu, arg->peer_flags,
		   arg->peer_vht_rates.rx_max_rate, arg->peer_vht_rates.rx_mcs_set,
		   arg->peer_vht_rates.tx_max_rate, arg->peer_vht_rates.tx_mcs_set);

	if ((arg->peer_vht_rates.rx_max_rate) &&
	    (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK)) {
		if ((arg->peer_num_spatial_streams > 1) &&
		    (arg->peer_vht_rates.rx_max_rate == 1560)) {
			/* Must be 2x2 at 160Mhz is all it can do. */
			arg->peer_bw_rxnss_override = 2;
		}
		else if (arg->peer_vht_rates.rx_max_rate == 780) {
			/* Can only do 1x2 at 160Mhz (Long Guard Interval) */
			arg->peer_bw_rxnss_override = 1;
		}
	}
}

static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
				    struct ieee80211_vif *vif,
				    struct ieee80211_sta *sta,
				    struct wmi_peer_assoc_complete_arg *arg)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);

	switch (arvif->vdev_type) {
	case WMI_VDEV_TYPE_AP:
		if (sta->wme)
			arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;

		if (sta->wme && sta->uapsd_queues) {
			arg->peer_flags |= arvif->ar->wmi.peer_flags->apsd;
			arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG;
		}
		break;
	case WMI_VDEV_TYPE_STA:
		if (vif->bss_conf.qos)
			arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
		break;
	case WMI_VDEV_TYPE_IBSS:
		if (sta->wme)
			arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
		break;
	default:
		break;
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n",
		   sta->addr, !!(arg->peer_flags &
		   arvif->ar->wmi.peer_flags->qos));
}

static bool ath10k_mac_vif_has_any_cck(struct ath10k *ar,
				       struct ieee80211_vif *vif,
				       u8 bandmask)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	u32 msk = 0;
	int i;
	for (i = 0; i < NUM_NL80211_BANDS; i++) {
		if (bandmask & (1 << i)) {
			msk |= arvif->bitrate_mask.control[i].legacy;
		}
	}
	/* Only 2Ghz band has CCK support */
	/* We have 12 bits of legacy rates, first 4 are /b (CCK) rates. */
	ath10k_dbg(ar, ATH10K_DBG_MAC, "has-any-cck, arvif-legacy-24: 0x%x  mask: 0x%x\n",
		   arvif->bitrate_mask.control[NL80211_BAND_2GHZ].legacy,
		   msk);
	return (msk & 0xf);
}

static bool ath10k_mac_vif_has_any_ofdm(struct ath10k *ar,
					struct ieee80211_vif *vif,
					int bandmask)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	u32 msk = 0;
	int i;
	for (i = 0; i < NUM_NL80211_BANDS; i++) {
		if (bandmask & (1 << i)) {
			msk |= arvif->bitrate_mask.control[i].legacy;
		}
	}
	/* We have 12 bits of legacy rates, first 4 are /b (CCK) rates. */
	ath10k_dbg(ar, ATH10K_DBG_MAC, "has-any-ofdm, arvif-legacy-24: 0x%x  legacy-5: 0x%x  mask: 0x%x\n",
		   arvif->bitrate_mask.control[NL80211_BAND_2GHZ].legacy,
		   arvif->bitrate_mask.control[NL80211_BAND_5GHZ].legacy,
		   msk);
	return (msk & 0xff0);
}

static bool ath10k_mac_vif_has_any_ht(struct ath10k *ar, struct ieee80211_vif *vif)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	int i;
	for (i = 0; i<IEEE80211_HT_MCS_MASK_LEN; i++) {
		if (arvif->bitrate_mask.control[NL80211_BAND_2GHZ].ht_mcs[i] ||
		    arvif->bitrate_mask.control[NL80211_BAND_5GHZ].ht_mcs[i]) {
			ath10k_dbg(ar, ATH10K_DBG_MAC, "has-any-ht, i: %d  2.4: 0x%x  5: 0x%x\n",
				   i, arvif->bitrate_mask.control[NL80211_BAND_2GHZ].ht_mcs[i],
				   arvif->bitrate_mask.control[NL80211_BAND_5GHZ].ht_mcs[i]);
			return true;
		}
	}
	ath10k_dbg(ar, ATH10K_DBG_MAC, "No HT rates enabled.\n");
	return false;
}

static bool ath10k_mac_vif_has_any_vht(struct ath10k *ar, struct ieee80211_vif *vif)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	int i;
	for (i = 0; i<ARRAY_SIZE(arvif->bitrate_mask.control[NL80211_BAND_2GHZ].vht_mcs); i++) {
		if (arvif->bitrate_mask.control[NL80211_BAND_2GHZ].vht_mcs[i] ||
		    arvif->bitrate_mask.control[NL80211_BAND_5GHZ].vht_mcs[i]) {
			ath10k_dbg(ar, ATH10K_DBG_MAC, "has-any-vht, i: %d  2.4: 0x%x  5: 0x%x\n",
				   i, arvif->bitrate_mask.control[NL80211_BAND_2GHZ].vht_mcs[i],
				   arvif->bitrate_mask.control[NL80211_BAND_5GHZ].vht_mcs[i]);
			return true;
		}
	}
	ath10k_dbg(ar, ATH10K_DBG_MAC, "No VHT rates enabled.\n");
	return false;
}

static bool ath10k_mac_sta_has_ofdm_only(struct ieee80211_vif *vif,
					 struct ieee80211_sta *sta)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	u32 msk = arvif->bitrate_mask.control[NL80211_BAND_2GHZ].legacy &
		sta->supp_rates[NL80211_BAND_2GHZ];
	/* We have 12 bits of legacy rates, first 4 are /b (CCK) rates. */
	return (msk & 0xff0) && !(msk & 0xf);
}

static bool ath10k_mac_sta_has_ofdm_and_cck(struct ieee80211_vif *vif,
					    struct ieee80211_sta *sta)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	u32 msk = arvif->bitrate_mask.control[NL80211_BAND_2GHZ].legacy &
		sta->supp_rates[NL80211_BAND_2GHZ];
	/* We have 12 bits of legacy rates, first 4 are /b (CCK) rates. */
	return ((msk & 0xf) && (msk & 0xff0));
}

static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
					struct ieee80211_vif *vif,
					struct ieee80211_sta *sta,
					struct wmi_peer_assoc_complete_arg *arg)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct cfg80211_chan_def def;
	enum nl80211_band band;
	const u8 *ht_mcs_mask;
	const u16 *vht_mcs_mask;
	enum wmi_phy_mode phymode = MODE_UNKNOWN;

	if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
		return;

	band = def.chan->band;
	ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs;
	vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs;

	switch (band) {
	case NL80211_BAND_2GHZ:
		if (sta->vht_cap.vht_supported &&
		    !ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) {
			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
				phymode = MODE_11AC_VHT40;
			else
				phymode = MODE_11AC_VHT20;
		} else if (sta->ht_cap.ht_supported &&
			   !ath10k_peer_assoc_h_ht_masked(ht_mcs_mask)) {
			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
				phymode = MODE_11NG_HT40;
			else
				phymode = MODE_11NG_HT20;
		} else if (ath10k_mac_sta_has_ofdm_and_cck(vif, sta)) {
			phymode = MODE_11G;
		} else if (ath10k_mac_sta_has_ofdm_only(vif, sta)) {
			phymode = MODE_11GONLY;
		} else {
			phymode = MODE_11B;
		}

		break;
	case NL80211_BAND_5GHZ:
		/*
		 * Check VHT first.
		 */
		if (sta->vht_cap.vht_supported &&
		    !ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) {
			if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
				phymode = MODE_11AC_VHT80;
			else if (sta->bandwidth == IEEE80211_STA_RX_BW_160) {
				phymode = MODE_11AC_VHT160;
				switch (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
				case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
					phymode = MODE_11AC_VHT160;
				break;
				case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ:
					phymode = MODE_11AC_VHT80_80;
				break;
				}
			} else if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
				phymode = MODE_11AC_VHT40;
			else if (sta->bandwidth == IEEE80211_STA_RX_BW_20)
				phymode = MODE_11AC_VHT20;
		} else if (sta->ht_cap.ht_supported &&
			   !ath10k_peer_assoc_h_ht_masked(ht_mcs_mask)) {
			if (sta->bandwidth >= IEEE80211_STA_RX_BW_40)
				phymode = MODE_11NA_HT40;
			else
				phymode = MODE_11NA_HT20;
		} else {
			phymode = MODE_11A;
		}

		break;
	default:
		break;
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM phymode %s  legacy-supp-rates: 0x%x  arvif-legacy-rates: 0x%x vht-supp: %d\n",
		   sta->addr, ath10k_wmi_phymode_str(phymode), sta->supp_rates[band],
		   arvif->bitrate_mask.control[band].legacy, sta->vht_cap.vht_supported);

	arg->peer_phymode = phymode;
	WARN_ON(phymode == MODE_UNKNOWN);
}

static int ath10k_peer_assoc_prepare(struct ath10k *ar,
				     struct ieee80211_vif *vif,
				     struct ieee80211_sta *sta,
				     struct wmi_peer_assoc_complete_arg *arg)
{
	lockdep_assert_held(&ar->conf_mutex);

	memset(arg, 0, sizeof(*arg));

	ath10k_peer_assoc_h_basic(ar, vif, sta, arg);
	ath10k_peer_assoc_h_crypto(ar, vif, sta, arg);
	ath10k_peer_assoc_h_rates(ar, vif, sta, arg);
	ath10k_peer_assoc_h_ht(ar, vif, sta, arg);
	ath10k_peer_assoc_h_vht(ar, vif, sta, arg);
	ath10k_peer_assoc_h_qos(ar, vif, sta, arg);
	ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);

	ath10k_peer_assoc_h_rate_overrides(ar, vif, sta, arg);

	return 0;
}

static const u32 ath10k_smps_map[] = {
	[WLAN_HT_CAP_SM_PS_STATIC] = WMI_PEER_SMPS_STATIC,
	[WLAN_HT_CAP_SM_PS_DYNAMIC] = WMI_PEER_SMPS_DYNAMIC,
	[WLAN_HT_CAP_SM_PS_INVALID] = WMI_PEER_SMPS_PS_NONE,
	[WLAN_HT_CAP_SM_PS_DISABLED] = WMI_PEER_SMPS_PS_NONE,
};

static int ath10k_setup_peer_smps(struct ath10k *ar, struct ath10k_vif *arvif,
				  const u8 *addr,
				  const struct ieee80211_sta_ht_cap *ht_cap)
{
	int smps;

	if (!ht_cap->ht_supported)
		return 0;

	smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
	smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;

	if (smps >= ARRAY_SIZE(ath10k_smps_map))
		return -EINVAL;

	return ath10k_wmi_peer_set_param(ar, arvif->vdev_id, addr,
					 WMI_PEER_SMPS_STATE,
					 ath10k_smps_map[smps]);
}

static int ath10k_mac_vif_recalc_txbf(struct ath10k *ar,
				      struct ieee80211_vif *vif,
				      struct ieee80211_sta_vht_cap vht_cap)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	int ret;
	u32 param;
	u32 value;

	if (ath10k_wmi_get_txbf_conf_scheme(ar) != WMI_TXBF_CONF_AFTER_ASSOC)
		return 0;

	if (!(ar->vht_cap_info &
	      (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
	       IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
	       IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
	       IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
		return 0;

	param = ar->wmi.vdev_param->txbf;
	value = 0;

	if (WARN_ON(param == WMI_VDEV_PARAM_UNSUPPORTED))
		return 0;

	/* The following logic is correct. If a remote STA advertises support
	 * for being a beamformer then we should enable us being a beamformee.
	 */

	if (ar->vht_cap_info &
	    (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
	     IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) {
		if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)
			value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE;

		if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)
			value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFEE;
	}

	if (ar->vht_cap_info &
	    (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
	     IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) {
		if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE)
			value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER;

		if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)
			value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFER;
	}

	if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFEE)
		value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE;

	if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFER)
		value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER;

	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, value);
	if (ret) {
		ath10k_warn(ar, "failed to submit vdev param txbf 0x%x: %d\n",
			    value, ret);
		return ret;
	}

	return 0;
}

/* can be called only in mac80211 callbacks due to `key_count` usage */
static void ath10k_bss_assoc(struct ieee80211_hw *hw,
			     struct ieee80211_vif *vif,
			     struct ieee80211_bss_conf *bss_conf)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct ieee80211_sta_ht_cap ht_cap;
	struct ieee80211_sta_vht_cap vht_cap;
	struct wmi_peer_assoc_complete_arg peer_arg;
	struct ieee80211_sta *ap_sta;
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i assoc bssid %pM aid %d\n",
		   arvif->vdev_id, arvif->bssid, arvif->aid);

	rcu_read_lock();

	ap_sta = ieee80211_find_sta(vif, bss_conf->bssid);
	if (!ap_sta) {
		ath10k_warn(ar, "failed to find station entry for bss %pM vdev %i\n",
			    bss_conf->bssid, arvif->vdev_id);
		rcu_read_unlock();
		return;
	}

	/* ap_sta must be accessed only within rcu section which must be left
	 * before calling ath10k_setup_peer_smps() which might sleep. */
	ht_cap = ap_sta->ht_cap;
	vht_cap = ap_sta->vht_cap;

	ret = ath10k_peer_assoc_prepare(ar, vif, ap_sta, &peer_arg);
	if (ret) {
		ath10k_warn(ar, "failed to prepare peer assoc for %pM vdev %i: %d\n",
			    bss_conf->bssid, arvif->vdev_id, ret);
		rcu_read_unlock();
		return;
	}

	rcu_read_unlock();

	ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
	if (ret) {
		ath10k_warn(ar, "failed to run peer assoc for %pM vdev %i: %d\n",
			    bss_conf->bssid, arvif->vdev_id, ret);
		return;
	}

	ret = ath10k_setup_peer_smps(ar, arvif, bss_conf->bssid, &ht_cap);
	if (ret) {
		ath10k_warn(ar, "failed to setup peer SMPS for vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return;
	}

	ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap);
	if (ret) {
		ath10k_warn(ar, "failed to recalc txbf for vdev %i on bss %pM: %d\n",
			    arvif->vdev_id, bss_conf->bssid, ret);
		return;
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC,
		   "mac vdev %d up (associated) bssid %pM aid %d bandwidth %d\n",
		   arvif->vdev_id, bss_conf->bssid, bss_conf->aid, ap_sta->bandwidth);

	WARN_ON(arvif->is_up);

	arvif->aid = bss_conf->aid;
	ether_addr_copy(arvif->bssid, bss_conf->bssid);

	ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, arvif->aid, arvif->bssid);
	if (ret) {
		ath10k_warn(ar, "failed to set vdev %d up: %d\n",
			    arvif->vdev_id, ret);
		return;
	}

	arvif->is_up = true;

	/* Workaround: Some firmware revisions (tested with qca6174
	 * WLAN.RM.2.0-00073) have buggy powersave state machine and must be
	 * poked with peer param command.
	 */
	ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, arvif->bssid,
					WMI_PEER_DUMMY_VAR, 1);
	if (ret) {
		ath10k_warn(ar, "failed to poke peer %pM param for ps workaround on vdev %i: %d\n",
			    arvif->bssid, arvif->vdev_id, ret);
		return;
	}
}

static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
				struct ieee80211_vif *vif)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct ieee80211_sta_vht_cap vht_cap = {};
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i disassoc bssid %pM\n",
		   arvif->vdev_id, arvif->bssid);

	ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
	if (ret)
		ath10k_warn(ar, "failed to down vdev %i: %d\n",
			    arvif->vdev_id, ret);

	arvif->def_wep_key_idx = -1;

	ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap);
	if (ret) {
		ath10k_warn(ar, "failed to recalc txbf for vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return;
	}

	arvif->is_up = false;

	cancel_delayed_work_sync(&arvif->connection_loss_work);
}

/* Convert hw_rate from ratectrl to 'rate-code' that firmware
 * can understand.
 */
static u8 ath10k_convert_hw_rate_to_rc(u8 hw_rate, int bitrate)
{
	int preamble;
	if (ath10k_mac_bitrate_is_cck(bitrate))
		preamble = WMI_RATE_PREAMBLE_CCK;
	else
		preamble = WMI_RATE_PREAMBLE_OFDM;

	return (preamble << 6) | hw_rate;
}

static void ath10k_check_apply_special_rates(struct ath10k *ar,
					     struct ath10k_vif *arvif)
{
	struct ieee80211_hw *hw = ar->hw;
	const struct ieee80211_supported_band *sband;
	struct ieee80211_vif *vif = arvif->vif;
	struct cfg80211_chan_def def;
	enum nl80211_band band;
	u32 ratemask;
	u8 mcast_rt = WMI_FIXED_RATE_NONE;
	u8 bcast_rt = WMI_FIXED_RATE_NONE;
	u8 mgt_rt = WMI_FIXED_RATE_NONE;
	int i;
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	if (ath10k_mac_vif_chan(vif, &def))
		band = NL80211_BAND_2GHZ;
	else
		band = def.chan->band;

	sband = hw->wiphy->bands[band];
	ratemask = arvif->bitrate_mask.control[band].legacy;

	/* 10.1.467 Firmware defaults:
	   5Ghz or p2p mode: 6Mbps mgt, bcast, mcast
	   2.4Ghz: 1Mbps for mgt, 11Mbps for bcast, mcast
	*/

	/* Check for user-specified rates. */
	if (arvif->mcast_rate[band] != WMI_FIXED_RATE_NONE)
		mcast_rt = arvif->mcast_rate[band];

	if (arvif->bcast_rate[band] != WMI_FIXED_RATE_NONE)
		bcast_rt = arvif->bcast_rate[band];

	if (arvif->mgt_rate[band] != WMI_FIXED_RATE_NONE)
		mgt_rt = arvif->mgt_rate[band];

	/* If we don't have user-specified rates, then find rates that work within
	 * the configured ratemask.
	 */

	/* Mgt uses lowest available rate. */
	if (mgt_rt == WMI_FIXED_RATE_NONE) {
		for (i = 0; i < ath10k_g_rates_size; i++) {
			if (ratemask & (1<<i)) {
				/* found it */
				mgt_rt = ath10k_convert_hw_rate_to_rc(sband->bitrates[i].hw_value,
								      sband->bitrates[i].bitrate);
				break;
			}
		}
	}

	if (band == NL80211_BAND_2GHZ) {
		/* Use 11Mbps for mcast, bcast if possible, else fall back to first available. */
		u8 first_rt = WMI_FIXED_RATE_NONE;
		for (i = 0; i < ath10k_g_rates_size; i++) {
			if (ratemask & (1<<i)) {
				if (first_rt == WMI_FIXED_RATE_NONE)
					first_rt = ath10k_convert_hw_rate_to_rc(sband->bitrates[i].hw_value,
										sband->bitrates[i].bitrate);
				if (sband->bitrates[i].bitrate == 110) {
					if (bcast_rt == WMI_FIXED_RATE_NONE)
						bcast_rt = ath10k_convert_hw_rate_to_rc(sband->bitrates[i].hw_value,
											sband->bitrates[i].bitrate);
					if (mcast_rt == WMI_FIXED_RATE_NONE)
						mcast_rt = ath10k_convert_hw_rate_to_rc(sband->bitrates[i].hw_value,
											sband->bitrates[i].bitrate);
					goto found_preferred24;
				}
			}
		}

		/* If here, we did not find preferred rate, use first found. */
		if (bcast_rt == WMI_FIXED_RATE_NONE)
			bcast_rt = first_rt;
		if (mcast_rt == WMI_FIXED_RATE_NONE)
			mcast_rt = first_rt;
	}

found_preferred24:
	if (band == NL80211_BAND_5GHZ) {
		for (i = 0; i < ath10k_g_rates_size; i++) {
			if (ratemask & (1<<i)) {
				/* found it */
				if (bcast_rt == WMI_FIXED_RATE_NONE)
					bcast_rt = ath10k_convert_hw_rate_to_rc(sband->bitrates[i].hw_value,
										sband->bitrates[i].bitrate);
				if (mcast_rt == WMI_FIXED_RATE_NONE)
					mcast_rt = ath10k_convert_hw_rate_to_rc(sband->bitrates[i].hw_value,
										sband->bitrates[i].bitrate);
				break;
			}
		}
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC, "apply-special-rates: ratemask: 0x%x mcast: 0x%x  bcast: 0x%x  mgmt: 0x%x band: %d\n",
		   ratemask, mcast_rt, bcast_rt, mgt_rt, band);

	if (mcast_rt != WMI_FIXED_RATE_NONE) {
		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
						ar->wmi.vdev_param->mcast_data_rate,
						mcast_rt);
		if (ret)
			ath10k_warn(ar, "failed to set mcast rate param 0x%02x: %d\n",
				    mcast_rt, ret);
	}

	if (bcast_rt != WMI_FIXED_RATE_NONE) {
		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
						ar->wmi.vdev_param->bcast_data_rate,
						bcast_rt);
		if (ret)
			ath10k_warn(ar, "failed to set bcast rate param 0x%02x: %d\n",
				    bcast_rt, ret);
	}

	if (mgt_rt != WMI_FIXED_RATE_NONE) {
		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
						ar->wmi.vdev_param->mgmt_rate,
						mgt_rt);
		if (ret)
			ath10k_warn(ar, "failed to set mgt rate param 0x%02x: %d\n",
				    mgt_rt, ret);
	}
}

static int ath10k_station_assoc(struct ath10k *ar,
				struct ieee80211_vif *vif,
				struct ieee80211_sta *sta,
				bool reassoc)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct wmi_peer_assoc_complete_arg peer_arg;
	int ret = 0;

	lockdep_assert_held(&ar->conf_mutex);

	ret = ath10k_peer_assoc_prepare(ar, vif, sta, &peer_arg);
	if (ret) {
		ath10k_warn(ar, "failed to prepare WMI peer assoc for %pM vdev %i: %i\n",
			    sta->addr, arvif->vdev_id, ret);
		return ret;
	}

	ath10k_check_apply_special_rates(ar, arvif);

	ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
	if (ret) {
		ath10k_warn(ar, "failed to run peer assoc for STA %pM vdev %i: %d\n",
			    sta->addr, arvif->vdev_id, ret);
		return ret;
	}

	/* Re-assoc is run only to update supported rates for given station. It
	 * doesn't make much sense to reconfigure the peer completely.
	 */
	if (!reassoc) {
		ret = ath10k_setup_peer_smps(ar, arvif, sta->addr,
					     &sta->ht_cap);
		if (ret) {
			ath10k_warn(ar, "failed to setup peer SMPS for vdev %d: %d\n",
				    arvif->vdev_id, ret);
			return ret;
		}

		ret = ath10k_peer_assoc_qos_ap(ar, arvif, sta);
		if (ret) {
			ath10k_warn(ar, "failed to set qos params for STA %pM for vdev %i: %d\n",
				    sta->addr, arvif->vdev_id, ret);
			return ret;
		}

		if (!sta->wme) {
			arvif->num_legacy_stations++;
			ret  = ath10k_recalc_rtscts_prot(arvif);
			if (ret) {
				ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
					    arvif->vdev_id, ret);
				return ret;
			}
		}

		/* Plumb cached keys only for static WEP */
		if (arvif->def_wep_key_idx != -1) {
			ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
			if (ret) {
				ath10k_warn(ar, "failed to install peer wep keys for vdev %i: %d\n",
					    arvif->vdev_id, ret);
				return ret;
			}
		}
	}

	return ret;
}

static int ath10k_station_disassoc(struct ath10k *ar,
				   struct ieee80211_vif *vif,
				   struct ieee80211_sta *sta)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	int ret = 0;

	lockdep_assert_held(&ar->conf_mutex);

	if (!sta->wme) {
		arvif->num_legacy_stations--;
		ret = ath10k_recalc_rtscts_prot(arvif);
		if (ret) {
			ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
				    arvif->vdev_id, ret);
			return ret;
		}
	}

	ret = ath10k_clear_peer_keys(arvif, sta->addr);
	if (ret) {
		ath10k_warn(ar, "failed to clear all peer wep keys for vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	return ret;
}

/**************/
/* Regulatory */
/**************/

static int ath10k_update_channel_list(struct ath10k *ar)
{
	struct ieee80211_hw *hw = ar->hw;
	struct ieee80211_supported_band **bands;
	enum nl80211_band band;
	struct ieee80211_channel *channel;
	struct wmi_scan_chan_list_arg arg = {0};
	struct wmi_channel_arg *ch;
	bool passive;
	int len;
	int ret;
	int i;

	lockdep_assert_held(&ar->conf_mutex);

	bands = hw->wiphy->bands;
	for (band = 0; band < NUM_NL80211_BANDS; band++) {
		if (!bands[band])
			continue;

		for (i = 0; i < bands[band]->n_channels; i++) {
			if (bands[band]->channels[i].flags &
			    IEEE80211_CHAN_DISABLED)
				continue;

			arg.n_channels++;
		}
	}

	len = sizeof(struct wmi_channel_arg) * arg.n_channels;
	arg.channels = kzalloc(len, GFP_KERNEL);
	if (!arg.channels)
		return -ENOMEM;

	ch = arg.channels;
	for (band = 0; band < NUM_NL80211_BANDS; band++) {
		if (!bands[band])
			continue;

		for (i = 0; i < bands[band]->n_channels; i++) {
			channel = &bands[band]->channels[i];

			if (channel->flags & IEEE80211_CHAN_DISABLED)
				continue;

			ch->allow_ht   = true;

			/* FIXME: when should we really allow VHT? */
			ch->allow_vht = true;

			ch->allow_ibss =
				!(channel->flags & IEEE80211_CHAN_NO_IR);

			ch->ht40plus =
				!(channel->flags & IEEE80211_CHAN_NO_HT40PLUS);

			ch->chan_radar =
				!!(channel->flags & IEEE80211_CHAN_RADAR);

			passive = channel->flags & IEEE80211_CHAN_NO_IR;
			ch->passive = passive;

			ch->freq = channel->center_freq;
			ch->band_center_freq1 = channel->center_freq;
			ch->min_power = 0;
			ch->max_power = channel->max_power * 2;
			ch->max_reg_power = channel->max_reg_power * 2;
			ch->max_antenna_gain = channel->max_antenna_gain * 2;
			ch->reg_class_id = 0; /* FIXME */

			/* FIXME: why use only legacy modes, why not any
			 * HT/VHT modes? Would that even make any
			 * difference? */
			if (channel->band == NL80211_BAND_2GHZ)
				ch->mode = MODE_11G;
			else
				ch->mode = MODE_11A;

			if (WARN_ON_ONCE(ch->mode == MODE_UNKNOWN))
				continue;

			ath10k_dbg(ar, ATH10K_DBG_WMI,
				   "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
				    ch - arg.channels, arg.n_channels,
				   ch->freq, ch->max_power, ch->max_reg_power,
				   ch->max_antenna_gain, ch->mode);

			ch++;
		}
	}

	ret = ath10k_wmi_scan_chan_list(ar, &arg);
	kfree(arg.channels);

	return ret;
}

static enum wmi_dfs_region
ath10k_mac_get_dfs_region(enum nl80211_dfs_regions dfs_region)
{
	switch (dfs_region) {
	case NL80211_DFS_UNSET:
		return WMI_UNINIT_DFS_DOMAIN;
	case NL80211_DFS_FCC:
		return WMI_FCC_DFS_DOMAIN;
	case NL80211_DFS_ETSI:
		return WMI_ETSI_DFS_DOMAIN;
	case NL80211_DFS_JP:
		return WMI_MKK4_DFS_DOMAIN;
	}
	return WMI_UNINIT_DFS_DOMAIN;
}

static void ath10k_regd_update(struct ath10k *ar)
{
	struct reg_dmn_pair_mapping *regpair;
	int ret;
	enum wmi_dfs_region wmi_dfs_reg;
	enum nl80211_dfs_regions nl_dfs_reg;

	lockdep_assert_held(&ar->conf_mutex);

	ret = ath10k_update_channel_list(ar);
	if (ret)
		ath10k_warn(ar, "failed to update channel list: %d\n", ret);

	regpair = ar->ath_common.regulatory.regpair;

	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
		nl_dfs_reg = ar->dfs_detector->region;
		wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg);
		ath10k_dbg(ar, ATH10K_DBG_REGULATORY,
			   "nl_dfs_reg: %i  wmi_dfs_reg: %i\n",
			    nl_dfs_reg, wmi_dfs_reg);
	} else {
		wmi_dfs_reg = WMI_UNINIT_DFS_DOMAIN;
		ath10k_dbg(ar, ATH10K_DBG_REGULATORY,
			   "not DFS_CERTIFIED or no dfs_detector.\n");
	}

	/* Target allows setting up per-band regdomain but ath_common provides
	 * a combined one only */
	ret = ath10k_wmi_pdev_set_regdomain(ar,
					    regpair->reg_domain,
					    regpair->reg_domain, /* 2ghz */
					    regpair->reg_domain, /* 5ghz */
					    regpair->reg_2ghz_ctl,
					    regpair->reg_5ghz_ctl,
					    wmi_dfs_reg);
	if (ret)
		ath10k_warn(ar, "failed to set pdev regdomain: %d\n", ret);
}

static void ath10k_reg_notifier(struct wiphy *wiphy,
				struct regulatory_request *request)
{
	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
	struct ath10k *ar = hw->priv;
	bool result;

	ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);

	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
		ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "reg-notifier: dfs region 0x%x\n",
			   request->dfs_region);
		result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector,
							  request->dfs_region);
		if (!result)
			ath10k_warn(ar, "DFS region 0x%X not supported, will trigger radar for every pulse\n",
				    request->dfs_region);
	}

	mutex_lock(&ar->conf_mutex);
	if (ar->state == ATH10K_STATE_ON)
		ath10k_regd_update(ar);
	mutex_unlock(&ar->conf_mutex);
}

/***************/
/* TX handlers */
/***************/

enum ath10k_mac_tx_path {
	ATH10K_MAC_TX_HTT,
	ATH10K_MAC_TX_HTT_MGMT,
	ATH10K_MAC_TX_WMI_MGMT,
	ATH10K_MAC_TX_UNKNOWN,
};

void ath10k_mac_tx_lock(struct ath10k *ar, int reason)
{
	lockdep_assert_held(&ar->htt.tx_lock);

	WARN_ON(reason >= ATH10K_TX_PAUSE_MAX);
	ar->tx_paused |= BIT(reason);
	ieee80211_stop_queues(ar->hw);
}

static void ath10k_mac_tx_unlock_iter(void *data, u8 *mac,
				      struct ieee80211_vif *vif)
{
	struct ath10k *ar = data;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);

	if (arvif->tx_paused)
		return;

	ieee80211_wake_queue(ar->hw, arvif->vdev_id);
}

void ath10k_mac_tx_unlock(struct ath10k *ar, int reason)
{
	lockdep_assert_held(&ar->htt.tx_lock);

	WARN_ON(reason >= ATH10K_TX_PAUSE_MAX);
	ar->tx_paused &= ~BIT(reason);

	if (ar->tx_paused)
		return;

	ieee80211_iterate_active_interfaces_atomic(ar->hw,
						   IEEE80211_IFACE_ITER_RESUME_ALL,
						   ath10k_mac_tx_unlock_iter,
						   ar);

	ieee80211_wake_queue(ar->hw, ar->hw->offchannel_tx_hw_queue);
}

void ath10k_mac_vif_tx_lock(struct ath10k_vif *arvif, int reason)
{
	struct ath10k *ar = arvif->ar;

	lockdep_assert_held(&ar->htt.tx_lock);

	WARN_ON(reason >= BITS_PER_LONG);
	arvif->tx_paused |= BIT(reason);
	ieee80211_stop_queue(ar->hw, arvif->vdev_id);
}

void ath10k_mac_vif_tx_unlock(struct ath10k_vif *arvif, int reason)
{
	struct ath10k *ar = arvif->ar;

	lockdep_assert_held(&ar->htt.tx_lock);

	WARN_ON(reason >= BITS_PER_LONG);
	arvif->tx_paused &= ~BIT(reason);

	if (ar->tx_paused)
		return;

	if (arvif->tx_paused)
		return;

	ieee80211_wake_queue(ar->hw, arvif->vdev_id);
}

static void ath10k_mac_vif_handle_tx_pause(struct ath10k_vif *arvif,
					   enum wmi_tlv_tx_pause_id pause_id,
					   enum wmi_tlv_tx_pause_action action)
{
	struct ath10k *ar = arvif->ar;

	lockdep_assert_held(&ar->htt.tx_lock);

	switch (action) {
	case WMI_TLV_TX_PAUSE_ACTION_STOP:
		ath10k_mac_vif_tx_lock(arvif, pause_id);
		break;
	case WMI_TLV_TX_PAUSE_ACTION_WAKE:
		ath10k_mac_vif_tx_unlock(arvif, pause_id);
		break;
	default:
		ath10k_warn(ar, "received unknown tx pause action %d on vdev %i, ignoring\n",
			    action, arvif->vdev_id);
		break;
	}
}

struct ath10k_mac_tx_pause {
	u32 vdev_id;
	enum wmi_tlv_tx_pause_id pause_id;
	enum wmi_tlv_tx_pause_action action;
};

static void ath10k_mac_handle_tx_pause_iter(void *data, u8 *mac,
					    struct ieee80211_vif *vif)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct ath10k_mac_tx_pause *arg = data;

	if (arvif->vdev_id != arg->vdev_id)
		return;

	ath10k_mac_vif_handle_tx_pause(arvif, arg->pause_id, arg->action);
}

void ath10k_mac_handle_tx_pause_vdev(struct ath10k *ar, u32 vdev_id,
				     enum wmi_tlv_tx_pause_id pause_id,
				     enum wmi_tlv_tx_pause_action action)
{
	struct ath10k_mac_tx_pause arg = {
		.vdev_id = vdev_id,
		.pause_id = pause_id,
		.action = action,
	};

	spin_lock_bh(&ar->htt.tx_lock);
	ieee80211_iterate_active_interfaces_atomic(ar->hw,
						   IEEE80211_IFACE_ITER_RESUME_ALL,
						   ath10k_mac_handle_tx_pause_iter,
						   &arg);
	spin_unlock_bh(&ar->htt.tx_lock);
}

static enum ath10k_hw_txrx_mode
ath10k_mac_tx_h_get_txmode(struct ath10k *ar,
			   struct ieee80211_vif *vif,
			   struct ieee80211_sta *sta,
			   struct sk_buff *skb)
{
	const struct ieee80211_hdr *hdr = (void *)skb->data;
	__le16 fc = hdr->frame_control;

	if (!vif || vif->type == NL80211_IFTYPE_MONITOR)
		return ATH10K_HW_TXRX_RAW;

	/* CT Firmware with HTT-TX support sends all frames, including
	 * management frames, over HTT in NATIVE-WIFI format.
	 */
	if (ar->ct_all_pkts_htt)
		goto do_native_mgt_ct;

	if (ieee80211_is_mgmt(fc))
		return ATH10K_HW_TXRX_MGMT;

	/* Workaround:
	 *
	 * NullFunc frames are mostly used to ping if a client or AP are still
	 * reachable and responsive. This implies tx status reports must be
	 * accurate - otherwise either mac80211 or userspace (e.g. hostapd) can
	 * come to a conclusion that the other end disappeared and tear down
	 * BSS connection or it can never disconnect from BSS/client (which is
	 * the case).
	 *
	 * Firmware with HTT older than 3.0 delivers incorrect tx status for
	 * NullFunc frames to driver. However there's a HTT Mgmt Tx command
	 * which seems to deliver correct tx reports for NullFunc frames. The
	 * downside of using it is it ignores client powersave state so it can
	 * end up disconnecting sleeping clients in AP mode. It should fix STA
	 * mode though because AP don't sleep.
	 */
	if (ar->htt.target_version_major < 3 &&
	    (ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc)) &&
	    !test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
		      ar->running_fw->fw_file.fw_features))
		return ATH10K_HW_TXRX_MGMT;

	/* Workaround:
	 *
	 * Some wmi-tlv firmwares for qca6174 have broken Tx key selection for
	 * NativeWifi txmode - it selects AP key instead of peer key. It seems
	 * to work with Ethernet txmode so use it.
	 *
	 * FIXME: Check if raw mode works with TDLS.
	 */
do_native_mgt_ct:
	if (ieee80211_is_data_present(fc) && sta && sta->tdls)
		return ATH10K_HW_TXRX_ETHERNET;

	if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
		return ATH10K_HW_TXRX_RAW;

	return ATH10K_HW_TXRX_NATIVE_WIFI;
}

static bool ath10k_tx_h_use_hwcrypto(struct ieee80211_vif *vif,
				     struct sk_buff *skb)
{
	const struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
	const struct ieee80211_hdr *hdr = (void *)skb->data;
	const u32 mask = IEEE80211_TX_INTFL_DONT_ENCRYPT |
			 IEEE80211_TX_CTL_INJECTED;

	if (!ieee80211_has_protected(hdr->frame_control))
		return false;

	if ((info->flags & mask) == mask)
		return false;

	if (vif)
		return !ath10k_vif_to_arvif(vif)->nohwcrypt;

	return true;
}

/* HTT Tx uses Native Wifi tx mode which expects 802.11 frames without QoS
 * Control in the header.
 */
static void ath10k_tx_h_nwifi(struct ieee80211_hw *hw, struct sk_buff *skb)
{
	struct ieee80211_hdr *hdr = (void *)skb->data;
	struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
	u8 *qos_ctl;

	if (!ieee80211_is_data_qos(hdr->frame_control))
		return;

	qos_ctl = ieee80211_get_qos_ctl(hdr);
	memmove(skb->data + IEEE80211_QOS_CTL_LEN,
		skb->data, (void *)qos_ctl - (void *)skb->data);
	skb_pull(skb, IEEE80211_QOS_CTL_LEN);

	/* Some firmware revisions don't handle sending QoS NullFunc well.
	 * These frames are mainly used for CQM purposes so it doesn't really
	 * matter whether QoS NullFunc or NullFunc are sent.
	 */
	hdr = (void *)skb->data;
	if (ieee80211_is_qos_nullfunc(hdr->frame_control))
		cb->flags &= ~ATH10K_SKB_F_QOS;

	hdr->frame_control &= ~__cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
}

static void ath10k_tx_h_8023(struct sk_buff *skb)
{
	struct ieee80211_hdr *hdr;
	struct rfc1042_hdr *rfc1042;
	struct ethhdr *eth;
	size_t hdrlen;
	u8 da[ETH_ALEN];
	u8 sa[ETH_ALEN];
	__be16 type;

	hdr = (void *)skb->data;
	hdrlen = ieee80211_hdrlen(hdr->frame_control);
	rfc1042 = (void *)skb->data + hdrlen;

	ether_addr_copy(da, ieee80211_get_DA(hdr));
	ether_addr_copy(sa, ieee80211_get_SA(hdr));
	type = rfc1042->snap_type;

	skb_pull(skb, hdrlen + sizeof(*rfc1042));
	skb_push(skb, sizeof(*eth));

	eth = (void *)skb->data;
	ether_addr_copy(eth->h_dest, da);
	ether_addr_copy(eth->h_source, sa);
	eth->h_proto = type;
}

static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar,
				       struct ieee80211_vif *vif,
				       struct sk_buff *skb)
{
	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);

	/* This is case only for P2P_GO */
	if (vif->type != NL80211_IFTYPE_AP || !vif->p2p)
		return;

	if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) {
		spin_lock_bh(&ar->data_lock);
		if (arvif->u.ap.noa_data)
			if (!pskb_expand_head(skb, 0, arvif->u.ap.noa_len,
					      GFP_ATOMIC))
				memcpy(skb_put(skb, arvif->u.ap.noa_len),
				       arvif->u.ap.noa_data,
				       arvif->u.ap.noa_len);
		spin_unlock_bh(&ar->data_lock);
	}
}

static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
				    struct ieee80211_vif *vif,
				    struct ieee80211_txq *txq,
				    struct sk_buff *skb)
{
	struct ieee80211_hdr *hdr = (void *)skb->data;
	struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);

	cb->flags = 0;
	if (!ath10k_tx_h_use_hwcrypto(vif, skb))
		cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;

	if (ieee80211_is_mgmt(hdr->frame_control))
		cb->flags |= ATH10K_SKB_F_MGMT;

	if (ieee80211_is_data_qos(hdr->frame_control))
		cb->flags |= ATH10K_SKB_F_QOS;

	cb->vif = vif;
	cb->txq = txq;
}

bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
{
	/* FIXME: Not really sure since when the behaviour changed. At some
	 * point new firmware stopped requiring creation of peer entries for
	 * offchannel tx (and actually creating them causes issues with wmi-htc
	 * tx credit replenishment and reliability). Assuming it's at least 3.4
	 * because that's when the `freq` was introduced to TX_FRM HTT command.
	 */
	return (ar->htt.target_version_major >= 3 &&
		ar->htt.target_version_minor >= 4 &&
		ar->running_fw->fw_file.htt_op_version == ATH10K_FW_HTT_OP_VERSION_TLV);
}

static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb)
{
	struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue;
	int ret = 0;

	spin_lock_bh(&ar->data_lock);

	if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) {
		ath10k_warn(ar, "wmi mgmt tx queue is full\n");
		ret = -ENOSPC;
		goto unlock;
	}

	__skb_queue_tail(q, skb);
	ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);

unlock:
	spin_unlock_bh(&ar->data_lock);

	return ret;
}

static enum ath10k_mac_tx_path
ath10k_mac_tx_h_get_txpath(struct ath10k *ar,
			   struct sk_buff *skb,
			   enum ath10k_hw_txrx_mode txmode)
{
	switch (txmode) {
	case ATH10K_HW_TXRX_RAW:
	case ATH10K_HW_TXRX_NATIVE_WIFI:
	case ATH10K_HW_TXRX_ETHERNET:
		return ATH10K_MAC_TX_HTT;
	case ATH10K_HW_TXRX_MGMT:
		if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
			     ar->running_fw->fw_file.fw_features))
			return ATH10K_MAC_TX_WMI_MGMT;
		else if (ar->htt.target_version_major >= 3)
			return ATH10K_MAC_TX_HTT;
		else
			return ATH10K_MAC_TX_HTT_MGMT;
	}

	return ATH10K_MAC_TX_UNKNOWN;
}

static int ath10k_mac_tx_submit(struct ath10k *ar,
				enum ath10k_hw_txrx_mode txmode,
				enum ath10k_mac_tx_path txpath,
				struct sk_buff *skb)
{
	struct ath10k_htt *htt = &ar->htt;
	int ret = -EINVAL;

	switch (txpath) {
	case ATH10K_MAC_TX_HTT:
		ret = ath10k_htt_tx(htt, txmode, skb);
		break;
	case ATH10K_MAC_TX_HTT_MGMT:
		ret = ath10k_htt_mgmt_tx(htt, skb);
		break;
	case ATH10K_MAC_TX_WMI_MGMT:
		ret = ath10k_mac_tx_wmi_mgmt(ar, skb);
		break;
	case ATH10K_MAC_TX_UNKNOWN:
		WARN_ON_ONCE(1);
		ret = -EINVAL;
		break;
	}

	if (ret) {
		if (net_ratelimit())
			ath10k_warn(ar, "failed to transmit packet, dropping: %d\n",
				    ret);
		ieee80211_free_txskb(ar->hw, skb);
	}

	return ret;
}

/* This function consumes the sk_buff regardless of return value as far as
 * caller is concerned so no freeing is necessary afterwards.
 */
static int ath10k_mac_tx(struct ath10k *ar,
			 struct ieee80211_vif *vif,
			 struct ieee80211_sta *sta,
			 enum ath10k_hw_txrx_mode txmode,
			 enum ath10k_mac_tx_path txpath,
			 struct sk_buff *skb)
{
	struct ieee80211_hw *hw = ar->hw;
	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
	int ret;

	/* We should disable CCK RATE due to P2P */
	if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
		ath10k_dbg(ar, ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");

	switch (txmode) {
	case ATH10K_HW_TXRX_MGMT:
	case ATH10K_HW_TXRX_NATIVE_WIFI:
		ath10k_tx_h_nwifi(hw, skb);
		ath10k_tx_h_add_p2p_noa_ie(ar, vif, skb);
		ath10k_tx_h_seq_no(vif, skb);
		break;
	case ATH10K_HW_TXRX_ETHERNET:
		ath10k_tx_h_8023(skb);
		break;
	case ATH10K_HW_TXRX_RAW:
		if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
			WARN_ON_ONCE(1);
			ieee80211_free_txskb(hw, skb);
			return -ENOTSUPP;
		}
	}

	if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
		if (!ath10k_mac_tx_frm_has_freq(ar)) {
			ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %p\n",
				   skb);

			skb_queue_tail(&ar->offchan_tx_queue, skb);
			ieee80211_queue_work(hw, &ar->offchan_tx_work);
			return 0;
		}
	}

	ret = ath10k_mac_tx_submit(ar, txmode, txpath, skb);
	if (ret) {
		ath10k_warn(ar, "failed to submit frame: %d\n", ret);
		return ret;
	}

	return 0;
}

void ath10k_offchan_tx_purge(struct ath10k *ar)
{
	struct sk_buff *skb;

	for (;;) {
		skb = skb_dequeue(&ar->offchan_tx_queue);
		if (!skb)
			break;

		ieee80211_free_txskb(ar->hw, skb);
	}
}

void ath10k_offchan_tx_work(struct work_struct *work)
{
	struct ath10k *ar = container_of(work, struct ath10k, offchan_tx_work);
	struct ath10k_peer *peer;
	struct ath10k_vif *arvif;
	enum ath10k_hw_txrx_mode txmode;
	enum ath10k_mac_tx_path txpath;
	struct ieee80211_hdr *hdr;
	struct ieee80211_vif *vif;
	struct ieee80211_sta *sta;
	struct sk_buff *skb;
	const u8 *peer_addr;
	int vdev_id;
	int ret;
	unsigned long time_left;
	bool tmp_peer_created = false;

	/* FW requirement: We must create a peer before FW will send out
	 * an offchannel frame. Otherwise the frame will be stuck and
	 * never transmitted. We delete the peer upon tx completion.
	 * It is unlikely that a peer for offchannel tx will already be
	 * present. However it may be in some rare cases so account for that.
	 * Otherwise we might remove a legitimate peer and break stuff. */

	for (;;) {
		skb = skb_dequeue(&ar->offchan_tx_queue);
		if (!skb)
			break;

		mutex_lock(&ar->conf_mutex);

		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %p\n",
			   skb);

		hdr = (struct ieee80211_hdr *)skb->data;
		peer_addr = ieee80211_get_DA(hdr);

		spin_lock_bh(&ar->data_lock);
		vdev_id = ar->scan.vdev_id;
		peer = ath10k_peer_find(ar, vdev_id, peer_addr);
		spin_unlock_bh(&ar->data_lock);

		if (peer)
			/* FIXME: should this use ath10k_warn()? */
			ath10k_dbg(ar, ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
				   peer_addr, vdev_id);

		if (!peer) {
			ret = ath10k_peer_create(ar, NULL, NULL, vdev_id,
						 peer_addr,
						 WMI_PEER_TYPE_DEFAULT);
			if (ret)
				ath10k_warn(ar, "failed to create peer %pM on vdev %d: %d\n",
					    peer_addr, vdev_id, ret);
			tmp_peer_created = (ret == 0);
		}

		spin_lock_bh(&ar->data_lock);
		reinit_completion(&ar->offchan_tx_completed);
		ar->offchan_tx_skb = skb;
		spin_unlock_bh(&ar->data_lock);

		/* It's safe to access vif and sta - conf_mutex guarantees that
		 * sta_state() and remove_interface() are locked exclusively
		 * out wrt to this offchannel worker.
		 */
		arvif = ath10k_get_arvif(ar, vdev_id);
		if (arvif) {
			vif = arvif->vif;
			sta = ieee80211_find_sta(vif, peer_addr);
		} else {
			vif = NULL;
			sta = NULL;
		}

		txmode = ath10k_mac_tx_h_get_txmode(ar, vif, sta, skb);
		txpath = ath10k_mac_tx_h_get_txpath(ar, skb, txmode);

		ret = ath10k_mac_tx(ar, vif, sta, txmode, txpath, skb);
		if (ret) {
			ath10k_warn(ar, "failed to transmit offchannel frame: %d\n",
				    ret);
			/* not serious */
		}

		time_left =
		wait_for_completion_timeout(&ar->offchan_tx_completed, 3 * HZ);
		if (time_left == 0)
			ath10k_warn(ar, "timed out waiting for offchannel skb %p\n",
				    skb);

		if (!peer && tmp_peer_created) {
			ret = ath10k_peer_delete(ar, vdev_id, peer_addr);
			if (ret)
				ath10k_warn(ar, "failed to delete peer %pM on vdev %d: %d\n",
					    peer_addr, vdev_id, ret);
		}

		mutex_unlock(&ar->conf_mutex);
	}
}

void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar)
{
	struct sk_buff *skb;

	for (;;) {
		skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
		if (!skb)
			break;

		ieee80211_free_txskb(ar->hw, skb);
	}
}

void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
{
	struct ath10k *ar = container_of(work, struct ath10k, wmi_mgmt_tx_work);
	struct sk_buff *skb;
	int ret;

	for (;;) {
		skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
		if (!skb)
			break;

		ret = ath10k_wmi_mgmt_tx(ar, skb);
		if (ret) {
			ath10k_warn(ar, "failed to transmit management frame via WMI: %d\n",
				    ret);
			ieee80211_free_txskb(ar->hw, skb);
		}
	}
}

static void ath10k_mac_txq_init(struct ath10k *ar, struct ieee80211_txq *txq)
{
	struct ath10k_txq *artxq = (void *)txq->drv_priv;
	struct ath10k_txq *tmp, *walker;
	struct ieee80211_txq *txq_tmp;
	int i = 0;

	if (!txq)
		return;

	spin_lock_bh(&ar->txqs_lock);

	/* Remove from ar->txqs in case it still exists there. */
	list_for_each_entry_safe(walker, tmp, &ar->txqs, list) {
		txq_tmp = container_of((void *)walker, struct ieee80211_txq,
				       drv_priv);
		if ((++i % 10000) == 0) {
			ath10k_err(ar, "txq-init: Checking txq_tmp: %p i: %d\n", txq_tmp, i);
			ath10k_err(ar, "txq-init: txqs: %p walker->list: %p w->next: %p  w->prev: %p ar->txqs: %p\n",
				   &ar->txqs, &(walker->list), walker->list.next, walker->list.prev, &ar->txqs);
		}

		if (txq_tmp == txq) {
			WARN_ON_ONCE(1);
			ath10k_err(ar, "txq-init: Found txq when it should be deleted, txq_tmp: %p  txq: %p\n",
				   txq_tmp, txq);
			list_del(&walker->list);
		}
	}
	spin_unlock_bh(&ar->txqs_lock);

	INIT_LIST_HEAD(&artxq->list);
}

static void ath10k_mac_txq_unref(struct ath10k *ar, struct ieee80211_txq *txq)
{
	struct ath10k_txq *artxq = (void *)txq->drv_priv;
	struct ath10k_txq *tmp, *walker;
	struct ath10k_skb_cb *cb;
	struct sk_buff *msdu;
	struct ieee80211_txq *txq_tmp;
	int msdu_id;
	int i = 0;

	if (!txq)
		return;

	spin_lock_bh(&ar->txqs_lock);
	if (!list_empty(&artxq->list))
		list_del_init(&artxq->list);

	/* Remove from ar->txqs in case it still exists there. */
	list_for_each_entry_safe(walker, tmp, &ar->txqs, list) {
		txq_tmp = container_of((void *)walker, struct ieee80211_txq,
				       drv_priv);
		if ((++i % 10000) == 0) {
			ath10k_err(ar, "Checking txq_tmp: %p i: %d\n", txq_tmp, i);
			ath10k_err(ar, "txqs: %p walker->list: %p w->next: %p  w->prev: %p ar->txqs: %p\n",
				   &ar->txqs, &(walker->list), walker->list.next, walker->list.prev, &ar->txqs);
		}

		if (txq_tmp == txq) {
			WARN_ON_ONCE(1);
			ath10k_err(ar, "Found txq when it should be deleted, txq_tmp: %p  txq: %p\n",
				   txq_tmp, txq);
			list_del(&walker->list);
		}
	}
	spin_unlock_bh(&ar->txqs_lock);

	spin_lock_bh(&ar->htt.tx_lock);
	idr_for_each_entry(&ar->htt.pending_tx, msdu, msdu_id) {
		cb = ATH10K_SKB_CB(msdu);
		if (cb->txq == txq)
			cb->txq = NULL;
	}
	spin_unlock_bh(&ar->htt.tx_lock);
}

struct ieee80211_txq *ath10k_mac_txq_lookup(struct ath10k *ar,
					    u16 peer_id,
					    u8 tid)
{
	struct ath10k_peer *peer;

	lockdep_assert_held(&ar->data_lock);

	peer = ar->peer_map[peer_id];
	if (!peer)
		return NULL;

	if (peer->removed)
		return NULL;

	if (peer->sta)
		return peer->sta->txq[tid];
	else if (peer->vif)
		return peer->vif->txq;
	else
		return NULL;
}

static bool ath10k_mac_tx_can_push(struct ieee80211_hw *hw,
				   struct ieee80211_txq *txq)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_txq *artxq = (void *)txq->drv_priv;

	/* No need to get locks */

	if (ar->htt.tx_q_state.mode == HTT_TX_MODE_SWITCH_PUSH)
		return true;

	if (ar->htt.num_pending_tx < ar->htt.tx_q_state.num_push_allowed)
		return true;

	if (artxq->num_fw_queued < artxq->num_push_allowed)
		return true;

	return false;
}

int ath10k_mac_tx_push_txq(struct ieee80211_hw *hw,
			   struct ieee80211_txq *txq)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_htt *htt = &ar->htt;
	struct ath10k_txq *artxq = (void *)txq->drv_priv;
	struct ieee80211_vif *vif = txq->vif;
	struct ieee80211_sta *sta = txq->sta;
	enum ath10k_hw_txrx_mode txmode;
	enum ath10k_mac_tx_path txpath;
	struct sk_buff *skb;
	size_t skb_len;
	int ret;

	spin_lock_bh(&ar->htt.tx_lock);
	ret = ath10k_htt_tx_inc_pending(htt);
	spin_unlock_bh(&ar->htt.tx_lock);

	if (ret)
		return ret;

	skb = ieee80211_tx_dequeue(hw, txq);
	if (!skb) {
		spin_lock_bh(&ar->htt.tx_lock);
		ath10k_htt_tx_dec_pending(htt);
		spin_unlock_bh(&ar->htt.tx_lock);

		return -ENOENT;
	}

	ath10k_mac_tx_h_fill_cb(ar, vif, txq, skb);

	skb_len = skb->len;
	txmode = ath10k_mac_tx_h_get_txmode(ar, vif, sta, skb);
	txpath = ath10k_mac_tx_h_get_txpath(ar, skb, txmode);

	ret = ath10k_mac_tx(ar, vif, sta, txmode, txpath, skb);
	if (unlikely(ret)) {
		ath10k_warn(ar, "failed to push frame: %d\n", ret);

		spin_lock_bh(&ar->htt.tx_lock);
		ath10k_htt_tx_dec_pending(htt);
		spin_unlock_bh(&ar->htt.tx_lock);

		return ret;
	}

	spin_lock_bh(&ar->htt.tx_lock);
	artxq->num_fw_queued++;
	spin_unlock_bh(&ar->htt.tx_lock);

	return skb_len;
}

void ath10k_mac_tx_push_pending(struct ath10k *ar)
{
	struct ieee80211_hw *hw = ar->hw;
	struct ieee80211_txq *txq;
	struct ath10k_txq *artxq;
	struct ath10k_txq *last;
	int ret;
	int max;
	int loop_max = 2000;

	spin_lock_bh(&ar->txqs_lock);
	rcu_read_lock();

	last = list_last_entry(&ar->txqs, struct ath10k_txq, list);
	while (!list_empty(&ar->txqs)) {
		artxq = list_first_entry(&ar->txqs, struct ath10k_txq, list);
		txq = container_of((void *)artxq, struct ieee80211_txq,
				   drv_priv);

		if (--loop_max == 0) {
			ath10k_err(ar, "Looped 2000 times in tx_push_pending, bailing out.\n");
			break;
		}

		/* Prevent aggressive sta/tid taking over tx queue */
		max = 16;
		ret = 0;
		while (ath10k_mac_tx_can_push(hw, txq) && max--) {
			ret = ath10k_mac_tx_push_txq(hw, txq);
			if (ret < 0)
				break;
		}

		list_del_init(&artxq->list);
		if (ret != -ENOENT)
			list_add_tail(&artxq->list, &ar->txqs);
		else if (artxq == last)
			last = list_last_entry(&ar->txqs, struct ath10k_txq, list);

		ath10k_htt_tx_txq_update(hw, txq);

		if (artxq == last || (ret < 0 && ret != -ENOENT))
			break;
	}

	rcu_read_unlock();
	spin_unlock_bh(&ar->txqs_lock);
}

/************/
/* Scanning */
/************/

void __ath10k_scan_finish(struct ath10k *ar)
{
	lockdep_assert_held(&ar->data_lock);

	switch (ar->scan.state) {
	case ATH10K_SCAN_IDLE:
		break;
	case ATH10K_SCAN_RUNNING:
	case ATH10K_SCAN_ABORTING:
		if (!ar->scan.is_roc) {
#if defined STANDALONE_CT && ! defined CT_PRE_NUM_NL80211_BANDS
			/* LEDE is using latest backports now, needs this new logic. */
			struct cfg80211_scan_info info = {
				.aborted = (ar->scan.state ==
					    ATH10K_SCAN_ABORTING),
			};

			ieee80211_scan_completed(ar->hw, &info);
#else
			ieee80211_scan_completed(ar->hw,
						 (ar->scan.state ==
						  ATH10K_SCAN_ABORTING));
#endif
		}
		else if (ar->scan.roc_notify) {
			ieee80211_remain_on_channel_expired(ar->hw);
		}
		/* fall through */
	case ATH10K_SCAN_STARTING:
		ar->scan.state = ATH10K_SCAN_IDLE;
		ar->scan_channel = NULL;
		ar->scan.roc_freq = 0;
		ath10k_offchan_tx_purge(ar);
		cancel_delayed_work(&ar->scan.timeout);
		complete_all(&ar->scan.completed);
		break;
	}
}

void ath10k_scan_finish(struct ath10k *ar)
{
	spin_lock_bh(&ar->data_lock);
	__ath10k_scan_finish(ar);
	spin_unlock_bh(&ar->data_lock);
}

static int ath10k_scan_stop(struct ath10k *ar)
{
	struct wmi_stop_scan_arg arg = {
		.req_id = 1, /* FIXME */
		.req_type = WMI_SCAN_STOP_ONE,
		.u.scan_id = ATH10K_SCAN_ID,
	};
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	ret = ath10k_wmi_stop_scan(ar, &arg);
	if (ret) {
		ath10k_warn(ar, "failed to stop wmi scan: %d\n", ret);
		goto out;
	}

	ret = wait_for_completion_timeout(&ar->scan.completed, 3 * HZ);
	if (ret == 0) {
		ath10k_warn(ar, "failed to receive scan abortion completion: timed out\n");
		ret = -ETIMEDOUT;
	} else if (ret > 0) {
		ret = 0;
	}

out:
	/* Scan state should be updated upon scan completion but in case
	 * firmware fails to deliver the event (for whatever reason) it is
	 * desired to clean up scan state anyway. Firmware may have just
	 * dropped the scan completion event delivery due to transport pipe
	 * being overflown with data and/or it can recover on its own before
	 * next scan request is submitted.
	 */
	spin_lock_bh(&ar->data_lock);
	if (ar->scan.state != ATH10K_SCAN_IDLE)
		__ath10k_scan_finish(ar);
	spin_unlock_bh(&ar->data_lock);

	return ret;
}

static void ath10k_scan_abort(struct ath10k *ar)
{
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	spin_lock_bh(&ar->data_lock);

	switch (ar->scan.state) {
	case ATH10K_SCAN_IDLE:
		/* This can happen if timeout worker kicked in and called
		 * abortion while scan completion was being processed.
		 */
		break;
	case ATH10K_SCAN_STARTING:
	case ATH10K_SCAN_ABORTING:
		ath10k_warn(ar, "refusing scan abortion due to invalid scan state: %s (%d)\n",
			    ath10k_scan_state_str(ar->scan.state),
			    ar->scan.state);
		break;
	case ATH10K_SCAN_RUNNING:
		ar->scan.state = ATH10K_SCAN_ABORTING;
		spin_unlock_bh(&ar->data_lock);

		ret = ath10k_scan_stop(ar);
		if (ret)
			ath10k_warn(ar, "failed to abort scan: %d\n", ret);

		spin_lock_bh(&ar->data_lock);
		break;
	}

	spin_unlock_bh(&ar->data_lock);
}

void ath10k_scan_timeout_work(struct work_struct *work)
{
	struct ath10k *ar = container_of(work, struct ath10k,
					 scan.timeout.work);

	mutex_lock(&ar->conf_mutex);
	ath10k_scan_abort(ar);
	mutex_unlock(&ar->conf_mutex);
}

static int ath10k_start_scan(struct ath10k *ar,
			     const struct wmi_start_scan_arg *arg)
{
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	ath10k_dbg(ar, ATH10K_DBG_MAC, "start-scan, flags: 0x%x\n",
		   arg->scan_ctrl_flags);
	ret = ath10k_wmi_start_scan(ar, arg);
	if (ret)
		return ret;

	ret = wait_for_completion_timeout(&ar->scan.started, 1 * HZ);
	if (ret == 0) {
		ret = ath10k_scan_stop(ar);
		if (ret)
			ath10k_warn(ar, "failed to stop scan: %d\n", ret);

		return -ETIMEDOUT;
	}

	/* If we failed to start the scan, return error code at
	 * this point.  This is probably due to some issue in the
	 * firmware, but no need to wedge the driver due to that...
	 */
	spin_lock_bh(&ar->data_lock);
	if (ar->scan.state == ATH10K_SCAN_IDLE) {
		spin_unlock_bh(&ar->data_lock);
		return -EINVAL;
	}
	spin_unlock_bh(&ar->data_lock);

	return 0;
}

/**********************/
/* mac80211 callbacks */
/**********************/

static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
			     struct ieee80211_tx_control *control,
			     struct sk_buff *skb)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_htt *htt = &ar->htt;
	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
	struct ieee80211_vif *vif = info->control.vif;
	struct ieee80211_sta *sta = control->sta;
	struct ieee80211_txq *txq = NULL;
	struct ieee80211_hdr *hdr = (void *)skb->data;
	enum ath10k_hw_txrx_mode txmode;
	enum ath10k_mac_tx_path txpath;
	bool is_htt;
	bool is_mgmt;
	bool is_presp;
	int ret;

	ath10k_mac_tx_h_fill_cb(ar, vif, txq, skb);

	txmode = ath10k_mac_tx_h_get_txmode(ar, vif, sta, skb);
	txpath = ath10k_mac_tx_h_get_txpath(ar, skb, txmode);
	is_htt = (txpath == ATH10K_MAC_TX_HTT ||
		  txpath == ATH10K_MAC_TX_HTT_MGMT);
	is_mgmt = (txpath == ATH10K_MAC_TX_HTT_MGMT);

	if (is_htt) {
		spin_lock_bh(&ar->htt.tx_lock);
		is_presp = ieee80211_is_probe_resp(hdr->frame_control);

		ret = ath10k_htt_tx_inc_pending(htt);
		if (ret) {
			ath10k_warn(ar, "failed to increase tx pending count: %d, dropping\n",
				    ret);
			spin_unlock_bh(&ar->htt.tx_lock);
			ieee80211_free_txskb(ar->hw, skb);
			return;
		}

		ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt, is_presp);
		if (ret) {
			ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
				   ret);
			ath10k_htt_tx_dec_pending(htt);
			spin_unlock_bh(&ar->htt.tx_lock);
			ieee80211_free_txskb(ar->hw, skb);
			return;
		}
		spin_unlock_bh(&ar->htt.tx_lock);
	}

	ret = ath10k_mac_tx(ar, vif, sta, txmode, txpath, skb);
	if (ret) {
		ath10k_warn(ar, "failed to transmit frame: %d\n", ret);
		if (is_htt) {
			spin_lock_bh(&ar->htt.tx_lock);
			ath10k_htt_tx_dec_pending(htt);
			if (is_mgmt)
				ath10k_htt_tx_mgmt_dec_pending(htt);
			spin_unlock_bh(&ar->htt.tx_lock);
		}
		return;
	}
}

static void ath10k_mac_op_wake_tx_queue(struct ieee80211_hw *hw,
					struct ieee80211_txq *txq)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_txq *artxq = (void *)txq->drv_priv;

	spin_lock_bh(&ar->txqs_lock);
	if (list_empty(&artxq->list))
		list_add_tail(&artxq->list, &ar->txqs);
	spin_unlock_bh(&ar->txqs_lock);

	if (ath10k_mac_tx_can_push(hw, txq))
		tasklet_schedule(&ar->htt.txrx_compl_task);

	ath10k_htt_tx_txq_update(hw, txq);
}

/* Must not be called with conf_mutex held as workers can use that also. */
void ath10k_drain_tx(struct ath10k *ar)
{
	/* make sure rcu-protected mac80211 tx path itself is drained */
	synchronize_net();

	ath10k_offchan_tx_purge(ar);
	ath10k_mgmt_over_wmi_tx_purge(ar);

	cancel_work_sync(&ar->offchan_tx_work);
	cancel_work_sync(&ar->wmi_mgmt_tx_work);
}

void ath10k_halt(struct ath10k *ar)
{
	struct ath10k_vif *arvif;

	lockdep_assert_held(&ar->conf_mutex);

	clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
	ar->filter_flags = 0;
	ar->monitor = false;
	ar->monitor_arvif = NULL;

	if (ar->monitor_started)
		ath10k_monitor_stop(ar);

	ar->monitor_started = false;
	ar->tx_paused = 0;

	ath10k_scan_finish(ar);
	ath10k_peer_cleanup_all(ar);
	ath10k_core_stop(ar);
	ath10k_hif_power_down(ar);

	spin_lock_bh(&ar->data_lock);
	list_for_each_entry(arvif, &ar->arvifs, list)
		ath10k_mac_vif_beacon_cleanup(arvif);
	spin_unlock_bh(&ar->data_lock);
}

static int ath10k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
{
	struct ath10k *ar = hw->priv;

	mutex_lock(&ar->conf_mutex);

	*tx_ant = ar->cfg_tx_chainmask;
	*rx_ant = ar->cfg_rx_chainmask;

	mutex_unlock(&ar->conf_mutex);

	return 0;
}

static void ath10k_check_chain_mask(struct ath10k *ar, u32 cm, const char *dbg)
{
	/* It is not clear that allowing gaps in chainmask
	 * is helpful.  Probably it will not do what user
	 * is hoping for, so warn in that case.
	 */
	if (cm == 15 || cm == 7 || cm == 3 || cm == 1 || cm == 0)
		return;

	ath10k_warn(ar, "mac %s antenna chainmask may be invalid: 0x%x.  Suggested values: 15, 7, 3, 1 or 0.\n",
		    dbg, cm);
}

static int ath10k_mac_get_vht_cap_bf_sts(struct ath10k *ar)
{
	int nsts = ar->vht_cap_info;

	nsts &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
	nsts >>= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;

	/* If firmware does not deliver to host number of space-time
	 * streams supported, assume it support up to 4 BF STS and return
	 * the value for VHT CAP: nsts-1)
	 */
	if (nsts == 0)
		return 3;

	return nsts;
}

static int ath10k_mac_get_vht_cap_bf_sound_dim(struct ath10k *ar)
{
	int sound_dim = ar->vht_cap_info;

	sound_dim &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;
	sound_dim >>= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;

	/* If the sounding dimension is not advertised by the firmware,
	 * let's use a default value of 1
	 */
	if (sound_dim == 0)
		return 1;

	return sound_dim;
}

static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
{
	struct ieee80211_sta_vht_cap vht_cap = {0};
	u16 mcs_map;
	u32 val;
	int i;

	vht_cap.vht_supported = 1;
	vht_cap.cap = ar->vht_cap_info;

	if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
				IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) {
		val = ath10k_mac_get_vht_cap_bf_sts(ar);
		val <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
		val &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;

		vht_cap.cap |= val;
	}

	if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
				IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) {
		val = ath10k_mac_get_vht_cap_bf_sound_dim(ar);
		val <<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
		val &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;

		vht_cap.cap |= val;
	}

	if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) &&
	    ((ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == 0)) {
		vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
	}

	mcs_map = 0;
	for (i = 0; i < 8; i++) {
		if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
			mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i * 2);
		else
			mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i * 2);
	}

	vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
	vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);

	/* If we are supporting 160Mhz or 80+80, then the NIC may be able to do a restricted NSS
	 * for 160 or 80+80 vs what it can do for 80Mhz.  Give user-space a clue if that is the
	 * case.
	 */
	if (vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
		/* Something more than 80Mhz at least */
		if (ar->dev_id == QCA9984_1_0_DEVICE_ID) {
			/* Can do only 2x2 VHT160 or 80+80.
			 * 1560Mbps is 4x4 80Mhz or 2x2 160Mhz, long-guard-interval
			 */
			vht_cap.vht_mcs.rx_highest = 1560;
			vht_cap.vht_mcs.tx_highest = 1560;
		}
	}

	return vht_cap;
}

static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
{
	int i;
	struct ieee80211_sta_ht_cap ht_cap = {0};

	if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED))
		return ht_cap;

	ht_cap.ht_supported = 1;
	ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
	ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
	ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
	ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
	ht_cap.cap |=
		WLAN_HT_CAP_SM_PS_DISABLED << IEEE80211_HT_CAP_SM_PS_SHIFT;

	if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI)
		ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;

	if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI)
		ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;

	if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) {
		u32 smps;

		smps   = WLAN_HT_CAP_SM_PS_DYNAMIC;
		smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;

		ht_cap.cap |= smps;
	}

	if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC)
		ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;

	if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {
		u32 stbc;

		stbc   = ar->ht_cap_info;
		stbc  &= WMI_HT_CAP_RX_STBC;
		stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT;
		stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT;
		stbc  &= IEEE80211_HT_CAP_RX_STBC;

		ht_cap.cap |= stbc;
	}

	if (ar->ht_cap_info & WMI_HT_CAP_LDPC)
		ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;

	if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT)
		ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT;

	/* max AMSDU is implicitly taken from vht_cap_info */
	if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
		ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;

	for (i = 0; i < ar->num_rf_chains; i++) {
		if (ar->cfg_rx_chainmask & BIT(i))
			ht_cap.mcs.rx_mask[i] = 0xFF;
	}

	ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;

	return ht_cap;
}

static void ath10k_mac_setup_ht_vht_cap(struct ath10k *ar)
{
	struct ieee80211_supported_band *band;
	struct ieee80211_sta_vht_cap vht_cap;
	struct ieee80211_sta_ht_cap ht_cap;

	ht_cap = ath10k_get_ht_cap(ar);
	vht_cap = ath10k_create_vht_cap(ar);

	if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
		band = &ar->mac.sbands[NL80211_BAND_2GHZ];
		band->ht_cap = ht_cap;

		/* Enable the VHT support at 2.4 GHz */
		band->vht_cap = vht_cap;
	}
	if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
		band = &ar->mac.sbands[NL80211_BAND_5GHZ];
		band->ht_cap = ht_cap;
		band->vht_cap = vht_cap;
	}
}

static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant)
{
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	ath10k_check_chain_mask(ar, tx_ant, "tx");
	ath10k_check_chain_mask(ar, rx_ant, "rx");

	ar->cfg_tx_chainmask = tx_ant;
	ar->cfg_rx_chainmask = rx_ant;

	if ((ar->state != ATH10K_STATE_ON) &&
	    (ar->state != ATH10K_STATE_RESTARTED))
		return 0;

	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_chain_mask,
					tx_ant);
	if (ret) {
		ath10k_warn(ar, "failed to set tx-chainmask: %d, req 0x%x\n",
			    ret, tx_ant);
		return ret;
	}

	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->rx_chain_mask,
					rx_ant);
	if (ret) {
		ath10k_warn(ar, "failed to set rx-chainmask: %d, req 0x%x\n",
			    ret, rx_ant);
		return ret;
	}

	/* Reload HT/VHT capability */
	ath10k_mac_setup_ht_vht_cap(ar);

	return 0;
}

static int ath10k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
{
	struct ath10k *ar = hw->priv;
	int ret;

	mutex_lock(&ar->conf_mutex);
	ret = __ath10k_set_antenna(ar, tx_ant, rx_ant);
	mutex_unlock(&ar->conf_mutex);
	return ret;
}

static int ath10k_start(struct ieee80211_hw *hw)
{
	struct ath10k *ar = hw->priv;
	u32 param;
	int ret = 0;

	/*
	 * This makes sense only when restarting hw. It is harmless to call
	 * unconditionally. This is necessary to make sure no HTT/WMI tx
	 * commands will be submitted while restarting.
	 */
	ath10k_drain_tx(ar);

	mutex_lock(&ar->conf_mutex);

	switch (ar->state) {
	case ATH10K_STATE_OFF:
		ar->state = ATH10K_STATE_ON;
		break;
	case ATH10K_STATE_RESTARTING:
		ath10k_halt(ar);
		ar->state = ATH10K_STATE_RESTARTED;
		break;
	case ATH10K_STATE_ON:
	case ATH10K_STATE_RESTARTED:
	case ATH10K_STATE_WEDGED:
		WARN_ON(1);
		ret = -EINVAL;
		goto err;
	case ATH10K_STATE_UTF:
		ret = -EBUSY;
		goto err;
	}

	ret = ath10k_hif_power_up(ar);
	if (ret) {
		ath10k_err(ar, "Could not init hif: %d\n", ret);
		goto err_off;
	}

	ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL,
				&ar->normal_mode_fw);
	if (ret) {
		ath10k_err(ar, "Could not init core: %d\n", ret);
		goto err_power_down;
	}

	param = ar->wmi.pdev_param->pmf_qos;
	ret = ath10k_wmi_pdev_set_param(ar, param, 1);
	if (ret) {
		ath10k_warn(ar, "failed to enable PMF QOS: %d\n", ret);
		goto err_core_stop;
	}

	param = ar->wmi.pdev_param->dynamic_bw;
	ret = ath10k_wmi_pdev_set_param(ar, param, 1);
	if (ret) {
		ath10k_warn(ar, "failed to enable dynamic BW: %d\n", ret);
		goto err_core_stop;
	}

	if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
		ret = ath10k_wmi_adaptive_qcs(ar, true);
		if (ret) {
			ath10k_warn(ar, "failed to enable adaptive qcs: %d\n",
				    ret);
			goto err_core_stop;
		}
	}

	if (test_bit(WMI_SERVICE_BURST, ar->wmi.svc_map)) {
		param = ar->wmi.pdev_param->burst_enable;
		ret = ath10k_wmi_pdev_set_param(ar, param, 0);
		if (ret) {
			ath10k_warn(ar, "failed to disable burst: %d\n", ret);
			goto err_core_stop;
		}
	}

	__ath10k_set_antenna(ar, ar->cfg_tx_chainmask, ar->cfg_rx_chainmask);

	/*
	 * By default FW set ARP frames ac to voice (6). In that case ARP
	 * exchange is not working properly for UAPSD enabled AP. ARP requests
	 * which arrives with access category 0 are processed by network stack
	 * and send back with access category 0, but FW changes access category
	 * to 6. Set ARP frames access category to best effort (0) solves
	 * this problem.
	 */

	param = ar->wmi.pdev_param->arp_ac_override;
	ret = ath10k_wmi_pdev_set_param(ar, param, 0);
	if (ret) {
		ath10k_warn(ar, "failed to set arp ac override parameter: %d\n",
			    ret);
		goto err_core_stop;
	}

	if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA,
		     ar->running_fw->fw_file.fw_features)) {
		ret = ath10k_wmi_pdev_enable_adaptive_cca(ar, 1,
							  WMI_CCA_DETECT_LEVEL_AUTO,
							  WMI_CCA_DETECT_MARGIN_AUTO);
		if (ret) {
			ath10k_warn(ar, "failed to enable adaptive cca: %d\n",
				    ret);
			goto err_core_stop;
		}
	}

	param = ar->wmi.pdev_param->ani_enable;
	ret = ath10k_wmi_pdev_set_param(ar, param, 1);
	if (ret) {
		ath10k_warn(ar, "failed to enable ani by default: %d\n",
			    ret);
		goto err_core_stop;
	}

	ar->ani_enabled = true;

	if (ath10k_peer_stats_enabled(ar)) {
		param = ar->wmi.pdev_param->peer_stats_update_period;
		ret = ath10k_wmi_pdev_set_param(ar, param,
						PEER_DEFAULT_STATS_UPDATE_PERIOD);
		if (ret) {
			ath10k_warn(ar,
				    "failed to set peer stats period : %d\n",
				    ret);
			goto err_core_stop;
		}
	}

	ar->num_started_vdevs = 0;
	ath10k_regd_update(ar);

	ath10k_spectral_start(ar);
	ath10k_thermal_set_throttling(ar);

	mutex_unlock(&ar->conf_mutex);
	return 0;

err_core_stop:
	ath10k_core_stop(ar);

err_power_down:
	ath10k_hif_power_down(ar);

err_off:
	ar->state = ATH10K_STATE_OFF;

err:
	mutex_unlock(&ar->conf_mutex);
	return ret;
}

static void ath10k_stop(struct ieee80211_hw *hw)
{
	struct ath10k *ar = hw->priv;

	ath10k_drain_tx(ar);

	mutex_lock(&ar->conf_mutex);
	if (ar->state != ATH10K_STATE_OFF) {
		ath10k_halt(ar);
		ar->state = ATH10K_STATE_OFF;
	}
	mutex_unlock(&ar->conf_mutex);

	cancel_delayed_work_sync(&ar->scan.timeout);
	cancel_work_sync(&ar->restart_work);
}

static int ath10k_config_ps(struct ath10k *ar)
{
	struct ath10k_vif *arvif;
	int ret = 0;

	lockdep_assert_held(&ar->conf_mutex);

	list_for_each_entry(arvif, &ar->arvifs, list) {
		ret = ath10k_mac_vif_setup_ps(arvif);
		if (ret) {
			ath10k_warn(ar, "failed to setup powersave: %d\n", ret);
			break;
		}
	}

	return ret;
}

static int ath10k_mac_txpower_setup(struct ath10k *ar, int txpower)
{
	int ret;
	u32 param;

	lockdep_assert_held(&ar->conf_mutex);

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac txpower %d\n", txpower);

	param = ar->wmi.pdev_param->txpower_limit2g;
	ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2);
	if (ret) {
		ath10k_warn(ar, "failed to set 2g txpower %d: %d\n",
			    txpower, ret);
		return ret;
	}

	param = ar->wmi.pdev_param->txpower_limit5g;
	ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2);
	if (ret) {
		ath10k_warn(ar, "failed to set 5g txpower %d: %d\n",
			    txpower, ret);
		return ret;
	}

	return 0;
}

static int ath10k_mac_txpower_recalc(struct ath10k *ar)
{
	struct ath10k_vif *arvif;
	int ret, txpower = -1;

	lockdep_assert_held(&ar->conf_mutex);

	list_for_each_entry(arvif, &ar->arvifs, list) {
		WARN_ON(arvif->txpower < 0);

		if (txpower == -1)
			txpower = arvif->txpower;
		else
			txpower = min(txpower, arvif->txpower);
	}

	if (WARN_ON(txpower == -1))
		return -EINVAL;

	ret = ath10k_mac_txpower_setup(ar, txpower);
	if (ret) {
		ath10k_warn(ar, "failed to setup tx power %d: %d\n",
			    txpower, ret);
		return ret;
	}

	return 0;
}

static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
{
	struct ath10k *ar = hw->priv;
	struct ieee80211_conf *conf = &hw->conf;
	int ret = 0;

	mutex_lock(&ar->conf_mutex);

	if (changed & IEEE80211_CONF_CHANGE_PS)
		ath10k_config_ps(ar);

	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
		ar->monitor = conf->flags & IEEE80211_CONF_MONITOR;
		ret = ath10k_monitor_recalc(ar);
		if (ret)
			ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
	}

	mutex_unlock(&ar->conf_mutex);
	return ret;
}

static int ath10k_mac_set_txbf_conf(struct ath10k_vif *arvif)
{
	u32 value = 0;
	struct ath10k *ar = arvif->ar;
	struct ieee80211_vif *vif = arvif->vif;
	int nsts;
	int sound_dim;

	if (ath10k_wmi_get_txbf_conf_scheme(ar) != WMI_TXBF_CONF_BEFORE_ASSOC)
		return 0;

	nsts = ath10k_mac_get_vht_cap_bf_sts(ar);
	if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
				IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE))
		value |= SM(nsts, WMI_TXBF_STS_CAP_OFFSET);

	sound_dim = ath10k_mac_get_vht_cap_bf_sound_dim(ar);
	if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
				IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE))
		value |= SM(sound_dim, WMI_BF_SOUND_DIM_OFFSET);

	if (!value)
		return 0;

	if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE) &&
	    (vif->type != NL80211_IFTYPE_STATION))
		value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER;

	if ((ar->vht_cap_info & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE) &&
	    (vif->type != NL80211_IFTYPE_STATION))
		value |= (WMI_VDEV_PARAM_TXBF_MU_TX_BFER |
			  WMI_VDEV_PARAM_TXBF_SU_TX_BFER);

	if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) &&
	    (vif->type == NL80211_IFTYPE_STATION))
		value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE;

	if ((ar->vht_cap_info & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) &&
		(vif->type == NL80211_IFTYPE_STATION))
		value |= (WMI_VDEV_PARAM_TXBF_MU_TX_BFEE |
			  WMI_VDEV_PARAM_TXBF_SU_TX_BFEE);

	return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
					 ar->wmi.vdev_param->txbf, value);
}

/*
 * TODO:
 * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE,
 * because we will send mgmt frames without CCK. This requirement
 * for P2P_FIND/GO_NEG should be handled by checking CCK flag
 * in the TX packet.
 */
static int ath10k_add_interface(struct ieee80211_hw *hw,
				struct ieee80211_vif *vif)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct ath10k_peer *peer;
	enum wmi_sta_powersave_param param;
	int ret = 0;
	u32 value;
	int bit;
	int i;
	u32 vdev_param;

	vif->driver_flags |= IEEE80211_VIF_SUPPORTS_UAPSD;

	mutex_lock(&ar->conf_mutex);

	memset(arvif, 0, sizeof(*arvif));
	ath10k_mac_txq_init(ar, vif->txq);

	memset(&arvif->bcast_rate, WMI_FIXED_RATE_NONE, sizeof(arvif->bcast_rate));
	memset(&arvif->mcast_rate, WMI_FIXED_RATE_NONE, sizeof(arvif->mcast_rate));
	memset(&arvif->mgt_rate, WMI_FIXED_RATE_NONE, sizeof(arvif->mgt_rate));

	arvif->ar = ar;
	arvif->vif = vif;

	INIT_LIST_HEAD(&arvif->list);
	INIT_WORK(&arvif->ap_csa_work, ath10k_mac_vif_ap_csa_work);
	INIT_DELAYED_WORK(&arvif->connection_loss_work,
			  ath10k_mac_vif_sta_connection_loss_work);

	for (i = 0; i < ARRAY_SIZE(arvif->bitrate_mask.control); i++) {
		arvif->bitrate_mask.control[i].legacy = 0xffffffff;
		memset(arvif->bitrate_mask.control[i].ht_mcs, 0xff,
		       sizeof(arvif->bitrate_mask.control[i].ht_mcs));
		memset(arvif->bitrate_mask.control[i].vht_mcs, 0xff,
		       sizeof(arvif->bitrate_mask.control[i].vht_mcs));
	}

	if (ar->num_peers >= ar->max_num_peers) {
		ath10k_warn(ar, "refusing vdev creation due to insufficient peer entry resources in firmware\n");
		ret = -ENOBUFS;
		goto err;
	}

	if (ar->free_vdev_map == 0) {
		ath10k_warn(ar, "Free vdev map is empty, no more interfaces allowed.\n");
		ret = -EBUSY;
		goto err;
	}
	bit = __ffs64(ar->free_vdev_map);

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac create vdev %i map %llx\n",
		   bit, ar->free_vdev_map);

	arvif->vdev_id = bit;
	arvif->vdev_subtype =
		ath10k_wmi_get_vdev_subtype(ar, WMI_VDEV_SUBTYPE_NONE);

	switch (vif->type) {
	case NL80211_IFTYPE_P2P_DEVICE:
		arvif->vdev_type = WMI_VDEV_TYPE_STA;
		arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
					(ar, WMI_VDEV_SUBTYPE_P2P_DEVICE);
		break;
	case NL80211_IFTYPE_UNSPECIFIED:
	case NL80211_IFTYPE_STATION:
		arvif->vdev_type = WMI_VDEV_TYPE_STA;
		if (vif->p2p)
			arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
					(ar, WMI_VDEV_SUBTYPE_P2P_CLIENT);
		break;
	case NL80211_IFTYPE_ADHOC:
		arvif->vdev_type = WMI_VDEV_TYPE_IBSS;
		break;
	case NL80211_IFTYPE_MESH_POINT:
		if (test_bit(WMI_SERVICE_MESH_11S, ar->wmi.svc_map)) {
			arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
						(ar, WMI_VDEV_SUBTYPE_MESH_11S);
		} else if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
			ret = -EINVAL;
			ath10k_warn(ar, "must load driver with rawmode=1 to add mesh interfaces\n");
			goto err;
		}
		arvif->vdev_type = WMI_VDEV_TYPE_AP;
		break;
	case NL80211_IFTYPE_AP:
		arvif->vdev_type = WMI_VDEV_TYPE_AP;

		if (vif->p2p)
			arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
						(ar, WMI_VDEV_SUBTYPE_P2P_GO);
		break;
	case NL80211_IFTYPE_MONITOR:
		arvif->vdev_type = WMI_VDEV_TYPE_MONITOR;
		break;
	default:
		WARN_ON(1);
		break;
	}

	/* Using vdev_id as queue number will make it very easy to do per-vif
	 * tx queue locking. This shouldn't wrap due to interface combinations
	 * but do a modulo for correctness sake and prevent using offchannel tx
	 * queues for regular vif tx.
	 */
	vif->cab_queue = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1);
	for (i = 0; i < ARRAY_SIZE(vif->hw_queue); i++)
		vif->hw_queue[i] = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1);

	/* Some firmware revisions don't wait for beacon tx completion before
	 * sending another SWBA event. This could lead to hardware using old
	 * (freed) beacon data in some cases, e.g. tx credit starvation
	 * combined with missed TBTT. This is very very rare.
	 *
	 * On non-IOMMU-enabled hosts this could be a possible security issue
	 * because hw could beacon some random data on the air.  On
	 * IOMMU-enabled hosts DMAR faults would occur in most cases and target
	 * device would crash.
	 *
	 * Since there are no beacon tx completions (implicit nor explicit)
	 * propagated to host the only workaround for this is to allocate a
	 * DMA-coherent buffer for a lifetime of a vif and use it for all
	 * beacon tx commands. Worst case for this approach is some beacons may
	 * become corrupted, e.g. have garbled IEs or out-of-date TIM bitmap.
	 */
	if (vif->type == NL80211_IFTYPE_ADHOC ||
	    vif->type == NL80211_IFTYPE_MESH_POINT ||
	    vif->type == NL80211_IFTYPE_AP) {
		arvif->beacon_buf = dma_zalloc_coherent(ar->dev,
							IEEE80211_MAX_FRAME_LEN,
							&arvif->beacon_paddr,
							GFP_ATOMIC);
		if (!arvif->beacon_buf) {
			ret = -ENOMEM;
			ath10k_warn(ar, "failed to allocate beacon buffer: %d\n",
				    ret);
			goto err;
		}
	}
	if (test_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags))
		arvif->nohwcrypt = true;

	if (arvif->nohwcrypt &&
	    !test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
		ath10k_warn(ar, "cryptmode module param needed for sw crypto\n");
		goto err;
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d bcnmode %s\n",
		   arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype,
		   arvif->beacon_buf ? "single-buf" : "per-skb");

	ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
				     arvif->vdev_subtype, vif->addr);
	if (ret) {
		ath10k_warn(ar, "failed to create WMI vdev %i: %d\n",
			    arvif->vdev_id, ret);
		goto err;
	}

	ar->free_vdev_map &= ~(1LL << arvif->vdev_id);
	spin_lock_bh(&ar->data_lock);
	list_add(&arvif->list, &ar->arvifs);
	spin_unlock_bh(&ar->data_lock);

	/* It makes no sense to have firmware do keepalives. mac80211 already
	 * takes care of this with idle connection polling.
	 */
	ret = ath10k_mac_vif_disable_keepalive(arvif);
	if (ret) {
		ath10k_warn(ar, "failed to disable keepalive on vdev %i: %d\n",
			    arvif->vdev_id, ret);
		goto err_vdev_delete;
	}

	arvif->def_wep_key_idx = -1;

	vdev_param = ar->wmi.vdev_param->tx_encap_type;
	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
					ATH10K_HW_TXRX_NATIVE_WIFI);
	/* 10.X firmware does not support this VDEV parameter. Do not warn */
	if (ret && ret != -EOPNOTSUPP) {
		ath10k_warn(ar, "failed to set vdev %i TX encapsulation: %d\n",
			    arvif->vdev_id, ret);
		goto err_vdev_delete;
	}

	/* Configuring number of spatial stream for monitor interface is causing
	 * target assert in qca9888 and qca6174.
	 */
	if (ar->cfg_tx_chainmask && (vif->type != NL80211_IFTYPE_MONITOR)) {
		u16 nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);

		vdev_param = ar->wmi.vdev_param->nss;
		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
						nss);
		if (ret) {
			ath10k_warn(ar, "failed to set vdev %i chainmask 0x%x, nss %i: %d\n",
				    arvif->vdev_id, ar->cfg_tx_chainmask, nss,
				    ret);
			goto err_vdev_delete;
		}
	}

	if (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
	    arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
		ret = ath10k_peer_create(ar, vif, NULL, arvif->vdev_id,
					 vif->addr, WMI_PEER_TYPE_DEFAULT);
		if (ret) {
			ath10k_warn(ar, "failed to create vdev %i peer for AP/IBSS: %d\n",
				    arvif->vdev_id, ret);
			goto err_vdev_delete;
		}

		spin_lock_bh(&ar->data_lock);

		peer = ath10k_peer_find(ar, arvif->vdev_id, vif->addr);
		if (!peer) {
			ath10k_warn(ar, "failed to lookup peer %pM on vdev %i\n",
				    vif->addr, arvif->vdev_id);
			spin_unlock_bh(&ar->data_lock);
			ret = -ENOENT;
			goto err_peer_delete;
		}

		arvif->peer_id = find_first_bit(peer->peer_ids,
						ATH10K_MAX_NUM_PEER_IDS);

		spin_unlock_bh(&ar->data_lock);
	} else {
		arvif->peer_id = HTT_INVALID_PEERID;
	}

	ret = ath10k_mac_set_pdev_kickout(ar);
	if (ret)
		return ret;

	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
		ret = ath10k_mac_set_kickout(arvif);
		if (ret) {
			ath10k_warn(ar, "failed to set vdev %i kickout parameters: %d\n",
				    arvif->vdev_id, ret);
			goto err_peer_delete;
		}
	}

	if (arvif->vdev_type == WMI_VDEV_TYPE_STA) {
		param = WMI_STA_PS_PARAM_RX_WAKE_POLICY;
		value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
						  param, value);
		if (ret) {
			ath10k_warn(ar, "failed to set vdev %i RX wake policy: %d\n",
				    arvif->vdev_id, ret);
			goto err_peer_delete;
		}

		ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
		if (ret) {
			ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
				    arvif->vdev_id, ret);
			goto err_peer_delete;
		}

		ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
		if (ret) {
			ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
				    arvif->vdev_id, ret);
			goto err_peer_delete;
		}
	}

	ret = ath10k_mac_set_txbf_conf(arvif);
	if (ret) {
		ath10k_warn(ar, "failed to set txbf for vdev %d: %d\n",
			    arvif->vdev_id, ret);
		goto err_peer_delete;
	}

	ret = ath10k_mac_set_rts(arvif, ar->hw->wiphy->rts_threshold);
	if (ret) {
		ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n",
			    arvif->vdev_id, ret);
		goto err_peer_delete;
	}

	arvif->txpower = vif->bss_conf.txpower;
	ret = ath10k_mac_txpower_recalc(ar);
	if (ret) {
		ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
		goto err_peer_delete;
	}

	if (vif->type == NL80211_IFTYPE_MONITOR) {
		ar->monitor_arvif = arvif;
		ret = ath10k_monitor_recalc(ar);
		if (ret) {
			ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
			goto err_peer_delete;
		}
	}

	spin_lock_bh(&ar->htt.tx_lock);
	if (!ar->tx_paused)
		ieee80211_wake_queue(ar->hw, arvif->vdev_id);
	spin_unlock_bh(&ar->htt.tx_lock);

	mutex_unlock(&ar->conf_mutex);
	return 0;

err_peer_delete:
	if (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
	    arvif->vdev_type == WMI_VDEV_TYPE_IBSS)
		ath10k_wmi_peer_delete(ar, arvif->vdev_id, vif->addr);

err_vdev_delete:
	ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
	ar->free_vdev_map |= 1LL << arvif->vdev_id;
	spin_lock_bh(&ar->data_lock);
	list_del(&arvif->list);
	spin_unlock_bh(&ar->data_lock);

err:
	if (arvif->beacon_buf) {
		dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
				  arvif->beacon_buf, arvif->beacon_paddr);
		arvif->beacon_buf = NULL;
	}

	mutex_unlock(&ar->conf_mutex);

	return ret;
}

static void ath10k_mac_vif_tx_unlock_all(struct ath10k_vif *arvif)
{
	int i;

	for (i = 0; i < BITS_PER_LONG; i++)
		ath10k_mac_vif_tx_unlock(arvif, i);
}

static void ath10k_remove_interface(struct ieee80211_hw *hw,
				    struct ieee80211_vif *vif)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct ath10k_peer *peer;
	int ret;
	int i;

	cancel_work_sync(&arvif->ap_csa_work);
	cancel_delayed_work_sync(&arvif->connection_loss_work);

	mutex_lock(&ar->conf_mutex);

	spin_lock_bh(&ar->data_lock);
	ath10k_mac_vif_beacon_cleanup(arvif);
	spin_unlock_bh(&ar->data_lock);

	ret = ath10k_spectral_vif_stop(arvif);
	if (ret)
		ath10k_warn(ar, "failed to stop spectral for vdev %i: %d\n",
			    arvif->vdev_id, ret);

	ar->free_vdev_map |= 1LL << arvif->vdev_id;
	spin_lock_bh(&ar->data_lock);
	list_del(&arvif->list);
	spin_unlock_bh(&ar->data_lock);

	if (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
	    arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
		ret = ath10k_wmi_peer_delete(arvif->ar, arvif->vdev_id,
					     vif->addr);
		if (ret)
			ath10k_warn(ar, "failed to submit AP/IBSS self-peer removal on vdev %i: %d\n",
				    arvif->vdev_id, ret);

		kfree(arvif->u.ap.noa_data);
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC,
		   "mac vdev %i delete (remove interface), vif: %p  arvif: %p\n",
		   arvif->vdev_id, vif, arvif);

	ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
	if (ret)
		ath10k_warn(ar, "failed to delete WMI vdev %i: %d\n",
			    arvif->vdev_id, ret);

	/* Some firmware revisions don't notify host about self-peer removal
	 * until after associated vdev is deleted.
	 */
	if (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
	    arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
		ret = ath10k_wait_for_peer_deleted(ar, arvif->vdev_id,
						   vif->addr);
		if (ret)
			ath10k_warn(ar, "failed to remove AP self-peer on vdev %i: %d\n",
				    arvif->vdev_id, ret);

		spin_lock_bh(&ar->data_lock);
		ar->num_peers--;
		spin_unlock_bh(&ar->data_lock);
	}

	spin_lock_bh(&ar->data_lock);
	for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++) {
		peer = ar->peer_map[i];
		if (!peer)
			continue;

		if (peer->vif == vif) {
			ath10k_warn(ar, "found vif peer %pM id: %d entry on vdev %i after it was supposedly removed\n",
				    vif->addr, i, arvif->vdev_id);
			peer->vif = NULL;
		}
	}
	spin_unlock_bh(&ar->data_lock);

	ath10k_peer_cleanup(ar, arvif->vdev_id);
	ath10k_mac_txq_unref(ar, vif->txq);

	if (vif->type == NL80211_IFTYPE_MONITOR) {
		ar->monitor_arvif = NULL;
		ret = ath10k_monitor_recalc(ar);
		if (ret)
			ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
	}

	spin_lock_bh(&ar->htt.tx_lock);
	ath10k_mac_vif_tx_unlock_all(arvif);
	spin_unlock_bh(&ar->htt.tx_lock);

	ath10k_mac_txq_unref(ar, vif->txq);

	mutex_unlock(&ar->conf_mutex);
}

/*
 * FIXME: Has to be verified.
 */
#define SUPPORTED_FILTERS			\
	(FIF_ALLMULTI |				\
	FIF_CONTROL |				\
	FIF_PSPOLL |				\
	FIF_OTHER_BSS |				\
	FIF_BCN_PRBRESP_PROMISC |		\
	FIF_PROBE_REQ |				\
	FIF_FCSFAIL)

static void ath10k_configure_filter(struct ieee80211_hw *hw,
				    unsigned int changed_flags,
				    unsigned int *total_flags,
				    u64 multicast)
{
	struct ath10k *ar = hw->priv;
	int ret;

	mutex_lock(&ar->conf_mutex);

	changed_flags &= SUPPORTED_FILTERS;
	*total_flags &= SUPPORTED_FILTERS;
	ar->filter_flags = *total_flags;

	ret = ath10k_monitor_recalc(ar);
	if (ret)
		ath10k_warn(ar, "failed to recalc montior: %d\n", ret);

	mutex_unlock(&ar->conf_mutex);
}

static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
				    struct ieee80211_vif *vif,
				    struct ieee80211_bss_conf *info,
				    u32 changed)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	int ret = 0;
	u32 vdev_param, pdev_param, slottime, preamble;

	mutex_lock(&ar->conf_mutex);

	if (changed & BSS_CHANGED_IBSS)
		ath10k_control_ibss(arvif, info, vif->addr);

	if (changed & BSS_CHANGED_BEACON_INT) {
		arvif->beacon_interval = info->beacon_int;
		vdev_param = ar->wmi.vdev_param->beacon_interval;
		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
						arvif->beacon_interval);
		ath10k_dbg(ar, ATH10K_DBG_MAC,
			   "mac vdev %d beacon_interval %d\n",
			   arvif->vdev_id, arvif->beacon_interval);

		if (ret)
			ath10k_warn(ar, "failed to set beacon interval for vdev %d: %i\n",
				    arvif->vdev_id, ret);
	}

	if (changed & BSS_CHANGED_BEACON) {
		ath10k_dbg(ar, ATH10K_DBG_MAC,
			   "vdev %d set beacon tx mode to staggered\n",
			   arvif->vdev_id);

		pdev_param = ar->wmi.pdev_param->beacon_tx_mode;
		ret = ath10k_wmi_pdev_set_param(ar, pdev_param,
						WMI_BEACON_STAGGERED_MODE);
		if (ret)
			ath10k_warn(ar, "failed to set beacon mode for vdev %d: %i\n",
				    arvif->vdev_id, ret);

		ret = ath10k_mac_setup_bcn_tmpl(arvif);
		if (ret)
			ath10k_warn(ar, "failed to update beacon template: %d\n",
				    ret);

		if (ieee80211_vif_is_mesh(vif)) {
			/* mesh doesn't use SSID but firmware needs it */
			strncpy(arvif->u.ap.ssid, "mesh",
				sizeof(arvif->u.ap.ssid));
			arvif->u.ap.ssid_len = 4;
		}
	}

	if (changed & BSS_CHANGED_AP_PROBE_RESP) {
		ret = ath10k_mac_setup_prb_tmpl(arvif);
		if (ret)
			ath10k_warn(ar, "failed to setup probe resp template on vdev %i: %d\n",
				    arvif->vdev_id, ret);
	}

	if (changed & (BSS_CHANGED_BEACON_INFO | BSS_CHANGED_BEACON)) {
		arvif->dtim_period = info->dtim_period;

		ath10k_dbg(ar, ATH10K_DBG_MAC,
			   "mac vdev %d dtim_period %d\n",
			   arvif->vdev_id, arvif->dtim_period);

		vdev_param = ar->wmi.vdev_param->dtim_period;
		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
						arvif->dtim_period);
		if (ret)
			ath10k_warn(ar, "failed to set dtim period for vdev %d: %i\n",
				    arvif->vdev_id, ret);
	}

	if (changed & BSS_CHANGED_SSID &&
	    vif->type == NL80211_IFTYPE_AP) {
		arvif->u.ap.ssid_len = info->ssid_len;
		if (info->ssid_len)
			memcpy(arvif->u.ap.ssid, info->ssid, info->ssid_len);
		arvif->u.ap.hidden_ssid = info->hidden_ssid;
	}

	if (changed & BSS_CHANGED_BSSID && !is_zero_ether_addr(info->bssid))
		ether_addr_copy(arvif->bssid, info->bssid);

	if (changed & BSS_CHANGED_BEACON_ENABLED)
		ath10k_control_beaconing(arvif, info);

	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
		arvif->use_cts_prot = info->use_cts_prot;
		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n",
			   arvif->vdev_id, info->use_cts_prot);

		ret = ath10k_recalc_rtscts_prot(arvif);
		if (ret)
			ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
				    arvif->vdev_id, ret);

		vdev_param = ar->wmi.vdev_param->protection_mode;
		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
						info->use_cts_prot ? 1 : 0);
		if (ret)
			ath10k_warn(ar, "failed to set protection mode %d on vdev %i: %d\n",
				    info->use_cts_prot, arvif->vdev_id, ret);
	}

	if (changed & BSS_CHANGED_ERP_SLOT) {
		if (info->use_short_slot)
			slottime = WMI_VDEV_SLOT_TIME_SHORT; /* 9us */

		else
			slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */

		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n",
			   arvif->vdev_id, slottime);

		vdev_param = ar->wmi.vdev_param->slot_time;
		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
						slottime);
		if (ret)
			ath10k_warn(ar, "failed to set erp slot for vdev %d: %i\n",
				    arvif->vdev_id, ret);
	}

	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
		if (info->use_short_preamble)
			preamble = WMI_VDEV_PREAMBLE_SHORT;
		else
			preamble = WMI_VDEV_PREAMBLE_LONG;

		ath10k_dbg(ar, ATH10K_DBG_MAC,
			   "mac vdev %d preamble %dn",
			   arvif->vdev_id, preamble);

		vdev_param = ar->wmi.vdev_param->preamble;
		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
						preamble);
		if (ret)
			ath10k_warn(ar, "failed to set preamble for vdev %d: %i\n",
				    arvif->vdev_id, ret);
	}

	if (changed & BSS_CHANGED_ASSOC) {
		if (info->assoc) {
			/* Workaround: Make sure monitor vdev is not running
			 * when associating to prevent some firmware revisions
			 * (e.g. 10.1 and 10.2) from crashing.
			 */
			if (ar->monitor_started)
				ath10k_monitor_stop(ar);
			ath10k_bss_assoc(hw, vif, info);
			ath10k_monitor_recalc(ar);
		} else {
			ath10k_bss_disassoc(hw, vif);
		}
	}

	if (changed & BSS_CHANGED_TXPOWER) {
		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev_id %i txpower %d\n",
			   arvif->vdev_id, info->txpower);

		arvif->txpower = info->txpower;
		ret = ath10k_mac_txpower_recalc(ar);
		if (ret)
			ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
	}

	if (changed & BSS_CHANGED_PS) {
		arvif->ps = vif->bss_conf.ps;

		ret = ath10k_config_ps(ar);
		if (ret)
			ath10k_warn(ar, "failed to setup ps on vdev %i: %d\n",
				    arvif->vdev_id, ret);
	}

	mutex_unlock(&ar->conf_mutex);
}

static u32 ath10k_calc_ct_scan_flags(struct ath10k *ar,
				     struct ieee80211_vif *vif)
{
	u32 rv = 0;

	if (test_bit(ATH10K_FW_FEATURE_WMI_10X_CT,
		     ar->running_fw->fw_file.fw_features)) {
		if (ar->running_fw->fw_file.wmi_op_version == ATH10K_FW_WMI_OP_VERSION_10_4) {
			if (!ath10k_mac_vif_has_any_ht(ar, vif))
				rv |= WMI_SCAN_DISABLE_HT_4;

			if (!ath10k_mac_vif_has_any_vht(ar, vif))
				rv |= WMI_SCAN_DISABLE_VHT_4;
		} else {
			if (!ath10k_mac_vif_has_any_ht(ar, vif))
				rv |= WMI_SCAN_DISABLE_HT;

			if (!ath10k_mac_vif_has_any_vht(ar, vif))
				rv |= WMI_SCAN_DISABLE_VHT;
		}
	}
	return rv;
}

static int ath10k_hw_scan(struct ieee80211_hw *hw,
			  struct ieee80211_vif *vif,
			  struct ieee80211_scan_request *hw_req)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct cfg80211_scan_request *req = &hw_req->req;
	struct wmi_start_scan_arg arg;
	int ret = 0;
	int i;
	bool skip_legacy_rates = false;

	mutex_lock(&ar->conf_mutex);

	spin_lock_bh(&ar->data_lock);
	switch (ar->scan.state) {
	case ATH10K_SCAN_IDLE:
		reinit_completion(&ar->scan.started);
		reinit_completion(&ar->scan.completed);
		ar->scan.state = ATH10K_SCAN_STARTING;
		ar->scan.is_roc = false;
		ar->scan.vdev_id = arvif->vdev_id;
		ret = 0;
		break;
	case ATH10K_SCAN_STARTING:
	case ATH10K_SCAN_RUNNING:
	case ATH10K_SCAN_ABORTING:
		ret = -EBUSY;
		break;
	}
	spin_unlock_bh(&ar->data_lock);

	if (ret)
		goto exit;

	memset(&arg, 0, sizeof(arg));
	ath10k_wmi_start_scan_init(ar, &arg);
	arg.vdev_id = arvif->vdev_id;
	arg.scan_id = ATH10K_SCAN_ID;

	arg.scan_ctrl_flags |= ath10k_calc_ct_scan_flags(ar, vif);

	if (test_bit(ATH10K_FW_FEATURE_CT_RATEMASK,
		     ar->running_fw->fw_file.fw_features)) {
		/* Firmware with this feature fixes a bug in firmware
		 * that would not allow one to disable CCK and OFDM rates.
		 * Host stack sets up the IEs, so tell firmware to leave it
		 * alone.
		 */
		skip_legacy_rates = true;
	}

	if (!skip_legacy_rates) {
		if (!req->no_cck)
			arg.scan_ctrl_flags |= WMI_SCAN_ADD_CCK_RATES;
		arg.scan_ctrl_flags |= WMI_SCAN_ADD_OFDM_RATES;
	}

	if (req->ie_len) {
		arg.ie_len = req->ie_len;
		memcpy(arg.ie, req->ie, arg.ie_len);
	}

	if (req->n_ssids) {
		arg.n_ssids = req->n_ssids;
		for (i = 0; i < arg.n_ssids; i++) {
			arg.ssids[i].len  = req->ssids[i].ssid_len;
			arg.ssids[i].ssid = req->ssids[i].ssid;
		}
	} else {
		arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
	}

	if (req->n_channels) {
		arg.n_channels = req->n_channels;
		for (i = 0; i < arg.n_channels; i++)
			arg.channels[i] = req->channels[i]->center_freq;
	}

	ret = ath10k_start_scan(ar, &arg);
	if (ret) {
		ath10k_warn(ar, "failed to start hw scan: %d\n", ret);
		spin_lock_bh(&ar->data_lock);
		ar->scan.state = ATH10K_SCAN_IDLE;
		spin_unlock_bh(&ar->data_lock);
	}

	/* Add a 200ms margin to account for event/command processing */
	ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout,
				     msecs_to_jiffies(arg.max_scan_time +
						      200));

exit:
	mutex_unlock(&ar->conf_mutex);
	return ret;
}

static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw,
				  struct ieee80211_vif *vif)
{
	struct ath10k *ar = hw->priv;

	mutex_lock(&ar->conf_mutex);
	ath10k_scan_abort(ar);
	mutex_unlock(&ar->conf_mutex);

	cancel_delayed_work_sync(&ar->scan.timeout);
}

static void ath10k_set_key_h_def_keyidx(struct ath10k *ar,
					struct ath10k_vif *arvif,
					enum set_key_cmd cmd,
					struct ieee80211_key_conf *key)
{
	u32 vdev_param = arvif->ar->wmi.vdev_param->def_keyid;
	int ret;

	/* 10.1 firmware branch requires default key index to be set to group
	 * key index after installing it. Otherwise FW/HW Txes corrupted
	 * frames with multi-vif APs. This is not required for main firmware
	 * branch (e.g. 636).
	 *
	 * This is also needed for 636 fw for IBSS-RSN to work more reliably.
	 *
	 * FIXME: It remains unknown if this is required for multi-vif STA
	 * interfaces on 10.1.
	 */

	if (arvif->vdev_type != WMI_VDEV_TYPE_AP &&
	    arvif->vdev_type != WMI_VDEV_TYPE_IBSS)
		return;

	if (key->cipher == WLAN_CIPHER_SUITE_WEP40)
		return;

	if (key->cipher == WLAN_CIPHER_SUITE_WEP104)
		return;

	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
		return;

	if (cmd != SET_KEY)
		return;

	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
					key->keyidx);
	if (ret)
		ath10k_warn(ar, "failed to set vdev %i group key as default key: %d\n",
			    arvif->vdev_id, ret);
}

static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
			  struct ieee80211_vif *vif, struct ieee80211_sta *sta,
			  struct ieee80211_key_conf *key)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct ath10k_peer *peer;
	const u8 *peer_addr;
	bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
		      key->cipher == WLAN_CIPHER_SUITE_WEP104;
	int ret = 0;
	int ret2;
	u32 flags = 0;
	u32 flags2;

	/* this one needs to be done in software */
	if (key->cipher == WLAN_CIPHER_SUITE_AES_CMAC)
		return 1;

	if (arvif->nohwcrypt)
		return 1;

	if (key->keyidx > WMI_MAX_KEY_INDEX) {
		if (cmd != DISABLE_KEY)
			ath10k_warn(ar, "failed to install key, idx out of range: %d > %d, vdev: %d\n",
				    key->keyidx, WMI_MAX_KEY_INDEX, arvif->vdev_id);
		return -ENOSPC;
	}

	mutex_lock(&ar->conf_mutex);

	if (sta)
		peer_addr = sta->addr;
	else if (arvif->vdev_type == WMI_VDEV_TYPE_STA)
		peer_addr = vif->bss_conf.bssid;
	else
		peer_addr = vif->addr;

	key->hw_key_idx = key->keyidx;

	if (is_wep) {
		if (cmd == SET_KEY)
			arvif->wep_keys[key->keyidx] = key;
		else
			arvif->wep_keys[key->keyidx] = NULL;
	}

	/* the peer should not disappear in mid-way (unless FW goes awry) since
	 * we already hold conf_mutex. we just make sure its there now. */
	spin_lock_bh(&ar->data_lock);
	peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
	spin_unlock_bh(&ar->data_lock);

	if (!peer) {
		if (cmd == SET_KEY) {
			ath10k_warn(ar, "failed to install key for non-existent peer %pM\n",
				    peer_addr);
			ret = -EOPNOTSUPP;
			goto exit;
		} else {
			/* if the peer doesn't exist there is no key to disable
			 * anymore */
			goto exit;
		}
	}

	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
		flags |= WMI_KEY_PAIRWISE;
	else
		flags |= WMI_KEY_GROUP;

	if (is_wep) {
		if (cmd == DISABLE_KEY)
			ath10k_clear_vdev_key(arvif, key);

		/* When WEP keys are uploaded it's possible that there are
		 * stations associated already (e.g. when merging) without any
		 * keys. Static WEP needs an explicit per-peer key upload.
		 */
		if (vif->type == NL80211_IFTYPE_ADHOC &&
		    cmd == SET_KEY)
			ath10k_mac_vif_update_wep_key(arvif, key);

		/* 802.1x never sets the def_wep_key_idx so each set_key()
		 * call changes default tx key.
		 *
		 * Static WEP sets def_wep_key_idx via .set_default_unicast_key
		 * after first set_key().
		 */
		if (cmd == SET_KEY && arvif->def_wep_key_idx == -1)
			flags |= WMI_KEY_TX_USAGE;
	}

	ret = ath10k_install_key(arvif, key, cmd, peer_addr, flags);
	if (ret) {
		WARN_ON(ret > 0);
		ath10k_warn(ar, "failed to install key for vdev %i peer %pM: %d\n",
			    arvif->vdev_id, peer_addr, ret);
		goto exit;
	}

	/* mac80211 sets static WEP keys as groupwise while firmware requires
	 * them to be installed twice as both pairwise and groupwise.
	 */
	if (is_wep && !sta && vif->type == NL80211_IFTYPE_STATION) {
		flags2 = flags;
		flags2 &= ~WMI_KEY_GROUP;
		flags2 |= WMI_KEY_PAIRWISE;

		ret = ath10k_install_key(arvif, key, cmd, peer_addr, flags2);
		if (ret) {
			WARN_ON(ret > 0);
			ath10k_warn(ar, "failed to install (ucast) key for vdev %i peer %pM: %d\n",
				    arvif->vdev_id, peer_addr, ret);
			ret2 = ath10k_install_key(arvif, key, DISABLE_KEY,
						  peer_addr, flags);
			if (ret2) {
				WARN_ON(ret2 > 0);
				ath10k_warn(ar, "failed to disable (mcast) key for vdev %i peer %pM: %d\n",
					    arvif->vdev_id, peer_addr, ret2);
			}
			goto exit;
		}
	}

	ath10k_set_key_h_def_keyidx(ar, arvif, cmd, key);

	spin_lock_bh(&ar->data_lock);
	peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
	if (peer && cmd == SET_KEY)
		peer->keys[key->keyidx] = key;
	else if (peer && cmd == DISABLE_KEY)
		peer->keys[key->keyidx] = NULL;
	else if (peer == NULL)
		/* impossible unless FW goes crazy */
		ath10k_warn(ar, "Peer %pM disappeared!\n", peer_addr);
	spin_unlock_bh(&ar->data_lock);

exit:
	mutex_unlock(&ar->conf_mutex);
	return ret;
}

static void ath10k_set_default_unicast_key(struct ieee80211_hw *hw,
					   struct ieee80211_vif *vif,
					   int keyidx)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	int ret;

	mutex_lock(&arvif->ar->conf_mutex);

	if (arvif->ar->state != ATH10K_STATE_ON)
		goto unlock;

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d set keyidx %d\n",
		   arvif->vdev_id, keyidx);

	ret = ath10k_wmi_vdev_set_param(arvif->ar,
					arvif->vdev_id,
					arvif->ar->wmi.vdev_param->def_keyid,
					keyidx);

	if (ret) {
		ath10k_warn(ar, "failed to update wep key index for vdev %d: %d\n",
			    arvif->vdev_id,
			    ret);
		goto unlock;
	}

	arvif->def_wep_key_idx = keyidx;

unlock:
	mutex_unlock(&arvif->ar->conf_mutex);
}

static void ath10k_sta_rc_update_wk(struct work_struct *wk)
{
	struct ath10k *ar;
	struct ath10k_vif *arvif;
	struct ath10k_sta *arsta;
	struct ieee80211_sta *sta;
	struct cfg80211_chan_def def;
	enum nl80211_band band;
	const u8 *ht_mcs_mask;
	const u16 *vht_mcs_mask;
	u32 changed, bw, nss, smps;
	int err;

	arsta = container_of(wk, struct ath10k_sta, update_wk);
	sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv);
	arvif = arsta->arvif;
	ar = arvif->ar;

	if (WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def)))
		return;

	band = def.chan->band;
	ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs;
	vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs;

	spin_lock_bh(&ar->data_lock);

	changed = arsta->changed;
	arsta->changed = 0;

	bw = arsta->bw;
	nss = arsta->nss;
	smps = arsta->smps;

	spin_unlock_bh(&ar->data_lock);

	mutex_lock(&ar->conf_mutex);

	nss = max_t(u32, 1, nss);
	nss = min(nss, max(ath10k_mac_max_ht_nss(ht_mcs_mask),
			   ath10k_mac_max_vht_nss(vht_mcs_mask)));

	if (changed & IEEE80211_RC_BW_CHANGED) {
		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d\n",
			   sta->addr, bw);

		err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
						WMI_PEER_CHAN_WIDTH, bw);
		if (err)
			ath10k_warn(ar, "failed to update STA %pM peer bw %d: %d\n",
				    sta->addr, bw, err);
	}

	if (changed & IEEE80211_RC_NSS_CHANGED) {
		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM nss %d\n",
			   sta->addr, nss);

		err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
						WMI_PEER_NSS, nss);
		if (err)
			ath10k_warn(ar, "failed to update STA %pM nss %d: %d\n",
				    sta->addr, nss, err);
	}

	if (changed & IEEE80211_RC_SMPS_CHANGED) {
		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM smps %d\n",
			   sta->addr, smps);

		err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
						WMI_PEER_SMPS_STATE, smps);
		if (err)
			ath10k_warn(ar, "failed to update STA %pM smps %d: %d\n",
				    sta->addr, smps, err);
	}

	if (changed & IEEE80211_RC_SUPP_RATES_CHANGED ||
	    changed & IEEE80211_RC_SMPS_CHANGED ||
	    changed & IEEE80211_RC_NSS_CHANGED) {
		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates/nss bandwidth: %d\n",
			   sta->addr, sta->bandwidth);

		err = ath10k_station_assoc(ar, arvif->vif, sta, true);
		if (err)
			ath10k_warn(ar, "failed to reassociate station: %pM\n",
				    sta->addr);
	}

	mutex_unlock(&ar->conf_mutex);
}

static int ath10k_mac_inc_num_stations(struct ath10k_vif *arvif,
				       struct ieee80211_sta *sta)
{
	struct ath10k *ar = arvif->ar;

	lockdep_assert_held(&ar->conf_mutex);

	if (arvif->vdev_type == WMI_VDEV_TYPE_STA && !sta->tdls)
		return 0;

	if (ar->num_stations >= ar->max_num_stations)
		return -ENOBUFS;

	ar->num_stations++;

	return 0;
}

static void ath10k_mac_dec_num_stations(struct ath10k_vif *arvif,
					struct ieee80211_sta *sta)
{
	struct ath10k *ar = arvif->ar;

	lockdep_assert_held(&ar->conf_mutex);

	if (arvif->vdev_type == WMI_VDEV_TYPE_STA && !sta->tdls)
		return;

	ar->num_stations--;
}

struct ath10k_mac_tdls_iter_data {
	u32 num_tdls_stations;
	struct ieee80211_vif *curr_vif;
};

static void ath10k_mac_tdls_vif_stations_count_iter(void *data,
						    struct ieee80211_sta *sta)
{
	struct ath10k_mac_tdls_iter_data *iter_data = data;
	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
	struct ieee80211_vif *sta_vif = arsta->arvif->vif;

	if (sta->tdls && sta_vif == iter_data->curr_vif)
		iter_data->num_tdls_stations++;
}

static int ath10k_mac_tdls_vif_stations_count(struct ieee80211_hw *hw,
					      struct ieee80211_vif *vif)
{
	struct ath10k_mac_tdls_iter_data data = {};

	data.curr_vif = vif;

	ieee80211_iterate_stations_atomic(hw,
					  ath10k_mac_tdls_vif_stations_count_iter,
					  &data);
	return data.num_tdls_stations;
}

static void ath10k_mac_tdls_vifs_count_iter(void *data, u8 *mac,
					    struct ieee80211_vif *vif)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	int *num_tdls_vifs = data;

	if (vif->type != NL80211_IFTYPE_STATION)
		return;

	if (ath10k_mac_tdls_vif_stations_count(arvif->ar->hw, vif) > 0)
		(*num_tdls_vifs)++;
}

static int ath10k_mac_tdls_vifs_count(struct ieee80211_hw *hw)
{
	int num_tdls_vifs = 0;

	ieee80211_iterate_active_interfaces_atomic(hw,
						   IEEE80211_IFACE_ITER_NORMAL,
						   ath10k_mac_tdls_vifs_count_iter,
						   &num_tdls_vifs);
	return num_tdls_vifs;
}

static int ath10k_sta_state(struct ieee80211_hw *hw,
			    struct ieee80211_vif *vif,
			    struct ieee80211_sta *sta,
			    enum ieee80211_sta_state old_state,
			    enum ieee80211_sta_state new_state)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
	struct ath10k_peer *peer;
	int ret = 0;
	int i;

	if (old_state == IEEE80211_STA_NOTEXIST &&
	    new_state == IEEE80211_STA_NONE) {
		memset(arsta, 0, sizeof(*arsta));
		arsta->arvif = arvif;
		INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk);

		for (i = 0; i < ARRAY_SIZE(sta->txq); i++)
			ath10k_mac_txq_init(ar, sta->txq[i]);
	}

	/* cancel must be done outside the mutex to avoid deadlock */
	if ((old_state == IEEE80211_STA_NONE &&
	     new_state == IEEE80211_STA_NOTEXIST))
		cancel_work_sync(&arsta->update_wk);

	mutex_lock(&ar->conf_mutex);

	if (old_state == IEEE80211_STA_NOTEXIST &&
	    new_state == IEEE80211_STA_NONE) {
		/*
		 * New station addition.
		 */
		enum wmi_peer_type peer_type = WMI_PEER_TYPE_DEFAULT;
		u32 num_tdls_stations;
		u32 num_tdls_vifs;

		ath10k_dbg(ar, ATH10K_DBG_MAC,
			   "mac vdev %d peer create %pM (new sta) sta %d / %d peer %d / %d\n",
			   arvif->vdev_id, sta->addr,
			   ar->num_stations + 1, ar->max_num_stations,
			   ar->num_peers + 1, ar->max_num_peers);

		ret = ath10k_mac_inc_num_stations(arvif, sta);
		if (ret) {
			ath10k_warn(ar, "refusing to associate station: too many connected already (%d)\n",
				    ar->max_num_stations);
			goto exit;
		}

		if (sta->tdls)
			peer_type = WMI_PEER_TYPE_TDLS;

		ret = ath10k_peer_create(ar, vif, sta, arvif->vdev_id,
					 sta->addr, peer_type);
		if (ret) {
			ath10k_warn(ar, "failed to add peer %pM for vdev %d when adding a new sta: %i\n",
				    sta->addr, arvif->vdev_id, ret);
			ath10k_mac_dec_num_stations(arvif, sta);
			goto exit;
		}

		spin_lock_bh(&ar->data_lock);

		peer = ath10k_peer_find(ar, arvif->vdev_id, sta->addr);
		if (!peer) {
			ath10k_warn(ar, "failed to lookup peer %pM on vdev %i\n",
				    vif->addr, arvif->vdev_id);
			spin_unlock_bh(&ar->data_lock);
			ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
			ath10k_mac_dec_num_stations(arvif, sta);
			ret = -ENOENT;
			goto exit;
		}

		arsta->peer_id = find_first_bit(peer->peer_ids,
						ATH10K_MAX_NUM_PEER_IDS);

		spin_unlock_bh(&ar->data_lock);

		if (!sta->tdls)
			goto exit;

		num_tdls_stations = ath10k_mac_tdls_vif_stations_count(hw, vif);
		num_tdls_vifs = ath10k_mac_tdls_vifs_count(hw);

		if (num_tdls_vifs >= ar->max_num_tdls_vdevs &&
		    num_tdls_stations == 0) {
			ath10k_warn(ar, "vdev %i exceeded maximum number of tdls vdevs %i\n",
				    arvif->vdev_id, ar->max_num_tdls_vdevs);
			ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
			ath10k_mac_dec_num_stations(arvif, sta);
			ret = -ENOBUFS;
			goto exit;
		}

		if (num_tdls_stations == 0) {
			/* This is the first tdls peer in current vif */
			enum wmi_tdls_state state = WMI_TDLS_ENABLE_ACTIVE;

			ret = ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id,
							      state);
			if (ret) {
				ath10k_warn(ar, "failed to update fw tdls state on vdev %i: %i\n",
					    arvif->vdev_id, ret);
				ath10k_peer_delete(ar, arvif->vdev_id,
						   sta->addr);
				ath10k_mac_dec_num_stations(arvif, sta);
				goto exit;
			}
		}

		ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, sta,
						  WMI_TDLS_PEER_STATE_PEERING);
		if (ret) {
			ath10k_warn(ar,
				    "failed to update tdls peer %pM for vdev %d when adding a new sta: %i\n",
				    sta->addr, arvif->vdev_id, ret);
			ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
			ath10k_mac_dec_num_stations(arvif, sta);

			if (num_tdls_stations != 0)
				goto exit;
			ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id,
							WMI_TDLS_DISABLE);
		}
	} else if ((old_state == IEEE80211_STA_NONE &&
		    new_state == IEEE80211_STA_NOTEXIST)) {
		/*
		 * Existing station deletion.
		 */
		ath10k_dbg(ar, ATH10K_DBG_MAC,
			   "mac vdev %d peer delete %pM (sta gone) sta: %p\n",
			   arvif->vdev_id, sta->addr, sta);

		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
		if (ret)
			ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
				    sta->addr, arvif->vdev_id, ret);

		ath10k_mac_dec_num_stations(arvif, sta);

		spin_lock_bh(&ar->data_lock);
		for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++) {
			peer = ar->peer_map[i];
			if (!peer)
				continue;

			if (peer->sta == sta) {
				ath10k_warn(ar, "found sta peer %pM (ptr %p id %d) entry on vdev %i after it was supposedly removed\n",
					    sta->addr, peer, i, arvif->vdev_id);
				peer->sta = NULL;

				/* Clean up the peer object as well since we
				 * must have failed to do this above.
				 */
				list_del(&peer->list);
				ar->peer_map[i] = NULL;
				kfree(peer);
				ar->num_peers--;
			}
		}
		spin_unlock_bh(&ar->data_lock);

		for (i = 0; i < ARRAY_SIZE(sta->txq); i++)
			ath10k_mac_txq_unref(ar, sta->txq[i]);

		if (!sta->tdls)
			goto exit;

		if (ath10k_mac_tdls_vif_stations_count(hw, vif))
			goto exit;

		/* This was the last tdls peer in current vif */
		ret = ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id,
						      WMI_TDLS_DISABLE);
		if (ret) {
			ath10k_warn(ar, "failed to update fw tdls state on vdev %i: %i\n",
				    arvif->vdev_id, ret);
		}
	} else if (old_state == IEEE80211_STA_AUTH &&
		   new_state == IEEE80211_STA_ASSOC &&
		   (vif->type == NL80211_IFTYPE_AP ||
		    vif->type == NL80211_IFTYPE_MESH_POINT ||
		    vif->type == NL80211_IFTYPE_ADHOC)) {
		/*
		 * New association.
		 */
		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM associated, bandwidth: %d\n",
			   sta->addr, sta->bandwidth);

		ret = ath10k_station_assoc(ar, vif, sta, false);
		if (ret)
			ath10k_warn(ar, "failed to associate station %pM for vdev %i: %i\n",
				    sta->addr, arvif->vdev_id, ret);
	} else if (old_state == IEEE80211_STA_ASSOC &&
		   new_state == IEEE80211_STA_AUTHORIZED &&
		   sta->tdls) {
		/*
		 * Tdls station authorized.
		 */
		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac tdls sta %pM authorized, bandwidth: %d\n",
			   sta->addr, sta->bandwidth);

		ret = ath10k_station_assoc(ar, vif, sta, false);
		if (ret) {
			ath10k_warn(ar, "failed to associate tdls station %pM for vdev %i: %i\n",
				    sta->addr, arvif->vdev_id, ret);
			goto exit;
		}

		ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, sta,
						  WMI_TDLS_PEER_STATE_CONNECTED);
		if (ret)
			ath10k_warn(ar, "failed to update tdls peer %pM for vdev %i: %i\n",
				    sta->addr, arvif->vdev_id, ret);
	} else if (old_state == IEEE80211_STA_ASSOC &&
		    new_state == IEEE80211_STA_AUTH &&
		    (vif->type == NL80211_IFTYPE_AP ||
		     vif->type == NL80211_IFTYPE_MESH_POINT ||
		     vif->type == NL80211_IFTYPE_ADHOC)) {
		/*
		 * Disassociation.
		 */
		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM disassociated\n",
			   sta->addr);

		ret = ath10k_station_disassoc(ar, vif, sta);
		if (ret)
			ath10k_warn(ar, "failed to disassociate station: %pM vdev %i: %i\n",
				    sta->addr, arvif->vdev_id, ret);
	}
exit:
	mutex_unlock(&ar->conf_mutex);
	return ret;
}

static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
				u16 ac, bool enable)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct wmi_sta_uapsd_auto_trig_arg arg = {};
	u32 prio = 0, acc = 0;
	u32 value = 0;
	int ret = 0;

	lockdep_assert_held(&ar->conf_mutex);

	if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
		return 0;

	switch (ac) {
	case IEEE80211_AC_VO:
		value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN |
			WMI_STA_PS_UAPSD_AC3_TRIGGER_EN;
		prio = 7;
		acc = 3;
		break;
	case IEEE80211_AC_VI:
		value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN |
			WMI_STA_PS_UAPSD_AC2_TRIGGER_EN;
		prio = 5;
		acc = 2;
		break;
	case IEEE80211_AC_BE:
		value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN |
			WMI_STA_PS_UAPSD_AC1_TRIGGER_EN;
		prio = 2;
		acc = 1;
		break;
	case IEEE80211_AC_BK:
		value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN |
			WMI_STA_PS_UAPSD_AC0_TRIGGER_EN;
		prio = 0;
		acc = 0;
		break;
	}

	if (enable)
		arvif->u.sta.uapsd |= value;
	else
		arvif->u.sta.uapsd &= ~value;

	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
					  WMI_STA_PS_PARAM_UAPSD,
					  arvif->u.sta.uapsd);
	if (ret) {
		ath10k_warn(ar, "failed to set uapsd params: %d\n", ret);
		goto exit;
	}

	if (arvif->u.sta.uapsd)
		value = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD;
	else
		value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;

	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
					  WMI_STA_PS_PARAM_RX_WAKE_POLICY,
					  value);
	if (ret)
		ath10k_warn(ar, "failed to set rx wake param: %d\n", ret);

	ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
	if (ret) {
		ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
	if (ret) {
		ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
			    arvif->vdev_id, ret);
		return ret;
	}

	if (test_bit(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, ar->wmi.svc_map) ||
	    test_bit(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, ar->wmi.svc_map)) {
		/* Only userspace can make an educated decision when to send
		 * trigger frame. The following effectively disables u-UAPSD
		 * autotrigger in firmware (which is enabled by default
		 * provided the autotrigger service is available).
		 */

		arg.wmm_ac = acc;
		arg.user_priority = prio;
		arg.service_interval = 0;
		arg.suspend_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC;
		arg.delay_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC;

		ret = ath10k_wmi_vdev_sta_uapsd(ar, arvif->vdev_id,
						arvif->bssid, &arg, 1);
		if (ret) {
			ath10k_warn(ar, "failed to set uapsd auto trigger %d\n",
				    ret);
			return ret;
		}
	}

exit:
	return ret;
}

static int ath10k_conf_tx(struct ieee80211_hw *hw,
			  struct ieee80211_vif *vif, u16 ac,
			  const struct ieee80211_tx_queue_params *params)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct wmi_wmm_params_arg *p = NULL;
	int ret;

	mutex_lock(&ar->conf_mutex);

	switch (ac) {
	case IEEE80211_AC_VO:
		p = &arvif->wmm_params.ac_vo;
		break;
	case IEEE80211_AC_VI:
		p = &arvif->wmm_params.ac_vi;
		break;
	case IEEE80211_AC_BE:
		p = &arvif->wmm_params.ac_be;
		break;
	case IEEE80211_AC_BK:
		p = &arvif->wmm_params.ac_bk;
		break;
	}

	if (WARN_ON(!p)) {
		ret = -EINVAL;
		goto exit;
	}

	p->cwmin = params->cw_min;
	p->cwmax = params->cw_max;
	p->aifs = params->aifs;

	/*
	 * The channel time duration programmed in the HW is in absolute
	 * microseconds, while mac80211 gives the txop in units of
	 * 32 microseconds.
	 */
	p->txop = params->txop * 32;

	if (ar->wmi.ops->gen_vdev_wmm_conf) {
		ret = ath10k_wmi_vdev_wmm_conf(ar, arvif->vdev_id,
					       &arvif->wmm_params);
		if (ret) {
			ath10k_warn(ar, "failed to set vdev wmm params on vdev %i: %d\n",
				    arvif->vdev_id, ret);
			goto exit;
		}
	} else {
		/* This won't work well with multi-interface cases but it's
		 * better than nothing.
		 */
		ret = ath10k_wmi_pdev_set_wmm_params(ar, &arvif->wmm_params);
		if (ret) {
			ath10k_warn(ar, "failed to set wmm params: %d\n", ret);
			goto exit;
		}
	}

	ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd);
	if (ret)
		ath10k_warn(ar, "failed to set sta uapsd: %d\n", ret);

exit:
	mutex_unlock(&ar->conf_mutex);
	return ret;
}

#define ATH10K_ROC_TIMEOUT_HZ (2 * HZ)

static int ath10k_remain_on_channel(struct ieee80211_hw *hw,
				    struct ieee80211_vif *vif,
				    struct ieee80211_channel *chan,
				    int duration,
				    enum ieee80211_roc_type type)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct wmi_start_scan_arg arg;
	int ret = 0;
	u32 scan_time_msec;

	mutex_lock(&ar->conf_mutex);

	spin_lock_bh(&ar->data_lock);
	switch (ar->scan.state) {
	case ATH10K_SCAN_IDLE:
		reinit_completion(&ar->scan.started);
		reinit_completion(&ar->scan.completed);
		reinit_completion(&ar->scan.on_channel);
		ar->scan.state = ATH10K_SCAN_STARTING;
		ar->scan.is_roc = true;
		ar->scan.vdev_id = arvif->vdev_id;
		ar->scan.roc_freq = chan->center_freq;
		ar->scan.roc_notify = true;
		ret = 0;
		break;
	case ATH10K_SCAN_STARTING:
	case ATH10K_SCAN_RUNNING:
	case ATH10K_SCAN_ABORTING:
		ret = -EBUSY;
		break;
	}
	spin_unlock_bh(&ar->data_lock);

	if (ret)
		goto exit;

	scan_time_msec = ar->hw->wiphy->max_remain_on_channel_duration * 2;

	memset(&arg, 0, sizeof(arg));
	ath10k_wmi_start_scan_init(ar, &arg);
	arg.vdev_id = arvif->vdev_id;
	arg.scan_id = ATH10K_SCAN_ID;
	arg.n_channels = 1;
	arg.channels[0] = chan->center_freq;
	arg.dwell_time_active = scan_time_msec;
	arg.dwell_time_passive = scan_time_msec;
	arg.max_scan_time = scan_time_msec;
	arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
	arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ;
	arg.burst_duration_ms = duration;

	if (ath10k_mac_vif_has_any_cck(ar, vif, (1 << chan->band)))
		arg.scan_ctrl_flags |= WMI_SCAN_ADD_CCK_RATES;

	if (ath10k_mac_vif_has_any_ofdm(ar, vif, (1 << chan->band)))
		arg.scan_ctrl_flags |= WMI_SCAN_ADD_OFDM_RATES;

	arg.scan_ctrl_flags |= ath10k_calc_ct_scan_flags(ar, vif);

	ret = ath10k_start_scan(ar, &arg);
	if (ret) {
		ath10k_warn(ar, "failed to start roc scan: %d\n", ret);
		spin_lock_bh(&ar->data_lock);
		ar->scan.state = ATH10K_SCAN_IDLE;
		spin_unlock_bh(&ar->data_lock);
		goto exit;
	}

	ret = wait_for_completion_timeout(&ar->scan.on_channel, 3 * HZ);
	if (ret == 0) {
		ath10k_warn(ar, "failed to switch to channel for roc scan\n");

		ret = ath10k_scan_stop(ar);
		if (ret)
			ath10k_warn(ar, "failed to stop scan: %d\n", ret);

		ret = -ETIMEDOUT;
		goto exit;
	}

	ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout,
				     msecs_to_jiffies(duration));

	ret = 0;
exit:
	mutex_unlock(&ar->conf_mutex);
	return ret;
}

static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw)
{
	struct ath10k *ar = hw->priv;

	mutex_lock(&ar->conf_mutex);

	spin_lock_bh(&ar->data_lock);
	ar->scan.roc_notify = false;
	spin_unlock_bh(&ar->data_lock);

	ath10k_scan_abort(ar);

	mutex_unlock(&ar->conf_mutex);

	cancel_delayed_work_sync(&ar->scan.timeout);

	return 0;
}

/*
 * Both RTS and Fragmentation threshold are interface-specific
 * in ath10k, but device-specific in mac80211.
 */

static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif;
	int ret = 0;

	mutex_lock(&ar->conf_mutex);
	list_for_each_entry(arvif, &ar->arvifs, list) {
		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d rts threshold %d\n",
			   arvif->vdev_id, value);

		ret = ath10k_mac_set_rts(arvif, value);
		if (ret) {
			ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n",
				    arvif->vdev_id, ret);
			break;
		}
	}
	mutex_unlock(&ar->conf_mutex);

	return ret;
}

static int ath10k_mac_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
{
	/* Even though there's a WMI enum for fragmentation threshold no known
	 * firmware actually implements it. Moreover it is not possible to rely
	 * frame fragmentation to mac80211 because firmware clears the "more
	 * fragments" bit in frame control making it impossible for remote
	 * devices to reassemble frames.
	 *
	 * Hence implement a dummy callback just to say fragmentation isn't
	 * supported. This effectively prevents mac80211 from doing frame
	 * fragmentation in software.
	 */
	return -EOPNOTSUPP;
}

static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
			 u32 queues, bool drop)
{
	struct ath10k *ar = hw->priv;
	bool skip;
	long time_left;
	u8 peer_addr[ETH_ALEN] = {0};
	struct ath10k_vif *arvif = NULL;
	u32 vid = 0xFFFFFFFF;

	if (vif) {
		arvif = ath10k_vif_to_arvif(vif);
		vid = arvif->vdev_id;
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac flush vdev %d drop %d queues 0x%x\n",
		   arvif ? arvif->vdev_id : -1, drop, queues);

	/* mac80211 doesn't care if we really xmit queued frames or not
	 * we'll collect those frames either way if we stop/delete vdevs */
	if (drop && !test_bit(ATH10K_FW_FEATURE_FLUSH_ALL_CT,
			      ar->running_fw->fw_file.fw_features))
		return;

	mutex_lock(&ar->conf_mutex);

	if (ar->state == ATH10K_STATE_WEDGED)
		goto skip;

	/* NOTE:  As of Aug 10, CT firmware supports flushing a single vdev
	 * by passing the vdev_id, and leaving peer_addr all zeros.  But the logic
	 * below would need to be changed to check if all pkts for a particular
	 * vdev have been flushed instead of the entire tx-q being flushed.
	 *
	 * In addition, this logic could be called even if 'drop' is requested.
	 * This might make the system act more optimally.
	 *
	 * --Ben
	 */

	/* If we are CT firmware, ask it to flush all tids on all peers on
	 * all vdevs.  Normal firmware will just crash if you do this.
	 */
	if (test_bit(ATH10K_FW_FEATURE_FLUSH_ALL_CT,
		     ar->running_fw->fw_file.fw_features)) {
		ath10k_wmi_peer_flush(ar, vid, peer_addr, 0xFFFFFFFF);
		/* I am not sure the wave-2 push-tx logic works right with
		 * flushing, so just bail out after making the proper
		 * request to firmware.  From comment above, I guess this is just
		 * like dropping all frames anyway.
		 */
		if (drop || test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL,
				     ar->running_fw->fw_file.fw_features))
			goto skip;
	}

	time_left = wait_event_timeout(ar->htt.empty_tx_wq, ({
			bool empty;

			spin_lock_bh(&ar->htt.tx_lock);
			empty = (ar->htt.num_pending_tx == 0);
			spin_unlock_bh(&ar->htt.tx_lock);

			skip = (ar->state == ATH10K_STATE_WEDGED) ||
			       test_bit(ATH10K_FLAG_CRASH_FLUSH,
					&ar->dev_flags);

			(empty || skip);
		}), ATH10K_FLUSH_TIMEOUT_HZ);

	if (time_left == 0 || skip)
		ath10k_warn(ar, "failed to flush transmit queue (skip %i ar-state %i): %ld\n",
			    skip, ar->state, time_left);

skip:
	mutex_unlock(&ar->conf_mutex);
}

/* TODO: Implement this function properly
 * For now it is needed to reply to Probe Requests in IBSS mode.
 * Propably we need this information from FW.
 */
static int ath10k_tx_last_beacon(struct ieee80211_hw *hw)
{
	return 1;
}

static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
				     enum ieee80211_reconfig_type reconfig_type)
{
	struct ath10k *ar = hw->priv;

	if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART)
		return;

	mutex_lock(&ar->conf_mutex);

	/* If device failed to restart it will be in a different state, e.g.
	 * ATH10K_STATE_WEDGED */
	if (ar->state == ATH10K_STATE_RESTARTED) {
		ath10k_info(ar, "device successfully recovered\n");
		ar->state = ATH10K_STATE_ON;
		ieee80211_wake_queues(ar->hw);
	}

	mutex_unlock(&ar->conf_mutex);
}

static void
ath10k_mac_update_bss_chan_survey(struct ath10k *ar,
				  struct ieee80211_channel *channel)
{
	int ret;
	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR;

	lockdep_assert_held(&ar->conf_mutex);

	if (!test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map) ||
	    (ar->rx_channel != channel))
		return;

	if (ar->scan.state != ATH10K_SCAN_IDLE) {
		ath10k_dbg(ar, ATH10K_DBG_MAC, "ignoring bss chan info request while scanning..\n");
		return;
	}

	reinit_completion(&ar->bss_survey_done);

	ret = ath10k_wmi_pdev_bss_chan_info_request(ar, type);
	if (ret) {
		ath10k_warn(ar, "failed to send pdev bss chan info request\n");
		return;
	}

	ret = wait_for_completion_timeout(&ar->bss_survey_done, 3 * HZ);
	if (!ret) {
		ath10k_warn(ar, "bss channel survey timed out\n");
		return;
	}
}

static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
			     struct survey_info *survey)
{
	struct ath10k *ar = hw->priv;
	struct ieee80211_supported_band *sband;
	struct survey_info *ar_survey = &ar->survey[idx];
	int ret = 0;

	mutex_lock(&ar->conf_mutex);

	sband = hw->wiphy->bands[NL80211_BAND_2GHZ];
	if (sband && idx >= sband->n_channels) {
		idx -= sband->n_channels;
		sband = NULL;
	}

	if (!sband)
		sband = hw->wiphy->bands[NL80211_BAND_5GHZ];

	if (!sband || idx >= sband->n_channels) {
		ret = -ENOENT;
		goto exit;
	}

	ath10k_mac_update_bss_chan_survey(ar, survey->channel);

	spin_lock_bh(&ar->data_lock);
	memcpy(survey, ar_survey, sizeof(*survey));
	spin_unlock_bh(&ar->data_lock);

	survey->channel = &sband->channels[idx];

	if (ar->rx_channel == survey->channel)
		survey->filled |= SURVEY_INFO_IN_USE;

exit:
	mutex_unlock(&ar->conf_mutex);
	return ret;
}

static bool
ath10k_mac_bitrate_mask_has_single_rate(struct ath10k *ar,
					enum nl80211_band band,
					const struct cfg80211_bitrate_mask *mask)
{
	int num_rates = 0;
	int i;

	num_rates += hweight32(mask->control[band].legacy);

	for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++)
		num_rates += hweight8(mask->control[band].ht_mcs[i]);

	for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++)
		num_rates += hweight16(mask->control[band].vht_mcs[i]);

	return num_rates == 1;
}

static bool
ath10k_mac_bitrate_mask_get_single_nss(struct ath10k *ar,
				       enum nl80211_band band,
				       const struct cfg80211_bitrate_mask *mask,
				       int *nss)
{
	struct ieee80211_supported_band *sband = &ar->mac.sbands[band];
	u16 vht_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
	u8 ht_nss_mask = 0;
	u8 vht_nss_mask = 0;
	int i;

	if (mask->control[band].legacy)
		return false;

	for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) {
		if (mask->control[band].ht_mcs[i] == 0)
			continue;
		else if (mask->control[band].ht_mcs[i] ==
			 sband->ht_cap.mcs.rx_mask[i])
			ht_nss_mask |= BIT(i);
		else
			return false;
	}

	for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) {
		if (mask->control[band].vht_mcs[i] == 0)
			continue;
		else if (mask->control[band].vht_mcs[i] ==
			 ath10k_mac_get_max_vht_mcs_map(vht_mcs_map, i))
			vht_nss_mask |= BIT(i);
		else
			return false;
	}

	if (ht_nss_mask != vht_nss_mask)
		return false;

	if (ht_nss_mask == 0)
		return false;

	if (BIT(fls(ht_nss_mask)) - 1 != ht_nss_mask)
		return false;

	*nss = fls(ht_nss_mask);

	return true;
}

static int
ath10k_mac_bitrate_mask_get_single_rate(struct ath10k *ar,
					enum nl80211_band band,
					const struct cfg80211_bitrate_mask *mask,
					u8 *rate, u8 *nss)
{
	struct ieee80211_supported_band *sband = &ar->mac.sbands[band];
	int rate_idx;
	int i;
	u16 bitrate;
	u8 preamble;
	u8 hw_rate;

	if (hweight32(mask->control[band].legacy) == 1) {
		rate_idx = ffs(mask->control[band].legacy) - 1;

		hw_rate = sband->bitrates[rate_idx].hw_value;
		bitrate = sband->bitrates[rate_idx].bitrate;

		if (ath10k_mac_bitrate_is_cck(bitrate))
			preamble = WMI_RATE_PREAMBLE_CCK;
		else
			preamble = WMI_RATE_PREAMBLE_OFDM;

		*nss = 1;
		*rate = preamble << 6 |
			(*nss - 1) << 4 |
			hw_rate << 0;

		return 0;
	}

	for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) {
		if (hweight8(mask->control[band].ht_mcs[i]) == 1) {
			*nss = i + 1;
			*rate = WMI_RATE_PREAMBLE_HT << 6 |
				(*nss - 1) << 4 |
				(ffs(mask->control[band].ht_mcs[i]) - 1);

			return 0;
		}
	}

	for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) {
		if (hweight16(mask->control[band].vht_mcs[i]) == 1) {
			*nss = i + 1;
			*rate = WMI_RATE_PREAMBLE_VHT << 6 |
				(*nss - 1) << 4 |
				(ffs(mask->control[band].vht_mcs[i]) - 1);

			return 0;
		}
	}

	return -EINVAL;
}

static int ath10k_mac_set_fixed_rate_params(struct ath10k_vif *arvif,
					    u8 rate, u8 nss, u8 sgi, u8 ldpc,
					    enum nl80211_band band)
{
	struct ath10k *ar = arvif->ar;
	u32 vdev_param;
	int ret;

	lockdep_assert_held(&ar->conf_mutex);

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac set fixed rate params vdev %i rate 0x%02hhx nss %hhu sgi %hhu\n",
		   arvif->vdev_id, rate, nss, sgi);

	vdev_param = ar->wmi.vdev_param->fixed_rate;

	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, rate);
	if (ret) {
		ath10k_warn(ar, "vdev %i failed to set fixed rate, param 0x%x rate 0x%02x nss %hhu sgi %hhu: %d\n",
			    arvif->vdev_id, vdev_param, rate, nss, sgi, ret);
		return ret;
	}

	vdev_param = ar->wmi.vdev_param->nss;
	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, nss);
	if (ret) {
		ath10k_warn(ar, "failed to set nss param %d: %d\n", nss, ret);
		return ret;
	}

	vdev_param = ar->wmi.vdev_param->sgi;
	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, sgi);
	if (ret) {
		ath10k_warn(ar, "failed to set sgi param %d: %d\n", sgi, ret);
		return ret;
	}

	vdev_param = ar->wmi.vdev_param->ldpc;
	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, ldpc);
	if (ret) {
		ath10k_warn(ar, "failed to set ldpc param %d: %d\n", ldpc, ret);
		return ret;
	}

	return 0;
}

static bool
ath10k_mac_can_set_bitrate_mask(struct ath10k *ar,
				enum nl80211_band band,
				const struct cfg80211_bitrate_mask *mask)
{
	int i;
	u16 vht_mcs;

	/* CT firmware has improvements that allows this to function
	 * properly.
	 */
	if (test_bit(ATH10K_FW_FEATURE_CT_RATEMASK,
		     ar->running_fw->fw_file.fw_features))
		return true;

	/* Due to firmware limitation in WMI_PEER_ASSOC_CMDID it is impossible
	 * to express all VHT MCS rate masks. Effectively only the following
	 * ranges can be used: none, 0-7, 0-8 and 0-9.
	 */
	for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
		vht_mcs = mask->control[band].vht_mcs[i];

		switch (vht_mcs) {
		case 0:
		case BIT(8) - 1:
		case BIT(9) - 1:
		case BIT(10) - 1:
			break;
		default:
			ath10k_warn(ar, "refusing bitrate mask with missing 0-7 VHT MCS rates\n");
			return false;
		}
	}

	return true;
}

static void ath10k_mac_set_bitrate_mask_iter(void *data,
					     struct ieee80211_sta *sta)
{
	struct ath10k_vif *arvif = data;
	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
	struct ath10k *ar = arvif->ar;

	if (arsta->arvif != arvif)
		return;

	spin_lock_bh(&ar->data_lock);
	arsta->changed |= IEEE80211_RC_SUPP_RATES_CHANGED;
	spin_unlock_bh(&ar->data_lock);

	ieee80211_queue_work(ar->hw, &arsta->update_wk);
}

static void ath10k_dbg_print_bitrate_mask(struct ath10k *ar,
					  const struct cfg80211_bitrate_mask *mask,
					  enum nl80211_band band) {
	ath10k_dbg(ar, ATH10K_DBG_MAC, "mask: band: %i  legacy: 0x%x  gi: %d\n",
		   band, mask->control[band].legacy,
		   mask->control[band].gi);
	BUILD_BUG_ON(IEEE80211_HT_MCS_MASK_LEN != 10);
	ath10k_dbg(ar, ATH10K_DBG_MAC, "ht_mcs: %02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx\n",
		   mask->control[band].ht_mcs[0], mask->control[band].ht_mcs[1],
		   mask->control[band].ht_mcs[2], mask->control[band].ht_mcs[3],
		   mask->control[band].ht_mcs[4], mask->control[band].ht_mcs[5],
		   mask->control[band].ht_mcs[6], mask->control[band].ht_mcs[7],
		   mask->control[band].ht_mcs[8], mask->control[band].ht_mcs[9]);
	BUILD_BUG_ON(NL80211_VHT_NSS_MAX != 8);
	ath10k_dbg(ar, ATH10K_DBG_MAC, "vht_mcs: %04hx %04hx %04hx %04hx %04hx %04hx %04hx %04hx\n",
		   mask->control[band].vht_mcs[0], mask->control[band].vht_mcs[1],
		   mask->control[band].vht_mcs[2], mask->control[band].vht_mcs[3],
		   mask->control[band].vht_mcs[4], mask->control[band].vht_mcs[5],
		   mask->control[band].vht_mcs[6], mask->control[band].vht_mcs[7]);
}

static int ath10k_mac_op_set_bitrate_mask(struct ieee80211_hw *hw,
					  struct ieee80211_vif *vif,
					  const struct cfg80211_bitrate_mask *mask)
{
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct cfg80211_chan_def def;
	struct ath10k *ar = arvif->ar;
	enum nl80211_band band;
	const u8 *ht_mcs_mask;
	const u16 *vht_mcs_mask;
	u8 rate;
	u8 nss;
	u8 sgi;
	u8 ldpc;
	int single_nss;
	int ret;

	if (ath10k_mac_vif_chan(vif, &def)) {
		/* No channel context.  But, we want to be able to set
		 * some rates before we send probe requests, so just
		 * assume 2Ghz if the desired channel is not already known.
		 */
		band = NL80211_BAND_2GHZ;
	}
	else {
		band = def.chan->band;
	}

	ath10k_dbg(ar, ATH10K_DBG_MAC, "set bitrate mask, vid: %d  band: %d\n",
		   arvif->vdev_id, band);
	ath10k_dbg_print_bitrate_mask(ar, mask, 0);
	ath10k_dbg_print_bitrate_mask(ar, mask, 1);

	ht_mcs_mask = mask->control[band].ht_mcs;
	vht_mcs_mask = mask->control[band].vht_mcs;
	ldpc = !!(ar->ht_cap_info & WMI_HT_CAP_LDPC);

	sgi = mask->control[band].gi;
	if (sgi == NL80211_TXRATE_FORCE_LGI)
		return -EINVAL;

	if (ath10k_mac_bitrate_mask_has_single_rate(ar, band, mask)) {
		ret = ath10k_mac_bitrate_mask_get_single_rate(ar, band, mask,
							      &rate, &nss);
		if (ret) {
			ath10k_warn(ar, "failed to get single rate for vdev %i: %d\n",
				    arvif->vdev_id, ret);
			return ret;
		}
		arvif->bitrate_mask = *mask;
	} else if (ath10k_mac_bitrate_mask_get_single_nss(ar, band, mask,
							  &single_nss)) {
		rate = WMI_FIXED_RATE_NONE;
		nss = single_nss;
		arvif->bitrate_mask = *mask;
	} else {
		rate = WMI_FIXED_RATE_NONE;
		nss = min(ar->num_rf_chains,
			  max(ath10k_mac_max_ht_nss(ht_mcs_mask),
			      ath10k_mac_max_vht_nss(vht_mcs_mask)));

		if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask))
			return -EINVAL;

		mutex_lock(&ar->conf_mutex);

		arvif->bitrate_mask = *mask;
		ieee80211_iterate_stations_atomic(ar->hw,
						  ath10k_mac_set_bitrate_mask_iter,
						  arvif);

		mutex_unlock(&ar->conf_mutex);
	}

	mutex_lock(&ar->conf_mutex);

	ret = ath10k_mac_set_fixed_rate_params(arvif, rate, nss, sgi, ldpc, band);
	if (ret) {
		ath10k_warn(ar, "failed to set fixed rate params on vdev %i: %d\n",
			    arvif->vdev_id, ret);
		goto exit;
	}

	/* Setting the usable ratemask may have invalidated previous default
	 * settings for the special rates (bcast, mcast, mgmt), so re-apply
	 * them now.
	 */
	ath10k_check_apply_special_rates(ar, arvif);

exit:
	mutex_unlock(&ar->conf_mutex);

	return ret;
}

static void ath10k_sta_rc_update(struct ieee80211_hw *hw,
				 struct ieee80211_vif *vif,
				 struct ieee80211_sta *sta,
				 u32 changed)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
	u32 bw, smps;

	spin_lock_bh(&ar->data_lock);

	ath10k_dbg(ar, ATH10K_DBG_MAC,
		   "mac sta rc update for %pM changed %08x bw %d nss %d smps %d\n",
		   sta->addr, changed, sta->bandwidth, sta->rx_nss,
		   sta->smps_mode);

	if (changed & IEEE80211_RC_BW_CHANGED) {
		bw = WMI_PEER_CHWIDTH_20MHZ;

		switch (sta->bandwidth) {
		case IEEE80211_STA_RX_BW_20:
			bw = WMI_PEER_CHWIDTH_20MHZ;
			break;
		case IEEE80211_STA_RX_BW_40:
			bw = WMI_PEER_CHWIDTH_40MHZ;
			break;
		case IEEE80211_STA_RX_BW_80:
			bw = WMI_PEER_CHWIDTH_80MHZ;
			break;
		case IEEE80211_STA_RX_BW_160:
			bw = WMI_PEER_CHWIDTH_160MHZ;
			break;
		default:
			ath10k_warn(ar, "Invalid bandwidth %d in rc update for %pM\n",
				    sta->bandwidth, sta->addr);
			bw = WMI_PEER_CHWIDTH_20MHZ;
			break;
		}

		arsta->bw = bw;
	}

	if (changed & IEEE80211_RC_NSS_CHANGED)
		arsta->nss = sta->rx_nss;

	if (changed & IEEE80211_RC_SMPS_CHANGED) {
		smps = WMI_PEER_SMPS_PS_NONE;

		switch (sta->smps_mode) {
		case IEEE80211_SMPS_AUTOMATIC:
		case IEEE80211_SMPS_OFF:
			smps = WMI_PEER_SMPS_PS_NONE;
			break;
		case IEEE80211_SMPS_STATIC:
			smps = WMI_PEER_SMPS_STATIC;
			break;
		case IEEE80211_SMPS_DYNAMIC:
			smps = WMI_PEER_SMPS_DYNAMIC;
			break;
		case IEEE80211_SMPS_NUM_MODES:
			ath10k_warn(ar, "Invalid smps %d in sta rc update for %pM\n",
				    sta->smps_mode, sta->addr);
			smps = WMI_PEER_SMPS_PS_NONE;
			break;
		}

		arsta->smps = smps;
	}

	arsta->changed |= changed;

	spin_unlock_bh(&ar->data_lock);

	ieee80211_queue_work(hw, &arsta->update_wk);
}

static u64 ath10k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
	/*
	 * FIXME: Return 0 for time being. Need to figure out whether FW
	 * has the API to fetch 64-bit local TSF
	 */

	return 0;
}

static void ath10k_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
			   u64 tsf)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	u32 tsf_offset, vdev_param = ar->wmi.vdev_param->set_tsf;
	int ret;

	/* Workaround:
	 *
	 * Given tsf argument is entire TSF value, but firmware accepts
	 * only TSF offset to current TSF.
	 *
	 * get_tsf function is used to get offset value, however since
	 * ath10k_get_tsf is not implemented properly, it will return 0 always.
	 * Luckily all the caller functions to set_tsf, as of now, also rely on
	 * get_tsf function to get entire tsf value such get_tsf() + tsf_delta,
	 * final tsf offset value to firmware will be arithmetically correct.
	 */
	tsf_offset = tsf - ath10k_get_tsf(hw, vif);
	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
					vdev_param, tsf_offset);
	if (ret && ret != -EOPNOTSUPP)
		ath10k_warn(ar, "failed to set tsf offset: %d\n", ret);
}

static int ath10k_ampdu_action(struct ieee80211_hw *hw,
			       struct ieee80211_vif *vif,
			       struct ieee80211_ampdu_params *params)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
	struct ieee80211_sta *sta = params->sta;
	enum ieee80211_ampdu_mlme_action action = params->action;
	u16 tid = params->tid;

	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ampdu vdev_id %i sta %pM tid %hu action %d\n",
		   arvif->vdev_id, sta->addr, tid, action);

	switch (action) {
	case IEEE80211_AMPDU_RX_START:
	case IEEE80211_AMPDU_RX_STOP:
		/* HTT AddBa/DelBa events trigger mac80211 Rx BA session
		 * creation/removal. Do we need to verify this?
		 */
		return 0;
	case IEEE80211_AMPDU_TX_START:
	case IEEE80211_AMPDU_TX_STOP_CONT:
	case IEEE80211_AMPDU_TX_STOP_FLUSH:
	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
	case IEEE80211_AMPDU_TX_OPERATIONAL:
		/* Firmware offloads Tx aggregation entirely so deny mac80211
		 * Tx aggregation requests.
		 */
		return -EOPNOTSUPP;
	}

	return -EINVAL;
}

static void
ath10k_mac_update_rx_channel(struct ath10k *ar,
			     struct ieee80211_chanctx_conf *ctx,
			     struct ieee80211_vif_chanctx_switch *vifs,
			     int n_vifs)
{
	struct cfg80211_chan_def *def = NULL;

	/* Both locks are required because ar->rx_channel is modified. This
	 * allows readers to hold either lock.
	 */
	lockdep_assert_held(&ar->conf_mutex);
	lockdep_assert_held(&ar->data_lock);

	WARN_ON(ctx && vifs);
	WARN_ON(vifs && n_vifs != 1);

	/* FIXME: Sort of an optimization and a workaround. Peers and vifs are
	 * on a linked list now. Doing a lookup peer -> vif -> chanctx for each
	 * ppdu on Rx may reduce performance on low-end systems. It should be
	 * possible to make tables/hashmaps to speed the lookup up (be vary of
	 * cpu data cache lines though regarding sizes) but to keep the initial
	 * implementation simple and less intrusive fallback to the slow lookup
	 * only for multi-channel cases. Single-channel cases will remain to
	 * use the old channel derival and thus performance should not be
	 * affected much.
	 */
	rcu_read_lock();
	if (!ctx && ath10k_mac_num_chanctxs(ar) == 1) {
		ieee80211_iter_chan_contexts_atomic(ar->hw,
						    ath10k_mac_get_any_chandef_iter,
						    &def);

		if (vifs)
			def = &vifs[0].new_ctx->def;

		ar->rx_channel = def->chan;
	} else if ((ctx && ath10k_mac_num_chanctxs(ar) == 0) ||
		   (ctx && (ar->state == ATH10K_STATE_RESTARTED))) {
		/* During driver restart due to firmware assert, since mac80211
		 * already has valid channel context for given radio, channel
		 * context iteration return num_chanctx > 0. So fix rx_channel
		 * when restart is in progress.
		 */
		ar->rx_channel = ctx->def.chan;
	} else {
		ar->rx_channel = NULL;
	}
	rcu_read_unlock();
}

static void
ath10k_mac_update_vif_chan(struct ath10k *ar,
			   struct ieee80211_vif_chanctx_switch *vifs,
			   int n_vifs)
{
	struct ath10k_vif *arvif;
	int ret;
	int i;

	lockdep_assert_held(&ar->conf_mutex);

	/* First stop monitor interface. Some FW versions crash if there's a
	 * lone monitor interface.
	 */
	if (ar->monitor_started)
		ath10k_monitor_stop(ar);

	for (i = 0; i < n_vifs; i++) {
		arvif = ath10k_vif_to_arvif(vifs[i].vif);

		ath10k_dbg(ar, ATH10K_DBG_MAC,
			   "mac chanctx switch vdev_id %i freq %hu->%hu width %d->%d\n",
			   arvif->vdev_id,
			   vifs[i].old_ctx->def.chan->center_freq,
			   vifs[i].new_ctx->def.chan->center_freq,
			   vifs[i].old_ctx->def.width,
			   vifs[i].new_ctx->def.width);

		if (WARN_ON(!arvif->is_started))
			continue;

		if (WARN_ON(!arvif->is_up))
			continue;

		ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
		if (ret) {
			ath10k_warn(ar, "failed to down vdev %d: %d\n",
				    arvif->vdev_id, ret);
			continue;
		}
	}

	/* All relevant vdevs are downed and associated channel resources
	 * should be available for the channel switch now.
	 */

	spin_lock_bh(&ar->data_lock);
	ath10k_mac_update_rx_channel(ar, NULL, vifs, n_vifs);
	spin_unlock_bh(&ar->data_lock);

	for (i = 0; i < n_vifs; i++) {
		arvif = ath10k_vif_to_arvif(vifs[i].vif);

		if (WARN_ON(!arvif->is_started))
			continue;

		if (WARN_ON(!arvif->is_up))
			continue;

		ret = ath10k_mac_setup_bcn_tmpl(arvif);
		if (ret)
			ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n",
				    ret);

		ret = ath10k_mac_setup_prb_tmpl(arvif);
		if (ret)
			ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n",
				    ret);

		ret = ath10k_vdev_restart(arvif, &vifs[i].new_ctx->def);
		if (ret) {
			ath10k_warn(ar, "failed to restart vdev %d: %d\n",
				    arvif->vdev_id, ret);
			continue;
		}

		ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
					 arvif->bssid);
		if (ret) {
			ath10k_warn(ar, "failed to bring vdev up %d: %d\n",
				    arvif->vdev_id, ret);
			continue;
		}
	}

	ath10k_monitor_recalc(ar);
}

static int
ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw,
			  struct ieee80211_chanctx_conf *ctx)
{
	struct ath10k *ar = hw->priv;

	ath10k_dbg(ar, ATH10K_DBG_MAC,
		   "mac chanctx add freq %hu width %d ptr %p\n",
		   ctx->def.chan->center_freq, ctx->def.width, ctx);

	mutex_lock(&ar->conf_mutex);

	spin_lock_bh(&ar->data_lock);
	ath10k_mac_update_rx_channel(ar, ctx, NULL, 0);
	spin_unlock_bh(&ar->data_lock);

	ath10k_recalc_radar_detection(ar);
	ath10k_monitor_recalc(ar);

	mutex_unlock(&ar->conf_mutex);

	return 0;
}

static void
ath10k_mac_op_remove_chanctx(struct ieee80211_hw *hw,
			     struct ieee80211_chanctx_conf *ctx)
{
	struct ath10k *ar = hw->priv;

	ath10k_dbg(ar, ATH10K_DBG_MAC,
		   "mac chanctx remove freq %hu width %d ptr %p\n",
		   ctx->def.chan->center_freq, ctx->def.width, ctx);

	mutex_lock(&ar->conf_mutex);

	spin_lock_bh(&ar->data_lock);
	ath10k_mac_update_rx_channel(ar, NULL, NULL, 0);
	spin_unlock_bh(&ar->data_lock);

	ath10k_recalc_radar_detection(ar);
	ath10k_monitor_recalc(ar);

	mutex_unlock(&ar->conf_mutex);
}

struct ath10k_mac_change_chanctx_arg {
	struct ieee80211_chanctx_conf *ctx;
	struct ieee80211_vif_chanctx_switch *vifs;
	int n_vifs;
	int next_vif;
};

static void
ath10k_mac_change_chanctx_cnt_iter(void *data, u8 *mac,
				   struct ieee80211_vif *vif)
{
	struct ath10k_mac_change_chanctx_arg *arg = data;

	if (rcu_access_pointer(vif->chanctx_conf) != arg->ctx)
		return;

	arg->n_vifs++;
}

static void
ath10k_mac_change_chanctx_fill_iter(void *data, u8 *mac,
				    struct ieee80211_vif *vif)
{
	struct ath10k_mac_change_chanctx_arg *arg = data;
	struct ieee80211_chanctx_conf *ctx;

	ctx = rcu_access_pointer(vif->chanctx_conf);
	if (ctx != arg->ctx)
		return;

	if (WARN_ON(arg->next_vif == arg->n_vifs))
		return;

	arg->vifs[arg->next_vif].vif = vif;
	arg->vifs[arg->next_vif].old_ctx = ctx;
	arg->vifs[arg->next_vif].new_ctx = ctx;
	arg->next_vif++;
}

static void
ath10k_mac_op_change_chanctx(struct ieee80211_hw *hw,
			     struct ieee80211_chanctx_conf *ctx,
			     u32 changed)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_mac_change_chanctx_arg arg = { .ctx = ctx };

	mutex_lock(&ar->conf_mutex);

	ath10k_dbg(ar, ATH10K_DBG_MAC,
		   "mac chanctx change freq %hu width %d ptr %p changed %x\n",
		   ctx->def.chan->center_freq, ctx->def.width, ctx, changed);

	/* This shouldn't really happen because channel switching should use
	 * switch_vif_chanctx().
	 */
	if (WARN_ON(changed & IEEE80211_CHANCTX_CHANGE_CHANNEL))
		goto unlock;

	if (changed & IEEE80211_CHANCTX_CHANGE_WIDTH) {
		ieee80211_iterate_active_interfaces_atomic(
					hw,
					IEEE80211_IFACE_ITER_NORMAL,
					ath10k_mac_change_chanctx_cnt_iter,
					&arg);
		if (arg.n_vifs == 0)
			goto radar;

		arg.vifs = kcalloc(arg.n_vifs, sizeof(arg.vifs[0]),
				   GFP_KERNEL);
		if (!arg.vifs)
			goto radar;

		ieee80211_iterate_active_interfaces_atomic(
					hw,
					IEEE80211_IFACE_ITER_NORMAL,
					ath10k_mac_change_chanctx_fill_iter,
					&arg);
		ath10k_mac_update_vif_chan(ar, arg.vifs, arg.n_vifs);
		kfree(arg.vifs);
	}

radar:
	ath10k_recalc_radar_detection(ar);

	/* FIXME: How to configure Rx chains properly? */

	/* No other actions are actually necessary. Firmware maintains channel
	 * definitions per vdev internally and there's no host-side channel
	 * context abstraction to configure, e.g. channel width.
	 */

unlock:
	mutex_unlock(&ar->conf_mutex);
}

static int
ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
				 struct ieee80211_vif *vif,
				 struct ieee80211_chanctx_conf *ctx)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = (void *)vif->drv_priv;
	int ret;

	mutex_lock(&ar->conf_mutex);

	ath10k_dbg(ar, ATH10K_DBG_MAC,
		   "mac chanctx assign ptr %p vdev_id %i\n",
		   ctx, arvif->vdev_id);

	if (WARN_ON(arvif->is_started)) {
		mutex_unlock(&ar->conf_mutex);
		return -EBUSY;
	}

	ret = ath10k_vdev_start(arvif, &ctx->def);
	if (ret) {
		ath10k_warn(ar, "failed to start vdev %i addr %pM on freq %d: %d\n",
			    arvif->vdev_id, vif->addr,
			    ctx->def.chan->center_freq, ret);
		goto err;
	}

	arvif->is_started = true;

	ret = ath10k_mac_vif_setup_ps(arvif);
	if (ret) {
		ath10k_warn(ar, "failed to update vdev %i ps: %d\n",
			    arvif->vdev_id, ret);
		goto err_stop;
	}

	if (vif->type == NL80211_IFTYPE_MONITOR) {
		ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, 0, vif->addr);
		if (ret) {
			ath10k_warn(ar, "failed to up monitor vdev %i: %d\n",
				    arvif->vdev_id, ret);
			goto err_stop;
		}

		arvif->is_up = true;
	}

	mutex_unlock(&ar->conf_mutex);
	return 0;

err_stop:
	ath10k_vdev_stop(arvif);
	arvif->is_started = false;
	ath10k_mac_vif_setup_ps(arvif);

err:
	mutex_unlock(&ar->conf_mutex);
	return ret;
}

static void
ath10k_mac_op_unassign_vif_chanctx(struct ieee80211_hw *hw,
				   struct ieee80211_vif *vif,
				   struct ieee80211_chanctx_conf *ctx)
{
	struct ath10k *ar = hw->priv;
	struct ath10k_vif *arvif = (void *)vif->drv_priv;
	int ret;

	mutex_lock(&ar->conf_mutex);

	ath10k_dbg(ar, ATH10K_DBG_MAC,
		   "mac chanctx unassign ptr %p vdev_id %i\n",
		   ctx, arvif->vdev_id);

	WARN_ON(!arvif->is_started);

	if (vif->type == NL80211_IFTYPE_MONITOR) {
		WARN_ON(!arvif->is_up);

		ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
		if (ret)
			ath10k_warn(ar, "failed to down monitor vdev %i: %d\n",
				    arvif->vdev_id, ret);

		arvif->is_up = false;
	}

	ret = ath10k_vdev_stop(arvif);
	if (ret)
		ath10k_warn(ar, "failed to stop vdev %i: %d\n",
			    arvif->vdev_id, ret);

	arvif->is_started = false;

	mutex_unlock(&ar->conf_mutex);
}

static int
ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw,
				 struct ieee80211_vif_chanctx_switch *vifs,
				 int n_vifs,
				 enum ieee80211_chanctx_switch_mode mode)
{
	struct ath10k *ar = hw->priv;

	mutex_lock(&ar->conf_mutex);

	ath10k_dbg(ar, ATH10K_DBG_MAC,
		   "mac chanctx switch n_vifs %d mode %d\n",
		   n_vifs, mode);
	ath10k_mac_update_vif_chan(ar, vifs, n_vifs);

	mutex_unlock(&ar->conf_mutex);
	return 0;
}

static void ath10k_mac_op_sta_pre_rcu_remove(struct ieee80211_hw *hw,
					     struct ieee80211_vif *vif,
					     struct ieee80211_sta *sta)
{
	struct ath10k *ar;
	struct ath10k_peer *peer;

	ar = hw->priv;

	list_for_each_entry(peer, &ar->peers, list)
		if (peer->sta == sta)
			peer->removed = true;
}

static const struct ieee80211_ops ath10k_ops = {
	.tx				= ath10k_mac_op_tx,
	.wake_tx_queue			= ath10k_mac_op_wake_tx_queue,
	.start				= ath10k_start,
	.stop				= ath10k_stop,
	.config				= ath10k_config,
	.add_interface			= ath10k_add_interface,
	.remove_interface		= ath10k_remove_interface,
	.configure_filter		= ath10k_configure_filter,
	.bss_info_changed		= ath10k_bss_info_changed,
	.hw_scan			= ath10k_hw_scan,
	.cancel_hw_scan			= ath10k_cancel_hw_scan,
	.set_key			= ath10k_set_key,
	.set_default_unicast_key        = ath10k_set_default_unicast_key,
	.sta_state			= ath10k_sta_state,
	.conf_tx			= ath10k_conf_tx,
	.remain_on_channel		= ath10k_remain_on_channel,
	.cancel_remain_on_channel	= ath10k_cancel_remain_on_channel,
	.set_rts_threshold		= ath10k_set_rts_threshold,
	.set_frag_threshold		= ath10k_mac_op_set_frag_threshold,
	.flush				= ath10k_flush,
	.tx_last_beacon			= ath10k_tx_last_beacon,
	.set_antenna			= ath10k_set_antenna,
	.get_antenna			= ath10k_get_antenna,
	.reconfig_complete		= ath10k_reconfig_complete,
	.get_survey			= ath10k_get_survey,
	.set_bitrate_mask		= ath10k_mac_op_set_bitrate_mask,
	.sta_rc_update			= ath10k_sta_rc_update,
	.get_tsf			= ath10k_get_tsf,
	.set_tsf			= ath10k_set_tsf,
	.ampdu_action			= ath10k_ampdu_action,
	.get_et_sset_count		= ath10k_debug_get_et_sset_count,
	.get_et_stats			= ath10k_debug_get_et_stats,
	.get_et_strings			= ath10k_debug_get_et_strings,
	.add_chanctx			= ath10k_mac_op_add_chanctx,
	.remove_chanctx			= ath10k_mac_op_remove_chanctx,
	.change_chanctx			= ath10k_mac_op_change_chanctx,
	.assign_vif_chanctx		= ath10k_mac_op_assign_vif_chanctx,
	.unassign_vif_chanctx		= ath10k_mac_op_unassign_vif_chanctx,
	.switch_vif_chanctx		= ath10k_mac_op_switch_vif_chanctx,
	.sta_pre_rcu_remove		= ath10k_mac_op_sta_pre_rcu_remove,

	CFG80211_TESTMODE_CMD(ath10k_tm_cmd)

#ifdef CONFIG_PM
	.suspend			= ath10k_wow_op_suspend,
	.resume				= ath10k_wow_op_resume,
#endif
#ifdef CONFIG_MAC80211_DEBUGFS
	.sta_add_debugfs		= ath10k_sta_add_debugfs,
#endif
};

#define CHAN2G(_channel, _freq, _flags) { \
	.band			= NL80211_BAND_2GHZ, \
	.hw_value		= (_channel), \
	.center_freq		= (_freq), \
	.flags			= (_flags), \
	.max_antenna_gain	= 0, \
	.max_power		= 30, \
}

#define CHAN5G(_channel, _freq, _flags) { \
	.band			= NL80211_BAND_5GHZ, \
	.hw_value		= (_channel), \
	.center_freq		= (_freq), \
	.flags			= (_flags), \
	.max_antenna_gain	= 0, \
	.max_power		= 30, \
}

static const struct ieee80211_channel ath10k_2ghz_channels[] = {
	CHAN2G(1, 2412, 0),
	CHAN2G(2, 2417, 0),
	CHAN2G(3, 2422, 0),
	CHAN2G(4, 2427, 0),
	CHAN2G(5, 2432, 0),
	CHAN2G(6, 2437, 0),
	CHAN2G(7, 2442, 0),
	CHAN2G(8, 2447, 0),
	CHAN2G(9, 2452, 0),
	CHAN2G(10, 2457, 0),
	CHAN2G(11, 2462, 0),
	CHAN2G(12, 2467, 0),
	CHAN2G(13, 2472, 0),
	CHAN2G(14, 2484, 0),
};

static const struct ieee80211_channel ath10k_5ghz_channels[] = {
	CHAN5G(36, 5180, 0),
	CHAN5G(40, 5200, 0),
	CHAN5G(44, 5220, 0),
	CHAN5G(48, 5240, 0),
	CHAN5G(52, 5260, 0),
	CHAN5G(56, 5280, 0),
	CHAN5G(60, 5300, 0),
	CHAN5G(64, 5320, 0),
	CHAN5G(100, 5500, 0),
	CHAN5G(104, 5520, 0),
	CHAN5G(108, 5540, 0),
	CHAN5G(112, 5560, 0),
	CHAN5G(116, 5580, 0),
	CHAN5G(120, 5600, 0),
	CHAN5G(124, 5620, 0),
	CHAN5G(128, 5640, 0),
	CHAN5G(132, 5660, 0),
	CHAN5G(136, 5680, 0),
	CHAN5G(140, 5700, 0),
	CHAN5G(144, 5720, 0),
	CHAN5G(149, 5745, 0),
	CHAN5G(153, 5765, 0),
	CHAN5G(157, 5785, 0),
	CHAN5G(161, 5805, 0),
	CHAN5G(165, 5825, 0),
};

struct ath10k *ath10k_mac_create(size_t priv_size)
{
	struct ieee80211_hw *hw;
	struct ath10k *ar;

	hw = ieee80211_alloc_hw(sizeof(struct ath10k) + priv_size, &ath10k_ops);
	if (!hw)
		return NULL;

	ar = hw->priv;
	ar->hw = hw;

	return ar;
}

void ath10k_mac_destroy(struct ath10k *ar)
{
	ieee80211_free_hw(ar->hw);
}

static const struct ieee80211_iface_limit ath10k_if_limits[] = {
	{
		.max	= 8,
		.types	= BIT(NL80211_IFTYPE_STATION)
			| BIT(NL80211_IFTYPE_P2P_CLIENT)
	},
	{
		.max	= 3,
		.types	= BIT(NL80211_IFTYPE_P2P_GO)
	},
	{
		.max	= 1,
		.types	= BIT(NL80211_IFTYPE_P2P_DEVICE)
	},
	{
		.max	= 7,
		.types	= BIT(NL80211_IFTYPE_AP)
#ifdef CONFIG_MAC80211_MESH
			| BIT(NL80211_IFTYPE_MESH_POINT)
#endif
	},
};

static const struct ieee80211_iface_limit ath10k_10x_if_limits[] = {
	{
		.max	= 8,
		.types	= BIT(NL80211_IFTYPE_AP)
#ifdef CONFIG_MAC80211_MESH
			| BIT(NL80211_IFTYPE_MESH_POINT)
#endif
	},
	{
		.max	= 1,
		.types	= BIT(NL80211_IFTYPE_STATION)
	},
};

static struct ieee80211_iface_limit ath10k_10x_ct_if_limits[] = {
	{
	.max	= DEF_TARGET_10X_NUM_VDEVS_CT,
	.types	= BIT(NL80211_IFTYPE_STATION)
		| BIT(NL80211_IFTYPE_P2P_CLIENT)
	},
	{
	.max	= 3,
	.types	= BIT(NL80211_IFTYPE_P2P_GO)
	},
	{
	.max	= 7,
	.types	= BIT(NL80211_IFTYPE_AP)
	},
	{
	.max	= 1,
	.types	= BIT(NL80211_IFTYPE_ADHOC)
	},
};

static struct ieee80211_iface_combination ath10k_if_comb[] = {
	{
		.limits = ath10k_if_limits,
		.n_limits = ARRAY_SIZE(ath10k_if_limits),
		.max_interfaces = 8,
		.num_different_channels = 1,
		.beacon_int_infra_match = true,
	},
};

static struct ieee80211_iface_combination ath10k_10x_if_comb[] = {
	{
		.limits = ath10k_10x_if_limits,
		.n_limits = ARRAY_SIZE(ath10k_10x_if_limits),
		.max_interfaces = 8,
		.num_different_channels = 1,
		.beacon_int_infra_match = true,
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
					BIT(NL80211_CHAN_WIDTH_20) |
					BIT(NL80211_CHAN_WIDTH_40) |
					BIT(NL80211_CHAN_WIDTH_80),
#endif
	},
};

static const struct ieee80211_iface_limit ath10k_tlv_if_limit[] = {
	{
		.max = 2,
		.types = BIT(NL80211_IFTYPE_STATION),
	},
	{
		.max = 2,
		.types = BIT(NL80211_IFTYPE_AP) |
#ifdef CONFIG_MAC80211_MESH
			 BIT(NL80211_IFTYPE_MESH_POINT) |
#endif
			 BIT(NL80211_IFTYPE_P2P_CLIENT) |
			 BIT(NL80211_IFTYPE_P2P_GO),
	},
	{
		.max = 1,
		.types = BIT(NL80211_IFTYPE_P2P_DEVICE),
	},
};

static const struct ieee80211_iface_limit ath10k_tlv_qcs_if_limit[] = {
	{
		.max = 2,
		.types = BIT(NL80211_IFTYPE_STATION),
	},
	{
		.max = 2,
		.types = BIT(NL80211_IFTYPE_P2P_CLIENT),
	},
	{
		.max = 1,
		.types = BIT(NL80211_IFTYPE_AP) |
#ifdef CONFIG_MAC80211_MESH
			 BIT(NL80211_IFTYPE_MESH_POINT) |
#endif
			 BIT(NL80211_IFTYPE_P2P_GO),
	},
	{
		.max = 1,
		.types = BIT(NL80211_IFTYPE_P2P_DEVICE),
	},
};

static const struct ieee80211_iface_limit ath10k_tlv_if_limit_ibss[] = {
	{
		.max = 1,
		.types = BIT(NL80211_IFTYPE_STATION),
	},
	{
		.max = 1,
		.types = BIT(NL80211_IFTYPE_ADHOC),
	},
};

static struct ieee80211_iface_combination ath10k_10x_ct_if_comb[] = {
	{
		.limits = ath10k_10x_ct_if_limits,
		.n_limits = ARRAY_SIZE(ath10k_10x_ct_if_limits),
		.max_interfaces = DEF_TARGET_10X_NUM_VDEVS_CT,
		.num_different_channels = 1,
		.beacon_int_infra_match = true,
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
					BIT(NL80211_CHAN_WIDTH_20) |
					BIT(NL80211_CHAN_WIDTH_40) |
					BIT(NL80211_CHAN_WIDTH_80),
#endif
	},
};

/* FIXME: This is not thouroughly tested. These combinations may over- or
 * underestimate hw/fw capabilities.
 */
static struct ieee80211_iface_combination ath10k_tlv_if_comb[] = {
	{
		.limits = ath10k_tlv_if_limit,
		.num_different_channels = 1,
		.max_interfaces = 4,
		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit),
	},
	{
		.limits = ath10k_tlv_if_limit_ibss,
		.num_different_channels = 1,
		.max_interfaces = 2,
		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss),
	},
};

static struct ieee80211_iface_combination ath10k_tlv_qcs_if_comb[] = {
	{
		.limits = ath10k_tlv_if_limit,
		.num_different_channels = 1,
		.max_interfaces = 4,
		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit),
	},
	{
		.limits = ath10k_tlv_qcs_if_limit,
		.num_different_channels = 2,
		.max_interfaces = 4,
		.n_limits = ARRAY_SIZE(ath10k_tlv_qcs_if_limit),
	},
	{
		.limits = ath10k_tlv_if_limit_ibss,
		.num_different_channels = 1,
		.max_interfaces = 2,
		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss),
	},
};

static const struct ieee80211_iface_limit ath10k_10_4_if_limits[] = {
	{
		.max = 1,
		.types = BIT(NL80211_IFTYPE_STATION),
	},
	{
		.max	= 16,
		.types	= BIT(NL80211_IFTYPE_AP)
#ifdef CONFIG_MAC80211_MESH
			| BIT(NL80211_IFTYPE_MESH_POINT)
#endif
	},
};

static const struct ieee80211_iface_combination ath10k_10_4_if_comb[] = {
	{
		.limits = ath10k_10_4_if_limits,
		.n_limits = ARRAY_SIZE(ath10k_10_4_if_limits),
		.max_interfaces = 16,
		.num_different_channels = 1,
		.beacon_int_infra_match = true,
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
					BIT(NL80211_CHAN_WIDTH_20) |
					BIT(NL80211_CHAN_WIDTH_40) |
					BIT(NL80211_CHAN_WIDTH_80),
#endif
	},
};

static struct ieee80211_iface_limit ath10k_10_4_ct_if_limits[] = {
	{
		.max = 1,
		.types = BIT(NL80211_IFTYPE_STATION),
	},
	{
		.max	= 16,
		.types	= BIT(NL80211_IFTYPE_AP)
#ifdef CONFIG_MAC80211_MESH
			| BIT(NL80211_IFTYPE_MESH_POINT)
#endif
	},
	{
	.max	= 1,
	.types	= BIT(NL80211_IFTYPE_ADHOC)
	},
};

static struct ieee80211_iface_combination ath10k_10_4_ct_if_comb[] = {
	{
		.limits = ath10k_10_4_ct_if_limits,
		.n_limits = ARRAY_SIZE(ath10k_10_4_ct_if_limits),
		.max_interfaces = 16,
		.num_different_channels = 1,
		.beacon_int_infra_match = true,
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
					BIT(NL80211_CHAN_WIDTH_20) |
					BIT(NL80211_CHAN_WIDTH_40) |
					BIT(NL80211_CHAN_WIDTH_160) | /* TODO:  Verify --Ben */
					BIT(NL80211_CHAN_WIDTH_80),
#endif
	},
};

static void ath10k_get_arvif_iter(void *data, u8 *mac,
				  struct ieee80211_vif *vif)
{
	struct ath10k_vif_iter *arvif_iter = data;
	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);

	if (arvif->vdev_id == arvif_iter->vdev_id)
		arvif_iter->arvif = arvif;
}

struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id)
{
	struct ath10k_vif_iter arvif_iter;
	u32 flags;

	memset(&arvif_iter, 0, sizeof(struct ath10k_vif_iter));
	arvif_iter.vdev_id = vdev_id;

	flags = IEEE80211_IFACE_ITER_RESUME_ALL;
	ieee80211_iterate_active_interfaces_atomic(ar->hw,
						   flags,
						   ath10k_get_arvif_iter,
						   &arvif_iter);
	if (!arvif_iter.arvif) {
		ath10k_warn(ar, "No VIF found for vdev %d\n", vdev_id);
		return NULL;
	}

	return arvif_iter.arvif;
}

int ath10k_copy_comb(struct ath10k* ar,
		     const struct ieee80211_iface_combination* comb,
		     int array_len)
{
	int i;
	int ln;

	/* Clean out any existing combinations. */
	ath10k_core_free_limits(ar);

	memcpy(&ar->if_comb, comb, sizeof(*comb) * array_len);
	for (i = 0; i<array_len; i++) {
		ln = comb[i].n_limits * sizeof(*(comb[i].limits));
		ar->if_comb[i].limits = kzalloc(ln, GFP_KERNEL);
		if (!ar->if_comb[i].limits)
			return -ENOMEM;
		memcpy((void*)(ar->if_comb[i].limits), comb[i].limits, ln);
	}

	ar->hw->wiphy->iface_combinations = ar->if_comb;
	ar->hw->wiphy->n_iface_combinations = array_len;
	return 0;
}

/* Force over-ride const logic in core so we don't have to patch core. */
#define ATH_ASSIGN_CONST_U16(a,b)                   \
   do {                                             \
      u16* __val_p = (u16*)(&(a));                  \
      *__val_p = b;                                 \
   } while (0)

#ifdef CPTCFG_MAC80211_LEDS
static const struct ieee80211_tpt_blink ath10k_tpt_blink[] = {
	{ .throughput = 0 * 1024, .blink_time = 334 },
	{ .throughput = 1 * 1024, .blink_time = 260 },
	{ .throughput = 2 * 1024, .blink_time = 220 },
	{ .throughput = 5 * 1024, .blink_time = 190 },
	{ .throughput = 10 * 1024, .blink_time = 170 },
	{ .throughput = 25 * 1024, .blink_time = 150 },
	{ .throughput = 54 * 1024, .blink_time = 130 },
	{ .throughput = 120 * 1024, .blink_time = 110 },
	{ .throughput = 265 * 1024, .blink_time = 80 },
	{ .throughput = 586 * 1024, .blink_time = 50 },
};
#endif

int ath10k_mac_register(struct ath10k *ar)
{
	static const u32 cipher_suites[] = {
		WLAN_CIPHER_SUITE_WEP40,
		WLAN_CIPHER_SUITE_WEP104,
		WLAN_CIPHER_SUITE_TKIP,
		WLAN_CIPHER_SUITE_CCMP,
		WLAN_CIPHER_SUITE_AES_CMAC,
	};
	struct ieee80211_supported_band *band;
	void *channels;
	int ret;

	SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr);

	SET_IEEE80211_DEV(ar->hw, ar->dev);

	BUILD_BUG_ON((ARRAY_SIZE(ath10k_2ghz_channels) +
		      ARRAY_SIZE(ath10k_5ghz_channels)) !=
		     ATH10K_NUM_CHANS);

	if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
		channels = kmemdup(ath10k_2ghz_channels,
				   sizeof(ath10k_2ghz_channels),
				   GFP_KERNEL);
		if (!channels) {
			ret = -ENOMEM;
			goto err_free;
		}

		band = &ar->mac.sbands[NL80211_BAND_2GHZ];
		band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels);
		band->channels = channels;
		band->n_bitrates = ath10k_g_rates_size;
		band->bitrates = ath10k_g_rates;

		ar->hw->wiphy->bands[NL80211_BAND_2GHZ] = band;
	}

	if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
		channels = kmemdup(ath10k_5ghz_channels,
				   sizeof(ath10k_5ghz_channels),
				   GFP_KERNEL);
		if (!channels) {
			ret = -ENOMEM;
			goto err_free;
		}

		band = &ar->mac.sbands[NL80211_BAND_5GHZ];
		band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels);
		band->channels = channels;
		band->n_bitrates = ath10k_a_rates_size;
		band->bitrates = ath10k_a_rates;
		ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
	}

	ath10k_mac_setup_ht_vht_cap(ar);

	ar->hw->wiphy->interface_modes =
		BIT(NL80211_IFTYPE_STATION) |
		BIT(NL80211_IFTYPE_AP) |
		BIT(NL80211_IFTYPE_MESH_POINT);

	ar->hw->wiphy->available_antennas_rx = ar->cfg_rx_chainmask;
	ar->hw->wiphy->available_antennas_tx = ar->cfg_tx_chainmask;

	if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->normal_mode_fw.fw_file.fw_features))
		ar->hw->wiphy->interface_modes |=
			BIT(NL80211_IFTYPE_P2P_DEVICE) |
			BIT(NL80211_IFTYPE_P2P_CLIENT) |
			BIT(NL80211_IFTYPE_P2P_GO);

	ieee80211_hw_set(ar->hw, SIGNAL_DBM);
	ieee80211_hw_set(ar->hw, SUPPORTS_PS);
	ieee80211_hw_set(ar->hw, SUPPORTS_DYNAMIC_PS);
	ieee80211_hw_set(ar->hw, MFP_CAPABLE);
	ieee80211_hw_set(ar->hw, REPORTS_TX_ACK_STATUS);
	ieee80211_hw_set(ar->hw, HAS_RATE_CONTROL);
	ieee80211_hw_set(ar->hw, AP_LINK_PS);
	ieee80211_hw_set(ar->hw, SPECTRUM_MGMT);
	ieee80211_hw_set(ar->hw, SUPPORT_FAST_XMIT);
	if (ar->bmiss_offload_max_vdev > 0)
		ieee80211_hw_set(ar->hw, CONNECTION_MONITOR);
	ieee80211_hw_set(ar->hw, SUPPORTS_PER_STA_GTK);
	ieee80211_hw_set(ar->hw, WANT_MONITOR_VIF);
	ieee80211_hw_set(ar->hw, CHANCTX_STA_CSA);
	ieee80211_hw_set(ar->hw, QUEUE_CONTROL);

	if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
		ieee80211_hw_set(ar->hw, SW_CRYPTO_CONTROL);

	ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
	ar->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;

	if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
		ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS;

	if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) {
		ieee80211_hw_set(ar->hw, AMPDU_AGGREGATION);
		ieee80211_hw_set(ar->hw, TX_AMPDU_SETUP_IN_HW);
	}

	ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID;
	ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN;

	ar->hw->vif_data_size = sizeof(struct ath10k_vif);
	ar->hw->sta_data_size = sizeof(struct ath10k_sta);
	ar->hw->txq_data_size = sizeof(struct ath10k_txq);

	ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;

	if (test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) {
		ar->hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;

		/* Firmware delivers WPS/P2P Probe Requests frames to driver so
		 * that userspace (e.g. wpa_supplicant/hostapd) can generate
		 * correct Probe Responses. This is more of a hack advert..
		 */
		ar->hw->wiphy->probe_resp_offload |=
			NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
			NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
			NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
	}

	if (test_bit(WMI_SERVICE_TDLS, ar->wmi.svc_map))
		ar->hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;

	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
	ar->hw->wiphy->max_remain_on_channel_duration = 5000;

	ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
	ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE |
				   NL80211_FEATURE_AP_SCAN;

	ar->hw->wiphy->max_ap_assoc_sta = ar->max_num_stations;

	ret = ath10k_wow_init(ar);
	if (ret) {
		ath10k_warn(ar, "failed to init wow: %d\n", ret);
		goto err_free;
	}

	wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_VHT_IBSS);

	/*
	 * on LL hardware queues are managed entirely by the FW
	 * so we only advertise to mac we can do the queues thing
	 */
	ar->hw->queues = IEEE80211_MAX_QUEUES;

	/* vdev_ids are used as hw queue numbers. Make sure offchan tx queue is
	 * something that vdev_ids can't reach so that we don't stop the queue
	 * accidentally.
	 */
	ar->hw->offchannel_tx_hw_queue = IEEE80211_MAX_QUEUES - 1;

	switch (ar->running_fw->fw_file.wmi_op_version) {
	case ATH10K_FW_WMI_OP_VERSION_MAIN:
		ret = ath10k_copy_comb(ar, ath10k_if_comb, ARRAY_SIZE(ath10k_if_comb));
		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
		break;
	case ATH10K_FW_WMI_OP_VERSION_TLV:
		if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
			ret = ath10k_copy_comb(ar, ath10k_tlv_qcs_if_comb,
					       ARRAY_SIZE(ath10k_tlv_qcs_if_comb));
		} else {
			ret = ath10k_copy_comb(ar, ath10k_tlv_if_comb,
					       ARRAY_SIZE(ath10k_tlv_if_comb));
		}
		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
		break;
	case ATH10K_FW_WMI_OP_VERSION_10_1:
		if (test_bit(ATH10K_FW_FEATURE_WMI_10X_CT,
			     ar->normal_mode_fw.fw_file.fw_features)) {
			ret = ath10k_copy_comb(ar, ath10k_10x_ct_if_comb,
					       ARRAY_SIZE(ath10k_10x_ct_if_comb));
			if (ret != 0)
				goto err_free;

			ATH_ASSIGN_CONST_U16(ar->if_comb[0].limits[0].max, ar->max_num_vdevs);
			ar->if_comb[0].max_interfaces = ar->max_num_vdevs;
			ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);

			/* CT firmware can do tx-sw-crypt if properly configured */
			if (test_bit(ATH10K_FW_FEATURE_CT_RXSWCRYPT,
				     ar->running_fw->fw_file.fw_features) &&
			    ath10k_modparam_nohwcrypt)
				__clear_bit(IEEE80211_HW_SW_CRYPTO_CONTROL, ar->hw->flags);
		} else {
			ret = ath10k_copy_comb(ar, ath10k_10x_if_comb,
					       ARRAY_SIZE(ath10k_10x_if_comb));
		}
		break;
	case ATH10K_FW_WMI_OP_VERSION_10_2:
	case ATH10K_FW_WMI_OP_VERSION_10_2_4:
		if (test_bit(ATH10K_FW_FEATURE_WMI_10X_CT,
			     ar->running_fw->fw_file.fw_features)) {
			ret = ath10k_copy_comb(ar, ath10k_10x_ct_if_comb,
					       ARRAY_SIZE(ath10k_10x_ct_if_comb));
			if (ret != 0)
				goto err_free;

			ATH_ASSIGN_CONST_U16(ar->if_comb[0].limits[0].max, ar->max_num_vdevs);
			ar->if_comb[0].max_interfaces = ar->max_num_vdevs;

			ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);

			/* CT firmware can do tx-sw-crypt if properly configured */
			if (test_bit(ATH10K_FW_FEATURE_CT_RXSWCRYPT,
				     ar->running_fw->fw_file.fw_features) &&
			    ath10k_modparam_nohwcrypt)
				__clear_bit(IEEE80211_HW_SW_CRYPTO_CONTROL, ar->hw->flags);
		} else {
			ret = ath10k_copy_comb(ar, ath10k_10x_if_comb,
					       ARRAY_SIZE(ath10k_10x_if_comb));
		}
		break;
	case ATH10K_FW_WMI_OP_VERSION_10_4:
		if (test_bit(ATH10K_FW_FEATURE_WMI_10X_CT,
			     ar->running_fw->fw_file.fw_features)) {
			ret = ath10k_copy_comb(ar, ath10k_10_4_ct_if_comb,
					       ARRAY_SIZE(ath10k_10_4_ct_if_comb));
			if (ret != 0)
				goto err_free;

			ATH_ASSIGN_CONST_U16(ar->if_comb[0].limits[0].max, ar->max_num_vdevs);
			ar->if_comb[0].max_interfaces = ar->max_num_vdevs;

			if (ar->if_comb[0].limits[1].max > ar->max_num_vdevs)
				ATH_ASSIGN_CONST_U16(ar->if_comb[0].limits[1].max, ar->max_num_vdevs);

			ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);

			/* CT firmware can do tx-sw-crypt if properly configured */
			if (test_bit(ATH10K_FW_FEATURE_CT_RXSWCRYPT,
				     ar->running_fw->fw_file.fw_features) &&
			    ath10k_modparam_nohwcrypt)
				__clear_bit(IEEE80211_HW_SW_CRYPTO_CONTROL, ar->hw->flags);
		} else {
			ret = ath10k_copy_comb(ar, ath10k_10_4_if_comb,
					       ARRAY_SIZE(ath10k_10_4_if_comb));
		}
		break;
	case ATH10K_FW_WMI_OP_VERSION_UNSET:
	case ATH10K_FW_WMI_OP_VERSION_MAX:
		WARN_ON(1);
		ret = -EINVAL;
		goto err_free;
	}

	if (ret != 0)
		goto err_free;

	if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
		ar->hw->netdev_features = NETIF_F_HW_CSUM;

	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
		/* Init ath dfs pattern detector */
		ar->ath_common.debug_mask = ATH_DBG_DFS;
		ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common,
							     NL80211_DFS_UNSET);

		if (!ar->dfs_detector)
			ath10k_warn(ar, "failed to initialise DFS pattern detector\n");
	}

	ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy,
			    ath10k_reg_notifier);
	if (ret) {
		ath10k_err(ar, "failed to initialise regulatory: %i\n", ret);
		goto err_dfs_detector_exit;
	}

	ar->hw->wiphy->cipher_suites = cipher_suites;
	ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);

#ifdef CPTCFG_MAC80211_LEDS
	ieee80211_create_tpt_led_trigger(ar->hw,
		IEEE80211_TPT_LEDTRIG_FL_RADIO, ath10k_tpt_blink,
		ARRAY_SIZE(ath10k_tpt_blink));
#endif

	ret = ieee80211_register_hw(ar->hw);
	if (ret) {
		ath10k_err(ar, "failed to register ieee80211: %d\n", ret);
		goto err_dfs_detector_exit;
	}

	if (!ath_is_world_regd(&ar->ath_common.regulatory)) {
		ret = regulatory_hint(ar->hw->wiphy,
				      ar->ath_common.regulatory.alpha2);
		if (ret)
			goto err_unregister;
	}

	return 0;

err_unregister:
	ieee80211_unregister_hw(ar->hw);

err_dfs_detector_exit:
	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
		ar->dfs_detector->exit(ar->dfs_detector);

err_free:
	kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
	kfree(ar->mac.sbands[NL80211_BAND_5GHZ].channels);

	SET_IEEE80211_DEV(ar->hw, NULL);
	return ret;
}

void ath10k_mac_unregister(struct ath10k *ar)
{
	ieee80211_unregister_hw(ar->hw);

	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
		ar->dfs_detector->exit(ar->dfs_detector);

	kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
	kfree(ar->mac.sbands[NL80211_BAND_5GHZ].channels);

	SET_IEEE80211_DEV(ar->hw, NULL);
}