-
Notifications
You must be signed in to change notification settings - Fork 36
retrieveDescriptors(): esp_ble_gattc_get_all_descr: Unknown #7
Comments
I would recommend you to play with your table using BT tools like https://github.com/jnross/Bluetility . static BLEUUID outputServiceUUID("99fa0020-338a-1024-8a49-009c0215f78a");
static BLEUUID outputCharacteristicUUID("99fa0021-338a-1024-8a49-009c0215f78a");
static BLEUUID inputServiceUUID("99fa0030-338a-1024-8a49-009c0215f78a");
static BLEUUID inputCharacteristicUUID("99fa0031-338a-1024-8a49-009c0215f78a");
static BLEUUID controlServiceUUID("99fa0001-338a-1024-8a49-009c0215f78a");
static BLEUUID controlCharacteristicUUID("99fa0002-338a-1024-8a49-009c0215f78a"); |
Hi! I'm having similar issues with the official Linak Bluetooth adapter (BLE2LIN). Product Link Here's the logs before it reboots.
After the reboot before running setup and crashing with stack overflow again (loops until it goes into safe-mode). Also not sure why it thinks it's 2016..
Also I noticed this warning during compiling if it's relevant.
Any linux or windows alternatives to Bluetility to check services and characteristics? |
Hi @IhorSyerkov and in text with some manual screen capture and copy paste...
|
@hsolberg |
It seems to crash when retrieving the control characteristic while it is available in your logs
I don't really know how to help you on this issue |
@j5lien This NodeJS Module worked for me, but that requires a Raspberry Pi or similar to run it, I would much prefer to use an ESP32 instead. Maybe there's some logic/handling there that might be of use? Here's the same info as @ACrazyConcept just for the official Linak Bluetooth adapter (BLE2LIN) if that helps at all (i only removed the mac-address). If this doesn't help at all, is it possible to add additional logging to uncover more details that might help?
|
On the latest release, I added an option to use different bluetooth control commands. Does it fix your issues ? |
It does not crash anymore, but it won't connect to my desk:
I tried this config:
and this config: https://github.com/j5lien/esphome-idasen-desk-controller/blob/main/README.md#extra-desk-informations |
Logs are coming from from the 1.x release of this component. Try to use the last one https://github.com/j5lien/esphome-idasen-desk-controller/releases/tag/v2.1.0 |
My configuration contains
so this should be the latest version 🤔 |
Yes it's the latest. Could tried to set up only the height sensor like I explain here #25 (comment) without using the custom component ? Do you still get connection issue ? |
Yes, see attached logs. Looks like it connects but then disconnects immediately. Web UI does not show a height value.
removed MAC addresses for privacy |
Hi
I am trying to use this with a Linak GPD1M. I figured the control would be similar enough to have it work. But I get the following error with very minor variations and it never gets past this point:
The text was updated successfully, but these errors were encountered: