Support for eltako fsb12

[UsefulVid]

It would be great if Support for eltako fsb12 could be supported.

mak-gitdev/HA_enoceanmqtt#99

I have a usb300 and ready to do some testing if needed.

[grimmpp]

Hello @UsefulVid,

USB300 is now supported in new version 1.4.0.

Regarding the general integration of series 12 I'm not really sure if that will work because of the prerequisites we need. I can of course add some functionality which could help you. Not sure if that would be enough for a working integration. I will ask the eltako guys what they think if we have the required preconditions.

For switches I added the possibility to react on switch telegrams. So instead of waiting for an status update telegram of the actuator you can react on a wall-mounted switch. For sending telegram you need to enable under general setting fast_status_change otherwise the switch in HA is also waiting for an incoming status update of the actuator. Unfortunately, if you want to use two wall-mounted switches it won't work anymore and if HA is not getting all telegrams you are out of sync until you push the switch again. ...

Just let me know what you think could help you.

[UsefulVid]

Hi @grimmpp thanks for you help!
The stick is added:

How do I proceed from there? I read the manual and there is kind of a pairing mode for the fsb12 but I do not know what to trigger from HA to make this work.

[UsefulVid]

Hello @UsefulVid,

USB300 is now supported in new version 1.4.0.

Regarding the general integration of series 12 I'm not really sure if that will work because of the prerequisites we need. I can of course add some functionality which could help you. Not sure if that would be enough for a working integration. I will ask the eltako guys what they think if we have the required preconditions.

For switches I added the possibility to react on switch telegrams. So instead of waiting for an status update telegram of the actuator you can react on a wall-mounted switch. For sending telegram you need to enable under general setting fast_status_change otherwise the switch in HA is also waiting for an incoming status update of the actuator. Unfortunately, if you want to use two wall-mounted switches it won't work anymore and if HA is not getting all telegrams you are out of sync until you push the switch again. ...

Just let me know what you think could help you.

Just wanted to push this topic :) Help would be much appreciated