Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Full value sent to home assistant instead of change only. #3117

Open
araminimichael opened this issue Jun 17, 2024 · 0 comments
Open

Full value sent to home assistant instead of change only. #3117

araminimichael opened this issue Jun 17, 2024 · 0 comments
Labels
bug Something isn't working

Comments

@araminimichael
Copy link

The Problem

Since the last version (I went from 15..) to Release: v15.7.0 (Commit: 0d0b018+) due to a dead SD card.

I did a clean install with reflashing but periodically the full value is sent to home assistant (via mqtt) instead of just the change. I have another device that doesn't seem to have the problem. However, both devices have the same versions, the same SD card (new) and the same configuration except the name and IP.

Exemple in image
SmartSelect_20240618_010738_Chrome
SmartSelect_20240618_010755_Home Assistant
SmartSelect_20240618_010805_Home Assistant
We can see that the value detected is received on home assistant is identical (differences of 1) the next day I have no problem with this same device.

I don't have any logs from today (it says failed to load) but those from previous days are readable. I put the most recent.

Thank you very much for this great project and the time you put into it. It's great for me, who is an old meter, to be able to follow my consumption.

Version

Release: v15.7.0 (Commit: 0d0b018+)

Logfile

[0d00h00m00s] 2024-06-13T04:23:05	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-06-13T04:23:05	<INF>	[MAIN] ==================== Start ======================
[0d00h00m00s] 2024-06-13T04:23:05	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-06-13T04:23:05	<INF>	[MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-06-13T04:23:05	<INF>	[MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2024-06-13T04:23:10	<INF>	[MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2024-06-13T04:23:10	<INF>	[SDCARD] Basic R/W check started...
[0d00h00m04s] 2024-06-13T04:23:10	<INF>	[SDCARD] Basic R/W check successful
[0d00h00m04s] 2024-06-13T04:23:10	<INF>	[SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2024-06-13T04:23:10	<INF>	[SNTP] Configuring NTP Client...
[0d00h00m04s] 2024-06-13T06:23:10	<INF>	[SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2024-06-13T06:23:10	<INF>	[SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m04s] 2024-06-13T06:23:10	<INF>	[SNTP] Time is already set: 2024-06-13 06:23:10
[0d00h00m04s] 2024-06-13T06:23:10	<INF>	[MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[SDCARD] Folder/file presence check started...
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[SDCARD] Folder/file presence check successful
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[MAIN] Reset reason: Brownout
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[WLANINI] SSID: IOT-Device
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[WLANINI] Hostname: mainpowermeter
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[WLANINI] IP-Address: 192.168.1.60
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[WLANINI] Gateway: 192.168.1.1
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[WLANINI] Netmask: 255.255.255.0
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[WLANINI] DNS: 192.168.1.76
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[WLANINI] RSSIThreshold: 0
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2024-06-13T06:23:10	<INF>	[WIFI] Manual interface config -> IP: 192.168.1.60, Gateway: 192.168.1.1, Netmask: 255.255.255.0
[0d00h00m05s] 2024-06-13T06:23:11	<INF>	[WIFI] Manual interface config -> DNS: 192.168.1.76
[0d00h00m05s] 2024-06-13T06:23:11	<INF>	[WIFI] Set hostname to: mainpowermeter
[0d00h00m05s] 2024-06-13T06:23:11	<INF>	[WIFI] Init successful
[0d00h00m07s] 2024-06-13T06:23:13	<WRN>	[WIFI] Disconnected (202, Auth fail)
[0d00h00m10s] 2024-06-13T06:23:16	<WRN>	[WIFI] Disconnected (205)
[0d00h00m00s] 2024-06-13T04:23:20	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-06-13T04:23:20	<INF>	[MAIN] ==================== Start ======================
[0d00h00m00s] 2024-06-13T04:23:20	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-06-13T04:23:20	<INF>	[MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-06-13T04:23:20	<INF>	[MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2024-06-13T04:23:24	<INF>	[MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2024-06-13T04:23:24	<INF>	[SDCARD] Basic R/W check started...
[0d00h00m04s] 2024-06-13T04:23:24	<INF>	[SDCARD] Basic R/W check successful
[0d00h00m04s] 2024-06-13T04:23:24	<INF>	[SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2024-06-13T04:23:24	<INF>	[SNTP] Configuring NTP Client...
[0d00h00m04s] 2024-06-13T06:23:24	<INF>	[SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2024-06-13T06:23:24	<INF>	[SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m04s] 2024-06-13T06:23:24	<INF>	[SNTP] Time is already set: 2024-06-13 06:23:24
[0d00h00m04s] 2024-06-13T06:23:24	<INF>	[MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[SDCARD] Folder/file presence check started...
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[SDCARD] Folder/file presence check successful
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[MAIN] Reset reason: Brownout
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[WLANINI] SSID: IOT-Device
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[WLANINI] Hostname: mainpowermeter
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[WLANINI] IP-Address: 192.168.1.60
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[WLANINI] Gateway: 192.168.1.1
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[WLANINI] Netmask: 255.255.255.0
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[WLANINI] DNS: 192.168.1.76
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[WLANINI] RSSIThreshold: 0
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[WIFI] Manual interface config -> IP: 192.168.1.60, Gateway: 192.168.1.1, Netmask: 255.255.255.0
[0d00h00m05s] 2024-06-13T06:23:25	<INF>	[WIFI] Manual interface config -> DNS: 192.168.1.76
[0d00h00m00s] 2024-06-13T04:23:27	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-06-13T04:23:27	<INF>	[MAIN] ==================== Start ======================
[0d00h00m00s] 2024-06-13T04:23:27	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-06-13T04:23:27	<INF>	[MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-06-13T04:23:27	<INF>	[MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2024-06-13T04:23:31	<INF>	[MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2024-06-13T04:23:31	<INF>	[SDCARD] Basic R/W check started...
[0d00h00m04s] 2024-06-13T04:23:31	<INF>	[SDCARD] Basic R/W check successful
[0d00h00m04s] 2024-06-13T04:23:31	<INF>	[SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2024-06-13T04:23:31	<INF>	[SNTP] Configuring NTP Client...
[0d00h00m04s] 2024-06-13T06:23:31	<INF>	[SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2024-06-13T06:23:31	<INF>	[SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m04s] 2024-06-13T06:23:31	<INF>	[SNTP] Time is already set: 2024-06-13 06:23:31
[0d00h00m04s] 2024-06-13T06:23:31	<INF>	[MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[SDCARD] Folder/file presence check started...
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[SDCARD] Folder/file presence check successful
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[MAIN] Reset reason: Brownout
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[WLANINI] SSID: IOT-Device
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[WLANINI] Hostname: mainpowermeter
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[WLANINI] IP-Address: 192.168.1.60
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[WLANINI] Gateway: 192.168.1.1
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[WLANINI] Netmask: 255.255.255.0
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[WLANINI] DNS: 192.168.1.76
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[WLANINI] RSSIThreshold: 0
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[WIFI] Manual interface config -> IP: 192.168.1.60, Gateway: 192.168.1.1, Netmask: 255.255.255.0
[0d00h00m05s] 2024-06-13T06:23:32	<INF>	[WIFI] Manual interface config -> DNS: 192.168.1.76
[0d00h00m00s] 2024-06-13T04:23:34	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-06-13T04:23:34	<INF>	[MAIN] ==================== Start ======================
[0d00h00m00s] 2024-06-13T04:23:34	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-06-13T04:23:34	<INF>	[MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-06-13T04:23:34	<INF>	[MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2024-06-13T04:23:38	<INF>	[MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2024-06-13T04:23:38	<INF>	[SDCARD] Basic R/W check started...
[0d00h00m04s] 2024-06-13T04:23:38	<INF>	[SDCARD] Basic R/W check successful
[0d00h00m04s] 2024-06-13T04:23:38	<INF>	[SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2024-06-13T04:23:38	<INF>	[SNTP] Configuring NTP Client...
[0d00h00m04s] 2024-06-13T06:23:38	<INF>	[SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2024-06-13T06:23:38	<INF>	[SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m04s] 2024-06-13T06:23:38	<INF>	[SNTP] Time is already set: 2024-06-13 06:23:38
[0d00h00m04s] 2024-06-13T06:23:38	<INF>	[MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[SDCARD] Folder/file presence check started...
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[SDCARD] Folder/file presence check successful
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[MAIN] Reset reason: Brownout
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WLANINI] SSID: IOT-Device
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WLANINI] Hostname: mainpowermeter
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WLANINI] IP-Address: 192.168.1.60
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WLANINI] Gateway: 192.168.1.1
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WLANINI] Netmask: 255.255.255.0
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WLANINI] DNS: 192.168.1.76
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WLANINI] RSSIThreshold: 0
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WIFI] Manual interface config -> IP: 192.168.1.60, Gateway: 192.168.1.1, Netmask: 255.255.255.0
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WIFI] Manual interface config -> DNS: 192.168.1.76
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WIFI] Set hostname to: mainpowermeter
[0d00h00m05s] 2024-06-13T06:23:39	<INF>	[WIFI] Init successful
[0d00h00m07s] 2024-06-13T06:23:42	<INF>	[WIFI] Connected to: IOT-Device, RSSI: -65
[0d00h00m07s] 2024-06-13T06:23:42	<INF>	[WIFI] Assigned IP: 192.168.1.60
[0d00h00m10s] 2024-06-13T06:22:41	<INF>	[SNTP] Time is synced with NTP Server pool.ntp.org: 2024-06-13 06:22:41
[0d00h00m11s] 2024-06-13T06:22:41	<INF>	[MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m11s] 2024-06-13T06:22:41	<INF>	[MAIN] SD card info: Name: asdfg, Capacity: 7680MB, Free: 7653MB
[0d00h00m13s] 2024-06-13T06:22:43	<INF>	[MAIN] Initialization completed successfully
[0d00h00m15s] 2024-06-13T06:22:45	<INF>	[LOGFILE] Set log level to ERROR

Expected Behavior

The expected behavior is to receive only the change value (the difference) and not an integer value.

Screenshots

I'll put it back here if it's not visible in my first message.
(The mainpowermeter7 is because 4,5,6 the same error appened since the update) and on home assistant it is impossible to delete a value. Or at least impossible for me, because I don't know how to do database manipulation).
SmartSelect_20240618_010738_Chrome
SmartSelect_20240618_010755_Home Assistant
SmartSelect_20240618_010805_Home Assistant
20240618_012108

Additional Context

No response
@araminimichael araminimichael added the bug Something isn't working label Jun 17, 2024
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
bug Something isn't working
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@araminimichael