Skip to content

Latest commit

 

History

History
223 lines (165 loc) · 10 KB

README.md

File metadata and controls

223 lines (165 loc) · 10 KB

tmo-monitor logo

tmo-monitor

A lightweight, cross-platform Python 3 script that can monitor the T-Mobile Home Internet Nokia, Arcadyan, and Sagecom 5G Gateways for 4G/5G bands, cellular site (tower), and internet connectivity and reboots as needed or on-demand.

By default, checks for n41 5G signal and connectivity to google.com via ping.

Getting Started

Install dependencies

pip3 install .

The command will then be available anywhere as tmo-monitor.py.

Windows

  1. On Windows, open the folder where you downloaded the project.
  2. Click File > Open Windows PowerShell
  3. Run the above pip3 install . command.
  4. To use, either:
    • Run cmd.exe within PowerShell first
    • Open cmd.exe (Command Prompt) instead of PowerShell
    • Run python bin/tmo-monitor.py in PowerShell from inside the project directory

When in doubt, consult this document or run tmo-monitor.py --help.

Usage

Command line usage

usage: tmo-monitor.py [-h] [--connectivity-check {ping,http}]
                      [-I INTERFACE]
                      [--http-target HTTP_TARGET] [--status-code {[100,600)}]
                      [-H PING_HOST] [--ping-count PING_COUNT] [--ping-interval PING_INTERVAL] [-6]
                      [-R] [-r]
                      [--skip-bands] [--skip-5g-bands] [--skip-connectivity-check] [--skip-enbid]
                      [--uptime UPTIME]
                      [-4 {B2,B4,B5,B12,B13,B25,B26,B41,B46,B48,B66,B71}] [-5 {n41,n71}]
                      [--enbid ENBID]
                      [--print-config]
                      [--logfile LOGFILE] [--log-all] [--log-delta] [--syslog]
                      [--model {NOK5G21,ARCKVD21,FAST5688W}]
                      [username] [password]

Check T-Mobile Home Internet cellular band(s) and connectivity and reboot if necessary

positional arguments:
  username              the username (most likely "admin")
  password              the administrative password (will be requested at runtime if not passed as argument)

optional arguments:
  -h, --help            show this help message and exit
  --connectivity-check {ping,http}
                        type of connectivity check to perform (defaults to ping)
  -I INTERFACE, --interface INTERFACE
                        the network interface to use for ping. pass the source IP on Windows
  --http-target HTTP_TARGET
                        the URL to perform a http check against (defaults to https://google.com/generate_204)
  --status-code {[100,600)}
                        expected HTTP status code for http connectivity check (defaults to 204)
  -H PING_HOST, --ping-host PING_HOST
                        the host to ping (defaults to google.com)
  --ping-count PING_COUNT
                        how many ping health checks to perform (defaults to 1)
  --ping-interval PING_INTERVAL
                        how long in seconds to wait between ping health checks (defaults to 10)
  -6, --ping-6          use IPv6 ping
  -R, --reboot          skip health checks and immediately reboot gateway
  -r, --skip-reboot     skip rebooting gateway
  --skip-bands          skip check for connected 4g band
  --skip-5g-bands       skip check for connected 5g band
  --skip-connectivity-check, --skip-ping
                        skip connectivity check
  --skip-enbid          skip check for connected eNB ID
  --uptime UPTIME       how long the gateway must be up before considering a reboot (defaults to 90 seconds)
  -4 {B2,B4,B5,B12,B13,B25,B26,B41,B46,B48,B66,B71}, --4g-band {B2,B4,B5,B12,B13,B25,B26,B41,B46,B48,B66,B71}
                        the 4g band(s) to check
  -5 {n41,n71}, --5g-band {n41,n71}
                        the 5g band(s) to check (defaults to n41)
  --enbid ENBID         check for a connection to a given eNB ID
  --print-config        output configuration settings
  --logfile LOGFILE     output file for logging
  --log-all             always write connection details to logfile
  --log-delta           write connection details to logfile on change
  --syslog              log to syslog
  --model {NOK5G21,ARCKVD21,FAST5688W}
                        the gateway model (defaults to NOK5G21)

Options

Gateway Model

Gateway Model: --model

By default, the script will assume the silver-colored Nokia NOK5G21 gateway is being used.

Valid values are NOK5G21 for the Nokia gateway, ARCKVD21 for the square, black-colored Arcadyan gateway without top vent holes, or FAST5688W for the square, black-colored Sagecom gateway with top vent holes.

Connectivity check

Mode: --connectivity-check Defaults to ping. Can instead use a HTTP(S) based health check with the http value. The http health check defaults to checking https://google.com/generate_204 and checking its status code.

Interface: -I --interface Can be used to specify the network interface used by the ping command. Useful if T-Mobile Home Internet is not your default network interface: e.g., this is running on a dual WAN router. On Windows, pass the source IP address to use. http connectivity checks will be dictated by system routing rules.

HTTP check

Target: --http-target Defaults to https://google.com/generate_204 - both http and https targets are supported by the http value of the --connectivity-check flag.

Status Code: --status-code Defaults to 204 for use with https://google.com/generate_204 - in most common use cases, a 200 status code is expected instead. Expects a numeric value between 100-599 (inclusive).

Ping options

ping checks are the default connectivity check in tmo-monitor. It's possible to use HTTP(S)-based checks instead. Refer to the --connectivity-check flag.

Ping Host: -H --ping-host Defaults to google.com - override if you'd like to ping an alternate host to determine internet connectivity. Must specify a host if flag is provided - you can simply omit the flag if you'd like to use the default google.com ping check.

Ping Count: --ping-count Defaults to 1 - override if you'd like to perform multiple ping checks before rebooting. Short-circuits if a successful ping is encountered. Will reboot if all fail.

Ping Interval: --ping-interval Defaults to 10 seconds - override if you'd like to use a different interval.

Ping v6: -6 --ping-6 Use IPv6 ping.

Reboot options

Reboot: -R --reboot Skip health checks and immediately reboot gateway.

Skip Reboot: -r --skip-reboot Skip rebooting gateway.

Skip Bands: --skip-bands Skip check for connected 4g band.

Skip 5g Bands: --skip-5g-bands Skip check for connected 5g band.

Skip Ping: --skip-connectivity-check --skip-ping Skip check for successful connectivity check.

Uptime Threshold: --uptime Defaults to 90 seconds - Specify a required uptime for an implicit reboot to occur. Intended to allow sufficient time to establish a connection and stabilize band selection. Setting is used to avoid boot looping, but is not respected when the --reboot flag is used.

Connection configuration

4G Band Checking: -4 --4g-band Specify a 4G band you expect the gateway to be connected to. Repeat the flag to allow multiple acceptable bands. Case-sensitive.

5G Band Checking: -5 --5g-band Defaults to n41 - Specify a 5G band you expect the gateway to be connected to. Repeat the flag to allow multiple acceptable bands. Case-sensitive.

eNB ID: --enbid Specify the desired cell site you expect the gateway to be connected to. Expects a numeric eNB ID to be provided. cellmapper.net is a helpful resource for finding eNB ID values for nearby cell sites.

General settings

Logfile: --logfile LOGFILE Output file for logging. Defaults to tmo-monitor.log

Log all: --log-all Always write connection details to logfile. Checks all configuration settings.

Log delta: --log-delta Write connection details to logfile on change of any configuration setting or long ping time.

Default settings

  • Username == admin
  • Password -> interactive prompt
  • 5G band == n41
  • Reboot on failure to ping google.com

Environment (.env) options

The script is normally run in batch mode, such as scheduled through a cron job. Interactive command-line options are meant to be used as overrides to defaults or environment settings.

A common usage pattern would be to configure the script using a .env file to reboot on 5G band and wifi check. When messing with the settings, a user might want to specify --skip-reboot. When a user knows that the reboot is needed they might specify --reboot for an immediate reboot.

  • Default settings have the lowest precendence.
  • Environment settings--whether in the shell environment or a .env file--override the defaults
  • Command line options have the highest precedence and override both default settings and environment settings

Environment settings are meant to be declarative. They fall into four categories:

  • Login settings (username, password)
  • Configuration settings
    • Ping settings (target host/interface, number of pings, interval)
    • Connection settings (preferred band, eNB ID, etc.)
  • Reboot settings: request reboot on any number of failed checks.
    • Skip reboot overrides all reboot requests
    • Reboot interval overrides all reboot requests
    • There is no "reboot immediately" option
  • General settings:
    • Default output/silent mode (not yet implemented)
    • Logging settings

Exit Status

tmo-monitor uses the following exit status codes:

  • Clean execution: 0
  • GENERAL_ERROR: 1
  • CONFIGURATION_ERROR: 2
  • API_ERROR: 3
  • REBOOT_PERFORMED: 4

Roadmap

(Not yet implemented):

  • Alternate connectivity checks
  • systemd service configuration

Tip

Run this script with either a cronjob or as a systemd service to implement periodic recurring T-Mobile Home Internet health checks with automatic rebooting.