bconfig.c

#include <bcomp.h>

const bcomp_config_t bconfig = {
    0xEAEAEAEA,            // begin label
    CONFIGURATON_VERSION,  // version
    500000,                // CAN speed
    115200,                // UART speed
#if ( VIRTUINO_SUPPORT == 1 )
    0,                     // no EEPROM for Virtuino
#else
    16,                    // EEPROM size in kBit, standart 24LC64
#endif
    16,                    // default OLED contrast
    4,                     // start delay
    0,                     // start sound
    100,                   // t_engine default temperature warning
    115,                   // t_akpp default temperature warning
    14.5f,                 // v_max voltage warning
    12.3f,                 // v_min voltage warning
    3.33f,                 // fuel_coeff
    1.0f,                  // speed_coeff
    94056+4850,            // moto_dist_offset
    0,                     // moto_time_offset
    15000,                 // service distantion (default = 15000km, recommended 7500km)
    250,                   // service moto time (default = 250h, recommended 150h)
#if ( INSIDE_VERSION == 1 )
    1,
#else
    0,                     // 0 - OLED SSD1306, 1 - OLED SH1106
#endif
#if ( VIRTUINO_SUPPORT == 1 )
    0,                     // UART-logging off
#else
    1,                     // UART-logging on
#endif
    0,                   // res1
    0,                   // res2
#if ( INSIDE_VERSION == 1 )
    { 3700.0f, 313.15f, 1000.0f },  // Mitsubishi NMPS termistor
#else
    { 4300.0f, 298.15f, 10000.0f }, // EPCOS termistor
#endif
    0xAEAEAEAE,            // end label
};