EBUSD Adapter 5.0 HTTP Web Request Post

[physman38]

Hello everyone,
hello @john30

may I kindly ask a help here?

I have a Vaillant System and the Adapter 5.0, which is running fine.
I have a knx system as well with a Gira X1 and a RasPi - later with the EBUSD running.

The EBUS delivers HTTP site like eg.
http://localhost:8088/data/470/hc1OPMode
with response

{
 "470": {
  "messages": {   "Hc1OPMode": {
    "name": "Hc1OPMode",
    "passive": false,
    "write": false,
    "lastup": 1702890606,
    "zz": 21,
    "fields": {
     "0": {"name": "", "value": "auto"}
    }
   }
  }
 },
 "global": {
  "version": "23.2.23.2",
  "updatecheck": "OK, device firmware 1[3c11] available",
  "signal": true,
  "symbolrate": 22,
  "maxsymbolrate": 92,
  "minarbitrationmicros": 2,
  "maxarbitrationmicros": 152,
  "minsymbollatency": 6,
  "maxsymbollatency": 44,
  "qq": 49,
  "reconnects": 0,
  "masters": 3,
  "messages": 459,
  "lastup": 1702890606
 }
}

With the XML/JSON parser on the X1 I can get the values read out.
Via the RasPi I can read values via the

ebusctl read Hc1OPMode

or i can write as well

ebusctl write -c 470 Hc1OPMode "2"

My question:
can I somehow via an HTTP Web Request POST set the Hc1OPMode?
What would be the code?

Thanks for you help!

[john30]

sure, see the wiki: https://github.com/john30/ebusd/wiki/3.2.-HTTP-client
or the openapi file: https://github.com/john30/ebusd/blob/master/contrib/html/openapi.yaml

[physman38]

Thanks @john30 !
However, I have still 2 question and ask kindly for advise:

1. for the HTTP readings and when I have done the Logik in the X1, I poll in X1 every 10sec, however the EBUSD does not update. Seems he is not sending data. Is my config maybe wrong?

EBUSD_OPTS="--configpath=/etc/ebusd/ebusd-configuration/ebusd-2.1.x/de --scanconfig=full -d enh:xxx.xxx.xxx.xxxx:9999 --pollinterval=30 --accesslevel=* --mqtthost=xxx.x.x.x --mqttport=8999 --mqttuser=USER --mqttpass=PASSWORD --httpport=8088 --mqttjson"

I do use as http line in X1 with the WebRequest Get method:
http://xxx.xxx.xxx.xxx:8088/data?required&poll=2&write

2. can you give me an easy example for writing to the EBUSD via http post?

many many thanks in advance

[felix-schwarz]

Did you find out how to write a value via HTTP @physman38?

I'm currently struggling to replace

ebusctl write -c 700 HwcSFMode load

with a HTTP request.

Any help would be most welcome.

[physman38]

Unfortunately not..

[felix-schwarz]

Thanks for the reply. Are you using any alternative then? Like MQTT or directly running the ebusctl command?

[physman38]

I'm using MQTT for writing and HTTP for reading, as I have a GIRA X1, but the MQTT logic does seem to have some issues for reading I think.
So I'm as well interested to know how one can set anything via HTTP write....