New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[Controller Request] Stadia Controller in Bluetooth Mode #224
Comments
Which Minecraft Version and which Controlify version are you using? This is what I'm currently using:
|
Hello!
|
For me there was only one recalibration needed at the first start with the new controller. Does anybody know how we can adjust the controller configs, such that vibration is enabled? |
I got the controller fully working, including vibration. Turns out that the linux kernel only recently got full support for the controller and any version below 6.6 is using the generic HID module. I switched my Debian system to the testing repos which gave me kernel 6.6 but apparently debian doesn't include the stadia controller module by default. Here's how I built it, YMMV:
After all that the controller should just work. When you connect it, you should see lines like this in dmesg:
Sidenote, before all this the controller was already working fine, albeit without haptics. Only needed calibration once and all the buttons were 1:1 with the UI. |
Another thing you can try is joining my discord server (https://short.isxander.dev/discord) and trying out the latest test build (find it in the forum). It upgrades the native library used that may help with controller compatibility. |
Controller name
Stadia Controller in Bluetooth mode
Controller VID & PID
Stadia Controller'#0-gamepad (000018d1, 00009400: Stadia Controller
Additional Information:
This controller does seem to be fully supported in wired mode (with rumble and correct button art). However, when connecting via Bluetooth, there are a few issues:
Relevant Log Entries:
The text was updated successfully, but these errors were encountered: