-
Notifications
You must be signed in to change notification settings - Fork 112
/
cmdline.txt
81 lines (81 loc) · 2.68 KB
/
cmdline.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
# ======================================================================
# cmdline.txt file for RGBtoHDMI (https://github.com/hoglet67/RGBtoHDMI)
# ======================================================================
#
# sampling06: Sample points for modes 0..6
# - Specify a single value here, in the range 0..5
#
# The sampling06 value can be copied from the Calibration Summary screen:
# - Select Mode 6 screen
# - Type *HELP to get some text on the screen
# - Press Auto Calibation (right button)
# - Select: Feature Menu/Info/Calibration Summary
# - Use the value of the "Offset" (all should be the same)
#
# sampling7: Sample points for mode 7
# - Specify eight comma seperated values: 0,A,B,C,D,E,F,Half
# -- or --
# - Specify a single value here, in the range 0..7
#
# The sampling7 values can be copied from the Calibration Summary screen:
# - Select Mode 7 screen
# - Type *HELP to get some text on the screen
# - Press Auto Calibation (right button)
# - Select: Feature Menu/Info/Calibration Summary
# - For A..F use the six "Offset" values
# - For H use the "Half" value
#
# info: the default info screen
# - 0 is the firmware version
# - 1 is the calibration summary
# - 2 is the calibration detail
#
# palette: colour palette number
# - 0 is Default
# - 1 is Inverse
# - 2 is Mono 1
# - 3 is Mono 2
# - 4 is Just Red
# - 5 is Just Green
# - 6 is Just Blue
# - 7 is Not Red
# - 8 is Not Green
# - 9 is Not Blue
#
# scalines: show visible scanlines in modes 0..6
# - 0 is scanlines off
# - 1 is scanlines on
#
# mux: initial setting of the input mux
# - 0 is direct
# - 1 is via the 74LS08 buffer (for Issue 2/4 Elk only)
#
# elk: indicates the interface is connected to an elk
# - 0 is Model B/Master
# - 1 is Elk
#
# vsync: indicates the position of the HDMI vsync
# - 0 is vsync off
# - 1 is vsync on
#
# pllh: controls the HDMI clock correction mode
# - 0 is no correction
# - 1 is correct for 623 lines
# - 2 is correct for 623 lines
# - 3 is correct for 625 lines
# - 4 is correct for 626 lines
# - 5 is correct for 627 lines
#
# nbuffers: controls how many buffers are used in Mode 0..6
# - 0 = single buffered (this will tear and will mess up the OSD)
# - 1 = double buffered (this might tear)
# - 2 = triple buffered
# - 3 = quadruple buffered
#
# debug: enables debug mode
# - 0 is debug off
# - 1 is debug on
#
# Important: All the properties must be on a single line, and no blank lines!
#
sampling06=3 sampling7=0,2,2,2,2,2,2,0 info=1 palette=0 scanlines=0 mux=0 elk=0 vsync=0 pllh=0 nbuffers=2 debug=0