You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository has been archived by the owner on Nov 4, 2023. It is now read-only.
Hi, I tried every configuration and read all the issue but still doesn't work
Every time I need to push pairing button on the desk to seen the green light (connected) on the card on home assistant
After that when I try to move the desktop this is the log
[esp32_ble_tracker:180]: Starting scan...
[ble_client:045]: Found device at MAC address [my desk mac address]
[ble_client:083]: Attempting BLE connection to [my desk mac address]
[ble_sensor:033]: [Desk Height] Connected successfully!
[ble_sensor:033]: [Desk Speed] Connected successfully!
[binary_sensor:036]: 'Desk Connection': Sending state ON
[ble_client:159]: Service UUID: 0x1800
[ble_client:160]: start_handle: 0x1 end_handle: 0x9
[ble_client:339]: characteristic 0x2A00, handle 0x3, properties 0xa
[ble_client:339]: characteristic 0x2A01, handle 0x5, properties 0x2
[ble_client:339]: characteristic 0x2A04, handle 0x7, properties 0x2
[ble_client:339]: characteristic 0x2AA6, handle 0x9, properties 0x2
[ble_client:159]: Service UUID: 0x1801
[ble_client:160]: start_handle: 0xa end_handle: 0xd
[ble_client:339]: characteristic 0x2A05, handle 0xc, properties 0x20
[ble_client:159]: Service UUID: 99FA0001338A10-248A-4900-9C02-15F78A
[ble_client:160]: start_handle: 0xe end_handle: 0x13
[ble_client:339]: characteristic 99FA0002338A10-248A-4900-9C02-15F78A, handle 0x10, properties 0xc
[ble_client:339]: characteristic 99FA0003338A10-248A-4900-9C02-15F78A, handle 0x12, properties 0x12
[ble_client:159]: Service UUID: 99FA0010338A10-248A-4900-9C02-15F78A
[ble_client:160]: start_handle: 0x14 end_handle: 0x17
[ble_client:339]: characteristic 99FA0011338A10-248A-4900-9C02-15F78A, handle 0x16, properties 0x1e
[ble_client:159]: Service UUID: 99FA0020338A10-248A-4900-9C02-15F78A
[ble_client:160]: start_handle: 0x18 end_handle: 0x1f
[ble_client:339]: characteristic 99FA0021338A10-248A-4900-9C02-15F78A, handle 0x1a, properties 0x12
[ble_client:339]: characteristic 99FA0029338A10-248A-4900-9C02-15F78A, handle 0x1d, properties 0x2
[ble_client:339]: characteristic 99FA002A338A10-248A-4900-9C02-15F78A, handle 0x1f, properties 0x2
[ble_client:159]: Service UUID: 99FA0030338A10-248A-4900-9C02-15F78A
[ble_client:160]: start_handle: 0x20 end_handle: 0xffff
[ble_client:339]: characteristic 99FA0031338A10-248A-4900-9C02-15F78A, handle 0x22, properties 0xc
[esp32_ble_tracker:180]: Starting scan...
[ble_client:170]: No descriptor found for notify of handle 0x1a
Here my configuration
esphome:
name: esp32deb2
platform: ESP32
board: esp32dev
esp32_ble_tracker:
globals:
# To store the Desk Connection Status
- id: ble_client_connected
type: bool
initial_value: 'false'
ble_client:
- mac_address: "My desk mac address"
id: idasen_desk
on_connect:
then:
# Update the Desk Connection Status
- lambda: |-
id(ble_client_connected) = true;
- delay: 5s
# Update desk height and speed sensors after bluetooth is connected
- lambda: |-
id(desk_height).update();
id(desk_speed).update();
on_disconnect:
then:
# Update the Desk Connection Status
- lambda: |-
id(ble_client_connected) = false;
sensor:
# Desk Height Sensor
- platform: ble_client
ble_client_id: idasen_desk
id: desk_height
name: 'Desk Height'
service_uuid: '99fa0020-338a-1024-8a49-009c0215f78a'
characteristic_uuid: '99fa0021-338a-1024-8a49-009c0215f78a'
icon: 'mdi:arrow-up-down'
unit_of_measurement: 'cm'
accuracy_decimals: 1
update_interval: never
notify: true
lambda: |-
uint16_t raw_height = ((uint16_t)x[1] << 8) | x[0];
unsigned short height_mm = raw_height / 10;
return (float) height_mm / 10;
# Desk Speed Sensor
- platform: ble_client
ble_client_id: idasen_desk
id: desk_speed
name: 'Desk Speed'
service_uuid: '99fa0020-338a-1024-8a49-009c0215f78a'
characteristic_uuid: '99fa0021-338a-1024-8a49-009c0215f78a'
icon: 'mdi:speedometer'
unit_of_measurement: 'cm/min' # I'm not sure this unit is correct
accuracy_decimals: 0
update_interval: never
notify: true
lambda: |-
uint16_t raw_speed = ((uint16_t)x[3] << 8) | x[2];
return raw_speed / 100;
binary_sensor:
# Desk Bluetooth Connection Status
- platform: template
name: 'Desk Connection'
id: desk_connection
lambda: 'return id(ble_client_connected);'
# Desk Moving Status
- platform: template
name: 'Desk Moving'
id: desk_moving
lambda: 'return id(desk_speed).state > 0;'
# Enable logging
logger:
# Enable Home Assistant API
api:
ota:
password: "e9ec71a7e3c7ee62f43657bcf891d980"
wifi:
ssid: "my ssid"
password: "my psw"
fast_connect: true
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Esp32Deb2 Fallback Hotspot"
password: "H8L6h0RhHT01"
captive_portal:
The text was updated successfully, but these errors were encountered:
Hi, I tried every configuration and read all the issue but still doesn't work
Every time I need to push pairing button on the desk to seen the green light (connected) on the card on home assistant
After that when I try to move the desktop this is the log
Here my configuration
The text was updated successfully, but these errors were encountered: