local-up-cluster.sh

#!/bin/bash

# Copyright 2014 The Kubernetes Authors All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This command builds and runs a local kubernetes cluster. It's just like
# local-up.sh, but this one launches the three separate binaries.
# You may need to run this as root to allow kubelet to open docker's socket.
DOCKER_OPTS=${DOCKER_OPTS:-""}
DOCKER_NATIVE=${DOCKER_NATIVE:-""}
DOCKER=(docker ${DOCKER_OPTS})
DOCKERIZE_KUBELET=${DOCKERIZE_KUBELET:-""}
ALLOW_PRIVILEGED=${ALLOW_PRIVILEGED:-""}
KUBE_ROOT=$(dirname "${BASH_SOURCE}")/..
cd "${KUBE_ROOT}"

if [ "$(id -u)" != "0" ]; then
    echo "WARNING : This script MAY be run as root for docker socket / iptables functionality... if failures occur... Retry as root." 2>&1
fi

# Stop right away if the build fails
set -e

source "${KUBE_ROOT}/hack/lib/init.sh"

function usage {
            echo "This script starts a local kube cluster. "
            echo "Example 1: hack/local-up-cluster.sh -o _output/dockerized/bin/linux/amd64/ (run from docker output)"
            echo "Example 2: hack/local-up-cluster.sh (build a local copy of the source)"
}

### Allow user to supply the source directory.
GO_OUT=""
while getopts "o:" OPTION
do
    case $OPTION in
        o) 
            echo "skipping build"
            echo "using source $OPTARG"
            GO_OUT="$OPTARG"
            if [ $GO_OUT == "" ]; then
                echo "You provided an invalid value for the build output directory."
                exit 
            fi
            ;;
        ?)
            usage    
            exit
            ;;
    esac
done

if [ "x$GO_OUT" == "x" ]; then
    "${KUBE_ROOT}/hack/build-go.sh"
else
    echo "skipped the build."
fi

function test_docker {
    ${DOCKER[@]} ps 2> /dev/null 1> /dev/null
    if [ "$?" != "0" ]; then
      echo "Failed to successfully run 'docker ps', please verify that docker is installed and \$DOCKER_HOST is set correctly."
      exit 1
    fi
}

# Shut down anyway if there's an error.
set +e

API_PORT=${API_PORT:-8080}
API_HOST=${API_HOST:-127.0.0.1}
# By default only allow CORS for requests on localhost
API_CORS_ALLOWED_ORIGINS=${API_CORS_ALLOWED_ORIGINS:-"/127.0.0.1(:[0-9]+)?$,/localhost(:[0-9]+)?$"}
KUBELET_PORT=${KUBELET_PORT:-10250}
LOG_LEVEL=${LOG_LEVEL:-3}
CONTAINER_RUNTIME=${CONTAINER_RUNTIME:-"docker"}
CHAOS_CHANCE=${CHAOS_CHANCE:-0.0}

function test_apiserver_off {
    # For the common local scenario, fail fast if server is already running.
    # this can happen if you run local-up-cluster.sh twice and kill etcd in between.
    curl $API_HOST:$API_PORT
    if [ ! $? -eq 0 ]; then
        echo "API SERVER port is free, proceeding..."
    else
        echo "ERROR starting API SERVER, exiting.  Some host on $API_HOST is serving already on $API_PORT"
        exit 1
    fi
}

function detect_binary {
    # Detect the OS name/arch so that we can find our binary
    case "$(uname -s)" in
      Darwin)
        host_os=darwin
        ;;
      Linux)
        host_os=linux
        ;;
      *)
        echo "Unsupported host OS.  Must be Linux or Mac OS X." >&2
        exit 1
        ;;
    esac

    case "$(uname -m)" in
      x86_64*)
        host_arch=amd64
        ;;
      i?86_64*)
        host_arch=amd64
        ;;
      amd64*)
        host_arch=amd64
        ;;
      arm*)
        host_arch=arm
        ;;
      i?86*)
        host_arch=x86
        ;;
      *)
        echo "Unsupported host arch. Must be x86_64, 386 or arm." >&2
        exit 1
        ;;
    esac

   GO_OUT="${KUBE_ROOT}/_output/local/bin/${host_os}/${host_arch}"
}

cleanup_dockerized_kubelet()
{
  if [[ -e $KUBELET_CIDFILE ]]; then 
    docker kill $(<$KUBELET_CIDFILE) > /dev/null
    rm -f $KUBELET_CIDFILE
  fi
}

cleanup()
{
  echo "Cleaning up..."
  # Check if the API server is still running
  [[ -n "${APISERVER_PID-}" ]] && APISERVER_PIDS=$(pgrep -P ${APISERVER_PID} ; ps -o pid= -p ${APISERVER_PID})
  [[ -n "${APISERVER_PIDS-}" ]] && sudo kill ${APISERVER_PIDS}

  # Check if the controller-manager is still running
  [[ -n "${CTLRMGR_PID-}" ]] && CTLRMGR_PIDS=$(pgrep -P ${CTLRMGR_PID} ; ps -o pid= -p ${CTLRMGR_PID})
  [[ -n "${CTLRMGR_PIDS-}" ]] && sudo kill ${CTLRMGR_PIDS}

  if [[ -n "$DOCKERIZE_KUBELET" ]]; then
    cleanup_dockerized_kubelet
  else
    # Check if the kubelet is still running
    [[ -n "${KUBELET_PID-}" ]] && KUBELET_PIDS=$(pgrep -P ${KUBELET_PID} ; ps -o pid= -p ${KUBELET_PID})
    [[ -n "${KUBELET_PIDS-}" ]] && sudo kill ${KUBELET_PIDS}
  fi

  # Check if the proxy is still running
  [[ -n "${PROXY_PID-}" ]] && PROXY_PIDS=$(pgrep -P ${PROXY_PID} ; ps -o pid= -p ${PROXY_PID})
  [[ -n "${PROXY_PIDS-}" ]] && sudo kill ${PROXY_PIDS}

  # Check if the scheduler is still running
  [[ -n "${SCHEDULER_PID-}" ]] && SCHEDULER_PIDS=$(pgrep -P ${SCHEDULER_PID} ; ps -o pid= -p ${SCHEDULER_PID})
  [[ -n "${SCHEDULER_PIDS-}" ]] && sudo kill ${SCHEDULER_PIDS}

  # Check if the etcd is still running
  [[ -n "${ETCD_PID-}" ]] && kube::etcd::stop
  [[ -n "${ETCD_DIR-}" ]] && kube::etcd::clean_etcd_dir

  exit 0
}

function startETCD {
    echo "Starting etcd"
    kube::etcd::start
}

function set_service_accounts {
    SERVICE_ACCOUNT_LOOKUP=${SERVICE_ACCOUNT_LOOKUP:-false}
    SERVICE_ACCOUNT_KEY=${SERVICE_ACCOUNT_KEY:-"/tmp/kube-serviceaccount.key"}
    # Generate ServiceAccount key if needed
    if [[ ! -f "${SERVICE_ACCOUNT_KEY}" ]]; then
      mkdir -p "$(dirname ${SERVICE_ACCOUNT_KEY})"
      openssl genrsa -out "${SERVICE_ACCOUNT_KEY}" 2048 2>/dev/null
    fi
}

function start_apiserver {
    # Admission Controllers to invoke prior to persisting objects in cluster
    ADMISSION_CONTROL=NamespaceLifecycle,NamespaceAutoProvision,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota

    priv_arg=""
    if [[ -n "${ALLOW_PRIVILEGED}" ]]; then
      priv_arg="--allow-privileged "
    fi

    APISERVER_LOG=/tmp/kube-apiserver.log
    sudo -E "${GO_OUT}/kube-apiserver" ${priv_arg}\
      --v=${LOG_LEVEL} \
      --service_account_key_file="${SERVICE_ACCOUNT_KEY}" \
      --service_account_lookup="${SERVICE_ACCOUNT_LOOKUP}" \
      --admission_control="${ADMISSION_CONTROL}" \
      --address="${API_HOST}" \
      --port="${API_PORT}" \
      --etcd_servers="http://127.0.0.1:4001" \
      --service-cluster-ip-range="10.0.0.0/24" \
      --cors_allowed_origins="${API_CORS_ALLOWED_ORIGINS}" >"${APISERVER_LOG}" 2>&1 &
    APISERVER_PID=$!

    # Wait for kube-apiserver to come up before launching the rest of the components.
    echo "Waiting for apiserver to come up"
    kube::util::wait_for_url "http://${API_HOST}:${API_PORT}/api/v1/pods" "apiserver: " 1 10 || exit 1
}

function start_controller_manager {
    CTLRMGR_LOG=/tmp/kube-controller-manager.log
    sudo -E "${GO_OUT}/kube-controller-manager" \
      --v=${LOG_LEVEL} \
      --service_account_private_key_file="${SERVICE_ACCOUNT_KEY}" \
      --master="${API_HOST}:${API_PORT}" >"${CTLRMGR_LOG}" 2>&1 &
    CTLRMGR_PID=$!
}

function start_kubelet {
    KUBELET_LOG=/tmp/kubelet.log
    if [[ -z "${DOCKERIZE_KUBELET}" ]]; then
      sudo -E "${GO_OUT}/kubelet" ${priv_arg}\
        --v=${LOG_LEVEL} \
        --chaos_chance="${CHAOS_CHANCE}" \
        --container_runtime="${CONTAINER_RUNTIME}" \
        --hostname_override="127.0.0.1" \
        --address="127.0.0.1" \
        --api_servers="${API_HOST}:${API_PORT}" \
        --port="$KUBELET_PORT" >"${KUBELET_LOG}" 2>&1 &
      KUBELET_PID=$!
    else
      # Docker won't run a container with a cidfile (container id file)
      # unless that file does not already exist; clean up an existing
      # dockerized kubelet that might be running.
      cleanup_dockerized_kubelet

      docker run \
        --volume=/:/rootfs:ro \
        --volume=/var/run:/var/run:rw \
        --volume=/sys:/sys:ro \
        --volume=/var/lib/docker/:/var/lib/docker:ro \
        --volume=/var/lib/kubelet/:/var/lib/kubelet:rw \
        --net=host \
        --privileged=true \
        -i \
        --cidfile=$KUBELET_CIDFILE \
        gcr.io/google_containers/kubelet \
        /kubelet --v=3 --containerized ${priv_arg}--chaos-chance="${CHAOS_CHANCE}" --hostname-override="127.0.0.1" --address="127.0.0.1" --api-servers="${API_HOST}:${API_PORT}" --port="$KUBELET_PORT" --resource-container="" &> $KUBELET_LOG &
    fi
}

function start_kubeproxy {
    PROXY_LOG=/tmp/kube-proxy.log
    sudo -E "${GO_OUT}/kube-proxy" \
      --v=${LOG_LEVEL} \
      --master="http://${API_HOST}:${API_PORT}" >"${PROXY_LOG}" 2>&1 &
    PROXY_PID=$!

    SCHEDULER_LOG=/tmp/kube-scheduler.log
    sudo -E "${GO_OUT}/kube-scheduler" \
      --v=${LOG_LEVEL} \
      --master="http://${API_HOST}:${API_PORT}" >"${SCHEDULER_LOG}" 2>&1 &
    SCHEDULER_PID=$!
}

function print_success {
cat <<EOF
Local Kubernetes cluster is running. Press Ctrl-C to shut it down.

Logs:
  ${APISERVER_LOG}
  ${CTLRMGR_LOG}
  ${PROXY_LOG}
  ${SCHEDULER_LOG}
  ${KUBELET_LOG}

To start using your cluster, open up another terminal/tab and run:

  cluster/kubectl.sh config set-cluster local --server=http://${API_HOST}:${API_PORT} --insecure-skip-tls-verify=true
  cluster/kubectl.sh config set-context local --cluster=local
  cluster/kubectl.sh config use-context local
  cluster/kubectl.sh
EOF
}

test_docker
test_apiserver_off

### IF the user didn't supply an output/ for the build... Then we detect.
if [ "$GO_OUT" == "" ]; then 
    detect_binary
fi
echo "Detected host and ready to start services.  Doing some housekeeping first..."
echo "Using GO_OUT $GO_OUT"
KUBELET_CIDFILE=/tmp/kubelet.cid
trap cleanup EXIT
echo "Starting services now!"
startETCD
set_service_accounts
start_apiserver
start_controller_manager
start_kubelet
start_kubeproxy
print_success

while true; do sleep 1; done