fpa_dataset.bt

//--------------------------------------
//--- 010 Editor Binary Template
//
// File:        fpa_dataset.bt
// Author:      MQB-coding
// Revision:    9999
// Purpose:     VAG MQB FPA (fahrprofilauswahl / driving profile) dataset parsing
// Comments:    red = unknown, yellow = possible, green = sure, gray = doesn't look very relevant.
//              Currently only useful for FPA datasets for 3Q0907530Q and newer.
//--------------------------------------
OutputPaneClear();
local int groupsMatrixControlsArray[64];

local int mk7 = (FileSize() == 0x1100 ? 1 : 0);

BitfieldDisablePadding();
BigEndian();
char dataset_version[4]       <format=hex,bgcolor=cGreen,comment="Version">; // something like J1 00
// Anything older than version IA seems to be a different format.
// second part of the version is always 00

//ubyte header1[10] <bgcolor=cRed>;
struct{
    byte header_04; // always 64
    byte year <read=Str("%lg", this+2010), bgcolor=cGreen>;
    byte header_06 <bgcolor=cDkGray>; // always 00
    byte header_07; // always 0a
    byte header_08; // 00 or 1e. Always 00, except with LA, LE, LG, LI, LK, LO
    byte header_09; // 1, 0 or ff. FF is used on Audi Datasets. 0 is used on the datasets that are marked "with eco button".
    byte header_0A; // 0, 1 or 6. 6 is used on the datasets that are marked "with eco button".
    byte header_0B; // 0, 3, 14, 32 or 0A . No idea what this is. 3 is used on the datasets that are marked "with eco button".
    byte header_0C; // 0A or 0F. 0A only seems to be used with Tiguan datasets?
    byte header_0D; // always 01
} header1;


struct{
    byte header_0E; //always F4
    byte header_0F; // 0, 2 or 6. 2 only used in NOFPA_DS JC00. 0 is used in the datasets that are marked by 1e in byte 8 of header1
    byte header_10 <bgcolor=cDkGray>; // always 00
    byte header_11 <bgcolor=cDkGray>; // always 00
    byte header_12; // 4 or 7. 4 is used in LA, LE, LG, LI, LK, LO, TA, TB, TC, TK.
    byte header_13; // 0, 2 or 4. Audi datasets use 0 or 4. 2 is used by all others.
    byte header_14; // 0, 1 or 2. 1 is used on the datasets that are marked "with eco button".
    byte header_15; // 0, 1 or 2
    byte header_16; // 0, 14 or 1e. Audi datasets use 0 or 1e.
    byte header_17 <bgcolor=cDkGray>; // always 0
} header2;


// From here it appears to be some kind of table, 32 rows, 15 colums, or something like that.
// it appears to override the request values before they are sent to a control module
FSeek(38);
struct{
    struct{
        ubyte value_B:4<bgcolor=cDkGreen>;
        ubyte value_A:4<bgcolor=cGreen>;
        }group_children_request_values_x [15]<optimize=true>;
}group_children_request_values[32]<optimize=true>;

// findings so far:
// on these datasets, the controls line up with their respective position in list_of_grouped_controls:
// IB (Golf 2019)
// J6 (Tiguan 2019)
// JA (Golf R 310)
// JD (Golf Standard)
// N1 (A3 tdi 2018)
// OC (Magotan 2021 with DCC Slider)
// OS (GTI 2021)
// OY


// looks like they match:
// M9 (Octavia 2019)
// MJ (Superb 2020)


// on these datasets, they don't:
// LI (Leon FR 2020)
// LK (Leon Cupra 300)
// LO (Leon Cupra)
// O2 (Magotan 2021 GTE)




FSeek(518);
ubyte group_member_request_values_controls[8] <bgcolor=cDkGreen,name=getControlName>;
ubyte amount_of_members_per_group[8] <bgcolor=cGreen>;


// these are the names of the groups.
// examples:

// IB   21 FF FF FF FF FF FF FF 04          - 1 group, 4 controls
// J6   21 FF FF FF FF FF FF FF 04          - 1 group, 4 controls
// JA   21 24 FF FF FF FF FF FF 03 02       - 2 groups, 3+2 controls
// JD   21 FF FF FF FF FF FF FF 04          - 1 group, 4 controls
// N1   03 0A FF FF FF FF FF FF 04 03       - 2 groups, 4 controls, 3 controls
// OC   21 24 FF FF FF FF FF FF 04 02       - 2 groups, 4 controls, 2 controls
// OS   21 FF FF FF FF FF FF FF 04          - 1 group, 4 controls
// OY   21 24 FF FF FF FF FF FF 04 02       - 2 groups, 4 + 2 controls

// LI   01 FF FF FF FF FF FF FF 05          - 1 group, 5 controls
// LK   01 FF FF FF FF FF FF FF 06          - 1 group, 6 controls
// LO   01 FF FF FF FF FF FF FF 07          - 1 group, 7 controls
// O2   00 FF FF FF FF FF FF FF FF          - no groups
// PF   21 24 07 FF FF FF FF FF 03 02 02    - 3 groups, 3+2+2 controls
// Having 3+2+2 in dataset PF rules out that this is anything other than group size.

ubyte reserved_for_future_use[32] <bgcolor=cDkGray, hidden=true>; // always zeroes
// these determine specifically which controls are set in the group member matrix.
long members_in_group_[4]<read=getGroupMemberLongCodingByteName, bgcolor=cGreen>;
// Known values:

// sets with 1 group
// IB:      4018 0000 0000 0000             1 group: 4 controls
// J6:      4018 0000 0000 0000             1 group: 4 controls
// JC:      1000 0010 0000 0000             1 group: 2 controls
// LI:      4018 0000 0000 0000             1 group: 7 controls   
// LK:      4018 0000 0000 0000             1 group: 6 controls
// OS:      4018 0000 0000 0000             1 group: 4 controls

// sets with 2 groups
// M9:      401C 0000 2001 0000             2 groups: 4 controls, 2 controls
// OC:      4018 0080 2000 0000             2 groups: 4 controls, 2 controls
// OY:      4018 0080 2000 0000             2 groups: 4 controls, 2 controls

// sets with 3 grOups
// PF:      4018 0080 2000 0000 0080        3 groups: 3 controls, 3 controls, 2 controls 

// sets without groups
// J4:      0000 0000 0000 0000
// KN:      0000 0000 0000 0000
// O2:      0000 0000 0000 0000
// O3:      0000 0000 0000 0000
// ON:      0000 0000 0000 0000
// OO:      0000 0000 0000 0000
// P4:      0000 0000 0000 0000

// Audi, so different logic:
// N1:      0010 0080 2001 0000

ubyte reserved_for_future_use_2[80] <bgcolor=cDkGray, hidden=true>; // always zeroes




ushort function_bytes_settings_shifted_by_1_bit[30] <hidden=true>; // name isn't accurate, but this value is only used for print
FSeek(662);
struct {
    ubyte allowed_to_change_in_evoff: 1             <read = getYesNo>;
    ubyte allowed_to_change_in_hybridarea: 1        <read = getYesNo>;
    ubyte allowed_to_change_in_hybridcharge: 1      <read = getYesNo>;
    ubyte allowed_to_change_in_hybridhold: 1        <read = getYesNo>;
    ubyte allowed_to_change_in_offroadindividual: 1 <read = getYesNo>;
    ubyte allowed_to_change_in_snow: 1              <read = getYesNo>;
    ubyte allowed_to_change_in_lift: 1              <read = getYesNo>;
    ubyte allowed_to_change_in_clubsport: 1         <read = getYesNo>;

    ubyte allowed_to_change_in_notset: 1            <read = getYesNo>;
    ubyte allowed_to_change_in_ecoplus: 1           <read = getYesNo>;
    ubyte allowed_to_change_in_race: 1              <read = getYesNo>;
    ubyte allowed_to_change_in_eco: 1               <read = getYesNo>;       
    ubyte allowed_to_change_in_offroad: 1           <read = getYesNo>;
    ubyte allowed_to_change_in_sport: 1             <read = getYesNo>;
    ubyte allowed_to_change_in_normal: 1            <read = getYesNo>;
    ubyte allowed_to_change_in_comfort: 1           <read = getYesNo>;
    } control_is_allowed_to_change[30]               <bgcolor=cGreen,optimize=true>; 
ushort function_bytes_settings[30] <comment=getFunctionByteSettingName,hidden=true>;// name isn't accurate, but this value is only used for print

FSeek(722);
struct {
    ubyte remember_after_reset_in_evoff: 1             <read = getYesNo>;
    ubyte remember_after_reset_in_hybridarea: 1        <read = getYesNo>;
    ubyte remember_after_reset_in_hybridcharge: 1      <read = getYesNo>;
    ubyte remember_after_reset_in_hybridhold: 1        <read = getYesNo>;
    ubyte remember_after_reset_in_offroadindividual: 1 <read = getYesNo>;
    ubyte remember_after_reset_in_snow: 1              <read = getYesNo>;
    ubyte remember_after_reset_in_lift: 1              <read = getYesNo>;
    ubyte remember_after_reset_in_clubsport: 1         <read = getYesNo>;

    ubyte remember_after_reset_in_ecoplus: 1           <read = getYesNo>;
    ubyte remember_after_reset_in_race: 1              <read = getYesNo>;
    ubyte remember_after_reset_in_eco: 1               <read = getYesNo>;       
    ubyte remember_after_reset_in_offroad: 1           <read = getYesNo>;
    ubyte remember_after_reset_in_sport: 1             <read = getYesNo>;
    ubyte remember_after_reset_in_normal: 1            <read = getYesNo>;
    ubyte remember_after_reset_in_comfort: 1           <read = getYesNo>;
    ubyte remember_after_reset_in_notset: 1            <read = getYesNo>;

    }control_is_reset[30]               <bgcolor=cDkGreen,optimize=true>; 

byte restart_value[30] <format=hex, bgcolor=cGreen, name=getSettingName>;
// this is the default value after restart  

byte unknown_value_32C <bgcolor=cDkGray,hidden=true>;
// tested different values, doesn't seem to do anything
// seems to be 0 always


// enabled profiles start here
ubyte FPA_profile[12] <format=hex,bgcolor=cGreen,name=getFPAName>;
// changing this will changes what button is shown in the FPA selection screen.
// these bytes determine what profile button is used in what position
// for instance:
// Put "04" into profile_1, and it will display as Offroad.

ubyte profile_returns_after_restart[12] <format=hex,bgcolor=cGreen, name=getFPAName>;
// This determines what profile position it returns to after restarting the car.

struct{
    ubyte allow_return_to_evoff: 1             <read = getYesNo>;
    ubyte allow_return_to_hybridarea: 1        <read = getYesNo>;
    ubyte allow_return_to_hybridcharge: 1      <read = getYesNo>;
    ubyte allow_return_to_hybridhold: 1        <read = getYesNo>;
    ubyte allow_return_to_offroadindividual: 1 <read = getYesNo>;
    ubyte allow_return_to_snow: 1              <read = getYesNo>;
    ubyte allow_return_to_lift: 1              <read = getYesNo>;
    ubyte allow_return_to_clubsport: 1         <read = getYesNo>;

    ubyte allow_return_to_individual: 1        <read = getYesNo>;
    ubyte allow_return_to_race: 1              <read = getYesNo>;
    ubyte allow_return_to_eco: 1               <read = getYesNo>;       
    ubyte allow_return_to_offroad: 1           <read = getYesNo>;
    ubyte allow_return_to_sport: 1             <read = getYesNo>;
    ubyte allow_return_to_normal: 1            <read = getYesNo>;
    ubyte allow_return_to_comfort: 1           <read = getYesNo>;
	ubyte allow_return_to_notset: 1            <read = getYesNo>;   

} allow_return_to_profile <optimize=false, bgcolor=cGreen>;
// this determines whether or not it's allowed to return to a given profile upon reset.

byte profile_0_nodata[30] <bgcolor=cDkGray, hidden=true>;
// tested with different values here, doesn't seem to do anything


struct{
    // refer to FPA_controls for the meaning of each byte number
    byte setting_byte[30] <bgcolor=cDkGreen, comment=getSettingName, open=true, format=hex>;
}profile[12];
// the driving profiles as they are displayed underneath the (i) icon in the HMI.



byte list_of_grouped_controls[30]<format=hex,bgcolor=cGreen, name=getControlName>; 
// The value of this determines what value is used in the profiles for instance, 
// if there's a value 01 on the first position, that means the first value in the 
// profile sets this specific setting.
// This list is what's actually shown in the User Interface, and it can represent a group of controls.
// See list_of_controls for all the ungrouped controls
// NEVER PUT FF HERE
struct{
    // this block consists of 30 bytes, after that the same pattern can be found, once for each enabled profile.
    // so there will be data for profile 1, 2, 3, but the 4th set of data here will be filled with zeroes when it's not used.
    // the 6th profile is used as "individual", so it has additional settings.
    ushort individual_setting_byte[30] <comment=getIndividualSettingName,open=true, bgcolor=cDkGreen> ;
} settings_shown_in_HMI[12];

// button section starts here
byte unknown_7BB[2] <bgcolor=cRed>; 
// almost always 00 00 , except on KV, N1, N8: Audi firmwares.
// there it's 00 FF

ubyte button_type[5] <bgcolor=cDkGreen>;
// 0 = disabled
// 1 = push button
// 4 = ?
// 5 = knob
// 6 = ? O(occurs on MZ)
// 254 = steering wheel long push   11111110
// 253 = steering normal push       11111101
// FD  on Tiguan R (has enabled steering wheel FPA buttons)
// FE  on Tiguan R (has enabled steering wheel FPA buttons)
// TODO: test 5th byte if it is doing anything or if it's ignored and is just a filler byte

ubyte button_behavior[5] <bgcolor=cYellow>;
// 0 = disabled
// 1 = enabled
// 4 = can rotate in 2 directions?
// there are 4 bytes, because there's room for 4 buttons. Maybe even 5, not sure yet.
// TODO: test 5th byte if it is doing anything or if it's ignored and is just a filler byte
// TODO: test other values

 
byte button_action[5] <bgcolor=cDkYellow>;
// 01 = button press cycles through the modes
// 03 = only open FPA dialog, no selection by button
// 05 = ? (occurs on MZ00)
// TODO: test other values like 2, 4, 5, 6.
// again, for each of the 4 buttons.


byte cycling_through_modes[5] <bgcolor=cGreen>;
// 00 = nothing 
// 01 = there's no loop
// 03 = loop through all the modes over and over again
// again, for each of the 4 buttons.


ubyte button_profile_list_number[5]<bgcolor=cDkGreen >;
// the number determines the list of profiles to cycle through


struct {
    ubyte list_0_unknown_property: 4;
    ubyte list_0:4 <bgcolor=cLtGreen, name=(this == 0 ? "None" : getFPAName(FPA_profile[this-1]))>;
    
    ubyte list_1_unknown_property: 4;
    ubyte list_1:4 <bgcolor=cGreen, name=(this == 0 ? "None" : getFPAName(FPA_profile[this-1]))>;
    
    ubyte list_2_unknown_property: 4;
    ubyte list_2:4 <bgcolor=cGreen, name=(this == 0 ? "None" : getFPAName(FPA_profile[this-1]))>;
    
    ubyte list_3_unknown_property: 4;
    ubyte list_3:4 <bgcolor=cDkGreen, name=(this == 0 ? "None" : getFPAName(FPA_profile[this-1]))>;
} button_profile_lists[8] <optimize=true>;

struct {
// these 8 sets of 4 hold the 8 profiles you can choose from, depending on what list is selected by button_profile_list_number
// the numbers in this list refer to the entry in FPA_profile[12], so the possible (decimal) values are as follows:
// 0 = disabled
// 1 to 12 = reference to the profile in FPA_profile
// 221: ?
// 232: ?
// 241: seen on steering wheel button setups
// The logic for these higher numbers isn't clear yet.
// These values are highly probable to be split bytes.
// Todo: find out that's the logic behind this.

    
    // the following need more research.
    ubyte unknown_button_data_7F6[4] <bgcolor=cYellow>;
    // known (dec) values:
    // 0
    // 1
    // 2
    // 5
    // 3rd and 4th are always 00
    
    ubyte unknown_button_data_7FA[4]<bgcolor=cDkYellow>;
    // known (dec) values:
    // 0
    // 2
    // 3
    // 6
    // 9
    // 12
    
    
    
    ubyte unknown_button_data_7FE[4]<bgcolor=cRed>;
    // 0x7FE:
    // 1st and 3rd byte always 0. Are these SHORT values instead of bytes?
    // known (dec) values for 2nd byte:
    // 2    most datasets, on the 2nd byte
    // 4    on J7 and OT, which both have an eco button
    // 16   on KN
    // 18   on MZ
    // 26   on J4
    // 34   on KV
    // 
    // known (dec) values for 4th byte:
    // 2
    // 6
    // 18
    // 22
    // 23
    // 66
    
    
    
    ubyte unknown_button_data_802[4]<bgcolor=cLtRed>;
    // 0x802:
    // 1st, 3rd and 4th byte always 0. Are these SHORT values instead of bytes?
    // 2nd byte:
    // 18   MZ
    // 66   PF
    
    
    ubyte unknown_button_data_806_screen_behavior[4]<bgcolor=cRed>;    
    // known (dec) values:
    // 0
    // 1
    // 2
    // 06 = screen doesn't scroll to show all profiles, only the ones that are in the profile selection list.
    // 250 (FA) 
    // FF = no screen visible
    // FE = no screen visible
    // F0 = no screen visible
    // 0A = no screen visible
    //      0: "Not set"
    //      1: "Title: <brand> drive profile with DCC"
    //      2: "Title: <brand> drive profile"
    //      3: "Profiles are no longer matching, and a different animation" - Never seen in factory datasets.
    //      4: "No HMI screen, only FPA icon"                               - Never seen in factory datasets.
    //      5: "Nothing on HMI screen, FPA only visible on virtual cockpit" - Never seen in factory datasets.
    //      6: "Title = profile name. Screen only shows the profiles that are in the list",
    //      7: "No HMI screen, only FPA icon"                               - Never seen in factory datasets.
    //      250: "Unknown"
    
    
    
    ubyte unknown_button_data_80A[4]<bgcolor=cDkRed>;
    // 1st byte always 0
    // known (dec) values:
    // 2nd byte:
    // 0
    // 3
    // 11
    //
    // 3rd byte:
    // 1
    // 5
    // 6
    // 12
    //
    // 4th byte:
    // 1
    // 2
    // 3
    // 9
    
    
    ubyte unknown_button_data_80E[4]<bgcolor=cRed>;
    // 1st byte:
    // 0
    // 1
    //
    // 2nd byte:
    // 0
    // 1 (only 1 if 1st byte = 0)
    //
    // 3rd byte:
    // 2
    // 241
    //
    // 4th byte:
    // 2
    // 241
    
    
    ubyte unknown_button_data_812[4]<bgcolor=cLtRed>;
    // 0
    // 1
    // 2
    // 10
    
    
    ubyte unknown_button_data_816[4]<bgcolor=cRed >;
    // 0
    // 1
    // 2
    // 33
    // 112
    // 113
    // 255
    
} unknown_button_data;

ubyte unknown_button_data_81A[3]<bgcolor=cDkRed >;
// 0 0 0 on most datasets
// 1 0 0 on N1 and N8

ubyte unknown_button_data_81D[10]<bgcolor=cRed >;
// 0 0 0 0 0 0 0 0 0 0 on most datasets
// 0 0 0 0 0 0 0 0 0 1 on MZ

ubyte unknown_button_data_827[18]<bgcolor=cLtRed >; 
// this needs more research.
// 00 02 00 02 00 12 00 00 00 00 00 00 00 00 00 00 00 00 on J4 
// 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 on all other datasets

ubyte unknown_839[2]<bgcolor=cDkRed >;
// Known dec values:
// 0 0   almost all datasets
// 8 0   MZ

ubyte unknown_83B[10]<bgcolor=cRed >;
// known values:
// all datasets: FF FF FF FF FF FF FF FF FF FF (reserved for future use?)
// J4 has:       05 05 04 FF FF FF FF FF FF FF
// MZ has:       FF FF FF FF FF FF FF FF FF F1


struct {
        ubyte unknown_845_data[15];
        } unknown_845_table[8]<bgcolor=cDkRed >;
// some kind of table, 8 by 15. Only J4 and MZ seem to have it. Some old gateway leftover?

ubyte unknown_88D[3] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0x00;

byte unknown_8C0[2]<bgcolor=cDkRed >;
// Known values:
// 00
// 2E (0010 1110) on all datasets with FPA
// 26 (0010 0110) on KV00
// could be some kind of feature flag, where bits set various features?
// todo: test with this, there might be something cool inside like test mode that enables all profiles ;-)


byte AID_profile_banner[12]<bgcolor=cGreen, comment=getAIDBanner>; //Determines what banner is shown on the AID when selecting the profile
// todo: test the following decimal values:
// 32

byte unknown_setting_8CE[12]<bgcolor=cLtRed>;
// Only J4 has data here:
// 00 00 17 00 00 16 00 00 00 00 00 00


byte unknown_setting_8DA[9]<bgcolor=cRed>;
// after setting to 123456789, the default settings on individual profile were reset.
// Of this list of 9 bytes, only the 2nd and 3rd byte have data
// is filled with  0, 1, 2, 5 or 6.
// Possibly some kind of long press default value?
// todo: test changing the values:
// 0
// 1
// 2
// 5
// 6

short mode_light_on[12]<bgcolor=cGreen, name=getModeButtonLightState>; 
// 00 = off
// 01 = on
// 02 = blink 
// 03 = ?
// 05 = ?
// 06 = Tiguan knob lit.

// the following 8 groups of data map perfectly to the controls.
// it is the value range that is used when communicating to the control module.
// These bytes actually control what is happening when a certain mode is chosen
// You can diplay these as a matrix
BitfieldRightToLeft();

struct{
    struct{
        int request_value_A     :4;
        int request_value_B     :4;
    }request_value[30]<optimize=true>;
} request_values[8]<bgcolor=cGreen,optimize=true>;

// This is a matrix of 8 bytes x 30 controls.
// Each byte holds 2 profiles (4 bit per profile)
// The value is sent to the control module, which changes it's behavior to a given mode when it's supported.
// The values correspond with the request value that can be found in
// measurements values, driving profile selection, requested value.
// If a Requested Value leads to a change in Actual Value, it means the module accepts this value.

byte list_of_controls[30]<bgcolor=cGreen, comment=getControlName >;
// This determines what FPA-control is controled by the bytes at "settings_shown_in_HMI"
// usage: set each byte to whatever FPA-control you would like to be handles by the "settings_shown_in_HMI". This should be in line with FPA_controls
// NEVER PUT FF HERE

byte grouped_controls[30] <bgcolor=cDkGreen>;
// this byte range determines to which group a control belongs.

long grouped_controls_controlbyte <bgcolor=cDkGreen, fgcolor=cLtGreen,format=binary>;
// works as follows:
// 1 grouped setting:  01 (Bit 0 set)
// 2 grouped settings: 03 (Bit 0-1 set)
// 3 grouped settings: 07 (Bit 0-2 set)
// 4 grouped settings: 0F (Bit 0-3 set)
// 5 grouped settings: 1F (Bit 0-4 set)
// 6 grouped settings: 3F (Bit 0-5 set)
// 7 grouped settings: 7F (Bit 0-6 set)

byte gw_longcoding_controls_with_links[30]<bgcolor=cGreen, name=getLongCodingByteName>;
// Byte 9, Bit 0 = 0x19 = EDS and so forth
// Byte 9, Bit 1 = 0x1A = HHC
// see getLongCodingByteName

byte gw_longcoding_controls_without_links[30]<bgcolor=cDkGreen, name=getLongCodingByteName>;
// Same list as previous one, but can be used to link one control to another.  Is used with Sailing and 4x4 features.

byte SettingBytes_again[30] <bgcolor=cRed>; // rhymes with earlier setting bytes?
// known values: 2 and 3. Changes didn't seem to touch the 0x38 table logic
byte SettingBytes_more[30] <bgcolor=cDkRed>; // rhymes with earlier setting bytes?
// known values: 0 and 8. Changes didn't seem to touch the 0x38 table logic

// the following data all seems to be related to PHEV.
struct{
    // the following data appears to be related to Hybrid only, as it's almost completely empty on non-hybrid/PHEV datasets.
    ubyte PHEV_unknown_AA3[8] <bgcolor=cLtRed>;
    // KV, N1, N8:      00 01 02 03 04 00 00 01
    // others:          00 32 33 34 00 00 00 01
    
    ubyte PHEV_unknown_AA9[4] <bgcolor=cRed>;
    // known decimal values:
    // 255, 255, 255, 255 on most datasets
    // 255, 6    255, 255 on PD, PF, PH and PO 
    // 255, 8    241, 241 on O2, O3, O4, O5, ON, OO, OV, P2, P3, P4, PG, PJ, PK, PL, TE
    
    ubyte PHEV_unknown_AAF[4] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0xFF
    
    ubyte PHEV_unknown_AB3[4] <bgcolor=cDkRed>;
    // known decimal values:
    // 5	241	1	255
    // 5	241	241	255
    // 255	255	4	241
    // 255	255	255	255
    
    ubyte PHEV_unknown_AB7[5] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0xFF
    ubyte PHEV_unknown_ABC <bgcolor=cDkRed>; // always 0xFF, except on MZ: 5
    ubyte PHEV_unknown_ABD[9] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0xFF
    ubyte PHEV_unknown_AC6[26] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0x00
    ubyte PHEV_unknown_AE0[14] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0xFF
    ubyte PHEV_unknown_AEE[14] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always: 00 FF 00 00 FF FF FF FF FF FF FF 00 00 00
    
    // note: there are quite a few 14-sized shapes in this area...
    
    ushort PHEV_unknown_AFC <bgcolor=cDkRed>;   // always 0 0, except on MZ: 8 0
    ushort PHEV_unknown_AFE <bgcolor=cRed>;     // always 0 0, except on MZ: 8 0
    ushort PHEV_unknown_B00 <bgcolor=cDkRed>;   // always 0 0, except on MZ: 8 0
    ubyte PHEV_unknown_B02[5] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0
    ubyte PHEV_unknown_B08[4] <bgcolor=cDkRed>; // always 255 255, 255, 255, except on MZ: 255, 12, 12, 12
    ubyte PHEV_unknown_B0C[4] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0xFF
    ubyte PHEV_unknown_B0F[77] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // 77 bytes of FF's and 00's. What's the relevance? No idea!
    
    ushort PHEV_unknown_B5C[20] <bgcolor=cDkRed>;    // see excelsheet
    ubyte PHEV_unknown_B83[44] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0x00
    ubyte PHEV_unknown_BB0[10] <bgcolor=cDkRed>;     // see excelsheet
    ushort PHEV_unknown_BBA[10] <bgcolor=cLtRed>;    // see excelsheet
    ubyte PHEV_unknown_BCE[10] <bgcolor=cDkRed>;     // see excelsheet

    struct {
        ubyte PHEV_unknown_BD8_table_1[32] <bgcolor=cRed>;     // see excelsheet, could be like a controls list?
        ubyte PHEV_unknown_BD8_table_2[32] <bgcolor=cDkRed>;   // see excelsheet, could be hybrid mode 1?
        ubyte PHEV_unknown_BD8_table_3[32] <bgcolor=cRed>;     // see excelsheet, could be hybrid mode 2?
        ubyte PHEV_unknown_BD8_table_4[32] <bgcolor=cDkRed>;   // see excelsheet, could be hybrid mode 3?
    } PHEV_unknown_BD8_table;
    
    ubyte PHEV_unknown_C58[22] <bgcolor=cLtRed>;     // see excelsheet
    
    
    ubyte PHEV_unknown_C6E[107] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>;     // see excelsheet
    ubyte PHEV_unknown_CD9[1] <bgcolor=cRed>;
    // known decimal values:
    // 0 : almost always
    // 80: N1, N8, KV (Audi datasets)
    // 42: O2, O3, O4, O5, ON, OO, OV, P2, P3, P4, PG, PJ, PK, PL, TE
    ubyte PHEV_unknown_CDA[3] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0
    ubyte PHEV_unknown_CDD[4] <bgcolor=cRed>;
    // known decimal values:
    // 0    0 0   0   : almost always
    // 134  0 12  0   : KV, N1, N8 (Audi datasets)
    // 34   0 28  0   : MZ
    // 34   0 28  27  : O2, O3, O4, O5, ON, OO, OV, P2, P3, P4, PG, PJ, PK, PL, TE   

    ubyte PHEV_unknown_CE1[11] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0
    ubyte PHEV_unknown_CEC[1] <bgcolor=cRed>;
    // known decimal values:
    // 0    
    // 1:   O4, O5, P2
    // 5:   O2, O3, ON, OO, OV, P3, P4, PG, PJ, PK, PL, TE

    ubyte PHEV_unknown_CED[9] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0
    ubyte PHEV_unknown_CF6[1] <bgcolor=cRed>;
    // known decimal values:
    // 0    
    // 1: O2, O3, O4, O5, ON, OO, P2, P3, P4, PG, PJ, PK, PL, TE

    ubyte PHEV_unknown_CF7[11] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0
    ubyte PHEV_unknown_D02[10] <bgcolor=cRed>;
    // known decimal values:
    // 15	0	0	0	30	0	0	1	0	0   KV, N1, N8 (Audi datasets)
    // 31	0	0	0	62	0	0	1	0	0   MZ, O2, O3, O4, O5, ON, OO, OV, P2, P3, P4, PG, PJ, PK, PL, TE

    ubyte hybrid_modes[12]<format=decimal,bgcolor=cYellow>; //not sure, needs testing
    ubyte hybrid_modes_active[12]<bgcolor=cRed >; //not sure, needs testing
    
    ubyte PHEV_unknown_D24[192] <bgcolor=cDkRed >;

    ubyte PHEV_unknown_DE4[12] <bgcolor=cLtRed>;
    // on cars with a hybrid profile, this is always:
    // 6 5 1 4 1 3 2 1 1 14 13 1
    // otherwise it's zeroes.   

    ubyte PHEV_unknown_DF0[6] <bgcolor=cRed>;
    // zeroes, but on MZ it's 0 0 3 0 0 0 

    ubyte PHEV_unknown_DF6[28] <bgcolor=cDkRed>;

    ubyte PHEV_unknown_E12[4] <bgcolor=cRed>;
    // zeroes, but on MZ it's 3 0 0 0 

    ubyte PHEV_unknown_E16[14] <bgcolor=cLtRed>;

    ubyte PHEV_unknown_E24[8] <bgcolor=cRed>;

    struct{
        ubyte PHEV_unknown_E2C_data[6];
    }   PHEV_unknown_E2C[5] <bgcolor=cDkRed>;


    ubyte PHEV_unknown_E4A[4] <bgcolor=cRed>;
    ubyte PHEV_unknown_E4F[8] <bgcolor=cLtRed>; // 2 0 0 0 0 0 0 0  on MZ, 0 on all others
    ubyte PHEV_unknown_E56[64] <bgcolor=cRed>; // looks to be 8x8 bytes or so
    ubyte PHEV_unknown_E96[7] <bgcolor=cDkRed>; // on Hybrid cars: 138 37 1 34 0 174 0 
    ubyte AID_mode_banner[12]<bgcolor=cGreen, comment=getAIDBanner>;
    ubyte PHEV_unknown_EA9[20] <bgcolor=cDkRed>; // on Hybrid cars: 138 37 1 34 0 174 0 
    ubyte PHEV_unknown_E4D[4] <bgcolor=cRed>;
    ubyte PHEV_unknown_EC1[10] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0
    ushort PHEV_unknown_ECB[4] <bgcolor=cRed>;
    ubyte PHEV_unknown_ED3[4] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0
    ubyte PHEV_unknown_ED7[4] <bgcolor=cDkRed>;
    // especially the 4th byte has a lot of variation and is set on most datasets
    // very interesting what this could be!
    ubyte PHEV_unknown_EDB[24] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0
    ubyte PHEV_unknown_EF3[1] <bgcolor=cRed>;
    // always 0, except on O2, O3, O4, O5, ON, OO, OV, P2, P3, P4, PG, PJ, PK, PL, PM, TE. There it's 21
    ubyte PHEV_unknown_EF4[4] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0
    ubyte PHEV_unknown_EF8[1] <bgcolor=cRed>; // 1 on KV, otherwise 0
    ubyte PHEV_unknown_EF9[7] <bgcolor=cDkGray, fgcolor=cGray, hidden=true>; // always 0
    ubyte PHEV_unknown_F00[1] <bgcolor=cRed >;
    // 0 : almost always
    // KV: 8
    
    ubyte PHEV_unknown_F01[24] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0
    ubyte PHEV_unknown_F19[2] <bgcolor=cRed >;
    // 0 0: almost always
    // KV: 127 255
    
    FSeek(3867);
    ubyte PHEV_unknown_F1B[15] <bgcolor=cDkGray, fgcolor=cGray , hidden=true>; // always 0
    ubyte PHEV_unknown_F1D[2] <bgcolor=cRed >;
    // 0 0: almost always
    // 6 0: on PD, PH, PO
    // 0 6: on PF
} PHEV_unknown_data <fgcolor=cLtBlue>;


if (mk7) {
    FSeek(0xf2c);
    ubyte PHEV_zeroes[464]<bgcolor=cDkGray, fgcolor=cGray , hidden=true>;   // all zeroes on all datasets I've seen
}       
    FSeek(FileSize()-4);
    LittleEndian(); // go to littleendian mode because of checksum format
    
    local int calculated_checksum;
    calculated_checksum = Checksum(CHECKSUM_CRC32, 0,FileSize()-4);
    ulong dataset_checksum       <format=hex,bgcolor=cGreen,comment="CRC32">;


FSeek(2006);
ubyte button_for_test[32];





// Don't mess with anything below here, unless you know what you're doing.

printTitle("Dataset specifics");

Printf(" Version: %s", dataset_version);
Printf(" \n"); 
 


local int i = 0;
local int j = 0;

local int profile_number = 0;
local int setting_number = 0;
local string settingText;

while( profile_number < 12 )

{
        if (FPA_profile[profile_number] != 00) {
        Printf (" Profile position %i: %s(%x) \n", profile_number, getFPAName(FPA_profile[profile_number]),FPA_profile[profile_number] );
        Printf ("  Returns to %s after restart\n", getFPAName(profile_returns_after_restart[profile_number]) );
        Printf ("  Banner on AID: %s \n", getAIDBanner(AID_profile_banner[profile_number]) );
        Printf ("  Mode button LED: %s \n", getModeButtonLightState(mode_light_on[profile_number]));
        Printf ("  Settings: \n");

          for( setting_number = 0; setting_number < 30; setting_number++)
        {
            settingText = getSettingName(profile[profile_number].setting_byte[setting_number]);
            if (settingText!="not set"){
                Printf ("\t%i\t%-30s: %s (%x) \n", setting_number, getControlName(list_of_grouped_controls[setting_number]),getSettingName(profile[profile_number].setting_byte[setting_number]),profile[profile_number].setting_byte[setting_number]);
            }
        }
 }
    profile_number += 1;
    Printf("\n");
}

local int indiv_profile_number = 0;
local int indiv_setting_number = 0;

printTitle("HMI");
Printf(" The following settings are shown in the HMI.\n Items that have no settings are hidden.\n\n");
while( indiv_profile_number < 12 )
    {
        {
             Printf (" %s HMI shows the following settings: \n", getSettingName(indiv_profile_number+1) );
             Printf (" Position  Control                         setting: \n");

              for( indiv_setting_number = 0; indiv_setting_number < 30; indiv_setting_number++)
            {
                if (list_of_grouped_controls[indiv_setting_number] > 0){
                    Printf ("  %i \t %-30s: %s(%04x) \n", indiv_setting_number, getControlName( list_of_grouped_controls[indiv_setting_number]),getIndividualSettingName(settings_shown_in_HMI[indiv_profile_number].individual_setting_byte[indiv_setting_number]),(settings_shown_in_HMI[indiv_profile_number].individual_setting_byte[indiv_setting_number]));
               }
            }
    }
    indiv_profile_number += 1;
    Printf("\n");
}


local int indivgroup_setting_number = 0;
local int group_number = 0;


printTitle("Controls");
Printf(" Pos \tDisplayed Name                  \tControl \t Gateway Long Coding Byte \n");

local int ctrlPosition = 0;

for( ctrlPosition = 0; ctrlPosition < 30; ctrlPosition++)
{

    if (list_of_controls[ctrlPosition] > 0){
        if (gw_longcoding_controls_without_links[ctrlPosition] == gw_longcoding_controls_with_links[ctrlPosition]){
            Printf ("  %i \t%-30s\t%02x \t %s (%02x)\n", ctrlPosition, getControlName(list_of_controls[ctrlPosition]), list_of_controls[ctrlPosition], getLongCodingByteName(gw_longcoding_controls_with_links[ctrlPosition]),gw_longcoding_controls_with_links[ctrlPosition]);
        } else { 
            Printf ("  %i \t%-30s\t%02x \t %s (%02x) linked to %s (%02x)\n", ctrlPosition, getControlName(list_of_controls[ctrlPosition]), list_of_controls[ctrlPosition], getLongCodingByteName(gw_longcoding_controls_with_links[ctrlPosition]),gw_longcoding_controls_with_links[ctrlPosition],getLongCodingByteName(gw_longcoding_controls_without_links[ctrlPosition]),gw_longcoding_controls_without_links[ctrlPosition]);
        }
 }
}

printTitle("Setting Groups");
local int num_of_groups = 0;
while (indivgroup_setting_number < 30) {
    group_number = 1;

    while (group_number < 30) {
        if (grouped_controls[indivgroup_setting_number] == group_number) {
            //The following statement is to fix a bug where the name of the group 4 needs the control that's in position 3.
            if (group_number == 4){ 
            Printf("    Group %i (%s): %s (%02x) - 0x38 Matrix line: %i\n", group_number, getControlName(list_of_grouped_controls[group_number-2]), getControlName(list_of_controls[indivgroup_setting_number]),list_of_controls[indivgroup_setting_number], groupMemberMatrixPosition(indivgroup_setting_number,group_number));
            }else{            
            Printf("    Group %i (%s): %s (%02x) - 0x38 Matrix line: %i\n", group_number, getControlName(list_of_grouped_controls[group_number-1]), getControlName(list_of_controls[indivgroup_setting_number]),list_of_controls[indivgroup_setting_number], groupMemberMatrixPosition(indivgroup_setting_number,group_number));
            }
            num_of_groups++;
                  }
        group_number++;
    }
    indivgroup_setting_number++;
}
if (num_of_groups == 0) {
Printf(" No groups configured at 0xA09 range.\n");
}


//----
printTitle("Allowed to make changes to a specific mode for a specific setting (0x296)");
Printf("                                            \tComfort────────────────────┐\n") ;
Printf("                                            \tNormal────────────────────┐│\n") ;
Printf("                                            \tSport────────────────────┐││\n") ;
Printf("                                            \tOffroad─────────────────┐│││\n") ;
Printf("                                            \tRace───────────────────┐││││\n") ;
Printf("                                            \tEco───────────────────┐│││││\n") ;
Printf("                                            \tIndividual───────────┐││││││\n") ;
Printf("                                            \tRange───────────────┐│││││││\n") ;
Printf("                                            \tLift──────────────┐ ││││││││\n") ;
Printf("                                            \tOffroad Snow─────┐│ ││││││││\n") ;
Printf("                                            \tOffroad Indiv.──┐││ ││││││││\n") ;
Printf("                                            \tOffrd/HHold────┐│││ ││││││││\n") ;
Printf("                                            \tOffrd/HCharge─┐││││ ││││││││\n") ;
Printf("                                            \tOffrd/HArea──┐│││││ ││││││││\n") ;
Printf("                                            \tEV OFF──────┐││││││ ││││││││\n") ;
Printf("                                            \t?????──────┐│││││││ ││││││││\n") ;

for( i = 0; i < 30; i++)
{

    if (list_of_controls[i] > 0){
        Printf ("  %i: \t%-30s \t %02x \t %s \t %02x\n", i, getControlName(list_of_controls[i]), list_of_controls[i], IntToBinaryStr(function_bytes_settings_shifted_by_1_bit[i],2,true),function_bytes_settings_shifted_by_1_bit[i]);
   }
}

printTitle("Remember setting in specific mode after restart of the car: (0x2D2) ");
Printf("\t\t\t\t\t?????──────────────────────┐\n") ;
Printf("\t\t\t\t\tComfort───────────────────┐│\n") ;
Printf("\t\t\t\t\tNormal───────────────────┐││\n") ;
Printf("\t\t\t\t\tSport───────────────────┐│││\n") ;
Printf("\t\t\t\t\tOffroad────────────────┐││││\n") ;
Printf("\t\t\t\t\tRace──────────────────┐│││││\n") ;
Printf("\t\t\t\t\tEco──────────────────┐││││││\n") ;
Printf("\t\t\t\t\tIndividual──────────┐│││││││\n") ;
Printf("\t\t\t\t\tRange─────────────┐ ││││││││\n") ;
Printf("\t\t\t\t\tLift─────────────┐│ ││││││││\n") ;
Printf("\t\t\t\t\tOffroad Snow────┐││ ││││││││\n") ;
Printf("\t\t\t\t\tOffroad Indiv.─┐│││ ││││││││\n") ;
Printf("\t\t\t\t\tOffrd/HHold───┐││││ ││││││││\n") ;
Printf("\t\t\t\t\tOffrd/HCharge┐│││││ ││││││││\n") ;
Printf("\t\t\t\t\tOffrd/HArea─┐││││││ ││││││││\n") ;
Printf("\t\t\t\t\tEV OFF─────┐│││││││ ││││││││\n") ;
for( i = 0; i < 30; i++)
{

    if (list_of_controls[i] > 0){
        Printf ("  %i: \t%-30s \t %02x \t %s \t %02x\n", i, getControlName(list_of_controls[i]), list_of_controls[i], IntToBinaryStr(function_bytes_settings[i],2,true), function_bytes_settings[i]);
   }
}

printTitle("Request values (0x8FB)");

// Prints a table of all requests values that are sent to control modules.
Printf(" \n");
Printf(" Control-module request values (8FB range)\n");
Printf ("\t\t\t\t\trequest_values_0\t|request_values_1\t|request_values_2\t|request_values_3\t|request_values_4\t|request_values_5\t|request_values_6\t|request_values_7\n");
Printf(" Position\tControl\t\t\t\t00\tcmft(1)\tnrml(2)\tsprt(3)\tofrd(4)\teco(5)\trace(6)\teco+(7)\ton(8)\toff(9)\tsnow(10)\tpure(11)\t12\tsand(13)\t14\t15\n");
for( i = 0; i < 30; i++)
{
    if (list_of_grouped_controls[i] > 0){
        Printf ("  %i:\t %-30s(%02x)", i, getControlName(list_of_grouped_controls[i]),list_of_grouped_controls[i]);
        j = 0;
        while (j < 8){ 
        Printf ("\t%02i\t%02i", request_values[j].request_value[i].request_value_A, request_values[j].request_value[i].request_value_B) ;
        j++;
        }
        Printf("\n");
   }
}
printTitle("Research stuff");

/*
//--- research stuff, what looks like a table from position 38:
Printf("\n Unknown 38x research\n");
i = 0;
j = 0;
local int amount_of_unknown38_rows_with_value = 0;
local int amount_of_unknown38_values = 0;
local int amount_of_unknown38_values_A = 0;
local int amount_of_unknown38_values_B = 0;


local string even_lines;
local string uneven_lines;
local int line_number =0;

        Printf("\n");

Printf(" Position\tControl\t\t\t\t1\t2\t3\t4\t5\t6\t7\t8\t9\t10\t11\t12\t13\t14\t15\n");
i = 0;
j = 0;
local int k = 0;
line_number =0;
local string filled_lines = "";
local string used_controls = "";
for( i = 0; i < 32; i++)
{
        amount_of_unknown38_values_A=0;
        amount_of_unknown38_values_B=0;

        for( j = 0; j < 15; j++){
        if (group_children_request_values[i].group_children_request_values_x[j].value_A!=0){
            amount_of_unknown38_values_A++;
        }
        if (group_children_request_values[i].group_children_request_values_x[j].value_B!=0){
            amount_of_unknown38_values_B++;
            }
        }

        if (amount_of_unknown38_values_A > 0){
                amount_of_unknown38_rows_with_value++;
                Printf("  %i:\t %-30s (%02x)\t", line_number, getControlName(list_of_controls[groupsMatrixControlsArray[line_number]]),list_of_controls[groupsMatrixControlsArray[line_number]]);
                filled_lines = filled_lines + Str("%i,",line_number);
                for( j = 0; j < 15; j++)
                {
                    Printf("%01x\t", group_children_request_values[i].group_children_request_values_x[j].value_A);
                }

                Printf("\n");
                used_controls = used_controls + (getControlName(list_of_controls[amount_of_unknown38_rows_with_value-1])) + Str("(%i), ", list_of_controls[amount_of_unknown38_rows_with_value-1]);
           }
        line_number++;
        if (amount_of_unknown38_values_B > 0){
                amount_of_unknown38_rows_with_value++;
                Printf("  %i:\t %-30s (%02x)\t", line_number, getControlName(list_of_controls[groupsMatrixControlsArray[line_number]]),list_of_controls[groupsMatrixControlsArray[line_number]]);
                filled_lines = filled_lines + Str("%i,",line_number);
                for( j = 0; j < 15; j++)
                {
                    Printf("%01x\t", group_children_request_values[i].group_children_request_values_x[j].value_B);
                }

                Printf("\n");
                used_controls = used_controls + (getControlName(list_of_controls[amount_of_unknown38_rows_with_value-1])) + Str("(%i), ", list_of_controls[amount_of_unknown38_rows_with_value-1]);

           }
            line_number++;
}
*/

Printf("\n unknown_setting_8DA:\t");
for (i=0;i<9;i++){
        Printf("%i \t", unknown_setting_8DA[i] );
        }




// Showing how the byte_active bytes are set for each control. Currently, the meaning of these values is unknown.
Printf("\n\n Position Control                        \t 0xA67 \t 0xA85 \t Meaning\n");
for( i = 0; i < 30; i++)
{
    if (list_of_controls[i] > 0){
        Printf ("  %i:\t %-30s \t %i \t %i \n", i, getControlName(list_of_controls[i]), SettingBytes_again[i],SettingBytes_more[i]);
   }
}


printTitle("Checksum");
Printf(" Checksum in file    : %06lx \n", ((unsigned long)dataset_checksum & 0xFFFFFFFFUL));
Printf(" Calculated checksum : %06lx \n\n",((unsigned long)calculated_checksum & 0xFFFFFFFFUL));
if (dataset_checksum != calculated_checksum){
    Printf(" ! Checksums are not identical \n    ! Copy calculated value into checksum at Variables screen \n");
} else {
    Printf(" Checksums are identical, no updates needed\n");
  };
Printf(" #################################################\n");


// Lookup functions start here.
// Messing with these will mess up the display in the variables section and in the output console.

// helper function to get the setting name.
string getSettingName(int settingNumber) {
    switch (settingNumber) {
        case 0x0: return "not set";
        case 0x1: return "Comfort";
        case 0x2: return "Normal";
        case 0x3: return "Sport";
        case 0x4: return "Offroad";
        case 0x5: return "Eco";
        case 0x6: return "Race";
        case 0x7: return "Individual/Eco+";
        case 0x8: return "On";
        case 0x9: return "Off";
        case 0xA: return "Snow";
        case 0xB: return "Config 11";
        case 0xC: return "Config 12";
        case 0xD: return "Sand";
        case 0xE: return "Config 14";
        case 0xF: return "Config 15";

        default:  return "Unknown";
    }
}

// helper function to get light mode name
string getModeButtonLightState(int lightMode) {
    switch (lightMode) {
        case 0x0: return "Off";
        case 0x1: return "On";
        case 0x2: return "Blinking";
        case 0x5: return "Unknown Skoda value";
        case 0x6: return "Blinking";
        default:  return "Unknown";
    }
}

// helper function to get the control name.
string getControlName(int controlNumber) {
    switch (controlNumber) {
        case 0x00: return "not set";
        case 0x01: return "Engine";
        case 0x02: return "Start/Stop System";
        case 0x03: return "Gearbox";
        case 0x04: return "Rear Differential Lock";
        case 0x05: return "Steering";
        case 0x06: return "Progressive Steering";
        case 0x07: return "DCC";
        case 0x08: return "HVAC (Air Conditioning)";
        case 0x0A: return "Interior Engine Sound";
        case 0x09: return "ACC";
        case 0x0B: return "Motorway Light";
        case 0x0C: return "Background Lighting";
        case 0x0D: return "Air Suspension";
        case 0x0E: return "Automatic Belt Pre-Tensioning";
        case 0x0F: return "Seat Bolster Setting";
        case 0x10: return "Route Option";
        case 0x11: return "Navigation";
        case 0x12: return "DSG Coasting";
        case 0x13: return "Eco Tips";
        case 0x14: return "Exterior Engine Sound";
        case 0x15: return "Front Differential Lock";
        case 0x16: return "Center Differential Lock";
        case 0x17: return "Four-Wheel Drive (AWD)";
        case 0x18: return "Electronic Torque Vectoring (Audi-Text)";
        case 0x19: return "Anti-Slip regulation";
        case 0x1A: return "Headlight Control";
        case 0x1B: return "Rear spoiler";
        case 0x1C: return "ESC System"; //this one has the ability to change the start/stop behavior.
        case 0x1D: return "Rear Axle Steering";
        case 0x1E: return "Adaptive Body Roll Compensation";
        case 0x1F: return "Road Recognitiion";
        case 0x20: return "Hybrid Drive";
        case 0x21: return "Drive";
        case 0x22: return "Chassis";
        case 0x23: return "Exhaust Valves";
        case 0x24: return "Engine Sound";
        case 0x25: return "Passenger Compartment";
        case 0x26: return "Driver's Seat";
        case 0x27: return "Tyre Pressure Monitoring System (TPMS)";
        case 0x28: return "Lane Assist";
        case 0x29: return "Aggregatelagerung (Audi-Text)";
        case 0x2A: return "Magnetic Ride (Audi-Text)";
        case 0x2B: return "Sport Select Chassis";
        case 0x2C: return "Hill Descent Assist";
        case 0x2D: return "Hill Hold Assist";
        case 0x2E: return "Parking Assist";
        case 0x2F: return "Instrument Cluster";
        case 0x30: return "Infotainment System";
        case 0x31: return "Eco Driving Tips";
        case 0x32: return "Speed Adjustment";
        case 0x33: return "Electronic Engine Sound";
        case 0x34: return "Nothing displays, just Engine";
        case 0x35: return "Nothing displays, just Engine";
        case 0x36: return "ESC System";
        case 0x37: return "Nothing displays";
        case 0x3A: return "Unknown";
        case 0x41: return "Engine";
        case 0x46: return "Range calculation";  //doesn't seem to display on screen
        case 0x48: return "Unknown";
        case 0x49: return "Hill Hold Assist";   //seen in L900
        case 0x4A: return "Unknown";
        case 0x4B: return "Engine";             //seen on TCR
        case 0x4C: return "Freilauf_DefaultON";
        case 0x4D: return "mFDR/freewheeling?";
        case 0x4E: return "Electric Brake Power Amplifier?";      
        case 0x50: return "All wheel drive?";
        case 0x51: return "Range calulation?";

        case 0xFF: return "-";
        default:   return "Unknown";
    }
}

// helper function to get the control name.
string getLongCodingByteName(int controlNumber) {
    switch (controlNumber) {
        case 0x00: return "not set";
        case 0x01: return "Byte 12, bit 0 - AGA (External Exhaust sound)";
        case 0x02: return "Byte 12, bit 1 - ESP (Stability Program)";
        case 0x03: return "Byte 12, bit 2 - Freilauf (Sailing/Freerunning)";
        case 0x04: return "Byte 12, bit 3 - MO (Engine Management)";
        case 0x05: return "Byte 12, bit 4 - GE (Transmission Management)";
        case 0x06: return "Byte 12, bit 5 - ALR (All Wheel Drive)";
        case 0x07: return "Byte 12, bit 6 - MO_BZS(Engine.......)";
        case 0x08: return "Byte 12, bit 7 - DR (Damper Control / DCC)";
        case 0x09: return "Byte 11, bit 0 - VAQ (Front differential lock)";
        case 0x0A: return "Byte 11, bit 1 - AFS (Advanced Front Lighting)";
        case 0x0B: return "Byte 11, bit 2 - RGS (Seatbelt Tensioner)";
        case 0x0C: return "Byte 11, bit 3 - EPS (Electrical Power Steering)";
        case 0x0D: return "Byte 11, bit 4 - ACC (Adaptive Cruise Control)";
        case 0x0E: return "Byte 11, bit 5 - SAK (Interior Sound Control)";
        case 0x0F: return "Byte 11, bit 6 - MO_StSt (Start/Stop System)";
        case 0x10: return "Byte 11, bit 7 - AMB (Ambient Lights)";
        case 0x11: return "Byte 10, bit 0 - IVB (??)";
        case 0x12: return "Byte 10, bit 1 - KL (Climate control)";
        case 0x13: return "Byte 10, bit 2 - HSP (Rear Spoiler)";
        case 0x14: return "Byte 10, bit 3 - AV (Area View??)";
        case 0x15: return "Byte 10, bit 4 - RWB (Range calculation)";
        case 0x16: return "Byte 10, bit 5 - HDC (Downhill Assistant)";
        case 0x17: return "Byte 10, bit 6 - eBKV (Electric Brake Power Amplifier)";
        case 0x18: return "Byte 10, bit 7 - AGK (Exhaust valves)";
        case 0x19: return "Byte 09, bit 0 - EDS (Rear differential lock)";
        case 0x1A: return "Byte 09, bit 1 - HHC (Hill Hold Control)";
        case 0x1B: return "Byte 09, bit 2 - PDC (Park Distance Control)";
        case 0x1C: return "Byte 09, bit 3 - FMA (Freewheeling, engine off)";
        case 0x1D: return "Byte 09, bit 4 - Freewheeling, Default ON";
        case 0x1E: return "Byte 09, bit 5 - mFDR (??)";
        case 0x1F: return "Byte 09, bit 6 - SchaltDR (Operating Mode Selection?)";
        case 0x20: return "Byte 09, bit 7 - Stages DCC (??)";
        default:   return "Unknown";
    }
}


string getGroupMemberLongCodingByteName(int value) {
    if (value == 0) {
        return "not set ";
    }

    local string controlName = "";
    if (value & (1 << 0))  { controlName += "AGA (External Exhaust sound), ";}
    if (value & (1 << 1))  { controlName += "ESP (Stability Program), ";}
    if (value & (1 << 2))  { controlName += "Freilauf (Sailing/Freerunning), ";}
    if (value & (1 << 3))  { controlName += "MO (Engine Management), ";}
    if (value & (1 << 4))  { controlName += "GE (Transmission Management), ";}
    if (value & (1 << 5))  { controlName += "ALR (All Wheel Drive), ";}
    if (value & (1 << 6))  { controlName += "MO_BZS(Engine.......), ";}
    if (value & (1 << 7))  { controlName += "DR (Damper Control / DCC), ";}
    if (value & (1 << 8))  { controlName += "VAQ (Front differential lock), ";}
    if (value & (1 << 9))  { controlName += "AFS (Advanced Front Lighting), ";}
    if (value & (1 << 10))  { controlName += "RGS (Seatbelt Tensioner), ";}
    if (value & (1 << 11))  { controlName += "EPS (Electrical Power Steering), ";}
    if (value & (1 << 12))  { controlName += "ACC (Adaptive Cruise Control), ";}
    if (value & (1 << 13))  { controlName += "SAK (Interior Sound Control), ";}
    if (value & (1 << 14))  { controlName += "MO_StSt (Start/Stop System), ";}
    if (value & (1 << 15))  { controlName += "AMB (Ambient Lights), ";}
    if (value & (1 << 16))  { controlName += "IVB (??), ";}
    if (value & (1 << 17))  { controlName += "KL (Climate control), ";}
    if (value & (1 << 18))  { controlName += "HSP (Rear Spoiler), ";}
    if (value & (1 << 19))  { controlName += "AV (Area View??), ";}
    if (value & (1 << 20))  { controlName += "RWB (Range calculation), ";}
    if (value & (1 << 21))  { controlName += "HDC (Downhill Assistant), ";}
    if (value & (1 << 22))  { controlName += "eBKV (Electric Brake Power Amplifier), ";}
    if (value & (1 << 23))  { controlName += "AGK (Exhaust valves), ";}
    if (value & (1 << 24))  { controlName += "EDS (Rear differential lock), ";}
    if (value & (1 << 25))  { controlName += "HHC (Hill Hold Control), ";}
    if (value & (1 << 26))  { controlName += "PDC (Park Distance Control), ";}
    if (value & (1 << 27))  { controlName += "FMA (Freewheeling, engine off), ";}
    if (value & (1 << 28))  { controlName += "Freewheeling, Default ON, ";}
    if (value & (1 << 29))  { controlName += "mFDR (??), ";}
    if (value & (1 << 30))  { controlName += "SchaltDR (Operating Mode Selection?), ";}
    if (value & (1 << 31))  { controlName += "Stages DCC (??), ";}
    return controlName;
}

string getIndividualSettingName(int settingNumber) {
    if (settingNumber == 0) {
        return "not set ";
    }

    if (settingNumber == 65534) {
        return "Slider (on DCC) ";
    }

    local string settingName = "";
    if (settingNumber & (1 << 0))  { settingName += "Unknown 1 "; }
    if (settingNumber & (1 << 1))  { settingName += "Comfort "; }
    if (settingNumber & (1 << 2))  { settingName += "Normal "; }
    if (settingNumber & (1 << 3))  { settingName += "Sport "; }
    if (settingNumber & (1 << 4))  { settingName += "Offroad "; }
    if (settingNumber & (1 << 5))  { settingName += "Eco "; }
    if (settingNumber & (1 << 6))  { settingName += "Race "; }
    if (settingNumber & (1 << 7))  { settingName += "Eco+ "; }
    if (settingNumber & (1 << 8))  { settingName += "On "; }
    if (settingNumber & (1 << 9))  { settingName += "Off "; }
    if (settingNumber & (1 << 10)) { settingName += "Snow "; }
    if (settingNumber & (1 << 11)) { settingName += "Unknown 2"; }
    if (settingNumber & (1 << 12)) { settingName += "Unknown 3"; }
    if (settingNumber & (1 << 13)) { settingName += "Sand "; }
    if (settingNumber & (1 << 14)) { settingName += "Unknown 4 "; }
    if (settingNumber & (1 << 15)) { settingName += "Unknown 5 "; }

    return settingName;
}

string getFPAName(int settingNumber) {
    switch (settingNumber) {
        case 0x00: return "not set";
        case 0x01: return "Comfort";
        case 0x02: return "Auto/Normal";
        case 0x03: return "Dynamic/Sport";
        case 0x04: return "Offroad";
        case 0x05: return "Eco/Economy";
        case 0x06: return "Race";
        case 0x07: return "Individual";
        case 0x08: return "Range/PHEV 1/Clubsport/Snow";
        case 0x09: return "Lift/PHEV 2";
        case 0x0A: return "Snow";
        case 0x0B: return "Offroad Individual/PHEV 4/Hybrid Auto";
        case 0x0C: return "Offroad 4/Hybrid Hold";
        case 0x0D: return "Offroad 5/Hybrid Charge";
        case 0x0E: return "Offroad 6/Hybrid Area";
        case 0x0F: return "EV Off";
        case 0x10: return "Second Hold/Torque Vectoring";
        case 0x11: return "Racetrack/Hybrid Charge Off";
        case 0x12: return "Offroad Level 2/Adaptive";
        case 0x13: return "Offroad Level 3/Traction";
        case 0x14: return "Offroad Level 4";
        case 0x15: return "Hybrid Sport";
        case 0x16: return "Second Auto";
        case 0x17: return "Unknown Profile";
        case 0x28: return "GTE Off";
        case 0x29: return "GTE Off 2";
        case 0x2A: return "Unknown Profile 2";
        case 0xFF: return "none";
        default:   return "Unknown";
    }
}

string getAIDBanner(int settingNumber) {
    switch (settingNumber) {
        case 0x00: return "not set";
        case 0x01: return "Comfort";
        case 0x02: return "Normal";
        case 0x03: return "Sport";
        case 0x04: return "Offroad";
        case 0x05: return "Eco";
        case 0x06: return "Individual";
        case 0x07: return "Race";
        case 0x08: return "Eco";
        case 0x09: return "Eco: driving and performance restricted";
        case 0x0A: return "E-Mode";
        case 0x0B: return "Hybrid Auto";
        case 0x0C: return "Battery Hold";
        case 0x0D: return "Battery Charge";
        case 0x0E: return "E-Mode currently not available";
        case 0x0F: return "Eco+";
        case 0x10: return "Snow";
        case 0x11: return "Normal";
        case 0x12: return "Offroad individual, check individual settings";
        case 0x13: return "Auto";
        case 0x14: return "Driving Mode unable to switch";
        case 0x15: return "Hybrid Mode, unable to switch";
        case 0x16: return "Driving Mode Eco not available";
        case 0x17: return "Driving Mode Normal is not available";
        case 0x18: return "Mode Battery Hold not available";
        case 0x19: return "Driving Mode Normal is not available";
        case 0x1A: return "Mode Battery Charge not available";
        case 0x1B: return "GTE Off";
        case 0x1C: return "GTE Logo";
        case 0x20: return "?";
        default:   return "Unknown";
    }
}

string getSettingByteActive(int state) {
    switch (state) {
        case 0x0: return "Inactive";
        case 0x2: return "Active";
        case 0xB: return "Unknown (needs testing)";
        default:  return "Unknown";
    }
}

string getBoolean(int state) {
    switch (state) {
        case 0x0: return "Disabled";
        case 0x1: return "Enabled";
        default:  return "Unknown";
    }
}

string getYesNo(int value) {
    switch (value) {
    case 0x00: return "No";
    case 0x01: return "Yes";
    }
}

// helper function to print nice titles without needing to type them manually each time
void printTitle( string title )
    {
    Printf(" \n\n");
    Printf(" #################################################\n");
    Printf(" %s\n", title);
    Printf(" #################################################\n");
    }

int groupMemberMatrixPosition (int value, int group){
local int temp_order=0;
local int temp_group=0;
local int order = 0;
local int factor = 0;

   if (group == 4){ 
        group= 3;
    }

for(i = 0 ; i < 30 ; i ++){
	if (temp_group < grouped_controls[i]){
		temp_order = 0;
		temp_group = grouped_controls[i];
		} else {
		temp_order = temp_order+1;
		}
    if (i==value){
        order= temp_order;
    }
    }

    if( order < 2){
        factor = 0;
    }   else if (order < 4){
        factor = 1;
        order = order -2;
    }   else if (order < 6){
        factor = 2;
        order = order - 4;
    }   else if (order < 8){
        factor = 3;
        order = order -6;
    }
    order = (factor * 16) + order + (2*(group-1));
    groupsMatrixControlsArray[order] = value; 
    return order;       
}                               

local string filename = "";
filename = "c:\\temp\\" + dataset_version +  ".txt";
OutputPaneSave(filename);