New definition for ecoTEC plus PROD= 0010019268;SW=0609;HW=5502

[andig]

After solving john30/ebusd#208 (comment) I was able to verify that my bai:

address 00: master #1
address 03: master #11
address 05: slave #1, scanned "MF=Vaillant;ID=COM00;SW=1203;HW=3103"
address 08: slave #11, scanned "MF=Vaillant;ID=BAI00;SW=0609;HW=5502", loaded "vaillant/bai.308523.inc", "vaillant/08.bai.csv"
address 10: master #2
address 15: slave #2, scanned "MF=Vaillant;ID=70000;SW=0510;HW=6403", loaded "vaillant/15.700.csv"
address 31: master #8, ebusd
address 36: slave #8, ebusd
address 52: slave, scanned "MF=Vaillant;ID=VR_70;SW=0109;HW=2903", loaded "vaillant/52.vr_70.csv"

is compatible with bai.0010015600.inc. I've verified for most values that differ from bai.308523.inc that the readings (didn't test writing) produce valid values.

Only its an ecoTEC plus, not a compact.

@john30 what would be a good way to use that config for SW=0609;HW=5502, too? Or copy for the different name?

Might fix #105 and does fix #36 for me.

[john30]

sounds good to me since you've verified that it works. thanks!
it should then be added to the 08.bai.csv.
however, all bai related associations usually require to do it via the product ID. according to one of your previous posts, this would be 0010019268 and consequently, line 16 of bai.csv has to be extended with that value.
could you please do that locally and verify that the right .inc is loaded

[andig]

could you please do that locally and verify that the right .inc is loaded

Will do. It would show up in the scan then as ecoCompact (euro). Is that desired?

[john30]

why is that? where exactly would it appear as ecoCompact?

[andig]

where exactly would it appear as ecoCompact?

I was referring to https://github.com/john30/ebusd-configuration/blob/master/ebusd-2.1.x/de/vaillant/bai.0010015600.inc#L2. Didn't realize that this is not shown in the scan result. All good, thanks for merging ang verified working after restarting container.

[john30]

allright :)