In this section we will setup the CoreMini file that we will be loading into the neoECU, which is going to take 4 analog inputs that we will assign to signals in an HS CAN transmit message. We will later log and decode these signals.
- Setup one HS CAN transmit messages, with 4 signals.
- Create a function block script that will set each signal value into an analog input. Then transmit the messages. For help working with the analog inputs on a neoECU 10, see the IO map for the neoECU 10.
- Save this file as (your name)ECUCoreMini.vs3
- Load this CoreMini into the neoECU device. (For help on this topic see the neoECU 10 Script loading. If you are using a different neoECU device try this link.)