Skip to content

Latest commit

 

History

History
349 lines (259 loc) · 12.4 KB

CHANGES.rst

File metadata and controls

349 lines (259 loc) · 12.4 KB
Raw

Changelog

in-progress

2020-05-14 0.17.0

  • node-yun-http: Make it compile from the firmware-builder on Arduino Core 1.5.6.2 on Linux
  • Prepare the generic-firmware and scale-adjust-firmware for firmware-builder
  • Improve firmware building for scale-adjust-firmware re. artefact naming
  • Add vanilla “SerialDebugger” library from http://playground.arduino.cc/Code/SerialDebugger
  • Update node-wifi-mqtt.ino firmware. Thanks, Matthias and Giuseppe!
    • Improve SerialDebugger output
    • Fix output of local ip address with SerialDebugger
    • Improve connectivity flow
  • node-wifi-mqtt-homie: Workaround for ArduinoJson regarding float precision. Thanks, Alex!
  • Update EmBencode library
  • Add howto about PlatformIO
  • Add support for Seeeduino Stalker v3.1 to Open Hive GSM sensor node firmware
  • node-esp8266-generic: ESP8266 Wemos D1 mini based scale with Wifi / GSM support for SIM800. Thanks, Stefan!
  • Update documentation
  • Update Makefiles for macOS
  • Bare-Arduino-Project: update to the latest master. Thanks, Hoijui!
  • node-esp32-generic: ESP32 TTGO-T-CALL based scale with Wifi / GSM support for SIM800. Thanks, Stefan!
  • Update URL to UUID generator. Thanks, Alan and Weef!

2017-04-16 0.16.0

  • Try to fix scale-adjust-firmware regarding ESP8266 compatibility again

  • node-wifi-mqtt.ino firmware:

    • Fix DEEPSLEEP_TIME order of magnitude: MEASUREMENT_INTERVAL is in ms already. Thanks, Matthias!
    • Fix IP address output. Thanks, Matthias!
    • When SENSOR_DUMMY is enabled, don't use any real sensors. Thanks, Giuseppe!
    • Add comment about connecting GPIO#16 to RST for waking up after deep sleep. Thanks, Giuseppe and Matthias!
    • Add sensor ADS1231. Thanks, Clemens!

  • Improve firmware-builder

    • Add support for architecture "ESP"
    • Add variables TARGET_BOARD_TAG and TARGET_BOARD_SUB to firmware builder helper output
    • Add firmware builder helper to Makefile for node-wifi-mqtt-homie
  • Properly define and use HE_CONTAINERS in generic-firmware

2017-04-06 0.15.0

  • scale-adjust-firmware (scale-adjust-hx711.ino and scale-adjust-ads1231.ino)

    • Make it compile against Espressif/ESP8266
    • Make it work on the ESP8266 at runtime by satisfying the watchdog. Thanks, Martin!
    • Properly read numeric value from serial port. Thanks, Matthias!
    • Fix computing the loadCellKgDivider. Thanks, Clemens!
    • Fix compilation on Arduino version <= 1.0.6
  • generic-firmware: Reduce loop interval when being in bootstrap phase
  • node-gsm-http: Fix Makefile for ESP8266. Thanks, Matthias!
  • node-yun-http: Add firmware node-yun-http.ino for Mois Box. Thanks, Markus!

  • Improve the node-wifi-mqtt.ino firmware for the node-wifi-mqtt:

    • Fix Makefile for ESP8266 reported not to work on Ubuntu 16.10. Thanks, Matthias!
    • Completely overhaul the basic ESP8266/MQTT firmware making it more efficient and flexible, see also Improve the basic “node-wifi-mqtt” firmware. Thanks, Giuseppe and Matthias!
    • Start with single device counts of DHTxx and DS18B20 sensors to make firmware even more basic out of the box. Thanks again, Matthias!
    • Modularize and streamline code to better serve educational purposes
    • Enable connecting to multiple WiFi access points with multiple attempts. Thanks, Matthias and Clemens!
    • Read and transmit battery level. Thanks, Matthias!
    • Read and transmit free heap memory
    • Improve overall configurability and wifi_connect/mqtt_connect re. retrying
    • Add deep sleep mode

2017-03-31 0.14.0

  • Add slot, build infrastructure and dependency libraries for mois-node
  • Update GPRSbee library to 1.9.2
  • Update OneWire library to 2.3.3
  • Update HX711 library incorporating our fix »Define “yield” as noop for older Arduino Core releases«
  • Update Arduino-Makefile and makeEspArduino tools
  • Improve firmwares node-wifi-mqtt-homie and node-wifi-mqtt-homie-battery

  • node-wifi-mqtt:

    • Fix JSON serialization: Transmit sensor readings as float values and improve robustness. Thanks, Matthias and Giuseppe!
    • Improve configuration and documentation, last but not least regarding MQTT authentication.

2017-03-17 0.13.0

  • Add x-www-form-urlencoded serialization to lib-terkin-data library
  • Fix JSON serialization: Don’t convert values to string
  • Improve CSV serialization demo: Set float precision to three digits

2017-02-01 unreleased

  • Add JSON serialization to lib-terkin-data library

2017-01-14 0.12.0

  • Add ArduinoSTL, a STL and iostream implementation for Arduino based on uClibc++

  • Update firmware for node-wifi-mqtt (node-wifi-mqtt.ino). Thanks Clemens and Karsten!

    • Make things actually work
    • Add dependency "Adafruit_MQTT_Library"
    • Add more sensors
    • Add Makefile and documentation

  • Improve Homie Firmware for node-wifi-mqtt-homie

    • Add dependencies as git submodules
    • Add Makefile
  • Add lib-terkin-data library: Flexible data collection for decoupling sensor reading and telemetry domains

2017-01-10 0.11.0

  • Add firmware for node-wifi-mqtt-homie (node-homie-basic.ino). Contributed as PR #1 by Alexander Wilms of Imkerverein Nettetal e.V.. Thanks a bunch!

  • Update firmware for open-hive-firmware-gprs: (openhive-gsm-wifi.ino). Thanks, Clemens!

    • Add support for HX711
    • Add support for ESP8266
  • Add "makeEspArduino", a makefile for ESP8266 Arduino projects by Peter Lerup
  • Pull update to HX711 submodule
  • Fix compilation errors for ADS1231 library on ESP8266
  • Improve documentation

2016-11-01 0.10.0

  • Add sketch and update documentation about CSV payload transmission and forwarding to UART using a JeeLink device to complete the Open Hive RFM69 trio: openhive-rfm69-gateway-uart (rfm69-gateway-uart.ino). Thanks Richard!
  • Update sketch (beta release) and add documentation about node-wifi-mqtt (node-wifi-mqtt.ino). Thanks Clemens and Karsten!

2016-09-17 0.9.0

  • Add documentation about scale-adjust-firmware.
  • Update firmware for open-hive-firmware-gprs "openhive-gsm-wifi.ino": Modularize sensors and debugging. Thanks, Clemens!

  • Add firmwares for Open Hive RFM69 tandem with build infrastructure and documentation

  • Improve documentation

2016-07-08 0.8.1

  • Add documentation about the new generic-firmware, "multihop.ino".
  • Switch “node-gprs-http” sketch from Rob Tillaarts DHTlib to DHTstable, as suggested by Clemens. Thanks again!

2016-07-08 0.8.0

  • Make building “generic” sketch for x86_64 a bit easier, just do cd generic; ./sim/build.
  • Add open-hive-firmware-gprs from Clemens Gruber as "openhive-gsm-wifi.ino". Thanks, Clemens!
  • Satisfy dependencies of “node-gprs-http” per git submodules (mostly), accompanied by Arduino Makefile yak shaving.
  • Add scale-adjust-firmware. Thanks again, Clemens!
  • Finish restructuring work on "generic" sketch. Proof-of-Concept node69-relay69x95-gateway95 is working!

2016-07-04 0.7.1

  • Improve documentation at README, beradio-c++ and firmware-builder.

2016-07-04 0.7.0

General

  • Add sketch multihop.ino as a module composition breadboard.
  • Add Terrine, an application boilerplate for convenient MCU development.
  • Run generic sketch on x86_64 incl. pseudo radio link communication using RadioHead RH_TCP driver.

BERadio

  • Bring libberadio in shape as BERadio C++.
  • BERadioMessage does generic Bencode serialization on top of EmBencode using a map for holding sensor family values.
  • Automatic message fragmentation based on MTU (maximum transfer unit) size for BERadioMessage.
  • Last mile from BERadio message to radio transmission, use RadioHead RH_TCP driver on Unix.
  • Move non-BERadio code to Terrine.

Libraries

  • Add RadioHead library, we are using the RH_RF69 and RH_RF95 drivers.
  • Switch from vanilla EmBencode to Hiveeyes fork.
  • Switch to branch “oo-improvements” of EmBencode fork.
  • Add "Standard C++ for Arduino" library StandardCplusplus.
  • Switch from vanilla StandardCplusplus to Hiveeyes fork fixing an issue with gcc5.
  • Switch submodule EmBencode to branch “oo-improvements”
  • Make submodules EmBencode and StandardCplusplus track specific feature branches of Hiveeyes forks.
  • Switch submodule EmBencode to branch “header-guard” fixing redefinition of 'class EmBencode’ errors.
  • Add guard to BERadio header file fixing redefinition of 'class BERadioMessage’ errors.
  • Switch to EmBencode branch "fix-typeinfo-reference".

2016-06-17 0.6.1

2016-06-16 0.6.0

General

  • Add project tooling Arduino-Makefile and Bare-Arduino-Project as git submodules under tools/.
  • Adapt vanilla Makefiles from Bare-Arduino-Project for vendor node-gprs-http.
  • Add Hiveeyes foundation libraries as proposal for decoupling sensor and transmitter domains.

  • Add convention for automated firmware builder that make --file Makefile-Xyz.mk all-plus-firmware-info should output the path to the target HEX- and ELF files, e.g.:

    TARGET_HEX: ../bin/node-gprs-http/pro328/node-gprs-http.hex
TARGET_ELF: ../bin/node-gprs-http/pro328/node-gprs-http.elf

Open Hive GPRSbee

This piece of software supports the openhive-seeeduino-stalker carrying a GPRSbee transceiver using the software components Terkin, Hiveeyes-Lib and OpenHive-Lib.

  • Add ArduinoJson and GPRSbee library as git submodules under libraries/.
  • Add example sketch openhive-gsm-wifi.ino demonstrating simple HTTP+JSON communication over GPRSbee.
  • Update HE_API_URL to use different url for non-TLS communication: http://swarm.hiveeyes.org/api-notls/. The default GPRSbee devices don't do SSL.
  • Connect to access point with authentication by default, using GPRSBEE_AP_USER and GPRSBEE_AP_PASS. Disable authenticated mode by setting GPRSBEE_AP_AUTH to false.

Documentation

  • Fix make target “docs-html”
  • Upgrade to Sphinx 1.4.1
  • Add “sphinx_rtf_theme==0.1.9” to requirements-dev.txt due to error "sphinx_rtd_theme is no longer a hard dependency since version 1.4.0. Please install it manually."
  • Add label hiveeyes-arduino and changes to documentation for referencing from other Sphinx instances.
  • Disable caching of remote intersphinx inventories

2016-05-26 0.5.2

  • Add libberadio to evaluate whether a Standard C++ based firmware will still fit into the 32 KB flash memory of the little ATmega328.
  • Get Sphinx documentation in shape

2016-04-16 0.5.1

  • Add Sphinx for documentation

2016-04-16 0.5.0

  • Get real with HX711
  • Polish repository for publishing on GitHub

2016-02-20 0.4.1

  • Fix nasty battery draining

2016-02-03 0.4.0

  • Add RADIO_ATC capability
  • Update RFM69 library
  • Get the node into the field
  • Interval tuning

2015-11-12 0.3.0

  • Update RFM69 library
  • Add code for DS18B20 sensor
  • Add MCU sleep modes (LowPower)
  • Add serial-to-mqtt forwarding
  • Design BERadio communication paradigm
  • Work on update-over-the-air (WirelessProgramming)
  • Add code for HX711 and DHT22 sensors
  • Add RF-to-UART gateway code, see gateway-rfm69-beradio.ino

2015-08-19 0.2.0

  • Add Bencode [cccamp2015]

2015-02-03 0.1.0

2014-11-04 0.0.0

  • Start working on Hiveeyes Arduino using RFM12