Skip to content

Latest commit

 

History

History
121 lines (85 loc) · 5.01 KB

INSTALLATION_WINDOWS.md

File metadata and controls

121 lines (85 loc) · 5.01 KB
Raw

Installation using a Windows PC

This document explains how to install all the necessary files on the Tang Nano 20K and the M0S Dock in order to use it as a MiSTeryNano device.

This has been tested on Windows 11. It should work on older versions too.

Software needed:

In order to use the SD card for disks and harddisk:

  • Atari floppy disk images in .ST format
  • An Atari harddisk file

Flashing the Tang Nano 20k

First download the Gowin IDE. The Education version is sufficient and won't need a licence.

Install the IDE on your system (follow the installation instructions from Gowin). After the Installation you should have it as an shortcut on your desktop or in your start menu.

  • Press the S2 button on the Tang Nano 20K and keep it pressed
  • Connect the Tang Nano 20k to the USB on your computer. You should hear the connecting sound of Windows.
  • Release the S2 button
  • Start Gowin. You should see the following screen

Explanation: The MiSTerNano core makes use of the flash memory of the Tang Nano 20k to store TOS ROMs. This may interfere with the FPGA flash process. Pressing the S2 during power up will prevent the Tang Nano 20k from booting into the MiSTeryNano core and will make sure the flash ROM can be updated.

Now press on the “programmer” marked red on the picture above. You should see following screen:

  • Press save on the dialog
  • From there you can add a device for programming by pressing on the little icon with the green plus
  • At least three files have to be flashed:
    • The core itself: atarist.fs
    • Two TOS ROMs
  • Than you can choose from the drop downs the parameter you see on the pictures.

Important:

  • atarist.fs is written to address 0x000000
  • ST TOS (e.g. TOS 1.04) is written to address 0x100000
  • STE TOS (e.g. TOS 1.62) is written to address 0x140000

Optionally two additional TOS ROMs may be flashed to the alternate addresses:

  • A secondary ST TOS (e.g. TOS 2.06) is written to address 0x180000
  • A secondary STE TOS (e.g. TOS 2.06) is written to address 0x1C0000

These secondary TOS' can later be selected from the on-screen-display (OSD). Their use and installation is optional.

  • For the FS file please choose the atarist.fs you just downloaded
  • For the TOS files you have to rename the downloaded TOS roms to tosxxx.bin
  • User Code and IDCODE can be ignored
  • Mark each of your configs and press the little icon with the green play button. You should see a progress bar and then:

That´s it for the Tang Nano 20

Flashing the M0S-Dock/BL616

For the BL616 you have to extract and start the BuffaloLabDevCube.

Using the internal BL616 of the Tang Nano 20k is currently not supported and a M0S Dock is mandatory. It needs to be flashed as follows:

  • Press the BOOT button on your M0S Dock before you plug the USB connection on your PC. You should hear the hardware detecting sound.
  • Start the BuffaloLabDevCube from the directory where you decompressed it. It will ask you what chip should be used. Select BL616/BL618 and press “finish”

Important: The path where you downloaded the firmware on your PC must not contain spaces like "C:\Atari ST". It e.g. needs to be renamed to "C:\AtariST" or otherwise flashing will fail.

  • You'll now see the program screen. On the right it should auto detect your device with a COM port. If not take a look in the device manager to check for the correct device detection.
  • On the top click on MCU and browse to the firmware image file named misterynano_fw_bl616.bin
  • Choose “Open Uart” and than press “Create & Download”. The firmware should now be flashed

Prepare the SD card

Format the SD card in FAT32. Copy your ST files and hard disk files on it. You can organize your files in subdirectories. These files can later be selected using the MiSTerNano on-screen-display (OSD).

That´s it for now. Have fun using the MiSTery Nano