Functional Programming is not just programming with the keyword function. Oh if only it was that easy, I could end the book right here! But importantly, the function really is at the center of FP. And it's how we use functions that makes our code functional.
But, how sure are you that you know what function means?
In this chapter, we're going to lay the groundwork for the rest of the book by covering all aspects of functions. Brace yourself, because there's a lot more to the function than you may have realized.
The most natural place I can think of to start tackling functional programming is with the function. That may seem too simplistic and too obvious, but I think our journey needs a solid first step.
So... what is a function?
I know I've promised we'd stay away from math as much as possible, but bear with me for a moment as we quickly observe some fundamental things about functions and graphs from algebra before we move on.
Do you remember learning anything about f(x) back in school? What about the equation y = f(x)?
Let's say an equation is defined like this: f(x) = 2x^2 + 3. What does that mean? What does it mean to graph that equation? Here's the graph:
What you can notice is that for any value of x, say 2, if you plug it into the equation, you get 11. What is 11, though? It's the return value of the f(x) function, which earlier we said represents a y value.
In other words, there's a point at (2,11) on that curve in the graph. And for every value of x we plug in, we get another y value that pairs with it as a coordinate for a point. Another is (0,3), and another is (-1,5). Put all those points together, and you have the graph of that parabolic curve as shown above.
So what's any of this got to do with FP?
In math, a function always takes input(s), and always gives an output. Those inputs and outputs are often interpreted as parts of coordinates to be graphed.
In our programs, however, we can define functions with all sorts of input(s) and output(s), and they need not have any relationship to a curve on a graph.
So why all the talk of math and graphs? Because in a sense functional programming is about embracing using functions as functions in this mathematical sense.
You may be more accustomed to thinking of functions as procedures. What's the difference? An arbitrary collection of functionality. It may have inputs, it may not. It may have an output (return value), it may not.
A function takes input(s) and definitely always has a return value.
If you plan to want to do functional programming, you should be using functions as much as possible, and not procedures. All your functions should take input(s) and return output(s). Why? The answer to that will have many levels of meaning that we'll uncover throughout this book.
From this definition, all functions need input.
You sometimes hear people refer to them as "arguments" and sometimes as "parameters". So what's that all about?
Arguments are the values you pass in, and parameters are the named variables inside the function that receive those passed in values. Example:
function foo(x,y) {
// ..
}
var a = 3;
foo( a, a * 2 );a and a * 2 (actually, the result of that expression, 6) are the arguments to the foo(..) call. x and y are the parameters that receive the argument values (3 and 6, respectively).
Note: In JavaScript, there's no requirement that the number of arguments matches the number of parameters. If you pass more arguments than you have declared parameters to receive them, the values pass in just fine untouched. These values can be accessed in a few different ways, including the deprecated arguments object you may have heard of before. If you pass fewer arguments than the declared parameters, each unaccounted-for parameter is an "undefined" variable, meaning it's present and available in the scope of the function, but just starts out with the empty undefined value.
The number of arguments a function "expects" -- how many arguments you'll probably want to pass to it -- is determined by the number of parameters that are declared.
function foo(x,y,z) {
// ..
}foo(..) expects three arguments, because it has three declared parameters. This count has a special term: arity. Arity is the number of parameters in a function declaration. The arity of foo(..) is 3.
You may wish to inspect a function reference during the runtime of a program to determine its arity. This can be done with the length property of that function reference:
function foo(x,y,z) {
// ..
}
foo.length; // 3One reason for determining the arity during execution would be if a piece of code received a function reference from multiple sources, and sent different values depending on the arity of each.
For example, imagine a case where an fn function reference could expect one, two, or three arguments, but you always want to just pass a variable x in the last position:
// `fn` is set to some function reference
// `x` exists with some value
if (fn.length == 1) {
fn( x );
}
else if (fn.length == 2) {
fn( undefined, x );
}
else if (fn.length == 3) {
fn( undefined, undefined, x );
}Tip: The length property of a function is read-only and it's determined at the time you declare the function. It should be thought of as essentially a piece of metadata that describes something about the intended usage of the function.
One gotcha to be aware of is that certain kinds of parameter list variations can make the length property of the function report something different than you might expect. Don't worry, we'll explain each of these (ES6-introduced) features later in this chapter:
function foo(x,y = 2) {
// ..
}
function bar(x,...args) {
// ..
}
function baz( {a,b} ) {
// ..
}
foo.length; // 1
bar.length; // 1
baz.length; // 1If you use any of these forms of parameters, be aware that your function's length value may surprise you.
What about counting the number of arguments the current function call received? This used to be trivial, but now the situation is slightly more complicated. Each function has an arguments object (array-like) available that holds a reference to each of the arguments passed in. You can then inspect the length property of arguments to figure out how many were actually passed:
function foo(x,y,z) {
console.log( arguments.length ); // 2
}
foo( 3, 4 );As of ES5, arguments is deprecated. It'll almost certainly never be removed -- in JS we "never" break backwards-compatibility no matter how convenient that may be -- but it's strongly suggested for several reasons that you avoid using it whenever possible.
However, I suggest that arguments.length, and only that, is OK to keep using for those cases where you need to care about the passed number of arguments. A future version of JS might possibly add a feature that restores the ability to determine the number of arguments passed without arguments.length; if that happens, then we can fully drop usage of arguments.
Be careful: never access arguments positionally, like arguments[1]. Stick to arguments.length only, if you must.
Except... how will you access an argument that was passed in a position beyond the declared parameters? I'll answer that in a moment; but first, take a step back and ask yourself, "Why would I want to do that?". Seriously. Think about that closely for a minute.
It should be pretty rare that this occurs; it shouldn't be something you regularly expect or rely on when writing your functions. If you find yourself in such a scenario, spend an extra 20 minutes trying to design the interaction with that function in a different way. Name that extra argument even if it's exceptional.
A function signature that accepts an indeterminate amount of arguments is referred to as a variadic function. Some people prefer this style of function design, but I think you'll find that often the FPer wants to avoid these where possible.
OK, enough harping on that point.
Say you do need to access the arguments in a positional array-like way, possibly because you're accessing an argument that doesn't have a formal parameter at that position. How do we do it?
ES6 to the rescue! Let's declare our function with the ... operator -- variously referred to as "spread", "rest", or (my preference) "gather".
function foo(x,y,z,...args) {
// ..
}See the ...args in the parameter list? That's a new ES6 declarative form that tells the engine to collect (ahem, "gather") all remaining arguments (if any) not assigned to named parameters, and put them in a real array named args. args will always be an array, even if it's empty. But it will not include values that are assigned to the x, y, and z parameters, only anything else that's passed in beyond those first three values.
function foo(x,y,z,...args) {
console.log( x, y, z, args );
}
foo(); // undefined undefined undefined []
foo( 1, 2, 3 ); // 1 2 3 []
foo( 1, 2, 3, 4 ); // 1 2 3 [ 4 ]
foo( 1, 2, 3, 4, 5 ); // 1 2 3 [ 4, 5 ]So, if you really want to be design a function that can account for an arbitrary number of arguments to be passed in, use ...args (or whatever name you like) on the end. Now, you'll have a real, non-deprecated, non-yucky array to access those argument values from.
Just pay attention to the fact that the value 4 is at position 0 of that args, not position 3. And its length value won't include those three 1, 2, and 3 values. ...args gathers everything else, not including the x, y, and z.
You can even use the ... operator in the parameter list even if there's no other formal parameters declared:
function foo(...args) {
// ..
}Now args will be the full array of arguments, whatever they are, and you can use args.length to know exactly how many arguments have been passed in. And you're safe to use args[1] or args[317] if you so choose. Please don't pass in 318 arguments, though.
Speaking of ES6 goodies, there's a few other tricks you may want to know about with your function arguments and parameters. For more information beyond this brief overview, see Chapter 2 of my "You Don't Know JS: ES6 & Beyond" book.
What if you wanted to pass along an array of values as the arguments in your function call?
function foo(...args) {
console.log( args[3] );
}
var arr = [ 1, 2, 3, 4, 5 ];
foo( ...arr ); // 4Our new friend ... is used, but not just in the parameter list; it's also used in the argument list at the call-site. It has the opposite behavior in this context. In a parameter list, we said it gathered arguments together. In an argument list, it spreads them out. So the contents of arr are actually spread out as individual arguments to the foo(..) call. Do you see how that's different from just passing in a reference to the whole arr array?
By the way, multiple values and ... spreadings can be interleaved, as you see fit:
var arr = [ 2 ];
foo( 1, ...arr, 3, ...[4,5] ); // 4Think of ... in this symmetric sense: in a value-list position, it spreads. In an assignment position -- like a parameter list, because arguments get assigned to parameters -- it gathers.
Whichever behavior you invoke, ... makes working with arrays of arguments much easier. Gone are the days of slice(..), concat(..) and apply(..) to wrangle our argument value arrays.
As of ES6, parameters can have declared default values. In the case where the argument for that parameter is not passed, or it's passed as the value undefined, the default assignment expression takes over.
Consider:
function foo(x = 3) {
console.log( x );
}
foo(); // 3
foo( undefined ); // 3
foo( null ); // null
foo( 0 ); // 0Note: We won't cover it here in any more detail, but the default value expression is lazy, meaning it's not evaluated unless and until needed. Also, it can be any valid JS expression, even a function call. Many cool tricks are possible with this capability. For example, you could declare x = required() in your parameter list, and in the required() function simply throw "This argument is required." to make sure someone always calls your function with that argument/parameter specified.
Another ES6 trick we can use with our parameters is called "destructuring". We'll only glance briefly at it because this topic is much more complex than we have space to cover here. But again, refer to my "ES6 & Beyond" book for lots more info.
Remember our foo(..) from before that could receive as many as 318 arguments!?
function foo(...args) {
// ..
}
foo( ...[1,2,3] );What if we wanted to change that interaction so the caller of our function passes in an array of values instead of individual argument values? Just drop the two ... usages:
function foo(args) {
// ..
}
foo( [1,2,3] );Simple enough. But what if now we wanted to give a parameter name to each of the first two values in the passed in array? We aren't declaring individual parameters anymore, so it seems we lost that ability. Destructuring is the answer:
function foo( [x,y,...args] ) {
// ..
}
foo( [1,2,3] );Do you spot the [ .. ] brackets around the argument list now? That's array destructuring. Destructuring is a way to declaratively describe a pattern for the kind of structure (object, array, etc) that you expect to see, and how decomposition (assignment) of its individual parts should happen.
In this example, destructuring tells the engine that an array is expected in this assignment position (aka parameter). The pattern says to take the first value of that array and assign to a local parameter variable called x, the second to y, and whatever is left is gathered into args.
You could have done that same thing manually like this:
function foo(params) {
var x = params[0];
var y = params[1];
var args = params.slice( 2 );
// ..
}But now we start to uncover the first bits of a principle that we'll come back to many more times in this text: declarative code often communicates more cleanly than imperative code.
Declarative code, like destructuring in the earlier snippet, focuses on what the outcome of a piece of code should be. Imperative code, like the manual assignments just shown, focuses more on how to get the outcome. If you later read the code, you have to mentally execute it to understand the desired outcome. The outcome is coded there, but it's not as clear.
Wherever possible, and to whatever degrees our language and our libraries/frameworks will let us, we should be striving for declarative and self-explanatory code.
Just as we can destructure arrays, we can destructure object parameters:
function foo( {x,y} ) {
console.log( x, y );
}
foo( {
y: 3
} ); // undefined 3We pass in an object as the single argument, and it's destructured into two separate parameter variables x and y, which are assigned the values of those corresponding property names from the object passed in. It didn't matter that the x property wasn't on the object; it just ended up as a variable with undefined like you'd expect.
But the part of parameter object destructuring I want you to pay attention to is the object being passed into foo(..).
With a normal call-site like foo(undefined,3), position is used to map from argument to parameter; we put the 3 in the second position to get it assigned to a y parameter. But at this new kind of call-site where parameter destructuring is involved, a simple object-property indicates which parameter (y) the argument value 3 should be assigned to.
We didn't have to account for x in that call-site because in effect we didn't care about x. We just omitted it, instead of having to do something distracting like passing undefined as a positional placeholder.
Some languages have a direct feature for this behavior: named arguments. In other words, at the call-site, labeling an input value to indicate which parameter it maps to. JavaScript doesn't have named arguments, but parameter object destructuring is the next best thing.
The FP-related benefit of using an object destructuring to pass in potentially multiple arguments is that a function that only takes one parameter (the object) is much easier to compose with another function's single output. Much more on that later.
Recall that the term arity refers to how many parameters a function expects to receive. A function with arity of 1 is also referred to as a unary function. In FP, we'll want our functions to be unary whenever possible, and sometimes we'll even use a variety of functional tricks to transform a function of higher arity to a unary form.
Consider this function:
function foo(x,y) {
if (typeof x == "number" && typeof y == "number") {
return x * y;
}
else {
return x + y;
}
}Obviously, this contrived example is going to behave differently depending on what inputs you pass in.
For example:
foo( 3, 4 ); // 12
foo( "3", 4 ); // "34"One reason programmers define functions like this is because it can be more convenient to overload different behaviors into a single function. The most well-known example is the $(..) function provided by many major JS libraries like jQuery. The "dollar sign" function has about a dozen very different kinds of behaviors -- from DOM element lookup to DOM element creation to deferring a function until the DOMContentLoaded event -- depending on what arguments you pass to it.
The perceived advantage is learning a smaller API (just one $(..) function), but the obvious downside is in reading code and having to carefully inspect exactly what's being passed in to try to decipher what a call will do.
This technique of overloading a function with lots of behaviors based on its inputs is called ad hoc polymorphism.
Another manifestation of this design pattern is making a function that has different outputs (see the next section for more detail) under different scenarios.
Warning: Be very careful of the convenience temptation here. Just because you can design a function in this way, and even though there may be immediate perceived wins, the long-term costs of this design decision can be unpleasant.
In JavaScript, functions always return a value. These three functions all have identical return behavior:
function foo() {}
function bar() {
return;
}
function baz() {
return undefined;
}The undefined value is implicitly returned if you have no return or if you just have an empty return;.
But keeping as much with the spirit of FP function definition as possible -- using functions and not procedures -- our functions should always have outputs, which means they should explicitly return a value, and usually not undefined.
A return statement can only return a single value. So if your function needs to return multiple values, your only viable option is to collect them into a compound value like an array or an object:
function foo() {
var retValue1 = 11;
var retValue2 = 31;
return [ retValue1, retValue2 ];
}Just like destructuring lets us de-construct array/object values in parameters, we can also do so in regular assignments:
function foo() {
var retValue1 = 11;
var retValue2 = 31;
return [ retValue1, retValue2 ];
}
var [ x, y ] = foo();
console.log( x + y ); // 42Collecting multiple values into an array (or object) to return, and subsequently destructuring those values back into distinct assignments, is a way to transparently express multiple outputs for a function.
Tip: I'd be remiss if I didn't suggest you take a moment to consider if a function needing multiple outputs could be refactored to avoid that, perhaps separated into two or more smaller single-purpose functions? Sometimes that will be possible, sometimes not; but you should at least consider it.
The return statement doesn't just return a value from a function. It's also a flow control structure; it ends the execution of the function at that point. A function with multiple return statements thus has multiple possible exit points, meaning that it may be harder to read a function to understand its output behavior if there are many paths that output.
Consider:
function foo(x) {
if (x > 10) return x + 1;
var y = x / 2;
if (y > 3) {
if (x % 2 == 0) return x;
}
if (y > 1) return y;
return x;
}Pop quiz: without cheating and running this code in your browser, what does foo(2) return? What about foo(4)? And foo(8)? And foo(12)?
How confident are you in your answers? How much mental tax did you pay to get those answers? I got it wrong the first two times I tried to think it through, and I wrote it!
I think part of the readability problem here is that we're using return not just to return different values, but also as a flow control construct to quit a function's execution early in certain cases. There are obviously better ways to write that flow control (the if logic, etc), but I also think there are ways to make the output paths more obvious.
Note: The answers to the pop quiz are 2, 2, 8, and 13.
Consider this version of the code:
function foo(x) {
var retValue;
if (retValue == null && x > 10) {
retValue = x + 1;
}
var y = x / 2;
if (y > 3) {
if (retValue == null && x % 2 == 0) {
retValue = x;
}
}
if (retValue == null && y > 1) {
retValue = y;
}
if (retValue == null) {
retValue = x;
}
return retValue;
}This version is unquestionably more verbose. But I would argue it's slightly simpler logic to follow, because every branch where retValue can get set is guarded by the condition that checks if it's already been set.
Rather than returning from the function early, we used normal flow control (if logic) to determine the retValue's assignment. At the end, we simply return retValue.
I'm not unconditionally saying that you should always have a single return, or that you should never do early returns, but I do think you should be careful about the flow control part of return creating more implicitness in your function definitions. Try to figure out the most explicit way to express the logic; that will often be the best way.
One technique that you've probably used in most code you've written, and maybe didn't even think about it much, is to have a function output some or all of its values by simply changing variables outside itself.
Remember our y = f(x) = 2x^2 + 3 function from earlier in the chapter? We could have defined it like this in JS:
var y;
function foo(x) {
y = (2 * Math.pow( x, 2 )) + 3;
}
foo( 2 );
y; // 11I know this is a silly example; we could just as easily have returnd the value instead of setting it into y from within the function:
function foo(x) {
return (2 * Math.pow( x, 2 )) + 3;
}
var y = foo( 2 );
y; // 11Both functions accomplish the same task. Is there any reason we should pick one over the other? Yes, absolutely.
One way to explain the difference is that the return in the latter version signals an explicit output, whereas the y assignment in the former is an implicit output. You may already have some intuition that guides you in such cases; typically, developers prefer explicit patterns over implicit ones.
But changing a variable in an outer scope, as we did with the y assignment inside of foo(..), is just one way of achieving an implicit output. A more subtle example is making changes to non-local values via reference.
Consider:
function sum(list) {
var total = 0;
for (let i = 0; i < list.length; i++) {
if (!list[i]) list[i] = 0;
total = total + list[i];
}
return total;
}
var nums = [ 1, 3, 9, 27, , 84 ];
sum( nums ); // 124The most obvious output from this function is the sum 124, which we explicitly returned. But do you spot the other output? Try that code and then inspect the nums array. Now do you spot the difference?
Instead of an undefined empty slot value in position 4, now there's a 0. The harmless looking list[i] = 0 operation ended up affecting the array value on the outside, even though we operated on a local list parameter variable.
Why? Because list holds a reference-copy of the nums reference, not a value-copy of the [1,3,9,..] array value. Because JS uses references and reference-copies for arrays, objects, and functions, we can create an output from our function all too easily, even if by accident.
This implicit function output has a special name in the FP world: side effects. But a function that has no side effects also has a special name: pure function. We'll talk a lot more about these in a later chapter, but the punchline is that we'll want to prefer pure functions and avoid side effects if at all possible.
Functions can receive and return values of any type. A function that receives or returns one or more other function values has the special name: higher-order function.
Consider:
function forEach(list,fn) {
for (let i = 0; i < list.length; i++) {
fn( list[i] );
}
}
forEach( [1,2,3,4,5], function each(val){
console.log( val );
} );
// 1 2 3 4 5forEach(..) is a higher-order function because it receives a function as an argument.
A higher-order function can also output another function, like:
function foo() {
var fn = function inner(msg){
console.log( msg );
};
return fn;
}
var f = foo();
f( "Hello!" ); // Hello!return is not the only way to "output" another function:
function foo() {
var fn = function inner(msg){
console.log( msg );
};
bar( fn );
}
function bar(func) {
func( "Hello!" );
}
foo(); // Hello!Functions that treat other functions as values are higher-order functions by definition. FPers write these all the time!
One of the most powerful things in all of programming, and especially in FP, is how a function behaves when it's inside another function's scope. When the inner function makes reference to a variable from the outer function, this is called closure.
Defined pragmatically, closure is when a function remembers and accesses variables from outside of its own scope, even when that function is executed in a different scope.
Consider:
function foo(msg) {
var fn = function inner(){
console.log( msg );
};
return fn;
}
var helloFn = foo( "Hello!" );
helloFn(); // Hello!The msg parameter variable in the scope of foo(..) is referenced inside the inner function. When foo(..) is executed and the inner function is created, it captures the access to the msg variable, and retains that access even after being returnd.
Once we have helloFn, a reference to the inner function, foo(..) has finished and it would seem as if its scope should have gone away, meaning the msg variable would no longer exist. But that doesn't happen, because the inner function has a closure over msg that keeps it alive. The closed over msg variable survives for as long as the inner function (now referenced by helloFn in a different scope) stays around.
Let's look at a few more examples of closure in action:
function person(id) {
var randNumber = Math.random();
return function identify(){
console.log( "I am " + id + ": " + randNumber );
};
}
var fred = person( "Fred" );
var susan = person( "Susan" );
fred(); // I am Fred: 0.8331252801601532
susan(); // I am Susan: 0.3940753308893741The inner function identify() has closure over two variables, the parameter id and the inner variable randNumber.
The access that closure enables is not restricted to merely reading the variable's original value -- it's not just a snapshot but rather a live link. You can update the value, and that new current state remains remembered until the next access.
function runningCounter(start) {
var val = start;
return function current(increment = 1){
val = val + increment;
return val;
};
}
var score = runningCounter( 0 );
score(); // 1
score(); // 2
score( 13 ); // 15Warning: For reasons that we'll cover more later in the text, this example of using closure to remember a state that changes (val) is probably something you'll want to avoid where possible.
If you have an operation that needs two inputs, one of which you know now but the other will be specified later, you can use closure to remember the first input:
function makeAdder(x) {
return function sum(y){
return x + y;
};
}
// we already know `10` and `37` as first inputs, respectively
var addTo10 = makeAdder( 10 );
var addTo37 = makeAdder( 37 );
// later, we specify the second inputs
addTo10( 3 ); // 13
addTo10( 90 ); // 100
addTo37( 13 ); // 50Normally, a sum(..) function would take both an x and y input to add them together. But in this example we receive and remember (via closure) the x value(s) first, while the y value(s) are separately specified later.
Note: This technique of specifying inputs in successive function calls is very common in FP, and comes in two forms: partial application and currying. We'll dive into them more thoroughly later in the text.
Of course, since functions are just values in JS, we can remember function values via closure.
function formatter(formatFn) {
return function inner(str){
return formatFn( str );
};
}
var lower = formatter( function formatting(v){
return v.toLowerCase();
} );
var upperFirst = formatter( function formatting(v){
return v[0].toUpperCase() + v.substr( 1 ).toLowerCase();
} );
lower( "WOW" ); // wow
upperFirst( "hello" ); // HelloInstead of distributing/repeating the toUpperCase() and toLowerCase() logic all over our code, FP encourages us to create simple functions that encapsulate -- a fancy way of saying wrapping up -- that behavior.
Specifically, we create two simple unary functions lower(..) and upperFirst(..), because those functions will be much easier to wire up to work with other functions in the rest of our program.
Tip: Did you spot how upperFirst(..) could have used lower(..)?
We'll use closure heavily throughout the rest of the text. It may just be the most important foundational practice in all of FP, if not programming as a whole. Get really comfortable with it!
Before we move on from this primer on functions, let's take a moment to discuss their syntax.
More than many other parts of this text, the discussions in this section are mostly opinion and preference, whether you agree with the views presented here or take opposite ones. These ideas are highly subjective, though many people seem to feel rather absolutely about them. Ultimately, you decide.
Syntatically speaking, function declarations require the inclusion of a name:
function helloMyNameIs() {
// ..
}But function expressions can come in both named and anonymous forms:
foo( function namedFunctionExpr(){
// ..
} );
bar( function(){ // <-- look, no name!
// ..
} );What exactly do we mean by anonymous, by the way? Specifically, functions have a name property that holds the string value of the name the function was given syntactically, such as "helloMyNameIs" or "namedFunctionExpr". This name property is most notably used by the console/developer tools of your JS environment to list the function when it participates in a stack trace (usually from an exception).
Anonymous functions are generally displayed as (anonymous function).
If you've ever had to debug a JS program from nothing but a stack trace of an exception, you probably have felt the pain of seeing (anonymous function) appear line after line. This listing doesn't give a developer any clue whatsoever as to the path the exception came from. It's not doing the developer any favors.
If you name your function expressions, the name is always used. So if you use a good name like handleProfileClicks instead of foo, you'll get much more helpful stack traces.
As of ES6, anonymous function expressions can be aided by name inferencing. Consider:
var x = function(){};
x.name; // xIf the engine is able to guess what name you probably want the function to take, it will go ahead and do so.
But beware, not all syntactic forms benefit from name inferencing. Probably the most common place a function expression shows up is as an argument to a function call:
function foo(fn) {
console.log( fn.name );
}
var x = function(){};
foo( x ); // x
foo( function(){} ); //When the name can't be inferred from the immediate surrounding syntax, it remains an empty string. Such a function will be reported as (anonymous function) in a stack trace should one occur.
There are other benefits to a function being named besides the debugging question. First, the syntactic name (aka lexical name) is useful for internal self-reference. Self-reference is necessary for recursion (both sync and async) and also helpful with event handlers.
Consider these different scenarios:
// sync recursion:
function findPropIn(propName,obj) {
if (obj == null || typeof obj != "object") return;
if (propName in obj) {
return obj[propName];
}
else {
let props = Object.keys( obj );
for (let i = 0; i < props.length; i++) {
let ret = findPropIn( propName, obj[props[i]] );
if (ret !== undefined) {
return ret;
}
}
}
}// async recursion:
setTimeout( function waitForIt(){
// does `it` exist yet?
if (!o.it) {
// try again later
setTimeout( waitForIt, 100 );
}
}, 100 );// event handler unbinding
document.getElementById( "onceBtn" )
.addEventListener( "click", function handleClick(evt){
// unbind event
evt.target.removeEventListener( "click", handleClick, false );
// ..
}, false );In all these cases, the named function's name was a useful and reliable self-reference from inside itself.
Moreover, even in simple cases with one-liner functions, naming them tends to make code more self-explanatory and thus easier to read for those who haven't read it before:
people.map( function getPreferredName(person){
return person.nicknames[0] || person.firstName;
} )
// ..The function name getPreferredName(..) tells the reader something about what the mapping operation is intending to do that is not entirely obvious from just its code. This name label helps the code be more readable.
Another place where anonymous function expressions are common is with IIFEs (immediately invoked function expressions):
(function(){
// look, I'm an IIFE!
})();You virtually never see IIFEs using names for their function expressions, but they should. Why? For all the same reasons we just went over: stack trace debugging, reliable self-reference, and readability. If you can't come up with any other name for your IIFE, at least use the word IIFE:
(function IIFE(){
// You already knew I was an IIFE!
})();What I'm getting at is there's multiple reasons why named functions are always more preferable to anonymous functions. As a matter of fact, I'd go so far as to say that there's basically never a case where an anonymous function is more preferable. They just don't really have any advantage over their named counterparts.
It's incredibly easy to write anonymous functions, because it's one less name we have to devote our mental attention to figuring out.
I'll be honest; I'm as guilty of this as anyone. I don't like to struggle with naming. The first 3 or 4 names I come up with a function are usually bad. I have to revisit the naming over and over. I'd much rather just punt with a good ol' anonymous function expression.
But we're trading ease-of-writing for pain-of-reading. This is not a good trade off. Being lazy or uncreative enough to not want to figure out names for your functions is an all too common, but poor, excuse for using anonymous functions.
Name every single function. And if you sit there stumped, unable to come up with a good name for some function you've written, I'd strongly suggest you don't fully understand that function's purpose yet -- or it's just too broad or abstract. You need to go back and re-design the function until this is more clear. And by that point, a name will become more apparent.
I can testify from my own experience that in the struggle to name something well, I usually have come to understand it better and often even refactor its design for improved readability and maintability. This time investment is well worth it.
So far we've been using the full canonical syntax for functions. But you've no doubt also heard all the buzz around the new ES6 => arrow function syntax.
Compare:
people.map( function getPreferredName(person){
return person.nicknames[0] || person.firstName;
} )
// ..
people.map( person => person.nicknames[0] || person.firstName );Whoa.
The keyword function is gone, so is return, the ( ) parentheses, the { } curly braces, and the ; semicolon. For all that, we traded for a so-called fat arrow => symbol.
But there's another thing we omitted. Did you spot it? The getPreferredName function name.
That's right; => arrow functions are lexically anonymous; there's no way to syntatically provide it a name. Their names can be inferred like regular functions, but again, the most common case of function expression values as arguments won't get any assistance in that way.
If person.nicknames isn't defined for some reason, an exception will be thrown, meaning this (anonymous function) will be at the top of the stack trace. Ugh.
Honestly, the anonymity of => arrow functions is a => dagger to the heart, for me. I cannot abide by the loss of naming. It's harder to read, harder to debug, and impossible to self-reference.
But if that wasn't bad enough, the other slap in the face is that there's a whole bunch of subtle syntactic variations that you must wade through if you have different scenarios for your function definition. I'm not going to cover all of them in detail here, but briefly:
people.map( person => person.nicknames[0] || person.firstName );
// multiple parameters? need ( )
people.map( (person,idx) => person.nicknames[0] || person.firstName );
// parameter destructuring? need ( )
people.map( ({ person }) => person.nicknames[0] || person.firstName );
// parameter default? need ( )
people.map( (person = {}) => person.nicknames[0] || person.firstName );
// returning an object? need ( )
people.map( person =>
({ preferredName: person.nicknames[0] || person.firstName })
);The case for excitement over => in the FP world is primarily that it follows almost exactly from the mathematical notation for functions, especially around FP languages like Haskell. The shape of => arrow function syntax communicates mathematically.
Digging even further, I'd suggest that the argument in favor of => is that by using much lighter-weight syntax, we reduce the visual boundaries between functions which lets us use simple function expressions much like we'd use lazy expressions -- another favorite of the FPer.
I think most FPers are going to blink and wave off these concerns. They love anonymous functions and they love saving on syntax. But like I said before: you decide.
If you're not familiar with the this binding rules in JavaScript, I recommend you check out my "You Don't Know JS: this & Object Prototypes" book. For the purposes of this section, I'll assume you know how this gets determined for a function call (one of the four rules). But even if you're still fuzzy on this, the good news is we're going to conclude that you shouldn't be using this if you're trying to do FP.
JavaScript functions have a this keyword that's automatically bound per function call. The this keyword can be described in many different ways, but I prefer to say it provides an object context for the function to run against.
this is an implicit parameter input for your function.
Consider:
function sum() {
return this.x + this.y;
}
var context = {
x: 1,
y: 2
};
sum.call( context ); // 3
context.sum = sum;
context.sum(); // 3
var s = sum.bind( context );
s(); // 3Of course, if this can be input into a function implicitly, the same object context could be sent in as an explicit argument:
function sum(ctx) {
return ctx.x + ctx.y;
}
var context = {
x: 1,
y: 2
};
sum( context );Simpler. And this kind of code will be a lot easier to deal with in FP. It's much easier to wire multiple functions together, or use any of the other input wrangling techniques we will get into in the next chapter, when inputs are always explicit. Doing them with implicit inputs like this ranges from awkward to nearly-impossible depending on the scenario.
There are other tricks we can leverage in a this-based system, like for example prototype-delegation (also covered in detail in the "this & Object Prototypes" book):
var Auth = {
authorize() {
var credentials = this.username + ":" + this.password;
this.send( credentials, resp => {
if (resp.error) this.displayError( resp.error );
else this.displaySuccess();
} );
},
send(/* .. */) {
// ..
}
};
var Login = Object.assign( Object.create( Auth ), {
doLogin(user,pw) {
this.username = user;
this.password = pw;
this.authorize();
},
displayError(err) {
// ..
},
displaySuccess() {
// ..
}
} );
Login.doLogin( "fred", "123456" );In case you're having trouble parsing what this code does: we have two separate objects Login and Auth, where Login performs prototype-delegation to Auth. Through delegation and the implicit this context sharing, these two objects virtually compose during the this.authorize() function call, so that properties/methods on this are dynamically shared with the Auth.authorize(..) function.
This code doesn't fit with various principles of FP for a variety of reasons, but one of the obvious hitches is the implicit this sharing. We could be more explicit about it and keep code that was easier to push in the FP direction:
// ..
authorize(ctx) {
var credentials = ctx.username + ":" + ctx.password;
Auth.send( credentials, function onResp(resp){
if (resp.error) ctx.displayError( resp.error );
else ctx.displaySuccess();
} );
}
// ..
doLogin(user,pw) {
Auth.authorize( {
username: user,
password: pw
} );
}
// ..From my perspective, the problem is not with using objects to organize behavior. It's that we're trying to use implicit input instead of being explicit about it. When I'm wearing my FP hat, I want to leave this stuff on the shelf.
Functions are powerful.
But let's be clear what a function is. It's not just a collection of statements/operations. Specifically, a function needs one or more inputs (ideally, just one!) and an output.
Functions inside of functions can have closure over outer variables and remember them for later. This is one of the most important concepts in all of programming, and a fundamental foundation of FP.
Be careful of anonymous functions, especially => arrow functions. They're convenient to write, but they shift the cost from author to reader. The whole reason we're studying FP here is to write more readable code, so don't be so quick to jump on that bandwagon.
Don't use this-aware functions. Just don't.