GPIO.Rotary.ucf

## =============================================================================================================================================================
## General Purpose I/O
## =============================================================================================================================================================
##
## Rotary-Button
## -----------------------------------------------------------------------------
#$	##	Bank:						13
#$	##		VCCO:					1,8V (VCC1V8_FPGA)
##	Location:				SW8
## -----------------------------------------------------------------------------
#$	NET "KC705_GPIO_Rotary_Button"					LOC = "AW31";			## {IN}		SW10.5; high-active; external 4k7 pulldown resistor
#$	NET "KC705_GPIO_Rotary_IncA"						LOC = "AR33";			## {IN}		SW10.1; high-active; external 4k7 pulldown resistor
#$	NET "KC705_GPIO_Rotary_IncB"						LOC = "AT31";			## {IN}		SW10.6; high-active; external 4k7 pulldown resistor
NET "KC705_GPIO_Rotary_*"									IOSTANDARD = LVCMOS18;

# Ignore timings on async I/O pins
NET "KC705_GPIO_Rotary_*"									TIG;