equations.tex

\chapter{Equations}\label{equations}

\section{Equation Categories}\label{equation-categories}

Equations in Modelica can be classified into different categories
depending on the syntactic context in which they occur:
\begin{itemize}
\item
  \emph{Normal equality equations} occurring in equation sections,
  including connect-equations and other equation types of special
  syntactic form (\cref{equations-in-equation-sections}).
\item
  \emph{Declaration equations}, which are part of variable, parameter,
  or constant declarations (\cref{declaration-equations}).
\item
  \emph{Modification equations}, which are commonly used to modify
  attributes of classes (\cref{modifications}).
\item
  \emph{Binding equations}, which include both declaration equations and
  modification equations (for the value itself).
\item
  \emph{Initial equations}, which are used to express equations for
  solving initialization problems (\cref{initialization-initial-equation-and-initial-algorithm}).
\end{itemize}

\section{Flattening and Lookup in Equations}\label{flattening-and-lookup-in-equations}

A flattened equation is identical to the corresponding nonflattened
equation.

Names in an equation shall be found by looking up in the partially
flattened enclosing class of the equation.

\section{Equations in Equation Sections}\label{equations-in-equation-sections}

The following kinds of equations may occur in equation sections. The
syntax is defined as follows:
\begin{lstlisting}[language=grammar]
equation :
( simple-expression "=" expression
   | if-equation
   | for-equation
   | connect-clause
   | when-equation
   | component-reference function-call-args )
   comment
\end{lstlisting}
No statements are allowed in equation sections, including the assignment
statement using the := operator.

\subsection{Simple Equality Equations}\label{simple-equality-equations}

Simple equality equations are the traditional kinds of equations known
from mathematics that express an equality relation between two
expressions. There are two syntactic forms of such equations in
Modelica. The first form below is \emph{equality} equations between two
expressions, whereas the second form is used when calling a function
with \emph{several} results. The syntax for simple equality equations is
as follows:
\begin{lstlisting}[language=grammar]
simple-expression "=" expression
\end{lstlisting}
The types of the left-hand-side and the right-hand-side of an equation
need to be compatible in the same way as two arguments of binary
operators (\cref{type-compatible-expressions}).

Three examples:
\begin{itemize}
\item \lstinline!simple_expr1 = expr2;!
\item \lstinline!(if pred then alt1 else alt2) = expr2;!
\item \lstinline!(out1, out2, out3) = function_name(inexpr1, inexpr2);!
\end{itemize}

\begin{nonnormative}
Note: According to the grammar the if-then-else expression in
the second example needs to be enclosed in parentheses to avoid parsing
ambiguities. Also compare with \cref{assignments-from-called-functions-with-multiple-results} about calling
functions with several results in assignment statements.
\end{nonnormative}

\subsection{For-Equations -- Repetitive Equation Structures}\label{for-equations-repetitive-equation-structures}

The syntax of a for-equation is as follows:
\begin{lstlisting}[language=grammar]
for for-indices loop
   { equation ";" }
   end for ";"
\end{lstlisting}

For-equations may optionally use several iterators (for-indices), see
\cref{nested-for-loops-and-reduction-expressions-with-multiple-iterators} for more information:
\begin{lstlisting}[language=grammar]
for-indices:
   for-index {"," for-index}

for-index:
   IDENT [ in expression ]
\end{lstlisting}

The following is one example of a prefix of a for-equation:
\begin{lstlisting}[language=grammar]
for IDENT in expression loop
\end{lstlisting}

\subsubsection{Explicit Iteration Ranges of For-Equations}\label{explicit-iteration-ranges-of-for-equations}
The \lstinline!expression! of a for-equation shall be a vector expression,
where more general array expressions are treated as vector of vectors or vector of matrices.
It is evaluated once for each for-equation, and is evaluated in the scope
immediately enclosing the for-equation. The expression of a for-equation
shall be a parameter expression. The iteration range of a for-equation
can also be specified as Boolean or as an enumeration type, see
\cref{types-as-iteration-ranges} for more information. The loop-variable (\lstinline!IDENT!) is in scope
inside the loop-construct and shall not be assigned to.
For each element of the evaluated vector expression, in the normal order, the loop-variable
gets the value of that element and that is used to evaluate the body of the for-loop.

\begin{example}
\begin{lstlisting}[language=modelica]
for i in 1 : 10 loop           // i takes the values 1, 2, 3, ..., 10
for r in 1.0 : 1.5 : 5.5 loop  // r takes the values 1.0, 2.5, 4.0, 5.5
for i in {1, 3, 6, 7} loop     // i takes the values 1, 3, 6, 7
for i in TwoEnums loop         // i takes the values TwoEnums.one, TwoEnums.two
                               // for TwoEnums = enumeration(one,two)
\end{lstlisting}

The loop-variable may hide other variables as in the following
example. Using another name for the loop-variable is, however, strongly
recommended.
\begin{lstlisting}[language=modelica]
  constant Integer j=4;
  Real x[j]
equation
  for j in 1:j loop  // The loop-variable j takes the values 1,2,3,4
    x[j]=j;          // Uses the loop-variable j
  end for;
\end{lstlisting}
\end{example}


\subsubsection{Implicit Iteration Ranges of For-Equations}\label{implicit-iteration-ranges-of-for-equations}

The iteration range of a loop variable may sometimes be inferred from
its use as an array index. See \cref{implicit-iteration-ranges} for more information.

\begin{example}
\begin{lstlisting}[language=modelica]
  Real x[n],y[n];
for i loop          // Same as:  for i in 1:size(x ,1) loop
  x[i] = 2*y[i];
end for;
\end{lstlisting}
\end{example}

\subsection{Connect-Equations}\label{connect-equations}

A connect-equation has the following syntax:
\begin{lstlisting}[language=grammar]
connect "(" component-reference "," component-reference ")" ";"
\end{lstlisting}

These can be placed inside for-equations and if-equations; provided the
indices of the for-loop and conditions of the if-clause are parameter
expressions that do not depend on cardinality, rooted,
Connections.rooted, or Connections.isRoot. The
for-equations/if-equations are expanded. Connect-equations are described
in detail in \cref{connect-equations-and-connectors}.

The same restrictions apply to Connections\allowbreak{}.branch, Connections\allowbreak{}.root, and
Connections\allowbreak{}.potentialRoot; which after expansion are handled according
to \cref{equation-operators-for-overconstrained-connection-based-equation-systems1}.

\subsection{If-Equations}\label{if-equations}

If-equations have the following syntax:
\begin{lstlisting}[language=grammar]
if expression then
   { equation ";" }
{ elseif expression then
   { equation ";" }    }
[ else
   { equation ";" }
]
end if ";"
\end{lstlisting}

The \lstinline!expression! of an if- or elseif-clause must be a scalar Boolean
expression. One if-clause, and zero or more elseif-clauses, and an
optional else-clause together form a list of branches. One or zero of
the bodies of these if-, elseif- and else-clauses is selected, by
evaluating the conditions of the if- and elseif-clauses sequentially
until a condition that evaluates to true is found. If none of the
conditions evaluate to true the body of the else-clause is selected (if
an else-clause exists, otherwise no body is selected). In an equation
section, the equations in the body are seen as equations that must be
satisfied. The bodies that are not selected have no effect on that model
evaluation.

If-equations in equation sections which do not have exclusively
parameter expressions as switching conditions shall have the same number
of equations in each branch (a missing else is counted as zero equations
and the number of equations is defined after expanding the equations to
scalar equations).

\begin{nonnormative}
If this condition is violated, the single assignment rule would not hold, because the number of equations may change during simulation
although the number of unknowns remains the same.
\end{nonnormative}

\subsection{When-Equations}\label{when-equations}

When-equations have the following syntax:
\begin{lstlisting}[language=grammar]
when expression then
   { equation ";" }
{ elsewhen expression then
   { equation ";" } }
end when ";"
\end{lstlisting}

The \lstinline!expression! of a when-equation shall be a discrete-time Boolean
scalar or vector expression. The statements within a when-equation are
activated when the scalar expression or any of the elements of the
vector expression becomes true.

\begin{example}
The order between the equations in a when-equation does not matter, e.g.
\begin{lstlisting}[language=modelica]
equation
  when x > 2 then
    y3 = 2*x +y1+y2; // Order of y1 and y3 equations does not matter
    y1 = sin(x);
  end when;
  y2 = sin(y1);
\end{lstlisting}
\end{example}

\subsubsection{Defining When-Equations by If-Expressions in Equality Equations}\label{defining-when-equations-by-if-expressions-in-equality-equations}

A when-equation:
\begin{lstlisting}[language=modelica]
equation
  when x > 2 then
    v1 = expr1;
    v2 = expr2;
  end when;
\end{lstlisting}
is conceptually equivalent to the following equations containing special if-expressions
\begin{lstlisting}[language=modelica]
  // Not correct Modelica
  Boolean b(start = x.start > 2);
equation
  b  = x > 2;
  v1 = if edge(b) then expr1 else pre(v1);
  v2 = if edge(b) then expr2 else pre(v2);
\end{lstlisting}

\begin{nonnormative}
The equivalence is conceptual since \lstinline!pre($\ldots$)! of a non discrete-time \lstinline!Real! variable or expression can only be used within a when-clause.  Example:
\begin{lstlisting}[language=modelica]
  /* discrete */ Real x;
  input Real u;
  output Real y;
equation
  when sample() then
    x = a * pre(x) + b * pre(u);
  end when;
  y = x;
\end{lstlisting}

Here, \lstinline!x! is a discrete-time variable (whether it is declared with the \lstinline!discrete! prefix or not), but \lstinline!u! and \lstinline!y! cannot be discrete-time variables
(since they are not assigned in when-clauses).  However, \lstinline!pre(u)! is legal within the when-clause, since the body of the when-clause is only evaluated at events, and thus all expressions
are discrete-time expressions.
\end{nonnormative}

The start-values of the introduced \lstinline!Boolean! variables are defined by the taking the start-value of the when-condition, as above where \lstinline!b! is a parameter
variable.  The start-value of the special functions \lstinline!initial!, \lstinline!terminal!, and \lstinline!sample! is \lstinline!false!.

\subsubsection{Restrictions on Equations within When-Equations}\label{restrictions-on-equations-within-when-equations}

\begin{itemize}
\item
  When-statements may not occur inside initial equations.
\item
  When-equations cannot be nested.
\end{itemize}

\begin{example}
The following when-equation is invalid:
\begin{lstlisting}[language=modelica]
when x > 2 then
  when y1 > 3 then
    y2 = sin(x);
  end when;
end when;
\end{lstlisting}
\end{example}

The equations within the when-equation must have one of the following
forms:
\begin{itemize}
\item
  \lstinline!v = expr;!
\item
  \lstinline!(out1, out2, out3, $\ldots$) = function_call_name(in1, in2, $\ldots$);!
\item
  operators \lstinline!assert!, \lstinline!terminate!, \lstinline!reinit!
\item
  For- and if-equations if the equations within the for- and
  if-equations satisfy these requirements.
\item
  The different branches of when/elsewhen must have the same set of
  component references on the left-hand side.
\item
  The branches of an if-then-else clause inside when-equations must have
  the same set of component references on the left-hand side, unless the
  if-then-else have exclusively parameter expressions as switching
  conditions.
\end{itemize}

Any left hand side reference, (\lstinline!v!, \lstinline!out1!, \ldots), in a when-clause must
be a component reference, and any indices must be parameter expressions.

\begin{nonnormative}
The needed restrictions on equations within a when-equation
becomes apparent with the following example:
\begin{lstlisting}[language=modelica]
  Real x, y;
equation
  x + y = 5;
  when condition then
    2 * x + y = 7; // error: not valid Modelica
  end when;
\end{lstlisting}

When the equations of the when-equation are not activated it is
not clear which variable to hold constant, either \lstinline!x! or \lstinline!y!.
A corrected version of this example is:
\begin{lstlisting}[language=modelica]
  Real x,y;
equation
  x + y = 5;
  when condition then
    y = 7 - 2 * x; // fine
  end when;
\end{lstlisting}
Here, variable \lstinline!y! is held constant when the when-equation is
deactivated and \lstinline!x! is computed from the first equation using the
value of \lstinline!y! from the previous event instant.
\end{nonnormative}

\subsubsection{Application of the Single-assignment Rule to When-Equations}\label{application-of-the-single-assignment-rule-to-when-equations}

The Modelica single-assignment rule (\cref{synchronous-data-flow-principle-and-single-assignment-rule}) has implications for
when-equations:
\begin{itemize}
\item
  Two when-equations may \emph{not} define the same variable.

\begin{nonnormative}
Without this rule this may actually happen for the erroneous
model \lstinline!DoubleWhenConflict! below, since there are two equations
(\lstinline!close = true; close = false;!) defining the same variable
\lstinline!close!. A conflict between the equations will occur if both
conditions would become \lstinline!true! at the same time instant.
\begin{lstlisting}[language=modelica]
model DoubleWhenConflict
  Boolean close;   // Erroneous model: close defined by two equations!
equation
  $\ldots$
  when condition1 then
    $\ldots$
    close = true;
  end when;
  when condition2 then
    close = false;
  end when;
  $\ldots$
end DoubleWhenConflict;
\end{lstlisting}

One way to resolve the conflict would be to give one of the two
when-equations higher priority. This is possible by rewriting the
when-equation using \lstinline!elsewhen!, as in the \lstinline!WhenPriority! model
below or using the statement version of the when-construct, see \cref{when-statements}.
\end{nonnormative}

\item
  When-equations involving elsewhen-parts can be used to resolve
  assignment conflicts since the first of the when/elsewhen parts are
  given higher priority than later ones:
\begin{nonnormative}
Below it is well defined what happens if both conditions
become \lstinline!true! at the same time instant since \lstinline!condition1! with
associated conditional equations has a higher priority than \lstinline!condition2!.
\begin{lstlisting}[language=modelica]
model WhenPriority
  Boolean close;   // Correct model: close defined by two equations!
algorithm
  $\ldots$
  when condition1 then
    close = true;
  elsewhen condition2 then
    close = false;
  end when;
  $\ldots$
end WhenPriority;
\end{lstlisting}
\end{nonnormative}
\end{itemize}

\subsection{reinit}\label{reinit}

\lstinline!reinit! can only be used in the body of a when-equation.  It has the following syntax:
\begin{lstlisting}[language=modelica]
reinit(x, expr);
\end{lstlisting}

The operator reinitializes \lstinline!x! with \lstinline!expr! at an event instant. \lstinline!x! is a
\lstinline!Real!
variable (or an array of \lstinline!Real! variables) that must be selected as a
state (resp., states) , i.e.\ reinit on x implies
stateSelect=StateSelect.always on x. \lstinline!expr! needs to be type-compatible
with \lstinline!x!. \lstinline!reinit! can for the same variable (resp.\ array of
variables) only be applied (either as an individual variable or as part
of an array of variables) in one equation (having \lstinline!reinit! of the same
variable in when and else-when of the same variable is allowed). In case
of \lstinline!reinit! active during initialization (due to when initial), see
\cref{initialization-initial-equation-and-initial-algorithm}.

\lstinline!reinit! does not break the single assignment rule, because \lstinline!reinit(x, expr)! in equations evaluates \lstinline!expr! to a value,
then at the end of the current event iteration step it assigns this value to \lstinline!x! (this copying from values to reinitialized state(s) is
done after all other evaluations of the model and before copying \lstinline!x! to \lstinline!pre(x)!).

\begin{example}
If a higher index system is present, i.e., constraints between
state variables, some state variables need to be redefined to non-state
variables. During simulation, non-state variables should be chosen in
such a way that variables with an applied \lstinline!reinit! are
selected as states at least when the corresponding when-clauses become
active. If this is not possible, an error occurs, since otherwise
\lstinline!reinit! would be applied on a non-state variable.

Example for the usage of \lstinline!reinit! (bouncing ball):
\begin{lstlisting}[language=modelica]
der(h) = v;
der(v) = if flying then -g else 0;
flying = not (h <= 0 and v <= 0);
when h < 0 then
  reinit(v, -e * pre(v));
end when
\end{lstlisting}
\end{example}

\subsection{assert}\label{assert}

An equation or statement of one of the following forms:
\begin{lstlisting}[language=modelica]
assert(condition, message); // Uses level=AssertionLevel.error
assert(condition, message, assertionLevel);
assert(condition, message, level = assertionLevel);
\end{lstlisting}

is an assertion, where \lstinline!condition! is a Boolean expression, \lstinline!message! is a
string expression, and \lstinline!level! is a built-in enumeration with a default
value. It can be used in equation sections or algorithm sections.

\begin{nonnormative}
This means that assert can be called as if it were a function with three formal parameters, the third formal parameter has the
name \lstinline!level! and the default value \lstinline!AssertionLevel.error!.
\end{nonnormative}

If the \lstinline!condition! of an assertion is true, \lstinline!message! is not evaluated and
the procedure call is ignored. If the \lstinline!condition! evaluates to false
different actions are taken depending on the level input:
\begin{itemize}
\item
  \lstinline!level = AssertionLevel.error!: The current evaluation is aborted. The
  simulation may continue with another evaluation. If the simulation is aborted, \lstinline!message! indicates the
  cause of the error.
  \begin{nonnormative}
  Ways to continue simulation with another evaluation include using a shorter step-size, or changing the values of iterationvariables.
  \end{nonnormative}
  Failed assertions take precedence over successful termination, such
  that if the model first triggers the end of successful analysis by
  reaching the stop-time or explicitly with \lstinline!terminate!, but the
  evaluation with \lstinline!terminal()=true! triggers an assert, the analysis
  failed.
\item
  \lstinline!level = AssertionLevel.warning!: The current evaluation is not aborted.
  \lstinline!message! indicates the cause of the warning.
  \begin{nonnormative}
  It is recommended to report the warning only once when the condition becomes false, and it is reported that the condition is no longer
  violated when the condition returns to true. The \lstinline!assert! statement shall have no influence on the behavior of the model.
  For example, by evaluating the condition and reporting the message only after accepted integrator steps.  \lstinline!condition! needs to
  be implicitly treated with \lstinline!noEvent! since otherwise events might be triggered that can lead to slightly changed simulation results.
  \end{nonnormative}
\end{itemize}

\begin{nonnormative}
The \lstinline!AssertionLevel.error! case can be used to avoid evaluating a
model outside its limits of validity; for instance, a function to
compute the saturated liquid temperature cannot be called with a
pressure lower than the triple point value.

The \lstinline!AssertionLevel.warning! case can be used when the boundary of
validity is not hard: for instance, a fluid property model based on a
polynomial interpolation curve might give accurate results between
temperatures of 250 K and 400 K, but still give reasonable results in
the range 200 K and 500 K. When the temperature gets out of the smaller
interval, but still stays in the largest one, the user should be warned,
but the simulation should continue without any further action. The
corresponding code would be:
\begin{lstlisting}[language=modelica]
assert(T > 250 and T < 400, "Medium model outside full accuracy range", AssertionLevel.warning);
assert(T > 200 and T < 500, "Medium model outside feasible region");
\end{lstlisting}
\end{nonnormative}

\subsection{terminate}\label{terminate}

The \lstinline!terminate! equation or statement (using function
syntax) successfully terminates the analysis which was carried out,
see also \cref{assert}. The termination is not immediate at the place
where it is defined since not all variable results might be available
that are necessary for a successful stop. Instead, the termination
actually takes place when the current integrator step is successfully
finalized or at an event instant after the event handling has been
completed before restarting the integration.

The terminate clause has a string argument indicating the reason for the success.

\begin{example}
The intention of the terminate clause is to give more complex stopping criteria than a fixed point in time:
\begin{lstlisting}[language=modelica]
model ThrowingBall
  Real x(start=0);
  Real y(start=1);
equation
  der(x) = $\ldots$;
  der(y) = $\ldots$;
algorithm
  when y < 0 then
    terminate("The ball touches the ground");
  end when;
end ThrowingBall;
\end{lstlisting}
\end{example}

\subsection{Equation Operators for Overconstrained Connection-Based Equation Systems}\label{equation-operators-for-overconstrained-connection-based-equation-systems}

See \cref{equation-operators-for-overconstrained-connection-based-equation-systems1} for a description of this topic.

\section{Synchronous Data-flow Principle and Single Assignment Rule}\label{synchronous-data-flow-principle-and-single-assignment-rule}

Modelica is based on the synchronous data flow principle and the single
assignment rule, which are defined in the following way:
\begin{enumerate}
\item Discrete variables keep their actual values until these variables are explicitly changed.
Differentiated variables have \lstinline!der(x)! corresponding to the time-derivative of \lstinline!x!,
and \lstinline!x! is continuous, except when reinit is triggered - see \cref{reinit}.
Variable values can be accessed at any time instant during continuous integration and at event instants.

\item At every time instant, during continuous integration and at event instants,
the equations express relations between variables which have to be fulfilled concurrently..

\item Computation and communication at an event instant does not take time.
\begin{nonnormative}
If computation or communication time has to be simulated, this property has to be explicitly modeled.
\end{nonnormative}

\item There must exist a perfect matching of variables to equations after flattening, where a variable can only
be matched to equations that can contribute to solving for the variable
(\firstuse{perfect matching rule} --- previously called \emph{single assignment rule}); see also globally balanced \cref{balanced-models}.
\end{enumerate}

\section{Events and Synchronization}\label{events-and-synchronization}

The integration is halted and an event occurs whenever an event
generation expression, e.g.\ \lstinline!x > 2! o or \lstinline!floor(x)!, changes
its value. An event generating expression has an internal buffer, and
the value of the expression can only be changed at event instants. If
the evaluated expression is inconsistent with the buffer, that will
trigger an event and the buffer will be updated with a new value at the
event instant. During continuous integration event generation expression
has the constant value of the expression from the last event instant.

\begin{nonnormative}
A root finding mechanism is needed which determines a small time interval in which the expression changes its value; the event occurs
at the right side of this interval.
\end{nonnormative}

\begin{example}
\begin{lstlisting}[language=modelica]
y = if u > uMax then uMax else if u < uMin then uMin else u;
\end{lstlisting}

During continuous integration always the same if-branch is
evaluated. The integration is halted whenever \lstinline!u-uMax! or \lstinline!u-uMin!
crosses zero. At the event instant, the correct if-branch is
selected and the integration is restarted.

Numerical integration methods of order $n$ ($n \geq 1$) require
continuous model equations which are differentiable up to order $n$. This
requirement can be fulfilled if Real elementary relations are not
treated literally but as defined above, because discontinuous changes
can only occur at event instants and no longer during continuous
integration.
\end{example}

\begin{nonnormative}
It is a quality of implementation issue that the following special relations
\begin{lstlisting}[language=modelica]
time >= discrete expression
time < discrete expression
\end{lstlisting}
trigger a time event at \lstinline!time! = \emph{discrete expression}, i.e., the
event instant is known in advance and no iteration is needed to find the
exact event instant.
\end{nonnormative}

Relations are taken literally also during continuous integration, if the
relation or the expression in which the relation is present, are the
argument of \lstinline!noEvent!. \lstinline!smooth! also
allows relations used as argument to be taken literally. The \lstinline!noEvent!
feature is propagated to all subrelations in the scope of the \lstinline!noEvent!
application. For \lstinline!smooth! the liberty to not allow literal evaluation is
propagated to all subrelations, but the smooth-property itself is not
propagated.

\begin{example}
\begin{lstlisting}[language=modelica]
x = if noEvent(u > uMax) then uMax elseif noEvent(u < uMin) then uMin else u;
y = noEvent(  if u > uMax then uMax elseif u < uMin then uMin else u);
z = smooth(0, if u > uMax then uMax elseif u < uMin then uMin else u);
\end{lstlisting}

In this case \lstinline!x = y = z!, but a tool might generate events for \lstinline!z!. The
if-expression is taken literally without inducing state events.

The \lstinline!smooth! function is useful, if e.g.\ the modeler can guarantee that
the used if-clauses fulfill at least the continuity requirement of
integrators. In this case the simulation speed is improved, since no
state event iterations occur during integration. The \lstinline!noEvent! function is
used to guard against \emph{outside domain} errors, e.g.\ \lstinline!y = if noEvent(x>= 0) then sqrt(x) else 0.!
\end{example}

All equations and assignment statements within when-clauses and all assignment statements within function classes are implicitly treated with \lstinline!noEvent!, i.e., relations within the scope of
these operators never induce state or time events.

\begin{nonnormative}
Using state events in when-clauses is unnecessary because the body of a when-clause is not evaluated during continuous integration.
\end{nonnormative}

\begin{example}
\begin{lstlisting}[language=modelica]
Limit1 = noEvent(x1 > 1);  // Error since Limit1 is a discrete-time variable
when noEvent(x1>1) or x2>10 then // error, when-conditions is not a discrete-time expression
  Close = true;
end when;
\end{lstlisting}
\end{example}

Modelica is based on the synchronous data flow principle (\cref{synchronous-data-flow-principle-and-single-assignment-rule}).

\begin{nonnormative}
The rules for the synchronous data flow principle guarantee
that variables are always defined by a unique set of equations. It is
not possible that a variable is e.g.\ defined by two equations, which
would give rise to conflicts or non-deterministic behavior. Furthermore,
the continuous and the discrete parts of a model are always
automatically ``synchronized''. Example:
\begin{lstlisting}[language=modelica]
equation // Illegal example
  when condition1 then
    close = true;
  end when;

  when condition2 then
    close = false;
  end when;
\end{lstlisting}

This is not a valid model because rule 4 is violated since there
are two equations for the single unknown variable close. If this would
be a valid model, a conflict occurs when both conditions become true at
the same time instant, since no priorities between the two equations are
assigned. To become valid, the model has to be changed to:
\begin{lstlisting}[language=modelica]
equation
  when condition1 then
    close = true;
  elsewhen condition2 then
    close = false;
  end when;
\end{lstlisting}

Here, it is well-defined if both conditions become true at the
same time instant (\lstinline!condition1! has a higher priority than
\lstinline!condition2!).
\end{nonnormative}

There is no guarantee that two different events occur at the same time
instant.

\begin{nonnormative}
As a consequence, synchronization of events has to be
explicitly programmed in the model, e.g.\ via counters. Example:
\begin{lstlisting}[language=modelica]
  Boolean fastSample, slowSample;
  Integer ticks(start=0);
equation
  fastSample = sample(0,1);
algorithm
  when fastSample then
    ticks      := if pre(ticks) < 5 then pre(ticks)+1 else 0;
    slowSample := pre(ticks) == 0;
  end when;
algorithm
  when fastSample then   // fast sampling
    $\ldots$
  end when;
algorithm
  when slowSample then   // slow sampling (5-times slower)
    $\ldots$
  end when;
\end{lstlisting}

The \lstinline!slowSample! when-clause is evaluated at every 5th occurrence of the
\lstinline!fastSample! when-clause.
\end{nonnormative}

\begin{nonnormative}
The single assignment rule and the requirement to explicitly
program the synchronization of events allow a certain degree of model
verification already at compile time.
\end{nonnormative}

\section{Initialization, initial equation, and initial algorithm}\label{initialization-initial-equation-and-initial-algorithm}

Before any operation is carried out with a Modelica model (e.g.,
simulation or linearization), initialization takes place to assign
consistent values for all variables present in the model. During this
phase, also the derivatives (\lstinline!der!), and the pre-variables (\lstinline!pre!),
are interpreted as unknown algebraic variables. The initialization uses
all equations and algorithms that are utilized in the intended operation
(such as simulation or linearization).

The equations of a when-clause are active during initialization, if and only if they are explicitly enabled with \lstinline!initial()!, and only in one of the two forms
\lstinline!when initial() then! or \lstinline!when {$\ldots$, initial(), $\ldots$} then! (and similarly for algorithms see below).  In this case, the when-clause equations remain active during the
whole initialization phase.  In case of a \lstinline!reinit(x, expr)! being active during initialization (due to being inside \lstinline!when initial()!) this is interpreted as adding
\lstinline!x = expr! (the \lstinline!reinit!-equation) as an initial equation.

\begin{nonnormative}
If a when-clause equation \lstinline!v = expr;! is not active during the initialization phase, the equation \lstinline!v = pre(v)! is added for
initialization.  This follows from the mapping rule of when-clause equations.  If the condition of the when-clause contains \lstinline!initial()!,
but not in one of the specific forms, the when-clause is not active during initialization: \lstinline!when not initial() then print("simulation started"); end when;!
\end{nonnormative}

The algorithmic statements within a when-statement are active during initialization, if and only they are explicitly enabled with \lstinline!initial()!, and only in one of the two forms
\lstinline!when initial() then! or \lstinline!when {$\ldots$, initial(), $\ldots$} then!. In this case, the algorithmic statements within the when-statement remain active during the whole
initialization phase.

\begin{nonnormative}
There is no special handling of inactive when-statements during initialization, instead
variables assigned in when-statements are initialized using \lstinline!v := pre(v)!
before the body of the algorithm (since they are discrete), see \cref{execution-of-an-algorithm-in-a-model}.
\end{nonnormative}

Further constraints, necessary to determine the initial values of all
variables, can be defined in the following ways:
\begin{enumerate}
\item
  As equations in an \lstinline!initial equation! section or as assignments in an
  \lstinline!initial algorithm! section. The equations and assignments in these
  initial sections are purely algebraic, stating constraints between the
  variables at the initial time instant. It is not allowed to use
  when-clauses in these sections.
\item
  For a non-discrete (that is continuous-time) \lstinline!Real! variable \lstinline!vc!, the equation \lstinline!pre(vc) = vc! is added to the initialization equations.
  \begin{nonnormative}
  If \lstinline!pre(vc)! is not present in the flattened model, a tool may choose not to introduce this equation, or if it was introduced
  it can eliminate it (to avoid the introduction of many dummy variables \lstinline!pre(vc)!).
  \end{nonnormative}
\item
  Implicitly by using the \lstinline!start! attribute for variables with \lstinline!fixed = true!.  With \lstinline!start! given by \lstinline!startExpression!:
  \begin{itemize}
  \item
    For a non-discrete (that is continuous-time) \lstinline!Real! variable \lstinline!vc!, the equation \lstinline!vc = startExpression! is added to the initialization equations.
  \item
    For a discrete variables \lstinline!vd!, the equation \lstinline!pre(vd) = startExpression! is added to the initialization equations.
  \item
    For a variable declared as \lstinline!constant! or \lstinline!parameter!, no equation is added to the initialization equations.
  \end{itemize}
\end{enumerate}

For constants and parameters, the attribute \lstinline!fixed! defaults to \lstinline!true!, which is the only allowed value for a constant.  For other variables,
\lstinline!fixed! defaults to \lstinline!false!.

\lstinline!start!-values of variables having \lstinline!fixed = false! can be used as initial guesses, in case iterative solvers are used in the initialization phase.

\begin{nonnormative}
In case of iterative solver failure, it is recommended to specially report those variables for which the solver needs an initial guess, but which only have the default
value of the \lstinline!start! attribute as defined in \cref{predefined-types-and-classes}, since the lack of appropriate initial guesses is a likely cause of the solver failure.
\end{nonnormative}

If a parameter has a modifier for the \lstinline!start! attribute, does not have \lstinline!fixed = false!, and neither has a binding equation nor is part of a record having a binding equation,
the modifier for the \lstinline!start! attribute can be used to add a parameter binding equation assigning the parameter to that \lstinline!start! value.  In this case a diagnostic message is
recommended in a simulation model.

\begin{nonnormative}
This is used in libraries to give non-zero defaults so that users can quickly combine models and simulate without setting parameters; but still easily find the parameters
that need to be set.
\end{nonnormative}

All variables declared as \lstinline!parameter! having \lstinline!fixed = false! are treated as unknowns during the initialization phase, i.e.\ there must be additional equations for them --- and
the \lstinline!start!-value can be used as a guess-value during initialization.

\begin{nonnormative}
In the case a parameter has both a binding equation and \lstinline!fixed = false! a diagnostics is recommended, but the parameter should be solved from the binding equation.

Non-discrete (that is continuous-time) \lstinline!Real! variables \lstinline!vc! have exactly one initialization value since the rules above assure that during initialization
\lstinline!vc = pre(vc) = vc.startExpression! (if \lstinline!fixed = true!).

Before the start of the integration, it must be guaranteed that for all variables \lstinline!v!, \lstinline!v = pre(v)!. If this is not the case for some variables
\lstinline!vi!, \lstinline!pre(vi) := vi! must be set and an event iteration at the initial time must follow, so the model is re-evaluated, until this condition is fulfilled.

A Modelica translator may first transform the continuous equations of a model, at least conceptually, to state space form.  This may require to differentiate equations for index
reduction, i.e., additional equations and, in some cases, additional unknown variables are introduced.  This whole set of equations, together with the additional constraints
defined above, should lead to an algebraic system of equations where the number of equations and the number of all variables (including \lstinline!der! and \lstinline!pre!
variables) is equal.  Often, this is a nonlinear system of equations and therefore it may be necessary to provide appropriate guess values (i.e., \lstinline!start! values and
\lstinline!fixed = false!) in order to compute a solution numerically.

It may be difficult for a user to figure out how many initial equations have to be added, especially if the system has a higher index. A tool may add or remove initial equations
automatically such that the resulting system is structurally nonsingular.  In these cases diagnostics are appropriate since the result is not unique and may not be what the user
expects.  A missing initial value of a discrete variable which does not influence the simulation result, may be automatically set to the \lstinline!start! value or its default without
informing the user.  For example, variables assigned in a when-clause which are not accessed outside of the when-clause and where \lstinline!pre! is not explicitly
used on these variables, do not have an effect on the simulation.
\end{nonnormative}

\begin{example}
Continuous time controller initialized in steady-state:
\begin{lstlisting}[language=modelica]
  Real y(fixed = false);  // fixed=false is redundant
equation
  der(y) = a * y + b * u;
initial equation
  der(y) = 0;
\end{lstlisting}

This has the following solution at initialization:
\begin{lstlisting}[language=modelica]
der(y) = 0;
y = - b / a * u;
\end{lstlisting}
\end{example}

\begin{example}
Continuous time controller initialized either in steady-state or by providing a \lstinline!start! value for state \lstinline!y!:
\begin{lstlisting}[language=modelica]
  parameter Boolean steadyState = true;
  parameter Real y0 = 0 "start value for y, if not steadyState";
  Real y;
equation
  der(y) = a * y + b * u;
initial equation
  if steadyState then
    der(y) = 0;
  else
    y = y0;
  end if;
\end{lstlisting}

This can also be written as follows (this form is less clear):
\begin{lstlisting}[language=modelica]
  parameter Boolean steadyState = true;
  Real y    (start = 0, fixed = not steadyState);
  Real der_y(start = 0, fixed = steadyState) = der(y);
equation
  der(y) = a * y + b * u;
\end{lstlisting}
\end{example}

\begin{example}
Discrete time controller initialized in steady-state:
\begin{lstlisting}[language=modelica]
  discrete Real y;
equation
  when {initial(), sampleTrigger} then
    y = a * pre(y) + b * u;
  end when;
initial equation
  y = pre(y);
\end{lstlisting}

This leads to the following equations during initialization:
\begin{lstlisting}[language=modelica]
y = a * pre(y) + b * u;
y = pre(y);
\end{lstlisting}
with the solution:
\begin{lstlisting}[language=modelica]
y := (b * u) / (1 - a);
pre(y) := y;
\end{lstlisting}
\end{example}

\subsection{The Number of Equations Needed for Initialization}\label{the-number-of-equations-needed-for-initialization}

\begin{nonnormative}
In general, for the case of a pure (first order) ordinary
differential equation (ODE) system with $n$ state variables and $m$ output
variables, we will have $n+m$ unknowns in the simulation problem. The ODE
initialization problem has $n$ additional unknowns corresponding to the
derivative variables. At initialization of an ODE we will need to find
the values of $2n+m$ variables, in contrast to just $n+m$ variables to be
solved for during simulation.
\end{nonnormative}

\begin{example}
Consider the following simple equation system:
\begin{lstlisting}[language=modelica]
der(x1) = f1(x1);
der(x2) = f2(x2);
y = x1+x2+u;
\end{lstlisting}

Here we have three variables with unknown values: two dynamic
variables that also are state variables, \lstinline!x1! and \lstinline!x2!, i.e.,
$n=2$, one output variable \lstinline!y!, i.e., $m=1$, and one input variable \lstinline!u! with
known value. A consistent solution of the initial value problem
providing initial values for \lstinline!x1!, \lstinline!x2!, \lstinline!der(x1)!,
\lstinline!der(x2)!, and \lstinline!y! needs to be found. Two additional initial
equations thus need to be provided to solve the initialization problem.

Regarding DAEs, only that at most $n$ additional equations are
needed to arrive at $2n+m$ equations in the initialization system. The
reason is that in a higher index DAE problem the number of dynamic
continuous-time state variables might be less than the number of state
variables $n$. As noted in \cref{initialization-initial-equation-and-initial-algorithm} a tool may add/remove
initial equations to fulfill this requirement, if appropriate
diagnostics are given.
\end{example}

\subsection{Recommended selection of start-values}\label{recommended-selection-of-start-values}

In general many variables have start-values that are not fixed and
selecting a sub-set of these can give a consistent set of start-values
close to the user-expectations. The following gives a non-normative
procedure for finding such a sub-set.

\begin{nonnormative}
A model has a hierarchical component structure. Each component
of a model can be given a unique model component hierarchy level number.
The top level model has a level number of 1. The level number increases
by 1 for each level down in the model component hierarchy. The model
component hierarchy level number is used to give start values a
confidence number, where a lower number means that the start value is
more confident. Loosely, if the start value is set or modified on level
i then the confidence number is i. If a start value is set by a possibly
hierarchical modifier at the top level, then this start value has the
highest confidence, namely 1 irrespectively on what level, the variable
itself is declared.
\end{nonnormative}