Unable to select which heater is exposed/used via incomfort #28318

prier4ever · 2019-10-29T08:19:29Z

Home Assistant release with the issue: 100.3 (all versions up to to at least 101.x)

Last working Home Assistant release (if known): N/A (never)

Operating environment (Hass.io/Docker/Windows/etc.): N/A (all)

Integration: incomfort

Description of problem:
If more than one heater is present only one is shown in Home Assistant. There is no option to configure or select the heater with climate control.

Problem-relevant configuration.yaml entries and (fill out even if it seems unimportant):

incomfort:
  host: 192.168.0.216

Traceback (if applicable):

2019-10-29 07:31:22 DEBUG (MainThread) [incomfortclient] Gateway(hostname=10.0.0.249) instantiated.
2019-10-29 07:31:22 DEBUG (MainThread) [incomfortclient] _get(url=heaterlist.json, auth=None)
2019-10-29 07:31:23 DEBUG (MainThread) [incomfortclient] _get(url=heaterlist.json): response = {'heaterlist': ['********728', '********429', None, None, None, None, None, None]}
2019-10-29 07:31:23 DEBUG (MainThread) [incomfortclient] Heater(serial_no=********728) instantiated.
2019-10-29 07:31:23 DEBUG (MainThread) [incomfortclient] Heater(serial_no=********429) instantiated.
2019-10-29 07:31:23 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0, auth=None)
2019-10-29 07:31:23 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0): response = {'nodenr': 162, 'ch_temp_lsb': 165, 'ch_temp_msb': 25, 'tap_temp_lsb': 105, 'tap_temp_msb': 16, 'ch_pressure_lsb': 150, 'ch_pressure_msb': 0, 'room_temp_1_lsb': 255, 'room_temp_1_msb': 127, 'room_temp_set_1_lsb': 255, 'room_temp_set_1_msb': 127, 'room_temp_2_lsb': 255, 'room_temp_2_msb': 127, 'room_temp_set_2_lsb': 255, 'room_temp_set_2_msb': 127, 'displ_code': 126, 'IO': 0, 'serial_year': 19, 'serial_month': 5, 'serial_line': 15, 'serial_sn1': 0, 'serial_sn2': 97, 'serial_sn3': 28, 'room_set_ovr_1_msb': 0, 'room_set_ovr_1_lsb': 0, 'room_set_ovr_2_msb': 0, 'room_set_ovr_2_lsb': 0, 'rf_message_rssi': 31, 'rfstatus_cntr': 0}
2019-10-29 07:31:23 DEBUG (MainThread) [incomfortclient] Heater(********728).status() = {'display_code': 126, 'display_text': 'standby', 'fault_code': None, 'is_burning': False, 'is_failed': False, 'is_pumping': False, 'is_tapping': False, 'heater_temp': 65.65, 'tap_temp': 42.01, 'pressure': 1.5, 'serial_no': '********728', 'nodenr': 162, 'rf_message_rssi': 31, 'rfstatus_cntr': 0}

Additional information:
In our setup only one of the heaters has a climate control unit. In this case heater 1 (********429) so climate control is not present in Home Assistant.

The text was updated successfully, but these errors were encountered:

probot-home-assistant · 2019-10-29T08:57:10Z

Hey there @zxdavb, mind taking a look at this issue as its been labeled with a integration (incomfort) you are listed as a codeowner for? Thanks!

zxdavb · 2019-10-29T10:22:40Z

@prier4ever Thanks for your contribution to HA.

I can easily change the code so that you an choose which heater HA uses by simply adding the following to the configuration.yaml (currently, the system is hard-coded to use index 0):

incomfort:
  host: 192.168.0.216
  heater_index: 1

If HA is configured to access the right WaterHeater (heater), then the corresponding Climate entity will also be known to HA.

This is assuming that heaters always keep the same slots. Do you know if the slots are consistent, or do they ever change? If so, I could use:

incomfort:
  host: 192.168.0.216
  heater_serial: ********429

However, having access to all heaters (e.g. tracking the fault_state of each heater) would require some work/testing...

either by yourself (using an alpha branch of HA), or
by providing me access to your gateway via HTTP (TCP/IP)

Let me know if this is interesting to you, otherwise I will crack on with the heater_index (or heater_serial) idea.

zxdavb · 2019-10-29T13:34:23Z

OK, I am going to add all heaters to HA - this will require a change to the client too. My testing will be limited to the case where there is only one heater.

prier4ever · 2019-10-29T15:26:05Z

Do you know if the slots are consistent, or do they ever change?
Yes, they can change when you do a factory reset of the gateway, i have a test Home Assistent docker so i can test it for you.

zxdavb · 2019-10-29T16:02:46Z

Yes, they can change when you do a factory reset of the gateway

I wrote the code to use serial numbers instead of slots, so this is not at issue. I have completed the - initial testing is OK.

so i can test it for you.

Could you run the latest dev version of HA?

I will update the HA repo & the client library (in pypi) after get back from the kid's swimming.

prier4ever · 2019-10-29T17:58:48Z

Stil gets info from only one heater but now showing two climate controls

2019-10-29 17:49:57 DEBUG (MainThread) [incomfortclient] Gateway(hostname=10.0.0.249) instantiated.
2019-10-29 17:49:57 DEBUG (MainThread) [incomfortclient] _get(url=heaterlist.json, auth=None)
2019-10-29 17:49:58 DEBUG (MainThread) [incomfortclient] _get(url=heaterlist.json): response = {'heaterlist': ['********429', '********728', None, None, None, None, None, None]}
2019-10-29 17:49:58 DEBUG (MainThread) [incomfortclient] Heater(serial_no=********429) instantiated.
2019-10-29 17:49:58 DEBUG (MainThread) [incomfortclient] Heater(serial_no=********728) instantiated.
2019-10-29 17:49:58 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0, auth=None)
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0): response = {'nodenr': 38, 'ch_temp_lsb': 95, 'ch_temp_msb': 12, 'tap_temp_lsb': 115, 'tap_temp_msb': 13, 'ch_pressure_lsb': 165, 'ch_pressure_msb': 0, 'room_temp_1_lsb': 158, 'room_temp_1_msb': 7, 'room_temp_set_1_lsb': 158, 'room_temp_set_1_msb': 7, 'room_temp_2_lsb': 255, 'room_temp_2_msb': 127, 'room_temp_set_2_lsb': 255, 'room_temp_set_2_msb': 127, 'displ_code': 126, 'IO': 0, 'serial_year': 19, 'serial_month': 2, 'serial_line': 15, 'serial_sn1': 0, 'serial_sn2': 34, 'serial_sn3': 29, 'room_set_ovr_1_msb': 0, 'room_set_ovr_1_lsb': 0, 'room_set_ovr_2_msb': 0, 'room_set_ovr_2_lsb': 0, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Heater(********429).status() = {'display_code': 126, 'display_text': 'standby', 'fault_code': None, 'is_burning': False, 'is_failed': False, 'is_pumping': False, 'is_tapping': False, 'heater_temp': 31.67, 'tap_temp': 34.43, 'pressure': 1.65, 'serial_no': '********429', 'nodenr': 38, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0, auth=None)
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0): response = {'nodenr': 38, 'ch_temp_lsb': 95, 'ch_temp_msb': 12, 'tap_temp_lsb': 115, 'tap_temp_msb': 13, 'ch_pressure_lsb': 165, 'ch_pressure_msb': 0, 'room_temp_1_lsb': 158, 'room_temp_1_msb': 7, 'room_temp_set_1_lsb': 158, 'room_temp_set_1_msb': 7, 'room_temp_2_lsb': 255, 'room_temp_2_msb': 127, 'room_temp_set_2_lsb': 255, 'room_temp_set_2_msb': 127, 'displ_code': 126, 'IO': 0, 'serial_year': 19, 'serial_month': 2, 'serial_line': 15, 'serial_sn1': 0, 'serial_sn2': 34, 'serial_sn3': 29, 'room_set_ovr_1_msb': 0, 'room_set_ovr_1_lsb': 0, 'room_set_ovr_2_msb': 0, 'room_set_ovr_2_lsb': 0, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Heater(********728).status() = {'display_code': 126, 'display_text': 'standby', 'fault_code': None, 'is_burning': False, 'is_failed': False, 'is_pumping': False, 'is_tapping': False, 'heater_temp': 31.67, 'tap_temp': 34.43, 'pressure': 1.65, 'serial_no': '********728', 'nodenr': 38, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Room(room_no=1) instantiated.
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Room(room_no=1) instantiated.
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Room(1).status() = {'room_temp': 19.5, 'setpoint': 19.5, 'override': 0.0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Room(1).status() = {'room_temp': 19.5, 'setpoint': 19.5, 'override': 0.0}

zxdavb · 2019-10-29T20:49:57Z

I've pushed the new client to PyPI - just running CI on the changes to the integration.

When that's done, you can run the dev version of HA to test it.

zxdavb · 2019-10-29T21:31:20Z

OK, you can test know - let me know if there are any issues.

prier4ever · 2019-10-30T06:20:05Z

OK, you can test know - let me know if there are any issues.

I have tested it, see earlier response.

Stil gets info from only one heater but now showing two climate controls on the dashboard in Home Assistant. The vars are the same values as the first heater, the second has no climate control.

2019-10-29 17:49:57 DEBUG (MainThread) [incomfortclient] Gateway(hostname=10.0.0.249) instantiated.
2019-10-29 17:49:57 DEBUG (MainThread) [incomfortclient] _get(url=heaterlist.json, auth=None)
2019-10-29 17:49:58 DEBUG (MainThread) [incomfortclient] _get(url=heaterlist.json): response = {'heaterlist': ['********429', '********728', None, None, None, None, None, None]}
2019-10-29 17:49:58 DEBUG (MainThread) [incomfortclient] Heater(serial_no=********429) instantiated.
2019-10-29 17:49:58 DEBUG (MainThread) [incomfortclient] Heater(serial_no=********728) instantiated.
2019-10-29 17:49:58 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0, auth=None)
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0): response = {'nodenr': 38, 'ch_temp_lsb': 95, 'ch_temp_msb': 12, 'tap_temp_lsb': 115, 'tap_temp_msb': 13, 'ch_pressure_lsb': 165, 'ch_pressure_msb': 0, 'room_temp_1_lsb': 158, 'room_temp_1_msb': 7, 'room_temp_set_1_lsb': 158, 'room_temp_set_1_msb': 7, 'room_temp_2_lsb': 255, 'room_temp_2_msb': 127, 'room_temp_set_2_lsb': 255, 'room_temp_set_2_msb': 127, 'displ_code': 126, 'IO': 0, 'serial_year': 19, 'serial_month': 2, 'serial_line': 15, 'serial_sn1': 0, 'serial_sn2': 34, 'serial_sn3': 29, 'room_set_ovr_1_msb': 0, 'room_set_ovr_1_lsb': 0, 'room_set_ovr_2_msb': 0, 'room_set_ovr_2_lsb': 0, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Heater(********429).status() = {'display_code': 126, 'display_text': 'standby', 'fault_code': None, 'is_burning': False, 'is_failed': False, 'is_pumping': False, 'is_tapping': False, 'heater_temp': 31.67, 'tap_temp': 34.43, 'pressure': 1.65, 'serial_no': '********429', 'nodenr': 38, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0, auth=None)
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0): response = {'nodenr': 38, 'ch_temp_lsb': 95, 'ch_temp_msb': 12, 'tap_temp_lsb': 115, 'tap_temp_msb': 13, 'ch_pressure_lsb': 165, 'ch_pressure_msb': 0, 'room_temp_1_lsb': 158, 'room_temp_1_msb': 7, 'room_temp_set_1_lsb': 158, 'room_temp_set_1_msb': 7, 'room_temp_2_lsb': 255, 'room_temp_2_msb': 127, 'room_temp_set_2_lsb': 255, 'room_temp_set_2_msb': 127, 'displ_code': 126, 'IO': 0, 'serial_year': 19, 'serial_month': 2, 'serial_line': 15, 'serial_sn1': 0, 'serial_sn2': 34, 'serial_sn3': 29, 'room_set_ovr_1_msb': 0, 'room_set_ovr_1_lsb': 0, 'room_set_ovr_2_msb': 0, 'room_set_ovr_2_lsb': 0, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Heater(********728).status() = {'display_code': 126, 'display_text': 'standby', 'fault_code': None, 'is_burning': False, 'is_failed': False, 'is_pumping': False, 'is_tapping': False, 'heater_temp': 31.67, 'tap_temp': 34.43, 'pressure': 1.65, 'serial_no': '********728', 'nodenr': 38, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Room(room_no=1) instantiated.
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Room(room_no=1) instantiated.
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Room(1).status() = {'room_temp': 19.5, 'setpoint': 19.5, 'override': 0.0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Room(1).status() = {'room_temp': 19.5, 'setpoint': 19.5, 'override': 0.0}

Manual:

http://10.0.0.249/data.json?heater=0

{"nodenr": 38,
"ch_temp_lsb": 7,
"ch_temp_msb": 21,
"tap_temp_lsb": 133,
"tap_temp_msb": 14,
"ch_pressure_lsb": 180,
"ch_pressure_msb": 0,
"room_temp_1_lsb": 89,
"room_temp_1_msb": 7,
"room_temp_set_1_lsb": 108,
"room_temp_set_1_msb": 7,
"room_temp_2_lsb": 255,
"room_temp_2_msb": 127,
"room_temp_set_2_lsb": 255,
"room_temp_set_2_msb": 127,
"displ_code": 0,
"IO": 10,
"serial_year": **,
"serial_month": **,
"serial_line": **,
"serial_sn1": **,
"serial_sn2": *4,
"serial_sn3": 29 ,
"room_set_ovr_1_msb": 7,
"room_set_ovr_1_lsb": 108,
"room_set_ovr_2_msb": 0,
"room_set_ovr_2_lsb": 0,
"rf_message_rssi": 39,
"rfstatus_cntr": 0}

http://10.0.0.249/data.json?heater=1 (has no climate control uses zones)

{"nodenr": 162,
"ch_temp_lsb": 151,
"ch_temp_msb": 22,
"tap_temp_lsb": 243,
"tap_temp_msb": 16,
"ch_pressure_lsb": 156,
"ch_pressure_msb": 0,
"room_temp_1_lsb": 255,
"room_temp_1_msb": 127,
"room_temp_set_1_lsb": 255,
"room_temp_set_1_msb": 127,
"room_temp_2_lsb": 255,
"room_temp_2_msb": 127,
"room_temp_set_2_lsb": 255,
"room_temp_set_2_msb": 127,
"displ_code": 102,
"IO": 2,
"serial_year": **,
"serial_month": **,
"serial_line": **,
"serial_sn1": **,
"serial_sn2": *7,
"serial_sn3": 28 ,
"room_set_ovr_1_msb": 0,
"room_set_ovr_1_lsb": 0,
"room_set_ovr_2_msb": 0,
"room_set_ovr_2_lsb": 0,
"rf_message_rssi": 31,
"rfstatus_cntr": 0}

zxdavb · 2019-10-30T17:11:55Z

Hi,

Please let me know what version of HA you are running.

cat ~/.homeassistant/.HA_VERSION

Please do the equivalent of (to check/reset the version of the client):

pip list | grep incomfort
pip uninstall -y incomfort-client

... then restart HA.

Please use the /states UI rather than Lovelace.

zxdavb · 2019-10-30T17:38:10Z

This is wrong:

2019-10-29 17:49:58 DEBUG (MainThread) [incomfortclient] Heater(serial_no=********429) instantiated.
2019-10-29 17:49:58 DEBUG (MainThread) [incomfortclient] Heater(serial_no=********728) instantiated.

2019-10-29 17:49:58 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0, auth=None)
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0): response = {'nodenr': 38, 'ch_temp_lsb': 95, 'ch_temp_msb': 12, 'tap_temp_lsb': 115, 'tap_temp_msb': 13, 'ch_pressure_lsb': 165, 'ch_pressure_msb': 0, 'room_temp_1_lsb': 158, 'room_temp_1_msb': 7, 'room_temp_set_1_lsb': 158, 'room_temp_set_1_msb': 7, 'room_temp_2_lsb': 255, 'room_temp_2_msb': 127, 'room_temp_set_2_lsb': 255, 'room_temp_set_2_msb': 127, 'displ_code': 126, 'IO': 0, 'serial_year': 19, 'serial_month': 2, 'serial_line': 15, 'serial_sn1': 0, 'serial_sn2': 34, 'serial_sn3': 29, 'room_set_ovr_1_msb': 0, 'room_set_ovr_1_lsb': 0, 'room_set_ovr_2_msb': 0, 'room_set_ovr_2_lsb': 0, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Heater(********429).status() = {'display_code': 126, 'display_text': 'standby', 'fault_code': None, 'is_burning': False, 'is_failed': False, 'is_pumping': False, 'is_tapping': False, 'heater_temp': 31.67, 'tap_temp': 34.43, 'pressure': 1.65, 'serial_no': '********429', 'nodenr': 38, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}

2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0, auth=None)
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0): response = {'nodenr': 38, 'ch_temp_lsb': 95, 'ch_temp_msb': 12, 'tap_temp_lsb': 115, 'tap_temp_msb': 13, 'ch_pressure_lsb': 165, 'ch_pressure_msb': 0, 'room_temp_1_lsb': 158, 'room_temp_1_msb': 7, 'room_temp_set_1_lsb': 158, 'room_temp_set_1_msb': 7, 'room_temp_2_lsb': 255, 'room_temp_2_msb': 127, 'room_temp_set_2_lsb': 255, 'room_temp_set_2_msb': 127, 'displ_code': 126, 'IO': 0, 'serial_year': 19, 'serial_month': 2, 'serial_line': 15, 'serial_sn1': 0, 'serial_sn2': 34, 'serial_sn3': 29, 'room_set_ovr_1_msb': 0, 'room_set_ovr_1_lsb': 0, 'room_set_ovr_2_msb': 0, 'room_set_ovr_2_lsb': 0, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}
2019-10-29 17:49:59 DEBUG (MainThread) [incomfortclient] Heater(********728).status() = {'display_code': 126, 'display_text': 'standby', 'fault_code': None, 'is_burning': False, 'is_failed': False, 'is_pumping': False, 'is_tapping': False, 'heater_temp': 31.67, 'tap_temp': 34.43, 'pressure': 1.65, 'serial_no': '********728', 'nodenr': 38, 'rf_message_rssi': 39, 'rfstatus_cntr': 0}

The second block sould be _get(url=data.json?heater=1)

prier4ever · 2019-10-30T18:13:26Z

cat ~/.homeassistant/.HA_VERSION

I use a docker image and have two versions running in my test setting.
https://hub.docker.com/r/homeassistant/home-assistant/

Version 0.100.3
pip list | grep incomfort
incomfort-client 0.3.5

Version 0.102.0.dev20191030
pip list | grep incomfort
incomfort-client 0.3.5

In both versions i replaced the incomfort folder with the home-assistant-30d42a1488d37d30e538de37b44bc3311ab382db version from you`re branche.

prier4ever · 2019-10-30T19:03:31Z

With the lastest dev its working now..

pip list | grep incomfort
incomfort-client 0.4.0

2019-10-30 19:01:49 DEBUG (MainThread) [incomfortclient] Gateway(hostname=10.0.0.249) instantiated.
2019-10-30 19:01:49 DEBUG (MainThread) [incomfortclient] _get(url=heaterlist.json, auth=None)
2019-10-30 19:01:50 DEBUG (MainThread) [incomfortclient] _get(url=heaterlist.json): response = {'heaterlist': ['********429', '********728', None, None, None, None, None, None]}
2019-10-30 19:01:50 DEBUG (MainThread) [incomfortclient] Heater(serial_no=********429) instantiated.
2019-10-30 19:01:50 DEBUG (MainThread) [incomfortclient] Heater(serial_no=********728) instantiated.
2019-10-30 19:01:50 DEBUG (MainThread) [incomfortclient] Gateway(10.0.0.249).heaters() = ['********429', '********728', None, None, None, None, None, None]
2019-10-30 19:01:50 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0, auth=None)
2019-10-30 19:01:50 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=0): response = {'nodenr': 38, 'ch_temp_lsb': 63, 'ch_temp_msb': 19, 'tap_temp_lsb': 210, 'tap_temp_msb': 12, 'ch_pressure_lsb': 179, 'ch_pressure_msb': 0, 'room_temp_1_lsb': 166, 'room_temp_1_msb': 7, 'room_temp_set_1_lsb': 158, 'room_temp_set_1_msb': 7, 'room_temp_2_lsb': 255, 'room_temp_2_msb': 127, 'room_temp_set_2_lsb': 255, 'room_temp_set_2_msb': 127, 'displ_code': 0, 'IO': 10, 'serial_year': 19, 'serial_month': 2, 'serial_line': 15, 'serial_sn1': 0, 'serial_sn2': 34, 'serial_sn3': 29, 'room_set_ovr_1_msb': 7, 'room_set_ovr_1_lsb': 108, 'room_set_ovr_2_msb': 0, 'room_set_ovr_2_lsb': 0, 'rf_message_rssi': 37, 'rfstatus_cntr': 0}
2019-10-30 19:01:50 DEBUG (MainThread) [incomfortclient] Heater(********429).status() = {'display_code': 0, 'display_text': 'opentherm', 'fault_code': None, 'is_burning': True, 'is_failed': False, 'is_pumping': True, 'is_tapping': False, 'heater_temp': 49.27, 'tap_temp': 32.82, 'pressure': 1.79, 'serial_no': '********429', 'nodenr': 38, 'rf_message_rssi': 37, 'rfstatus_cntr': 0}
2019-10-30 19:01:50 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=1, auth=None)
2019-10-30 19:01:51 DEBUG (MainThread) [incomfortclient] _get(url=data.json?heater=1): response = {'nodenr': 162, 'ch_temp_lsb': 128, 'ch_temp_msb': 24, 'tap_temp_lsb': 185, 'tap_temp_msb': 16, 'ch_pressure_lsb': 155, 'ch_pressure_msb': 0, 'room_temp_1_lsb': 255, 'room_temp_1_msb': 127, 'room_temp_set_1_lsb': 255, 'room_temp_set_1_msb': 127, 'room_temp_2_lsb': 255, 'room_temp_2_msb': 127, 'room_temp_set_2_lsb': 255, 'room_temp_set_2_msb': 127, 'displ_code': 102, 'IO': 10, 'serial_year': 19, 'serial_month': 5, 'serial_line': 15, 'serial_sn1': 0, 'serial_sn2': 97, 'serial_sn3': 28, 'room_set_ovr_1_msb': 0, 'room_set_ovr_1_lsb': 0, 'room_set_ovr_2_msb': 0, 'room_set_ovr_2_lsb': 0, 'rf_message_rssi': 28, 'rfstatus_cntr': 0}
2019-10-30 19:01:51 DEBUG (MainThread) [incomfortclient] Heater(********728).status() = {'display_code': 102, 'display_text': 'central heating', 'fault_code': None, 'is_burning': True, 'is_failed': False, 'is_pumping': True, 'is_tapping': False, 'heater_temp': 62.72, 'tap_temp': 42.81, 'pressure': 1.55, 'serial_no': '********728', 'nodenr': 162, 'rf_message_rssi': 28, 'rfstatus_cntr': 0}
2019-10-30 19:01:51 DEBUG (MainThread) [incomfortclient] Room(room_no=1) instantiated.
2019-10-30 19:01:51 DEBUG (MainThread) [incomfortclient] Room(1).status() = {'room_temp': 19.58, 'setpoint': 19.5, 'override': 19.0}

Thanks

zxdavb · 2019-10-30T21:20:41Z

Yes, just use the latest dev version of HA - it will be part of 102 beta when the time comes.

frenck added the integration: incomfort label Oct 29, 2019

probot-home-assistant bot assigned zxdavb Oct 29, 2019

zxdavb changed the title ~~Incomfort - Multiple heaters problem~~ Unable to select which heater is exposed via incomfort Oct 29, 2019

zxdavb changed the title ~~Unable to select which heater is exposed via incomfort~~ Unable to select which heater is exposed/used via incomfort Oct 29, 2019

prier4ever mentioned this issue Oct 29, 2019

Can't handle multiple heaters (limited to only first heater) jbouwh/incomfort-client#4

Closed

zxdavb mentioned this issue Oct 29, 2019

allow multiple heaters per incomfort gateway #28324

Merged

9 tasks

zxdavb closed this as completed in #28324 Oct 29, 2019

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Unable to select which heater is exposed/used via incomfort #28318

Unable to select which heater is exposed/used via incomfort #28318

prier4ever commented Oct 29, 2019 •

edited by zxdavb

Loading

probot-home-assistant bot commented Oct 29, 2019

zxdavb commented Oct 29, 2019 •

edited

Loading

zxdavb commented Oct 29, 2019

prier4ever commented Oct 29, 2019

zxdavb commented Oct 29, 2019 •

edited

Loading

prier4ever commented Oct 29, 2019

zxdavb commented Oct 29, 2019

zxdavb commented Oct 29, 2019

prier4ever commented Oct 30, 2019 •

edited

Loading

zxdavb commented Oct 30, 2019 •

edited

Loading

zxdavb commented Oct 30, 2019

prier4ever commented Oct 30, 2019 •

edited

Loading

prier4ever commented Oct 30, 2019 •

edited

Loading

zxdavb commented Oct 30, 2019

Unable to select which heater is exposed/used via incomfort #28318

Unable to select which heater is exposed/used via incomfort #28318

Comments

prier4ever commented Oct 29, 2019 • edited by zxdavb Loading

probot-home-assistant bot commented Oct 29, 2019

zxdavb commented Oct 29, 2019 • edited Loading

zxdavb commented Oct 29, 2019

prier4ever commented Oct 29, 2019

zxdavb commented Oct 29, 2019 • edited Loading

prier4ever commented Oct 29, 2019

zxdavb commented Oct 29, 2019

zxdavb commented Oct 29, 2019

prier4ever commented Oct 30, 2019 • edited Loading

zxdavb commented Oct 30, 2019 • edited Loading

zxdavb commented Oct 30, 2019

prier4ever commented Oct 30, 2019 • edited Loading

prier4ever commented Oct 30, 2019 • edited Loading

zxdavb commented Oct 30, 2019

prier4ever commented Oct 29, 2019 •

edited by zxdavb

Loading

zxdavb commented Oct 29, 2019 •

edited

Loading

zxdavb commented Oct 29, 2019 •

edited

Loading

prier4ever commented Oct 30, 2019 •

edited

Loading

zxdavb commented Oct 30, 2019 •

edited

Loading

prier4ever commented Oct 30, 2019 •

edited

Loading

prier4ever commented Oct 30, 2019 •

edited

Loading