WiFi Fun Box
| CP210x |
|---|
 |
Q: Only able to connect to Wi-Fi network on some devices
A: This happens due to a channel conflict. Open up your browser and go to http://192.168.4.1/settings on a device that is able to connect to the CatchME network and change the Channel number from 1 to any number 1-14
Q: SSID's wont load
A: Try resetting the SSID list. Open up your browser and go to http://192.168.4.1/settings, click on RESET (Reset Saved SSIDs)
Q: Deauth 0 pkts/s
A: If you see 0 pkts/s on the CatchME UI, make sure your install the right version of ESP8266 board package (it must be version 2.0.0!)
Q: Deauth attack wont work
A: If it can send packets but your target doesn't lose its connection, then the WiFi router either uses 802.11w and it's protected against such attacks
Q: CatchME wont work
A: Try to resetting the configuration to factory default by pressing reset button, press the reset button and then before 5 seconds (or after the LED indicator blinks twice) press again the reset button (if you see the second LED indicator is blinking, it means your device is being reset)
Q: How I know if my device are booting up
A: The power LED indicator will blinks twice (it means your device is booting up normally)