gec

gec is a command-line utility written in Bash with convenience commands for using gocryptfs with git. It refrains from doing anything clever, making it possible to naively fallback to the underlying gocryptfs or git commands if a need should arise.

It transparently uses data encryption, both at rest and on the remotes. It uses version control and leverages redundant remote storage. The implemented remote commands require GitHub and Bitbucket. Git users will be at home with it.

⚠️ Before continuing, save the link to the official Gitee mirror of this repo.

Screenshot

Links

Caption	Link
Repo	https://github.com/impredicative/gec
Changelog	https://github.com/impredicative/gec/releases
Mirror	https://gitee.com/impredicative/gec

Limitations

The known applicable size limits for GitHub and Bitbucket are tabulated below. If a hard limit is violated during a commit, gec will attempt to check it and error early, otherwise a push will fail.

Size of	SI Value	Type	Enforcer	Action by `gec`
File	100M	Hard	GitHub	Error
Push	2G	Hard	GitHub	Error
Repo	5G	Soft	GitHub	(none)
File	1G	Hard	Bitbucket	(none)
Push	3.5G	Hard	Bitbucket	(none)
Repo	4G	Hard	Bitbucket	Error

Due to the use of the gocryptfs -sharedstorage option, a hardlink cannot be created in a decrypted repo.

Requirements

Linux is required along with a few tools which are covered in the Installation section.

A dedicated GitHub account and Bitbucket account is required with an identical username on both sites! If using Firefox, the Multi-Account Containers add-on can be very useful to separate them from your primary accounts on these sites.

Installation

These steps were tested on Ubuntu. On other distros, ensure that the executables are available in the PATH.

Ensure curl ≥7.74.0, git ≥2.25.1, jq ≥1.5:

sudo apt install curl git jq

Install gocryptfs ≥2.2.1:

RELEASE=$(curl https://api.github.com/repos/rfjakob/gocryptfs/releases | jq -r .[0].tag_name)
wget -qO- https://github.com/rfjakob/gocryptfs/releases/download/${RELEASE}/gocryptfs_${RELEASE}_linux-static_amd64.tar.gz | sudo tar -xz -f - -C /usr/local/sbin/ gocryptfs gocryptfs-xray

Install git-sizer ≥1.3.0:

VERSION=$(curl https://api.github.com/repos/github/git-sizer/releases | jq -r .[0].tag_name | tr -d v)
wget -qO- https://github.com/github/git-sizer/releases/download/v${VERSION}/git-sizer-${VERSION}-linux-amd64.zip | sudo busybox unzip - git-sizer -d /usr/local/sbin/
sudo chmod +x /usr/local/sbin/git-sizer

Install gec:

# Install program
RELEASE=$(curl https://api.github.com/repos/impredicative/gec/releases | jq -r .[0].tag_name)
sudo wget https://raw.githubusercontent.com/impredicative/gec/${RELEASE}/gec.sh -O /usr/local/sbin/gec
sudo chmod +x /usr/local/sbin/gec

# Install completion script if using Bash:
mkdir -p ~/.local/share/bash-completion/completions
wget https://raw.githubusercontent.com/impredicative/gec/${RELEASE}/completion.bash -O ~/.local/share/bash-completion/completions/gec
source ~/.local/share/bash-completion/completions/gec  # This is automatic if bash-completion is installed, but can do manually for current terminal only.

# Install completion script if using Fish:
mkdir -p ~/.config/fish/completions
wget https://raw.githubusercontent.com/impredicative/gec/${RELEASE}/completion.fish -O ~/.config/fish/completions/gec.fish
source ~/.config/fish/completions/gec.fish  # This is automatic, but can do manually for current terminal only.

For future updates to gec, running gec install will install its latest release and also its shell completion scripts.

Development

# Link program
git clone git@github.com:impredicative/gec.git
cd ./gec
sudo ln -s "${PWD}/gec.sh" /usr/local/sbin/gec

# Link completion script if using Bash:
mkdir -p ~/.local/share/bash-completion/completions
ln -s "${PWD}/completion.bash" ~/.local/share/bash-completion/completions/gec
source ~/.local/share/bash-completion/completions/gec  # This is automatic if bash-completion is installed, but can do manually for current terminal only.

# Link completion script if using Fish:
mkdir -p ~/.config/fish/completions
ln -s "${PWD}/completion.fish" ~/.config/fish/completions/gec.fish
source ~/.config/fish/completions/gec.fish  # This is automatic, but can do manually for current terminal only.

Setup

In the steps below, <owner> refers to an identical username in both GitHub and Bitbucket.

On each device:

Run gec config core.owner <owner> once for all future repos.
Run ssh-keygen -f ~/.ssh/id_gec once to create a new SSH key. Use and securely save a passphrase for this key to minimize the risk of any unauthorized push.
Add the ~/.ssh/id_gec.pub file for the key created above into the <owner> account in both GitHub and Bitbucket.

Create or prepend (not append) to ~/.ssh/config the specific contents:

Match host github.com,bitbucket.org exec "[[ $(git config user.name) = gec ]]"
    IdentityFile ~/.ssh/id_gec

Run chmod go-rw ~/.ssh/config to tighten permissions of the file as is advised in man ssh_config.
Run gec test.ssh to test GitHub and Bitbucket access via SSH, ensuring that the <owner> name is printed for both.
Run gec test.token to test GitHub and Bitbucket access via a personal access token for each. The GitHub token must have access to the repo and delete_repo scopes. The Bitbucket token must have access to the repository:read, repository:admin and repository:delete scopes.

Directories

Storage repos are created in ~/gec/. This location is created automatically. Both encrypted and decrypted repos and their files are organized in this location. Although this location is not currently configurable, a softlink or hardlink can be used to redirect it elsewhere if needed.

For each repo, these directories are created and used:

Location	Description
`~/gec/encrypted/<repo>`	git repo contents
`~/gec/encrypted/<repo>/.git`	.git directory of git repo
`~/gec/encrypted/<repo>/fs`	encrypted filesystem contents within git repo
`~/gec/decrypted/<repo>`	decrypted filesystem mountpoint

Workflow

To create and provision a new repo:

gec init <repo>
gec use <repo>
touch .Trash-${UID} (Avoids deleting files to Trash on Ubuntu)

To provision an existing repo:

gec clone <repo>

To use a provisioned repo, these are some of the many commands:

gec pull [<repo>] (If and when changed on remote)
gec use [<repo>] (Remember to exit the shell after using)
gec status [<repo>]
gec done <repo> "a non-secret commit message" (If files changed)
gec umount <repo>

Refer to the repo-specific commands section for details on using the commands in the workflows above.

Commands

Repo-agnostic

config <key> [<val>]: Get or set a value of key from configuration file ~/.gec. To list all values, specify -l.
install [<release>]: Update to the named or latest release of gec.
list: Alias of ls.
ls [pattern]: List the output of the state command for matching repos in ~/gec/encrypted. If specifying a pattern, it may need to be quoted.
lock: Unmount all mounted repos.
test.ssh: Test access to GitHub and Bitbucket via SSH.
test.token: Test access to GitHub and Bitbucket via a personal access token for each.

Repo-specific

In the commands below, <repo> refers to an identical repository name, e.g. "travel-ak", in both GitHub and Bitbucket. It can be auto-determined if a command is run from its encrypted or decrypted directory. When it can be auto-determined, to disambiguate a command's arguments that follow, it can alternatively be specified as a period.

The minimally relevant repo-specific commands are listed in the Workflow section.

Informational

check.dec [<repo>]: Check decrypted file sizes. Error if a size limit is exceeded. The repo must be in a mounted state. It is run automatically by commit when needed if mounted.
check.git [<repo>]: Check encrypted file sizes, and use git-sizer to check the size of the git repo. Error if a size limit is exceeded. It is run automatically by commit when needed.
du [<repo>]: Print the human-friendly disk usage of the git repo directory for a depth of one.
du.dec [<repo>]: Print the human-friendly disk usage of the decrypted directory for a depth of one. The repo must be in a mounted state.
du.enc [<repo>]: Print the human-friendly disk usage of the encrypted filesystem directory for a depth of one.
info [<repo>]: Alias of status.
log [<repo>] [options]: Print the git log for the last ten commits. Options, if any, are forwarded to git log. If specifying any options, to auto-determine <repo>, specify a period in its place.
logs [<repo>]: Alias of log.
state [<repo>]: Print the repo mount state, .git directory disk usage, encrypted filesystem directory disk usage, total disk usage, and repo name.
status [<repo>]: Print the repo name, mount state, and short git status. If mounted, also print the change status of decrypted paths plus the mount information.

Remote oriented

A GitHub token and a Bitbucket token are required for these commands. For your security, the tokens are not saved by gec.

create <repo>: Idempotently create the repo in GitHub and Bitbucket. The required GitHub token must have access to the repo scope. The required Bitbucket token must have access to the repository:read and repository:admin scopes.
del [<repo>]: Delete an existing repo in GitHub and Bitbucket. The required GitHub and Bitbucket tokens must have access to their delete_repo and repository:delete scopes respectively. Also see the rm and destroy commands.

git oriented

amend [<repo>] ["<commit_msg>"]: Add and amend all changes to most recent commit. If <commit_msg> is not specified, it is kept unchanged. <commit_msg> is not encrypted. To auto-determine <repo>, specify a period in its place.
clone <repo>: Clone and configure a preexisting repo from GitHub into its git repo directory, and add its Bitbucket URL.
commit <repo> "<commit_msg>": Add and commit all changes. <commit_msg> is not encrypted. To auto-determine <repo>, specify a period in its place.
gc [<repo>] [options]: Run git garbage collection on the repo. Options, if any, are forwarded to git gc. If specifying any options, to auto-determine <repo>, specify a period in its place.
pull [<repo>]: Pull commits from remote. For safety, only a fast-forward pull is made, and a prerequisite is that the repo must be in a dismounted state.
push [<repo>]: Push commits to remote.
reset.url [<repo>]: Update the locally configured remote URLs for the repo to the expected ones for GitHub and Bitbucket, removing all other URLs.
send <repo> "<commit_msg>": (commit+push) Add, commit, and push all changes. <commit_msg> is not encrypted. To auto-determine <repo>, specify a period in its place. Also see the done command.

gocryptfs oriented

dismount: Alias of umount.
init.fs [<repo>]: Initialize the encrypted filesystem for an empty repo. No commit or push is made. A new password is requested. The password and a printed master key must be securely saved.
mount [<repo>]: Mount a repo in read-write mode into its decrypted mountpoint if not already mounted as such. Also see the use command.
mount.ro [<repo>]: Mount a repo in read-only mode into its decrypted mountpoint if not already mounted as such. Also see the use.ro command.
mount.rw: Alias of mount. Also see the use.rw command.
umount [<repo>] [-f]: Unmount a repo if it is mounted. To force an unmount, specify -f.
unmount: Alias of umount.

System

rm <repo>: Interactively remove all local directories of the repo. Also see the del and destroy commands.
shell [<repo>]: Provide a shell into the git repo directory.
shell.dec [<repo>]: Provide a shell into the decrypted mountpoint of a mounted repo.
shell.enc [<repo>]: Provide a shell into the encrypted filesystem directory.

Compound

init <repo>: (create+clone+init.fs+send) Create new repo remotely, clone it locally, initialize encrypted filesystem, commit, and push. A new password is requested. The password and a printed master key must be securely saved. The required GitHub token must have access to the repo scope. The required Bitbucket token must have access to the repository:read and repository:admin scopes.
destroy <repo>: (rm+del) Interactively remove all local repo directories, and delete repo from GitHub and Bitbucket.
done <repo> "<commit_msg>": (check.dec+umount+send) Add, commit, and push all changes. Unmount repo if mounted. <commit_msg> is not encrypted. To auto-determine <repo>, specify a period in its place.
rename <repo> <new_name>: Rename repo remotely and locally, and update its locally configured remotes. The repo must be in a dismounted state. The new name must not already be in use. The required GitHub and Bitbucket tokens must have access to their repo and repository:admin scopes respectively. After renaming, remember to store the password for the repo under its new name.
use [<repo>]: (mount+shell.dec) Mount read-write if not already mounted as such, and provide a shell into the decrypted mountpoint.
use.ro [<repo>]: (mount.ro+shell.dec) Mount read-only if not already mounted as such, and provide a shell into the decrypted mountpoint.
use.rw: Alias of use.

Migration

If updating from v0.4, first verify the Setup steps.

Next, for each repo:

If it exists remotely but not locally, obtain it using gec clone <repo>.
Check its repo size as printed by gec check.git <repo>.

If the repo size is ≤4.0G, run this sequence once:

gec shell <repo>  # Enters repo shell
gec create  # Creates repo in Bitbucket.
gec reset.url  # Adds Bitbucket remote and removes obsolete remote.
gec push  # Pushes to Bitbucket.
exit  # Exits repo shell.

If gec push fails with the push size exceeding 2G, run an alternative command instead such as the one below to push commits individually. At this time, ignore errors about failing to push commits to GitHub.
```
git log --format=%H --reverse | xargs -i git push origin {}:refs/heads/$(git branch --show-current)
```
If the repo size is >4.0G, it cannot be migrated. One or more new repos can however be created to replace it. In each new repo, limit each push to a max of 2G.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

gec

Contents

Screenshot

Links

Limitations

Requirements

Installation

Development

Setup

Directories

Workflow

Commands

Repo-agnostic

Repo-specific

Informational

Remote oriented

git oriented

gocryptfs oriented

System

Compound

Migration

Files

README.md

Latest commit

History

README.md

File metadata and controls

gec

Contents

Screenshot

Links

Limitations

Requirements

Installation

Development

Setup

Directories

Workflow

Commands

Repo-agnostic

Repo-specific

Informational

Remote oriented

git oriented

gocryptfs oriented

System

Compound

Migration