-
Notifications
You must be signed in to change notification settings - Fork 61
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Software release, 07/09/2018: Manually assisted placement problem #58
Comments
do you have any idea what went wrong?
Not by these logs, but knowing how to get it misbehave allows me to reproduce the issue. And as always, once you can reliably reproduce it, it is usually easy to fix. I’ll investigate.
Best regards
Juha
From: petegit <notifications@github.com>
Sent: Sunday, September 16, 2018 8:01 PM
To: jkuusama/LitePlacer-DEV <LitePlacer-DEV@noreply.github.com>
Cc: Subscribed <subscribed@noreply.github.com>
Subject: [jkuusama/LitePlacer-DEV] Software release, 07/09/2018: Manually assisted placement problem (#58)
Manually assisted placement does not always work as expected!
If placing is started by selecting a part in the CAD data table and using the button Place from CAD Data assisted placement does not work! After joging the part to final position hitting ENTER does not start the final placement but moves the part with the nozzle still down!
Starting placing by selecting a part in the Job Data table and using the button Place Selected from Job Data works as intended.
Attached two logs, one where placing was ok, one where it was nor ok. In both cases I directly pushed the ENTER button after the part was moved and positioned over the placement position.
place_jobdata_OK.txt <https://github.com/jkuusama/LitePlacer-DEV/files/2386775/place_jobdata_OK.txt>
place_caddata_buggy.txt <https://github.com/jkuusama/LitePlacer-DEV/files/2386776/place_caddata_buggy.txt>
Looking into the logs at the line PutLoosePartDownAssisted_m: Now fine tune part position. If done press ENTER one can see the different behaviour. In the buggy log it looks like hitting ENTER is restarting the placment job!?
jkuusama, I am not so deep into LitePlacer software and GCode, do you have any idea what went wrong?
Regards
Peter
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub <#58> , or mute the thread <https://github.com/notifications/unsubscribe-auth/AEeI5kO6ePHEkuHJWrkuqV6P_D3JEvalks5uboPQgaJpZM4Wq8Kx> . <https://github.com/notifications/beacon/AEeI5gb-VyTa8Vwk0Ao-USknKfID2RCuks5uboPQgaJpZM4Wq8Kx.gif>
|
I think this is now fixed. Implemented in release 14.08. |
Done in 2019, forgot to close at the time. |
Done in 2019, forgot to close at the time. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Manually assisted placement does not always work as expected!
If placing is started by selecting a part in the CAD data table and using the button Place from CAD Data assisted placement does not work! After joging the part to final position hitting ENTER does not start the final placement but moves the part with the nozzle still down!
Starting placing by selecting a part in the Job Data table and using the button Place Selected from Job Data works as intended.
Attached two logs, one where placing was ok, one where it was nor ok. In both cases I directly pushed the ENTER button after the part was moved and positioned over the placement position.
place_jobdata_OK.txt
place_caddata_buggy.txt
Looking into the logs at the line PutLoosePartDownAssisted_m: Now fine tune part position. If done press ENTER one can see the different behaviour. In the buggy log it looks like hitting ENTER is restarting the placment job!?
jkuusama, I am not so deep into LitePlacer software and GCode, do you have any idea what went wrong?
Regards
Peter
The text was updated successfully, but these errors were encountered: