Skip to content

Latest commit

 

History

History
 
 

Binary Search

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
 
 
 
 
 
 
 
 

Binary Search

Goal: Quickly find an element in an array.

Let's say you have an array of numbers and you want to determine whether a specific number is in that array, and if so, at which index.

In most cases, Swift's indexOf() function is good enough for that:

let numbers = [11, 59, 3, 2, 53, 17, 31, 7, 19, 67, 47, 13, 37, 61, 29, 43, 5, 41, 23]

numbers.indexOf(43)  // returns 15

The built-in indexOf() function performs a linear search. In code that looks something like this:

func linearSearch<T: Equatable>(_ a: [T], _ key: T) -> Int? {
    for i in 0 ..< a.count {
        if a[i] == key {
            return i
        }
    }
    return nil
}

And you'd use it like this:

linearSearch(numbers, 43)  // returns 15

So what's the problem? linearSearch() loops through the entire array from the beginning, until it finds the element you're looking for. In the worst case, the value isn't even in the array and all that work is done for nothing.

On average, the linear search algorithm needs to look at half the values in the array. If your array is large enough, this starts to become very slow!

Divide and conquer

The classic way to speed this up is to use a binary search. The trick is to keep splitting the array in half until the value is found.

For an array of size n, the performance is not O(n) as with linear search but only O(log n). To put that in perspective, binary search on an array with 1,000,000 elements only takes about 20 steps to find what you're looking for, because log_2(1,000,000) = 19.9. And for an array with a billion elements it only takes 30 steps. (Then again, when was the last time you used an array with a billion items?)

Sounds great, but there is a downside to using binary search: the array must be sorted. In practice, this usually isn't a problem.

Here's how binary search works:

  • Split the array in half and determine whether the thing you're looking for, known as the search key, is in the left half or in the right half.
  • How do you determine in which half the search key is? This is why you sorted the array first, so you can do a simple < or > comparison.
  • If the search key is in the left half, you repeat the process there: split the left half into two even smaller pieces and look in which piece the search key must lie. (Likewise for when it's the right half.)
  • This repeats until the search key is found. If the array cannot be split up any further, you must regrettably conclude that the search key is not present in the array.

Now you know why it's called a "binary" search: in every step it splits the array into two halves. This process of divide-and-conquer is what allows it to quickly narrow down where the search key must be.

The code

Here is a recursive implementation of binary search in Swift:

func binarySearch<T: Comparable>(_ a: [T], key: T, range: Range<Int>) -> Int? {
    if range.lowerBound >= range.upperBound {
        // If we get here, then the search key is not present in the array.
        return nil

    } else {
        // Calculate where to split the array.
        let midIndex = range.lowerBound + (range.upperBound - range.lowerBound) / 2

        // Is the search key in the left half?
        if a[midIndex] > key {
            return binarySearch(a, key: key, range: range.lowerBound ..< midIndex)

        // Is the search key in the right half?
        } else if a[midIndex] < key {
            return binarySearch(a, key: key, range: midIndex + 1 ..< range.upperBound)

        // If we get here, then we've found the search key!
        } else {
            return midIndex
        }
    }
}

To try this out, copy the code to a playground and do:

let numbers = [2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67]

binarySearch(numbers, key: 43, range: 0 ..< numbers.count)  // gives 13

Note that the numbers array is sorted. The binary search algorithm does not work otherwise!

I said that binary search works by splitting the array in half, but we don't actually create two new arrays. Instead, we keep track of these splits using a Swift Range object. Initially, this range covers the entire array, 0 ..< numbers.count. As we split the array, the range becomes smaller and smaller.

Note: One thing to be aware of is that range.upperBound always points one beyond the last element. In the example, the range is 0..<19 because there are 19 numbers in the array, and so range.lowerBound = 0 and range.upperBound = 19. But in our array the last element is at index 18, not 19, since we start counting from 0. Just keep this in mind when working with ranges: the upperBound is always one more than the index of the last element.

Stepping through the example

It might be useful to look at how the algorithm works in detail.

The array from the above example consists of 19 numbers and looks like this when sorted:

[ 2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67 ]

We're trying to determine if the number 43 is in this array.

To split the array in half, we need to know the index of the object in the middle. That's determined by this line:

let midIndex = range.lowerBound + (range.upperBound - range.lowerBound) / 2

Initially, the range has lowerBound = 0 and upperBound = 19. Filling in these values, we find that midIndex is 0 + (19 - 0)/2 = 19/2 = 9. It's actually 9.5 but because we're using integers, the answer is rounded down.

In the next figure, the * shows the middle item. As you can see, the number of items on each side is the same, so we're split right down the middle.

[ 2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67 ]
                                  *

Now binary search will determine which half to use. The relevant section from the code is:

if a[midIndex] > key {
    // use left half
} else if a[midIndex] < key {
    // use right half
} else {
    return midIndex
}

In this case, a[midIndex] = 29. That's less than the search key, so we can safely conclude that the search key will never be in the left half of the array. After all, the left half only contains numbers smaller than 29. Hence, the search key must be in the right half somewhere (or not in the array at all).

Now we can simply repeat the binary search, but on the array interval from midIndex + 1 to range.upperBound:

[ x, x, x, x, x, x, x, x, x, x | 31, 37, 41, 43, 47, 53, 59, 61, 67 ]

Since we no longer need to concern ourselves with the left half of the array, I've marked that with x's. From now on we'll only look at the right half, which starts at array index 10.

We calculate the index of the new middle element: midIndex = 10 + (19 - 10)/2 = 14, and split the array down the middle again.

[ x, x, x, x, x, x, x, x, x, x | 31, 37, 41, 43, 47, 53, 59, 61, 67 ]
                                                 *

As you can see, a[14] is indeed the middle element of the array's right half.

Is the search key greater or smaller than a[14]? It's smaller because 43 < 47. This time we're taking the left half and ignore the larger numbers on the right:

[ x, x, x, x, x, x, x, x, x, x | 31, 37, 41, 43 | x, x, x, x, x ]

The new midIndex is here:

[ x, x, x, x, x, x, x, x, x, x | 31, 37, 41, 43 | x, x, x, x, x ]
                                     *

The search key is greater than 37, so continue with the right side:

[ x, x, x, x, x, x, x, x, x, x | x, x | 41, 43 | x, x, x, x, x ]
                                        *

Again, the search key is greater, so split once more and take the right side:

[ x, x, x, x, x, x, x, x, x, x | x, x | x | 43 | x, x, x, x, x ]
                                            *

And now we're done. The search key equals the array element we're looking at, so we've finally found what we were searching for: number 43 is at array index 13. w00t!

It may have seemed like a lot of work, but in reality it only took four steps to find the search key in the array, which sounds about right because log_2(19) = 4.23. With a linear search, it would have taken 14 steps.

What would happen if we were to search for 42 instead of 43? In that case, we can't split up the array any further. The range.upperBound becomes smaller than range.lowerBound. That tells the algorithm the search key is not in the array and it returns nil.

Note: Many implementations of binary search calculate midIndex = (lowerBound + upperBound) / 2. This contains a subtle bug that only appears with very large arrays, because lowerBound + upperBound may overflow the maximum number an integer can hold. This situation is unlikely to happen on a 64-bit CPU, but it definitely can on 32-bit machines.

Iterative vs recursive

Binary search is recursive in nature because you apply the same logic over and over again to smaller and smaller subarrays. However, that does not mean you must implement binarySearch() as a recursive function. It's often more efficient to convert a recursive algorithm into an iterative version, using a simple loop instead of lots of recursive function calls.

Here is an iterative implementation of binary search in Swift:

func binarySearch<T: Comparable>(_ a: [T], key: T) -> Int? {
    var lowerBound = 0
    var upperBound = a.count
    while lowerBound < upperBound {
        let midIndex = lowerBound + (upperBound - lowerBound) / 2
        if a[midIndex] == key {
            return midIndex
        } else if a[midIndex] < key {
            lowerBound = midIndex + 1
        } else {
            upperBound = midIndex
        }
    }
    return nil
}

As you can see, the code is very similar to the recursive version. The main difference is in the use of the while loop.

Use it like this:

let numbers = [2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67]

binarySearch(numbers, key: 43)  // gives 13

The end

Is it a problem that the array must be sorted first? It depends. Keep in mind that sorting takes time -- the combination of binary search plus sorting may be slower than doing a simple linear search. Binary search shines in situations where you sort just once and then do many searches.

See also Wikipedia.

Written for Swift Algorithm Club by Matthijs Hollemans