Skip to content

Latest commit

 

History

History
86 lines (70 loc) · 2.29 KB

yandex_transport.markdown

File metadata and controls

86 lines (70 loc) · 2.29 KB
Raw
title description logo ha_category ha_release ha_codeowners
러시아 교통정보(Yandex Transport)
Instructions on how to set up Yandex transport with Home Assistant.
yandex.png
Sensor
Transport
0.100
@rishatik92

The yandex_tranport sensor platform uses Yandex Maps it will give you the time until the next departure time from a bus/tramway/etc stop.

The Yandex Maps website can help to determine the id of your bus stop. You can select a bus stop by clicking on the map, and look to the URL:

https://yandex.ru/maps/213/moscow/?ll=37.722565%2C55.806662&masstransit%5BstopId%5D=stop__9642962&mode=masstransit&z=16.52

Where stop id is: 9642962

If you want to track only specific routes, you can add them in the routes section.

Configuration

To activate Yandex Transport, add the following lines to your configuration.yaml:

# Example configuration.yaml entry
sensor:
  - platform: yandex_transport
    stop_id: YOUR_STOP_ID

{% configuration %} stop_id: description: The ID of the transport stop to get the information for. required: true type: string routes: description: "A list of a specific bus, tramway, etc routes at the stop. This is the same as the bus number, e.g., 83. If the routes with letters contain Cyrillic symbols, so write them to configuration.yaml in Cyrillic." required: false type: list name: description: A friendly name for this sensor. required: false default: Yandex Transport type: string {% endconfiguration %}

Full configuration example

The configuration sample below shows how an entry can look like:

# Example configuration.yaml entry
sensor:
  - platform: yandex_transport
    name: Bus_to_subway
    stop_id: 9639579
    routes:
      - 63
      - 179
      - 179к
      - 154
      - 591
      - 677к

Options For Entities

You can configure view information about the next bus using Lovelace card. To enable displaying the relative time in your default_vew add the following lines:

# Example default_view entry
title: Home Assistant
views:
    cards:
      - entities:
          - entity: sensor.yandex_transport
            format: relative
        type: entities
    path: default_view

Data provided by https://maps.yandex.ru