mesong12_odroid_common.dtsi

/*
 * arch/arm64/boot/dts/amlogic/mesong12_odroid_common.dtsi
 *
 * Copyright (C) 2018 Hardkernel Co,. Ltd. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 */

/{
	aliases {
		serial0 = &uart_AO;
		serial1 = &uart_A;
		serial2 = &uart_B;
		serial3 = &uart_C;
		serial4 = &uart_AO_B;
		i2c0 = &i2c0;
		i2c1 = &i2c1;
		i2c2 = &i2c2;
		i2c3 = &i2c3;
		i2c4 = &i2c_AO;
		tsensor0 = &p_tsensor;
		tsensor1 = &d_tsensor;
	};

	gpiomem {
		compatible = "amlogic, gpiomem";
		reg = <0x0 0xff634000 0x0 0x1000>;
		status = "okay";
	};

	codec_mm {
		compatible = "amlogic, codec, mm";
		memory-region = <&codec_mm_cma &codec_mm_reserved>;
		dev_name = "codec_mm";
		status = "okay";
	};

	ppmgr {
		compatible = "amlogic, ppmgr";
		memory-region = <&ppmgr_reserved>;
		dev_name = "ppmgr";
		status = "okay";
	};

	ionvideo {
		compatible = "amlogic, ionvideo";
		dev_name = "ionvideo";
		status = "okay";
	};

	/* Audio Related start */
	dummy_codec:dummy{
		#sound-dai-cells = <0>;
		compatible = "amlogic, aml_dummy_codec";
		status = "okay";
	};
	amlogic_codec:t9015{
		#sound-dai-cells = <0>;
		compatible = "amlogic, aml_codec_T9015";
		reg = <0x0 0xFF632000 0x0 0x2000>;
		is_auge_used = <1>; /* meson or auge chipset used */
		tdmout_index = <2>;
		status = "okay";
	};
	audio_effect:eqdrc{
		/*eq_enable = <1>;*/
		/*drc_enable = <1>;*/
		/*
		 * 0:tdmout_a
		 * 1:tdmout_b
		 * 2:tdmout_c
		 * 3:spdifout
		 * 4:spdifout_b
		 */
		eqdrc_module = <1>;
		/* max 0xf, each bit for one lane, usually one lane */
		lane_mask = <0x1>;
		/* max 0xff, each bit for one channel */
		channel_mask = <0x3>;
	};
	auge_sound {
		compatible = "amlogic, g12a-sound-card";
		aml-audio-card,name = "AML-AUGESOUND";
		/*avout mute gpio*/
		avout_mute-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
		/*for audio effect ,eqdrc */
		aml-audio-card,effect = <&audio_effect>;

		aml-audio-card,dai-link@0 {
			format = "i2s";// "dsp_a";
			mclk-fs = <256>;
			bitclock-master = <&aml_tdmc>;
			frame-master = <&aml_tdmc>;
			/* suffix-name, sync with android audio hal
			 * what's the dai link used for
			 */
			suffix-name = "alsaPORT-i2s";
			cpu {
				sound-dai = <&aml_tdmc>;
				dai-tdm-slot-tx-mask = <1 1>;
				dai-tdm-slot-rx-mask = <1 1>;
				dai-tdm-slot-num = <2>;
				dai-tdm-slot-width = <32>;
				system-clock-frequency = <12288000>;
			};
			codec {
				sound-dai = <&amlogic_codec>;
			};
		};

		/* spdif_b to hdmi, only playback */
		aml-audio-card,dai-link@1 {
			mclk-fs = <128>;
			continuous-clock;
			/* suffix-name, sync with android audio hal
			 * what's the dai link used for
			 */
			suffix-name = "alsaPORT-spdifb2hdmi";
			cpu {
				sound-dai = <&aml_spdif_b>;
				system-clock-frequency = <6144000>;
			};
			codec {
				sound-dai = <&dummy_codec>;
			};
		};

		/* spdif_out GPIOA_11 */
		aml-audio-card,dai-link@2 {
			mclk-fs = <128>;
			/* suffix-name, sync with android audio hal
			 * what's the dai link used for
			 */
			suffix-name = "alsaPORT-spdif";
			cpu {
				sound-dai = <&aml_spdif>;
				system-clock-frequency = <6144000>;
			};
			codec {
				sound-dai = <&dummy_codec>;
			};
		};
	};
	audiolocker: locker {
		compatible = "amlogic, audiolocker";
		clocks = <&clkaudio CLKID_AUDIO_LOCKER_OUT
				&clkaudio CLKID_AUDIO_LOCKER_IN
				&clkaudio CLKID_AUDIO_MCLK_D
				&clkaudio CLKID_AUDIO_MCLK_E
				&clkc CLKID_MPLL1
				&clkc CLKID_MPLL2>;
		clock-names = "lock_out", "lock_in", "out_src",
					"in_src", "out_calc", "in_ref";
		interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
		interrupt-names = "irq";
		frequency = <49000000>; /* pll */
		dividor = <49>; /* locker's parent */
		status = "okay";
	};
	/* Audio Related end */

	leds {
		compatible = "gpio-leds";
		blueled {
			label = "blue:heartbeat";
			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
		};
	};

	gpio-reset {
		compatible = "linux,gpio-reset";
		usb_hub_en {
			gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
			asserted-state = <0>;
			duration-ms = <100>;
			auto;
		};
		usb_hub {
			gpios = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
			asserted-state = <0>;
			duration-ms = <100>;
			auto;
		};
	};

	efuse: efuse{
		compatible = "amlogic, efuse";
		read_cmd = <0x82000030>;
		write_cmd = <0x82000031>;
		get_max_cmd = <0x82000033>;
		key = <&efusekey>;
		status = "okay";
	};

	efusekey:efusekey{
		keynum = <4>;
		key0 = <&key_0>;
		key1 = <&key_1>;
		key2 = <&key_2>;
		key3 = <&key_3>;
		key_0:key_0{
			keyname = "mac";
			offset = <0>;
			size = <6>;
		};
		key_1:key_1{
			keyname = "mac_bt";
			offset = <6>;
			size = <6>;
		};
		key_2:key_2{
			keyname = "mac_wifi";
			offset = <12>;
			size = <6>;
		};
		key_3:key_3{
			keyname = "usid";
			offset = <18>;
			size = <16>;
		};
	};//End efusekey
};

&ethmac {
	status = "okay";
	pinctrl-names = "external_eth_pins";
	pinctrl-0 = <&external_eth_pins>;
	mc_val = <0x1621>;

	internal_phy=<0>;

	/* reset */
	rst_pin-gpios = <&gpio GPIOZ_15 GPIO_ACTIVE_LOW>;
};

/*if you want to use vdin just modify status to "ok"*/
&vdin0 {
	memory-region = <&vdin0_cma_reserved>;
	status = "okay";
	/*vdin write mem color depth support:
	 *bit0:support 8bit
	 *bit1:support 9bit
	 *bit2:support 10bit
	 *bit3:support 12bit
	 *bit4:support yuv422 10bit full pack mode (from txl new add)
	 */
	tv_bit_mode = <0x15>;
};

&vdin1 {
	memory-region = <&vdin1_cma_reserved>;
	status = "okay";
	/*vdin write mem color depth support:
	 *bit0:support 8bit
	 *bit1:support 9bit
	 *bit2:support 10bit
	 *bit3:support 12bit
	 */
	tv_bit_mode = <1>;
};

&pwm_ef {
	status = "okay";
};

&pwm_AO_cd {
	status = "okay";
};

&i2c3 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_master_pins2>;
	clock-frequency = <100000>;		/* default 100k */

	pcf8563: rtc@51 {
		compatible = "nxp,pcf8563";
		reg = <0x51>;
	};
};

&usb2_phy_v2 {
	status = "okay";
	portnum = <2>;
};

&usb3_phy_v2 {
	status = "okay";
	portnum = <1>;
	otg = <1>;
	gpio-vbus-power = "GPIOH_6";
	gpios = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
};

&dwc3 {
	status = "okay";
};

&dwc2_a {
	status = "okay";
	/** 0: normal, 1: otg+dwc3 host only, 2: otg+dwc3 device only*/
	controller-type = <3>;
};

&pcie_A {
	reset-gpio = <&gpio GPIOX_7 GPIO_ACTIVE_HIGH>;
	status = "disable";
};

&sd_emmc_c {
	status = "okay";
	emmc {
		caps = "MMC_CAP_8_BIT_DATA",
			 "MMC_CAP_MMC_HIGHSPEED",
			 "MMC_CAP_SD_HIGHSPEED",
			 "MMC_CAP_NONREMOVABLE",
			/* "MMC_CAP_1_8V_DDR", */
			 "MMC_CAP_HW_RESET",
			 "MMC_CAP_ERASE",
			 "MMC_CAP_CMD23";
		caps2 = "MMC_CAP2_HS200";
		/* "MMC_CAP2_HS400";*/
		f_min = <400000>;
		f_max = <200000000>;
	};
};

&audiobus {
	/* tdmc to internal DAC output, no pinmux */
	aml_tdmc: tdmc {
		compatible = "amlogic, g12a-snd-tdmc";
		#sound-dai-cells = <0>;
		dai-tdm-lane-slot-mask-in = <0 1 0 0>;
		dai-tdm-lane-slot-mask-out = <1 0 0 0>;
		dai-tdm-clk-sel = <2>;
		clocks = <&clkaudio CLKID_AUDIO_MCLK_C
				&clkc CLKID_MPLL2>;
		clock-names = "mclk", "clk_srcpll";
		i2s2hdmi = <0>;
		status = "okay";
	};

	aml_spdif: spdif {
		compatible = "amlogic, g12a-snd-spdif-a";
		#sound-dai-cells = <0>;
		clocks = <&clkc CLKID_MPLL0
				&clkc CLKID_FCLK_DIV4
				&clkaudio CLKID_AUDIO_SPDIFIN
				&clkaudio CLKID_AUDIO_SPDIFOUT
				&clkaudio CLKID_AUDIO_SPDIFIN_CTRL
				&clkaudio CLKID_AUDIO_SPDIFOUT_CTRL>;
		clock-names = "sysclk", "fixed_clk", "gate_spdifin",
				"gate_spdifout", "clk_spdifin", "clk_spdifout";
		interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
		interrupt-names = "irq_spdifin";
		pinctrl-names = "spdif_pins";
		pinctrl-0 = <&spdifout>;
		status = "okay";
	};
	aml_spdif_b: spdif_b {
		compatible = "amlogic, g12a-snd-spdif-b";
		#sound-dai-cells = <0>;
		clocks = <&clkc CLKID_MPLL0 /*CLKID_HIFI_PLL*/
				&clkaudio CLKID_AUDIO_SPDIFOUTB
				&clkaudio CLKID_AUDIO_SPDIFOUTB_CTRL>;
		clock-names = "sysclk",
				"gate_spdifout", "clk_spdifout";
		status = "okay";
	};
	aml_loopback: loopback {
		compatible = "amlogic, snd-loopback";
		/*
		 * 0: out rate = in data rate;
		 * 1: out rate = loopback data rate;
		 */
		lb_mode = <0>;

		/* datain src
		 * 0: tdmin_a;
		 * 1: tdmin_b;
		 * 2: tdmin_c;
		 * 3: spdifin;
		 * 4: pdmin;
		 */
		datain_src = <4>;
		datain_chnum = <8>;
		datain_chmask = <0x3f>;

		/* tdmin_lb src
		 * 0: tdmoutA
		 * 1: tdmoutB
		 * 2: tdmoutC
		 * 3: PAD_tdminA
		 * 4: PAD_tdminB
		 * 5: PAD_tdminC
		 */
		datalb_src = <2>;
		datalb_chnum = <8>;
		datalb_chmask = <0x3>;

		status = "disabled";
	};

	audioresample: resample {
		compatible = "amlogic, g12a-resample";
		clocks = <&clkc CLKID_MPLL3
				&clkaudio CLKID_AUDIO_MCLK_F
				&clkaudio CLKID_AUDIO_RESAMPLE_CTRL>;
		clock-names = "resample_pll", "resample_src", "resample_clk";
		/*same with toddr_src
		 *	TDMIN_A, 0
		 *	TDMIN_B, 1
		 *	TDMIN_C, 2
		 *	SPDIFIN, 3
		 *	PDMIN,  4
		 *	NONE,
		 *	TDMIN_LB, 6
		 *	LOOPBACK, 7
		 */
		resample_module = <4>;
		status = "disabled";
	};
	aml_pwrdet: pwrdet {
		compatible = "amlogic, g12a-power-detect";

		interrupts = <GIC_SPI 155 IRQ_TYPE_EDGE_RISING>;
		interrupt-names = "pwrdet_irq";

		/* pwrdet source sel
		 * 7: loopback;
		 * 6: tdmin_lb;
		 * 5: reserved;
		 * 4: pdmin;
		 * 3: spdifin;
		 * 2: tdmin_c;
		 * 1: tdmin_b;
		 * 0: tdmin_a;
		 */
		pwrdet_src = <4>;

		hi_th = <0x70000>;
		lo_th = <0x16000>;

		status = "disabled";
	};
}; /* end of audiobus */

&audio_data {
	status = "okay";
};

&pinctrl_periphs {
	i2c3_master_pins2:i2c3_pins2 {
		mux {
			drive-strength = <3>;
		};
	};
	spdifout: spdifout {
		mux {/* GPIOA_11 */
			groups = "spdif_out_a11";
			function = "spdif_out";
		};
	};
}; /* end of pinctrl_periphs */