Unofficial speed controller for EasyHome Hygro Premium SP via web. It exposes an API REST server with a simple frontend in order to control the current speed.
- Raspberry PI
- Up to 7 relays
- Software: pip
- Development Software: pip, node, yarn
We need to interface our Raspberry PI to the EasyHome Hygro card through relays. There are currently two types of configurations available:
- With normal relays. When the Raspberry PI has not started is in
QUIET
speed. - With solid state relays.
NOTE: If you want to shut down the EasyHome Hygro when the Raspberry PI has not started with normal relays use the solid state configuration.
sudo pip install hygro-premium-sp-server
Run the command hygro-premium-sp-server
.
If do you prefer to have it in a background process you can run as nohup hygro-premium-sp-server &
It will open a web frontend in Raspberry PI at port 21000. It exposes an API rest too in the same port.
{
"speeds": ["quiet", "normal", "maximum"],
"available_speeds": ["quiet", "maximum"],
"current": {
"speed": "maximum",
"ratio": 1.00,
"real_ratio": 1.00
}
}
{
"velicity_ratio": 1.00,
"product": "default"
}
{
"velocity_ratio": 0.54,
"velocity_percentage": 66,
"velocity": "quiet",
"product": "default"
}
[1] Page 36: https://www.aldes-international.com/img/2019/10/Gamme_EasyHOME_Tech_Corp_En_2_HD.pdf