Skip to content

Latest commit

 

History

History
182 lines (134 loc) · 7.15 KB

DOCS.md

File metadata and controls

182 lines (134 loc) · 7.15 KB
Raw

Home Assistant Community Add-on: Z-Wave JS UI

The Z-Wave JS UI add-on provides an additional control panel, allowing you to configure every aspect of your Z-Wave network. It provides a decoupled gateway which can communicate using Z-Wave JS WebSockets (used by the Home Assistant Z-Wave JS integration) and MQTT (even simultaneously).

Some advantages and use-cases:

  • Compatible with the Home Assistant Z-Wave JS integration.
  • Your Z-Wave network will keep running between Home Assistant restarts.
  • You can directly use things like Node-RED with your Z-Wave network, while it is available for Home Assistant at the same time.
  • Allow ESPHome.io based ESP devices to directly respond or work with your Z-Wave network.
  • Pre-configures itself with the Mosquitto add-on when found.

This add-on uses the Z-Wave JS UI software.

Installation

The installation of this add-on is pretty straightforward and not different in comparison to installing any other Home Assistant add-on.

  1. Click the Home Assistant My button below to open the add-on on your Home Assistant instance.

    Open this add-on in your Home Assistant instance.

  2. Click the "Install" button to install the add-on.

  3. Check the logs of the "Z-Wave JS UI" add-on to see if everything went well.

  4. Click the "OPEN WEB UI" button.

  5. Enjoy the add-on!

NOTE: The upstream project has documentation on using the software itself: https://zwave-js.github.io/zwave-js-ui/#/

Setting up the Home Assistant Z-Wave JS integration

By default the Home Assistant Z-Wave JS integration will try to set up the official "Z-Wave JS" add-on from the official add-on store.

However, this add-on will provide an add-on UI and has the ability to send/receive data over MQTT as well. So, if that is your thing, this add-on might be for you.

After starting the add-on successfully, it is time to hook it up with Home Assistant.

To do this:

  1. Open the Z-Wave JS UI control panel by clicking the "OPEN WEB UI" button on the add-on page in the Supervisor.
  2. In the control panel, go to "Settings" in the menu and click on the "Zwave" bar that shows up on the right.
  3. Enter the following information:
    • Serial Port (e.g., /dev/serial/by-id/usb-0658_0200_if00)
    • Network Key (e.g., 2232666D100F795E5BB17F0A1BB7A146)

Now click the "SAVE" button and navigate to the "Control Panel" in the menu. If you had devices paired already, you should see the showing up slowly.

Now it is time to set up Home Assistant:

  1. Go to the Settings panel and click "Devices & Services".
  2. In the bottom right, click "+ Add Integration".
  3. Select the "Z-Wave" integration from the list.
  4. A dialog box will show, asking to use the add-on:
    • UNCHECK that box, it will install the official add-on.
    • Again, the official add-on is recommended, so...
  5. In the next dialog it will ask for the server. Enter: ws://a0d7b954-zwavejs2mqtt:3000
  6. Confirm and done!

Configuration

Note: Remember to restart the add-on when the configuration is changed.

Example add-on configuration:

log_level: info

Option: log_level

The log_level option controls the level of log output by the addon and can be changed to be more or less verbose, which might be useful when you are dealing with an unknown issue. Possible values are:

  • trace: Show every detail, like all called internal functions.
  • debug: Shows detailed debug information.
  • info: Normal (usually) interesting events.
  • warning: Exceptional occurrences that are not errors.
  • error: Runtime errors that do not require immediate action.
  • fatal: Something went terribly wrong. Add-on becomes unusable.

Please note that each level automatically includes log messages from a more severe level, e.g., debug also shows info messages. By default, the log_level is set to info, which is the recommended setting unless you are troubleshooting.

Known issues and limitations

  • Z-Wave JS UI supports Home Assistant Discovery over MQTT. It is STRONGLY recommended NOT to use that option. Use the Z-Wave JS integration as documented above instead.

Changelog & Releases

This repository keeps a change log using GitHub's releases functionality.

Releases are based on Semantic Versioning, and use the format of MAJOR.MINOR.PATCH. In a nutshell, the version will be incremented based on the following:

  • MAJOR: Incompatible or major changes.
  • MINOR: Backwards-compatible new features and enhancements.
  • PATCH: Backwards-compatible bugfixes and package updates.

Support

Got questions?

You have several options to get them answered:

You could also open an issue here GitHub.

Authors & contributors

The original setup of this repository is by Franck Nijhof.

For a full list of all authors and contributors, check the contributor's page.

License

MIT License

Copyright (c) 2021 - 2022 Franck Nijhof

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.