Skip to content

Latest commit

 

History

History
278 lines (200 loc) · 10.6 KB

README.md

File metadata and controls

278 lines (200 loc) · 10.6 KB
Raw

PODMAN logo

Cirrus-CI

Similar to other integrated github CI/CD services, Cirrus utilizes a simple YAML-based configuration/description file: .cirrus.yml. Ref: https://cirrus-ci.org/

Workflow

All tasks execute in parallel, unless there are conditions or dependencies which alter this behavior. Within each task, each script executes in sequence, so long as any previous script exited successfully. The overall state of each task (pass or fail) is set based on the exit status of the last script to execute.

gating Task

N/B: Steps below are performed by automation

  1. Launch a purpose-built container in Cirrus's community cluster. For container image details, please see the contributors guide.

  2. validate: Perform standard make validate source verification, Should run for less than a minute or two.

  3. lint: Execute regular make lint to check for any code cruft. Should also run for less than a few minutes.

  4. vendor: runs make vendor followed by ./hack/tree_status.sh to check whether the git tree is clean. The reasoning for that is to make sure that the vendor.conf, the code and the vendored packages in ./vendor are in sync at all times.

meta Task

N/B: Steps below are performed by automation

  1. Launch a container built from definition in ./contrib/imgts.

  2. Update VM Image metadata to help track usage across all automation.

  3. Always exits successfully unless there's a major problem.

testing Task

N/B: Steps below are performed by automation

  1. After gating passes, spin up one VM per matrix: image_name item. Once accessible, ssh into each VM as the root user.

  2. setup_environment.sh: Configure root's .bash_profile for all subsequent scripts (each run in a new shell). Any distribution-specific environment variables are also defined here. For example, setting tags/flags to use compiling.

  3. integration_test.sh: Execute integration-testing. This is much more involved, and relies on access to external resources like container images and code from other repositories. Total execution time is capped at 2-hours (includes all the above) but this script normally completes in less than an hour.

special_testing_cross Task

Confirm that cross-compile of podman-remote functions for both windows and darwin targets.

special_testing_cgroupv2 Task

Use the latest Fedora release with the required kernel options pre-set for exercising cgroups v2 with Podman integration tests. Also depends on having SPECIALMODE set to 'cgroupv2`

test_build_cache_images_task Task

Modifying the contents of cache-images is tested by making changes to one or more of the ./contrib/cirrus/packer/*_setup.sh files. Then in the PR description, add the magic string: ***CIRRUS: TEST IMAGES***

N/B: Steps below are performed by automation

  1. setup_environment.sh: Same as for other tasks.

  2. build_vm_images.sh: Utilize the packer tool to produce new VM images. Create a new VM from each base-image, connect to them with ssh, and perform the steps as defined by the $PACKER_BASE/libpod_images.yml file:

    1. On a base-image VM, as root, copy the current state of the repository into /tmp/libpod.
    2. Execute distribution-specific scripts to prepare the image for use. For example, fedora_setup.sh.
    3. If successful, shut down each VM and record the names, and dates into a json manifest file.
    4. Move the manifest file, into a google storage bucket object. This is a retained as a secondary method for tracking/auditing creation of VM images, should it ever be needed.

verify_test_built_images Task

Only runs following successful test_build_cache_images_task task. Uses images following the standard naming format; however, only runs a limited sub-set of automated tests. Validating newly built images fully, requires updating .cirrus.yml.

N/B: Steps below are performed by automation

  1. Using the just build VM images, launch VMs and wait for them to boot.

  2. Execute the setup_environment.sh as in the testing task.

  3. Execute the integration_test.sh as in the testing task.

Manual Steps: Assuming the automated steps pass, then you'll find the new image names displayed at the end of the test_build_cache_images. For example:

...cut...
==> Builds finished. The artifacts of successful builds are:
--> ubuntu-18: A disk image was created: ubuntu-18-libpod-5699523102900224
--> ubuntu-18:
--> fedora-29: A disk image was created: fedora-29-libpod-5699523102900224
--> fedora-29:
--> fedora-28: A disk image was created: fedora-28-libpod-5699523102900224

Now edit .cirrus.yml, updating the *_IMAGE_NAME lines to reflect the images from above:

env:
    ...cut...
    ####
    #### Cache-image names to test with
    ###
    FEDORA_CACHE_IMAGE_NAME: "fedora-29-libpod-5699523102900224"
    PRIOR_FEDORA_CACHE_IMAGE_NAME: "fedora-28-libpod-5699523102900224"
    UBUNTU_CACHE_IMAGE_NAME: "ubuntu-18-libpod-5699523102900224"
    ...cut...

NOTE: If re-using the same PR with new images in .cirrus.yml, take care to also update the PR description to remove the magic ***CIRRUS: TEST IMAGES*** string. Keeping it and --force pushing would needlessly cause Cirrus-CI to build and test images again.

release Task

Gathers up zip files uploaded by other tasks, from the local Cirrus-CI caching service. Depending on the execution context (a PR or a branch), this task uploads the files found to storage buckets at:

Note: Repeated builds from the same PR or branch, will clobber previous archives by design. This is intended so that the "latest" archive is always available at a consistent URL. The precise details regarding a particular build is encoded within the zip-archive comment.

Base-images

Base-images are VM disk-images specially prepared for executing as GCE VMs. In particular, they run services on startup similar in purpose/function as the standard 'cloud-init' services.

  • The google services are required for full support of ssh-key management and GCE OAuth capabilities. Google provides native images in GCE with services pre-installed, for many platforms. For example, RHEL, CentOS, and Ubuntu.

  • Google does not provide any images for Fedora (as of 5/2019), nor do they provide a base-image prepared to run packer for creating other images in the test_build_vm_images Task (above).

  • Base images do not need to be produced often, but doing so completely manually would be time-consuming and error-prone. Therefor a special semi-automatic Makefile target is provided to assist with producing all the base-images: libpod_base_images

To produce new base-images, including an image-builder-image (used by the cache_images Task) some input parameters are required:

  • GCP_PROJECT_ID: The complete GCP project ID string e.g. foobar-12345 identifying where the images will be stored.

  • GOOGLE_APPLICATION_CREDENTIALS: A JSON file containing credentials for a GCE service account. This can be a service account or end-user credentials

  • Optionally, CSV's may be specified to PACKER_BUILDS to limit the base-images produced. For example, PACKER_BUILDS=fedora,image-builder-image.

If there is an existing 'image-builder-image' within GCE, it may be utilized to produce base-images (in addition to cache-images). However it must be created with support for nested-virtualization, and with elevated cloud privileges (to access GCE, from within the GCE VM). For example:

$ alias pgcloud='sudo podman run -it --rm -e AS_ID=$UID
    -e AS_USER=$USER -v $HOME:$HOME:z quay.io/cevich/gcloud_centos:latest'

$ URL=https://www.googleapis.com/auth
$ SCOPES=$URL/userinfo.email,$URL/compute,$URL/devstorage.full_control

# The --min-cpu-platform is critical for nested-virt.
$ pgcloud compute instances create $USER-making-images \
    --image-family image-builder-image \
    --boot-disk-size "200GB" \
    --min-cpu-platform "Intel Haswell" \
    --machine-type n1-standard-2 \
    --scopes $SCOPES

Alternatively, if there is no image-builder-image available yet, a bare-metal CentOS 7 machine with network access to GCE is required. Software dependencies can be obtained from the packer/image-builder-image_base_setup.sh script.

In both cases, the following can be used to setup and build base-images.

$ IP_ADDRESS=1.2.3.4  # EXTERNAL_IP from command output above
$ rsync -av $PWD centos@$IP_ADDRESS:.
$ scp $GOOGLE_APPLICATION_CREDENTIALS centos@$IP_ADDRESS:.
$ ssh centos@$IP_ADDRESS
...

When ready, change to the packer sub-directory, and build the images:

$ cd libpod/contrib/cirrus/packer
$ make libpod_base_images GCP_PROJECT_ID=<VALUE> \
    GOOGLE_APPLICATION_CREDENTIALS=<VALUE> \
    PACKER_BUILDS=<OPTIONAL>

Assuming this is successful (hence the semi-automatic part), packer will produce a packer-manifest.json output file. This contains the base-image names suitable for updating in .cirrus.yml, env keys *_BASE_IMAGE.

On failure, it should be possible to determine the problem from the packer output. Sometimes that means setting PACKER_LOG=1 and troubleshooting the nested virt calls. It's also possible to observe the (nested) qemu-kvm console output. Simply set the TTYDEV parameter, for example:

$ make libpod_base_images ... TTYDEV=$(tty)
  ...

$SPECIALMODE

Some tasks alter their behavior based on this value. A summary of supported values follows:

  • none: Operate as normal, this is the default value if unspecified.
  • rootless: Causes a random, ordinary user account to be created and utilized for testing.
  • in_podman: Causes testing to occur within a container executed by Podman on the host.
  • cgroupv2: The kernel on this VM was prepared with options to enable v2 cgroups
  • windows: See darwin
  • darwin: Signals the special_testing_cross task to cross-compile the remote client.