New UI controls incomplete / not working

[phoenixtechnam]

Since HA update to 2023.12.0 my airconditioners based on IRHVAC cannot be controlled properly anymore. Target temperature is not displaying and cannot be be set via UI. See screenshot below:

[cociweb]

Similar to this:
home-assistant/frontend#18950

[phoenixtechnam]

yes, but the problem is not the missing modes, those can be added via additional card configuration. The real problem is that I cannot set target temperatures anymore. It also seems to mix up the current temperature and the target temperature.

[cociweb]

As You can see in the legacy ticket, the target temp. is also missing. (The 70F -next to the icon- should be the current temp.)

[cociweb]

well, I was aware to reproduce by a faulty formed json: if you are not initialize the temperature value, and the default value is null, then it can happen that you miss the +/- buttons and you are not able set the temp. <= Since you are not able to set any target temp, then you will get back null. :D - vicious circle...
As a workaround try to set it at least once with your IR remote, or send a correctly formed mqtt message for tasmota.

[cociweb]

According to this, there is another way of thinking in my mind...
What if....
if you are not able to set the temp by the thermostat card....
from your default configuration temperature should derive. Have you set default temperature in your yaml config? anyways, it should be set other than 'null' by default....
So 3 option can pops up:
a) the new thermostat card overwrites the default target_temp value with 'null'
b) the default values are not working somehow as here reported
c) somehow Tasmota returns 'null' value instead of None and it is not handled well here

Eg:

{"StateMode": "SendStore", 
....
"Power": "off", 
"Mode": "off", "
Celsius": "on", 
"Temp": null, 
"FanSpeed": "max",
"SwingV": "auto", 
"SwingH": "off", 
...}

Instead of:

{"StateMode": "SendStore", 
....
"Power": "off", 
"Mode": "off", "
Celsius": "on", 
"Temp": 25, 
"FanSpeed": "max",
"SwingV": "auto", 
"SwingH": "off", 
...}

Some developer opinion would be appreciated!

[phoenixtechnam]

According to this, there is another way of thinking in my mind... What if.... if you are not able to set the temp by the thermostat card.... from your default configuration temperature should derive. Have you set default temperature in your yaml config? anyways, it should be set other than 'null' by default.... So 3 option can pops up: a) the new thermostat card overwrites the default target_temp value with 'null' b) the default values are not working somehow as here reported c) somehow Tasmota returns 'null' value instead of None and it is not handled well here

Eg:

{"StateMode": "SendStore", 
....
"Power": "off", 
"Mode": "off", "
Celsius": "on", 
"Temp": null, 
"FanSpeed": "max",
"SwingV": "auto", 
"SwingH": "off", 
...}

Instead of:

{"StateMode": "SendStore", 
....
"Power": "off", 
"Mode": "off", "
Celsius": "on", 
"Temp": 25, 
"FanSpeed": "max",
"SwingV": "auto", 
"SwingH": "off", 
...}

Some developer opinion would be appreciated!

min_temp, max_temp and target_temp are all set in my config

[reloadxero]

here is what i did to restore functionality, you only have to do it once per entity:

1. In HA go to "Developer Tools"
2. Select "Services" tab
3. Select service "Climate: Set target temperature"
4. Select target climate entity and enter a temperature (any temperature is ok)
5. Hit "Call Service"

As soon as you make this service call the thermostat entity is going to get the target temperature information, the plus and minus buttons as well as full functionality.

[BigHomie90]

Thank you @reloadxero ! Even after HA restart, works as it should.

[phoenixtechnam]

Thank you @reloadxero, confirmed working

[Michel01975]

Thank you @reloadxero

[parcox]

here is what i did to restore functionality, you only have to do it once per entity:

1. In HA go to "Developer Tools"
2. Select "Services" tab
3. Select service "Climate: Set target temperature"
4. Select target climate entity and enter a temperature (any temperature is ok)
5. Hit "Call Service"

As soon as you make this service call the thermostat entity is going to get the target temperature information, the plus and minus buttons as well as full functionality.

Thank you @reloadxero, it's working. FYI, I have 3 tasmota-irhvac configured devices, one of them had this issue after HA 2024.2 update.