HA Addon ebusd / tado / no MQTT data refresh

[Dominik-1980]

Description

I use tado as room thermostat.
When I start ebusd HA Addon, the values I specified with priority 1 in the bai file (Flame / WaterPressure) where synced every 2 seconds like I configured. For testing I set this to 2 sec instead of 5...
So far so good. But at the moment the communication with tado starts to show up in the logs these values are not synced anymore.

I marked the position in the log file where these values are not synced any more...

Actual behavior

No MQTT values are synced while communicating with tado

Expected behavior

Monitor specified values with ebusd and MQTT in HA besides tado controlling the heater

ebusd version

23.2

ebusd arguments

none

Operating system

Debian 12 (Bookworm) / Ubuntu 22-23 / Raspberry Pi OS 12 (including lite)

CPU architecture

arm64

Dockerized

latest

Hardware interface

Adapter Shield v5 via WiFi

Related integration

No response

Logs

2024-02-19 16:43:02.360 [update notice] sent scan-read scan.08 QQ=31: Vaillant;BAI00;1003;7603
2024-02-19 16:43:02.360 [bus notice] scan 08: ;Vaillant;BAI00;1003;7603
2024-02-19 16:43:02.377 [main notice] read common config file vaillant/broadcast.csv
2024-02-19 16:43:02.378 [main notice] read common config file vaillant/scan.csv
2024-02-19 16:43:02.380 [main notice] read common config file vaillant/general.csv
2024-02-19 16:43:02.382 [main notice] read scan config file vaillant/08.bai.csv for ID "bai00", SW1003, HW7603
2024-02-19 16:43:02.635 [update notice] sent scan-read scan.08 id QQ=31:
2024-02-19 16:43:02.917 [update notice] sent scan-read scan.08 id QQ=31:
2024-02-19 16:43:03.735 [update notice] sent scan-read scan.08 id QQ=31:
2024-02-19 16:43:03.995 [update notice] sent scan-read scan.08 id QQ=31: 21;23;26;0010025210;1610;007720;N0
2024-02-19 16:43:04.020 [main notice] found messages: 224 (3 conditional on 28 conditions, 2 poll, 10 update)
2024-02-19 16:43:04.283 [update notice] sent poll-read bai WaterPressure QQ=31: 1.532;ok
2024-02-19 16:43:04.556 [update notice] sent scan-read scan.08 id QQ=31: 21;23;26;0010025210;1610;007720;N0
2024-02-19 16:43:04.815 [update notice] sent scan-read scan.08 id QQ=31: 21;23;26;0010025210;1610;007720;N0
2024-02-19 16:43:04.995 [update notice] received unknown MS cmd: 1008b5110100 / 0917040f4b040f00813d
2024-02-19 16:43:05.225 [update notice] sent scan-read scan.08 id QQ=31: 21;23;26;0010025210;1610;007720;N0
2024-02-19 16:43:05.495 [update notice] sent scan-read scan.08 id QQ=31: 21;23;26;0010025210;1610;007720;N0
2024-02-19 16:43:05.495 [bus notice] scan 08: ;21;23;26;0010025210;1610;007720;N0
2024-02-19 16:43:05.836 [update notice] received read bai Status01 QQ=10: 65.0;55.5;-;40.0;41.0;on
2024-02-19 16:43:06.847 [update notice] received read bai Status02 QQ=10: auto;30;75.0;90;65.0
2024-02-19 16:43:07.286 [update notice] sent poll-read bai Flame QQ=31: on
2024-02-19 16:43:07.735 [bus notice] scan 15: ;Vaillant;37000;0129;6002
2024-02-19 16:43:07.735 [update notice] store 15 ident: done
2024-02-19 16:43:07.736 [update notice] sent scan-read scan.15 QQ=31: Vaillant;37000;0129;6002
2024-02-19 16:43:07.736 [bus notice] scan 15: ;Vaillant;37000;0129;6002
2024-02-19 16:43:07.865 [update notice] received poll-read bai currenterror QQ=10: -;-;-;-;-
2024-02-19 16:43:08.104 [main notice] read scan config file vaillant/15.370.csv for ID "37000", SW0129, HW6002
2024-02-19 16:43:08.112 [main notice] found messages: 368 (3 conditional on 28 conditions, 162 poll, 10 update)
2024-02-19 16:43:08.812 [update notice] received unknown MS cmd: 1008b509030d4a00 / 00
2024-02-19 16:43:09.815 [update notice] received poll-read bai HwcWaterflow QQ=10: 0.00
2024-02-19 16:43:10.296 [update notice] sent poll-read bai WaterPressure QQ=31: 1.523;ok
2024-02-19 16:43:10.825 [update notice] received poll-read bai HcHours QQ=10: 1414
2024-02-19 16:43:11.835 [update notice] received poll-read bai HwcHours QQ=10: 39
2024-02-19 16:43:12.941 [update notice] received poll-read bai HwcStarts QQ=10: 700
2024-02-19 16:43:13.190 [bus error] poll bai Flame failed: ERR: read timeout
2024-02-19 16:43:13.682 [bus notice] arbitration won in invalid state ready
2024-02-19 16:43:13.934 [update notice] received poll-read bai HcStarts QQ=10: 3000
2024-02-19 16:43:14.828 [update notice] received poll-read bai CirPump QQ=10: on
2024-02-19 16:43:15.826 [update notice] received unknown MS cmd: 1008b509030d7300 / 014c
2024-02-19 16:43:16.241 [update notice] sent poll-read bai WaterPressure QQ=31: 1.523;ok
2024-02-19 16:43:16.848 [update notice] received poll-read bai Gasvalve QQ=10: on
2024-02-19 16:43:17.856 [update notice] received poll-read bai FlowTempDesired QQ=10: 65.50
2024-02-19 16:43:18.856 [update notice] received poll-read bai IonisationVoltageLevel QQ=10: 0.0
2024-02-19 16:43:19.276 [update notice] sent poll-read bai Flame QQ=31: on
2024-02-19 16:43:21.978 [update notice] received update-write bai SetMode QQ=10: auto;65.5;45.0;-;0;0;0;0;0;0
2024-02-19 16:43:22.096 [update notice] received unknown MS cmd: 1008b51003055a00 / 0101
2024-02-19 16:43:22.341 [update notice] sent poll-read bai WaterPressure QQ=31: 1.532;ok
2024-02-19 16:43:24.056 [bus error] signal lost
2024-02-19 16:43:24.169 [bus notice] signal acquired
2024-02-19 16:43:25.596 [update notice] sent poll-read bai Flame QQ=31: on
2024-02-19 16:43:26.987 [update notice] received unknown MS cmd: 1008b5110100 / 0919040f4b040f00813c
2024-02-19 16:43:28.016 [update notice] received read bai Status01 QQ=10: 65.5;56.0;-;40.0;41.0;on
2024-02-19 16:43:28.277 [update notice] sent poll-read bai WaterPressure QQ=31: 1.523;ok
2024-02-19 16:43:28.993 [update notice] received read bai Status02 QQ=10: auto;30;75.0;90;65.0
2024-02-19 16:43:30.037 [update notice] received poll-read bai currenterror QQ=10: -;-;-;-;-
2024-02-19 16:43:30.985 [update notice] received unknown MS cmd: 1008b509030d4a00 / 00
2024-02-19 16:43:31.276 [update notice] sent poll-read bai Flame QQ=31: on
2024-02-19 16:43:31.986 [update notice] received poll-read bai HwcWaterflow QQ=10: 0.00
2024-02-19 16:43:32.985 [update notice] received poll-read bai HcHours QQ=10: 1414
2024-02-19 16:43:33.986 [update notice] received poll-read bai HwcHours QQ=10: 39
2024-02-19 16:43:34.665 [bus error] poll bai WaterPressure failed: ERR: SYN received
2024-02-19 16:43:34.967 [update notice] received poll-read bai HwcStarts QQ=10: 700
2024-02-19 16:43:35.976 [update notice] received poll-read bai HcStarts QQ=10: 3000
2024-02-19 16:43:36.968 [update notice] received poll-read bai CirPump QQ=10: on
2024-02-19 16:43:37.255 [update notice] sent poll-read bai Flame QQ=31: on

---- here is the moment when tado came in and Flame and WaterPressure are not updated any more ----

2024-02-19 16:43:38.003 [update notice] received unknown MS cmd: 1008b509030d7300 / 014c
2024-02-19 16:43:39.006 [update notice] received poll-read bai Gasvalve QQ=10: on
2024-02-19 16:43:40.005 [update notice] received poll-read bai FlowTempDesired QQ=10: 65.50
2024-02-19 16:43:40.255 [update notice] sent poll-read bai AccessoriesOne QQ=31: 0
2024-02-19 16:43:41.006 [update notice] received poll-read bai IonisationVoltageLevel QQ=10: 0.0
2024-02-19 16:43:43.333 [update notice] sent poll-read bai AccessoriesTwo QQ=31: circulationpump
2024-02-19 16:43:44.152 [update notice] received update-write bai SetMode QQ=10: auto;65.5;45.0;-;0;0;0;0;0;0
2024-02-19 16:43:44.265 [update notice] received unknown MS cmd: 1008b51003055a00 / 0101
2024-02-19 16:43:46.095 [update notice] received update-write bai StatusCirPump QQ=10: on
2024-02-19 16:43:46.290 [update notice] sent poll-read bai ACRoomthermostat QQ=31: off
2024-02-19 16:43:49.136 [update notice] received unknown MS cmd: 1008b5110100 / 0917040f4a040f00813c
2024-02-19 16:43:49.336 [update notice] sent poll-read bai averageIgnitiontime QQ=31: 2.5
2024-02-19 16:43:50.158 [update notice] received read bai Status01 QQ=10: 65.0;56.0;-;40.0;41.0;on
2024-02-19 16:43:51.126 [update notice] received read bai Status02 QQ=10: auto;30;75.0;90;65.0
2024-02-19 16:43:52.171 [update notice] received poll-read bai currenterror QQ=10: -;-;-;-;-
2024-02-19 16:43:52.455 [update notice] sent poll-read bai BlockTimeHcMax QQ=31: 1
2024-02-19 16:43:52.475 [bus notice] arbitration won in invalid state ready
2024-02-19 16:43:53.112 [update notice] received unknown MS cmd: 1008b509030d4a00 / 00
2024-02-19 16:43:54.114 [update notice] received poll-read bai HwcWaterflow QQ=10: 0.00
2024-02-19 16:43:55.116 [update notice] received poll-read bai HcHours QQ=10: 1414
2024-02-19 16:43:55.376 [update notice] sent poll-read bai BoilerType QQ=31: 2
2024-02-19 16:43:56.127 [update notice] received poll-read bai HwcHours QQ=10: 39
2024-02-19 16:43:57.128 [update notice] received poll-read bai HwcStarts QQ=10: 700
2024-02-19 16:43:58.135 [update notice] received poll-read bai HcStarts QQ=10: 3000
2024-02-19 16:43:58.365 [update notice] sent poll-read bai ChangesDSN QQ=31: 0
2024-02-19 16:43:59.156 [update notice] received poll-read bai CirPump QQ=10: on
2024-02-19 16:44:00.155 [update notice] received unknown MS cmd: 1008b509030d7300 / 014c
2024-02-19 16:44:01.156 [update notice] received poll-read bai Gasvalve QQ=10: on
2024-02-19 16:44:02.158 [update notice] received poll-read bai FlowTempDesired QQ=10: 65.50
2024-02-19 16:44:03.167 [update notice] received poll-read bai IonisationVoltageLevel QQ=10: 0.0
2024-02-19 16:44:04.276 [update notice] sent poll-read bai CounterStartattempts1 QQ=31: 0
2024-02-19 16:44:06.276 [update notice] received update-write bai SetMode QQ=10: auto;65.5;45.0;-;0;0;0;0;0;0
2024-02-19 16:44:06.395 [update notice] received unknown MS cmd: 1008b51003055a00 / 0101
2024-02-19 16:44:07.392 [update notice] sent poll-read bai CounterStartattempts2 QQ=31: 0
2024-02-19 16:44:08.256 [update notice] received update-write bai StatusCirPump QQ=10: on

[john30]

no idea. is this tado thing connected to ebus or how would it influence ebusd in the first place?

[wrongisthenewright]

Don't own a tado bu i was looking at it before settling all my needs with Ebusd :)

Taso thermostat is compatible with Ebus and it writes on the bus to control the HVAC system.
This page states compatibility:

https://support.tado.com/de/articles/3387245-ist-tado-mit-meiner-therme-kompatibel

Thanks John!

[john30]

maybe it is just an address conflict, so check the result of "ebusctl info" for that and post the list of found addresses