2023.07.13

🚀 Features

• Feature: Turn off LED 1 if no inverters are enabled for polling

🐛 Fixes

• Fix: Allow sending of ChannelChangeCommand even if EnableCommands is disabled

🛠 Under the hood

• webapp: Update dependencies
• use FSPI for esp32-c3 and revise device profiles
• Merge branch 'pr1003' into dev
• Update espressif32 from 6.3.1 to 6.3.2
• webapp: add app.js.gz
• Disable debug mode, increasing power threshold for active channel detection (#301)
• DPL: account for solar passthrough losses (#307)
• Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development
• Upgrade espMqttClient from 1.4.3 to 1.4.4
• webapp: Update dependencies
• Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development

v23.7.12

🛠 Under the hood

• Upgrade espMqttClient from 1.4.3 to 1.4.4
• webapp: Update dependencies

v23.7.10

🚀 Features

• Feature: Turn off LED 1 if no inverters are enabled for polling

🐛 Fixes

• Fix: Allow sending of ChannelChangeCommand even if EnableCommands is disabled

🛠 Under the hood

• webapp: Update dependencies
• use FSPI for esp32-c3 and revise device profiles
• Merge branch 'pr1003' into dev
• Update espressif32 from 6.3.1 to 6.3.2
• webapp: add app.js.gz

2023.07.09

🐛 Fixes

• fix: linting error
• fix: #294 Passthrough Spelling
• fix: typo
• fix: typo
• fix: Home Assistant MQTT-Auto-Discovery with VE.Direct (#297)

🛠 Under the hood

• DPL: do not use nullptr when printing debug messages (#303)
• floating point input (#302)
• add webapp

2023.07.04.post1

🚀 Features

• Feature: Added touch icon for iOS and Android
• feature: add digest auth on power meter

🐛 Fixes

• Fix: calc expected statistics packet length per parser
• Fix: do not calc sizes multiple times
• fix: undefined pin is shown as -1 instead of 255
• fix: Allow use GPIO0 as onBattery pins
• Fix typo in error messages (#280)
• fix typo: getLastRequestedPowewrLimit()
• Fix vedirect polling (#291)
• fix: linting error

🛠 Under the hood

• Ajout de traductions en Français
• Device Profile for Wemos Lolin32 OLED
• webapp: Update dependencies
• webapp: add app.js.gz
• Added check in statistics data that at least all required bytes are received
• webapp: Update dependencies
• webapp: Update dependencies
• ensure only one PowerCommand and ActivePowerCommand is queued
• DPL: remove unused member variables
• DPL: improve responsiveness
• DPL requirement: disabled inverter commands
• DPL: work on internal copy of pointer to inverter
• DPL: separate unconditional solar passthrough mode
• DPL: replace _plState enum with a simple boolean switch
• DPL: do not repeat being disabled
• DPL: consider the system stable when reusing the old limit
• Dynamic power control and more power control modes on the Huawei PSU
• DPL: use vedirect isdatavalid (#283)
• explain DPL modes set through MQTT in more detail (#282)
• DPL: fix the configured upper limit not being respected (#286)
• Merge branch 'pr/schlimmchen/287' into development
• Merge branch 'pr/MalteSchm/288' into development
• Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development
• DPL: check more requirements and fix backoff initialization (#290)
• add webapp

2023.06.26

🐛 Fixes

• Fix: Reboot loop occoured when no rf module was configured
• fix DPL not reading full solar passthrough voltage thresholds (#265)
• Fix: linting error
• Fix: #274

🛠 Under the hood

• Added new found HMS-400 to DevInfoParser
• webapp: Update dependencies
• Allow the non-existence of the HOYMILES_PIN_ defines
• Pre-Compile a new generic esp32 binary without any pin config.
• Pre-Compile a new generic esp32s3 binary without any pin config.
• webapp: Update dependencies
• Update olikraus/U8g2 from 2.34.18 to 2.34.22
• Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development
• DPL: fix efficiency calculation (#270)
• VE.Direct live view enhancements (#269)
• DPL hysteresis fix and refactor of setNewPowerLimit() (#264)
• set default values for pin mappings if not provided (#275)
• Merge branch 'helgeerbe/issue274' into development
• add webapp

2023.06.21

🐛 Fixes

• Fix: Respect minimum on demand poll rate for power meter

🛠 Under the hood

• Merge branch 'PM_onDemand' into development
• feat(add ability to do a polite power meter read):
• Revert "Fix: String numbers for HMT inverters are mirrored"
• webapp: Update dependencies
• Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development

v23.6.21

🐛 Fixes

• Fix: Reboot loop occoured when no rf module was configured

🛠 Under the hood

• Added new found HMS-400 to DevInfoParser
• webapp: Update dependencies
• Allow the non-existence of the HOYMILES_PIN_ defines
• Pre-Compile a new generic esp32 binary without any pin config.
• Pre-Compile a new generic esp32s3 binary without any pin config.
• webapp: Update dependencies
• Update olikraus/U8g2 from 2.34.18 to 2.34.22

2023.06.14.post2

🛠 Under the hood

• feat(add ability to do a polite power meter read):

2023.06.14.post1

🐛 Fixes

• Fix: Prometheus syntax error with wifi_bssid
• Fix: Make power limiter intervall configurable
• Fix: Respect minimum on demand poll rate for power meter

📚 Documentation

• Doc: Add hint to adjusted partition upgrade guide to use only one .bin file

🛠 Under the hood

• webapp: Update dependencies
• Fix(Power Limiter): hysteresis is not repected properly
• Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development
• Change metric type back to gauge
• perf(PowerMeter): query PowerMeter on demand
• Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development
• Merge branch 'PM_onDemand' into development